Trying to connect Xbox to desktop using ICS

Similar Questions

• BlackBerry Smartphones trying to connect with the desktop software for my blackberry

  Hey, M trying to connect with the desktop software for my blackberry torch 9800 and it asks password for the connection. I am using same unlock password I use for my bb but for desktop sofware it shows incorrect... pls help!

  Make sure that you type on your BB, it's what you type in DM. don't forget that the keyboard on your BB is different from the keyboard on your PC. Some people think they are type numbers on their BlackBerry when they are really typing the letters. For example, to use numbers on a BB you must hold the ALT for each button, you push so you have to hold the alt key while typing 1 2 3 4. If you hold down the ALT key on the BB you would really be typed all W E R S. sometimes, people will hit the ALT key once (and not hold the button) before they enter the password and then you get 1 E R S.

  Who is? Make sure that you do not mix numbers and letters.

• Trying to connect Xbox 360 to Internet using laptop with Windows 7, but am not finding the 'Share' button in the network connections and I don't have the ability to "bridge connections".

  Sorry about the long title, but it pretty much says my problem. I am trying to connect my Xbox 360 to my Windows7 laptop with the ethernet cable. I have a home network that the wireless laptop works out of. When I go into the control panel network connections section, I can't find the 'Sharing' tab that says that every tutorial I can find there should be. Tutorials can say to go to the screen that shows your wireless connections, highlight your home network and the network to your Xbox and then right click and press "bridge connections". I do not have the option for bridge connections. Can anyone help?

  After having connected the laptop and Xbox with an Ethernet cable, you should be able to enable sharing of Internet connection on the wireless network connection:

  1. Make sure that the two network connections are enabled.
  2. Right click on the wireless network connection.
  3. Click on Properties .
  4. Click sharing .
  5. Put a check mark in the check box under Internet connection sharing .
  6. Click OK .

  After you enable ICS, not bridging the connections. Boulder computer Maven
  Most Microsoft Valuable Professional

• Error: "your computer is offline, please enter the last password used on this computer ' while trying to connect to Win8 PC using MS Account.

  Original title: necessary emergency assistance, cannot log on to pc, password not recognized

  Last week, I bought a brand new model of laptop Asus K55A.  All had been working fine without any problems, but when I tried to connect today (after previously working well earlier today a stop and then restart a few hours later) I could not signed.  The message I get is: "your computer is offline, please enter the last password used on this computer" OR "that password is incorrect.  Make sure that you use the password to your account Microsoft "and then gives the address to visit to reset the password as an option.

  I am now on a different pc and (after literally hours of trial and error messages on the site of Microsoft live!) have managed to reset my password - obviously successful because I used it to connect to this form.  However, when I restart and try to connect to my own laptop, I just get the same thing.  It is not to recognize the new password!  As I am the ONLY user on my laptop has no way for me to go at all!  Help, please.  Without him recognize the new password, my new laptop is completely useless!

  NB: I'm not too so there are a limited number of questions technical I can answer, however the above should give you the gist of the question, if all goes well computer savvy.  Windows 8 is the operating system in question, btw.

  "PROBLEM SOLVED-"your PC is disconnected"Message in Windows 8.
  Here's how I fixed my Asus laptop, but works the same on all the others, I'm sure. Easy instructions are here:
  www.nextofwindows.com/How-to-deal-with-your-PC-is-Offline-message-in-Windows-8/
  I went to the Business Center at the apt community I live in, pulled the decision-making network of one of their boxes and plugged my laptop, efficiently connect to their internet. I did not stop their computer, I just it out and put it in my laptop. Then I logged on my laptop with my hotmail account. It was all she wanted. I was in!
  I disconnected and close my laptop. And reconnect their their pc network cable.
  I pulled my laptop to make sure, it was fixed, and it is. Awsome. We had to plug into a network with a network cable, taking care of her.
  You have no idea how long it took me to find this simple answer. Their positions are everywhere and people are being told to wipe their readers or buy a piece of a $30 software.

• Connection to remote desktop using proxy and gateway desktop remotely?

  I have setup a gateway desktop remotely using Windows Server R2 2012 server. I use Remote Desktop gateway as an intermediary between to offer remote desktop session more than 443 because 3389 is blocked in several places of the customer.

  However, I encountered a problem with a customer that the network seems to use a web proxy.

  Is is possible to set up remote desktop to connect via web proxy? If so, how? If this is not the case, does anyone have any suggestions on how to provide a remote desktop session through 443 on proxy for situations where you don't control the client PC or network? RemoteApps allows access through the web proxy when you use Remote Desktop gateway?

  The error message is below to:

  Your computer cannot connect to the remote computer because the web proxy server requires authentication. To allow traffic not authenticated to a desktop gateway server remotely through your web proxy server, contact your network administrator.

  Thanks for any help!

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps.

• Error 720 Error Message trying to connect switched to Internet using windows 8 pro

  There is no error in the configuration of the modem in Device Manager.  Modem diagnostics checks ok. Conexant D850 56 K V.90 DFVc is the modem.

  Hi Fletchr,

  I suggest you try the steps from the following link:

  Wireless and wired network problems
  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps!

• Whenever I connect to my HDTV using vga, I get a BSOD, even tried with different pc tv/cable

  Hello

  Thank you for taking the time to read this! Yesterday that I tried to connect to an HDTV using VGA instead of someone else, worked well. Buy a vga cable today and connected to my 1080 p full hd Phillips and got a BSOD almost instantly. I tried some things and managed to do the work! Played skyrim for a little and left the laptop in sleep mode. Came, open upward and the screen stayed black, nothing I could do to get a Visual.
  Now, whenever I connect the cable I get a BSOD, it works with any other laptop, excludes the cable and television.
  I have updated all drivers in the list, checked my drive for errors using the good chkdsk, smart status on the disk is good, all withdrew. I know for a fact that my laptop works fine with extra monitors, we use all the time on my internship and as stated, it worked yesterday on another TV.
  Features of the laptop:

  ASUS n73jn

  processor Intel i5 460 m
  NVIDIA geforce 335 m
  Windows 7 64 bit
  4 GB ddr3 RAM
  the HDMI port is dysfunctional, just a few flickering screens filled with black lines, that's why I try vga. My guess is the hdmi port is DOA, but did not have a hd tv up to 2 years after purchase.
  
  News of the capture of blue screen:
  ==================================================

  Dump file: 093012-44382 - 01.dmp

  Crash time: 30/09/2012-18:57:22

  Bug Check String: SYSTEM_SERVICE_EXCEPTION

  Bug check code: 0x0000003b

  Parameter 1: 00000000' c0000005

  Parameter 2: fffff880'074259 cd

  Parameter 3: fffff880'029f90a0

  Parameter 4: 00000000'00000000

  Caused by the driver: igdkmd64.sys

  Caused by the address: igdkmd64.sys + 1e29cd

  Description of the file:

  Product name:

  Company:

  Version of the file:

  CPU: x 64

  Plant address: ntoskrnl.exe + 7f1c0

  Stack address 1:

  The stack address 2:

  Address 3 the battery:

  Computer name:

  Full path: C:\Windows\Minidump\093012-44382-01.dmp

  Number of processors: 4

  Main version: 15

  Minor Version: 7601

  The dump file size: 262,144

  ==================================================
  Thanks for your time!
  
  Greetings,

  Joachim

  Sorry, I was a little confused with the HDMI and VGA - continues to be the same advice.

  Looks like you have isolated to a hardware problem.  With the Intel graphics card is not posted, I have to wonder if the hardware problem is with the graphics card Intel

  FWIW - we have seen a number of overheating problems with the graphics from nVidia on your model.  Make sure the laptop is on a hard surface - and I would also use a filling of cooling (if possible) to ensure that the system is not overheating.

  Install a new copy of Intel video drivers is probably the most important thing to do now - and ensure that this card appears in Device Manager (and check in the nVidia PhysX tab to see if it appears here - even though I'm not familiar with this program).

  Try the video stress tests here: http://www.carrona.org/addldiag.html
  They can show that there is a hardware problem - but a lot of this will involve what video card works at the time of the test (even once, I don't have a lot of experience to make systems to change video card).

  Good luck!

• A little sleepy Internet - cannot connect to Skype by using my Microsoft account

  Hello

  Since this morning, when trying to connect to Skype by using my Microsoft account, I got a message that the Internet is a little sleepy and I have to try again later. It's using the desktop on Windows 8.1 version. However, I can use my Skype ID and I am able to use the account of MS on Skype on Android. I could also open a session using the Win 8 application using my account, Ms.

  I tried the option to completely uninstall Skype (including enforcement Win 8) as suggested elsewhere on the forums of discussion, but the problem persists.

  It's incredibly frustrating!

  Please give me an alternative or tips on how to get rid of this problem.

  Thank you

  I discovered the problem. For one reason or another in my LAN in Internet Explorer settings, I had ' configuration script automatically use "checked with a value for the script. Have no idea how it got there, but he stopped at IE to connect to the internet, but also this problem with Skype. I almost never use IE, I tend to use Firefox or Chrome.

  A little worrying that it unknowingly.

• Problems of peripheral connection to the Desktop Manager and Apploader.exe blackBerry Smartphones

  Just got a new BB8900 last Friday. On Monday, I met a Reload software: 552 error code and after checking online forums for options on how to fix I finally had to reinstall the operating system and reinstall the new applications, which are not checked by the resettlement process. Because I was afraid to become again this error when I rebooted the machine, I immediately made backups every hour I was reconfigure the device and adding my apps.

  Today I was going to do another backup for good measure, and once I have connected my Blackberry to the computer with Desktop Manager running, Desktop Manager crashed and gave me the following error message:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: DesktopMgr.exe
  Application version: 5.0.0.11
  Application timestamp: 4a4bd539
  Fault Module name: DesktopMgr.exe
  Fault Module Version: 5.0.0.11
  Timestamp of Module error: 4a4bd539
  Exception code: c0000005
  Exception offset: 000d68f5
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: c4a7
  More information 2: 473b2e845affd1758ca8e66121386d63
  3 more information: 83e8
  Additional information 4: 72466a8a5092651f7fe609f9ec3f3489

  I then tried the APPLOADER. EXE program location in program files/common files/research in motion/apploader. I had used this program yesterday to try to remove applications 1 by 1 with the hope that a single request was causing the error 552. Now for some reason any program as a problem to note the following in the error log file:

  Read 1010fffc location caused an access violation.

  I've looked through several forums and have not found a solution. What I can tell you is the following:

  (1) the phone works well, but I'm afraid by restarting the phone and another 552 error (there were two deleted apps that will be entirely deleted on reboot). Hope everything is fine but I got two of these 552 errors within 24 and the second came without any warning. If I get this error there is no way to make my backup since I can't connect to DM without it crashing.

  (2) it doesn't seem to be a timing issue, but I deleted the Intellisync folder anyway and it does not solve the problem.

  (3) have rebooted my machine without change to the problem.

  (4) have reinstalled DM Version 5 (this time without Roxio Media software) without change to the problem.

  (5) because now I get an error when connecting to DM and trying to run apploader.exe, there seems to be a setting on my phone which may cause problems (I don't know what it can be, but the APPLOADER program finds a violation of place then maybe the Blackberry software is confused about where to find my Apps?)

  (6) the BlackBerry Device Manager works fine and takes note of my device and the serial number it is necessary.

  After my last backup yesterday I probably only installed 3-4 other apps that I had lost and organized/moved files on the phone. So get this problem if shortly after that everything worked fine is staggering.

  Another update: it seemed to me I found the problem.  While RIM support recommended I do a reset, I pushed the rest of the phone feature seems to work very well.  I opted to start removing the one phone applications and then try to connect to the Desktop Manager.

  Once I removed the ZDNet Tech News For the IT professional and rebooted the phone, I was able to connect and make a backup. I'm sure this app works very well for almost everyone, but for some reason (maybe it is in conflict with another application on my phone), Desktop Manager does not do that and close. Initially, I reinstalled again and was able to make a new backup but an hour later Desktop Manager stops again (perhaps by doing an update on the news it creates a conflict with the Desktop Manager).

  Indeed summary of learning since my problem seems to be quite uniqueCurve 8900)

  (1) if the Director of bureau stops and you have tried other solutions on the forums such as deleting the folder Intellisync and reinstalling Desktop Manager, try to remove applications 1 by 1 and restart the phone before trying to connect again to Desktop Manager.

  (2) If you have had this problem, frequently make backups and keep track of what you add to your phone in case there is a problem you know the latest apps to remove (in my case, I couldn't go to my last backup since DM would be closed with the conflict of the app).

  (3) only consider a wipe of the device if you have exhausted your apps withdrawal tests.  Apps that came on your phone which notes the seller in the section about the application that RIM should be good.  Also while on AppWorld apps are offered by BlackBerry, there is no certainty that they will work on your phone.

• Why is - 17.151.38.201 trying to connect to my mail server?

  I use 5.1.5 server in my OS X server, and I have the Mail service is enabled. In my logs, I see several messages like:

  POP3-connection: Info: disconnected (no authentication in 0 seconds attempts): user = <>, = 17.151.38.201 rip, lip = xx.xx.xx.xx

  or

  IMAP-connection: Info: disconnected (disconnected to auth was ready, whereas dry 0): user = <>, = 17.151.38.201 rip, lip = xx.xx.xx.xx

  where xx.xx.xx.xx is the IP address of my mail server.

  Why that IP (which is an Apple IP address) trying to connect to my server using IMAP or POP3?

  As you the indicated this address and in fact the entire block 17.x.x.x is all owned by Apple of the IP addresses. Other than Apple's Push Notification traffic which is not the most common cause of traffic incoming , i.e. traffic from Apple and go to your network is the "Accessibility" of Apple test traffic.

  I would say that in this case it seems that it is indeed Apple do a test of the "accessibility" for your server.

  See http://mac.lytics.eu/?p=160

• I tried to connect by Satellite to TV VGA and S-video help

  Hello

  I have Toshiba Satellite and I am trying to connect with the TV using S-video and VGA but not off them worked. It s deflected on television at the start of the laptop but not showing TV out on laptop when you press FN + F5 to switch. Coming to the settings display, attached box 2 after withdrawal of box 2 settings.
  Can you please help me?

  Thank you.
  Vinod

  Hello

  What laptop do you have exactly and how connect you to the TV?
  Did you use a VGA adapter S-video?
  If I understand the laptop supports only VGA and s-video TV port only.
  Is this good?

• Satellite Pro A40 can't connect to the WLan using the Win XP

  Hi all

  Newbie on your site so thank you in advance for your answers ;-)

  Picked up a Toshiba Satellite Pro A40, completely formatted and installed a legal XP Pro.

  Trying to connect to the internet using a Netgear wg511 card works on my other laptop, it will not connect even though I installed the driver for it?

  It comes up with 'limited or no connectivity problem occurred because the network has not assigned a network address of the computer.

  Any ideas please?

  Thanks Mike

  Hello

  First of all, you must update the WLan driver.
  I put t know what wireless network card has been installed, but you can find WLan card details in Device Manager-> network adapters.

  In addition, I recommend to disable all the security settings on the router and then try to connect to the wireless network.
  If you will be able to connect to the Wlan, you can enable security settings (Wlan encryption, mac address filtering, firewall, etc.) again.

  Last but not least, you can try to use this command in a DOS (CMD)
  Ipconfig / renew

  Big names

• Apple Remote Desktop tries to connect to some weird areas

  Firefox and osx elcapitan 10.11.4 15E65

  It's so weird that lately my ARD tried to connect to areas randomly I searched on the web. Little Snitch reports she's trying to connect to 'gist.github' and the other day he tried to goto "krampus".  As I said it's strange behavior since it's the kind of thing I entered in google.

  All advice is appreciated.

  I would be a little surprised if Apple Remote Desktop (ARD) have been connecting the specified web sites, you can post what Little Snitch reports as the source and the destination of the connection?  Also please post what version of Apple Remote Desktop (ARD) are you using?   3.8 (A 380, 95) is in course, at last I checked.

  My general recommendation is to remove Little Snitch - this is a great tool, but it also tends to cause problems when network connections are blocked by mistake, and it's certainly excellent fodder for causing paranoia.

  Adware and malware can cause this, but - if you connect to these sites and don't have adware or malware or any sort of anti-virus or anti-malware, or other similar types of tools tools additional loading - I guess it's OS X hides a tile or such.

  Here is a previous related discussion - even if it is not of the ARD.

• When a second (another) user tries to connect using the connection to distance that a message "select a user to disconnect so you can connect.

  Original title: Remote Desktop

  We have Windows Server 2012 essentials (evaluation version) installed and working.  When connecting to even via the remote desktop connection it works fine, but when a second (another) user tries to connect using the connection to remote, a message "select a user to disconnect so you can connect.  The names of the 2 users are displayed the first is the name of the administrator of the local server and the second is the remote desktop user who was first.  We need at least 3 to 4 remote desktop both users to be connected.  Please advice

  Hi BHARATISRANI,

  Thanks for posting in the Microsoft Community.

  Since you are using Windows Server 2012 Essentials, the question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

  Windows Server 2012 Essentials General TechNet Forums

• You want to connect to Xbox Live 360 using labtop. Cannot use WMI. Windows says THAT WMI is damaged, use the system restore. System Restore will not restore to any point I use.

  I tried to connect to Xbox Live on my Xbox 360 to internet using Wi - Fi to my labtop. I want to enable sharing on this topic in the Advanced tab, but I get the message that says WMI is damaged and I need to use the system restore. However, the system restore will not restore the system at any time I choose. What is the solution?

  OK you have an ETHERNET cable? (cable for PC to the Modem)
  What OS do you have?

  Heres to help, you need to an ethernet cable, or adapter wireless XBOX 360.

  With the ethernet cable, connect one end on the XBOX and one end to your laptop.
  You go to control panel > network and Internet > network and sharing Center > change the adapter settings. Then you select your wireless network and your local network. Then you right click and press 'CONNECTION of BRIDGE' (requires administrator privileges). After that your DONE! Just check if it works on your XBOX 360!