TSSTcorp CD/DVGW TS-L532M

Similar Questions

• My tsstcorp cd/DVGW-ts-l632 ceased to be able to write cd/dvd, after microsoft's analysis said no combustion available with this drive.__Can help you? __Stopped a few months of work.

  TSSTcorp cd/DVGW-ts-l632

  Replace the drive. It is common to do so. MS - MVP - Elephant Boy computers - don't panic!

• error code 19; TSSTcorp CD/DVGW TS-H652M ATA Device will not load at startup upward due to incomplete or registry problem? What can I do from here now, Windows VISTA-32 bit; gives this code problem also 00000013, thanks for your time.

  error - coded 19; involved device is CD/DVGW - TSST Corp. CD/DVGW TS-H652M ATA DEVICE. does not load at startup, nor do I have an icon E:\drive on my related 'Computer', only C and D of backup disks, since it has failed to load.  E is my player device on the windows vista operating system to 32-bit.  I tried the driver down load and FIXIT online program, they say that my drivers are repairable, but the problem is in the registry and device instructions at the beginning upward. What should I do next!

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Normally the above will solve this problem otherwise working your way down through them, even if you did
  them before.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• The moderator last night found my problem of tracking both ed keys are corrupt. I lost the contact before I had the names of the two keys. My TSSTcorp cd/DVGW ts 552D is not recognized by windows XP. What are the two keys, please?

  No changes have been made to my computer.  The cd player is sometimes recognized by windows XP maybe once a month.  It is not playing audio files or music CD or movie videos either.

  I'll give you a link to an automatic fix for these two registry keys, but it really sounds like the optical drive is a failure. Replace an optical drive, it is very cheap and very easy to do.

  http://www.aumha.org/regfiles.htm - for MS - MVP cdgone - Elephant Boy computers - Don ' t Panic!

• Code 10 made his first appearance for my tsstcorp cd/DVGW-ts-l632d ata device

  cannot burn discs on my laptop

  Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• CD/DVD drive is not detected (Windows Vista). Error message: Please insert a disk (removable disk): __Our device driver is: TSSTcorp CD/DVGW TS-H653L ATA Device.

  Was not aware there is a problem until I tried some recently audio and data CDs.  Have you tried different Web sites to help you, however some of the directions come with a warning that by following certain procedures I can create other problems.  The FixIt tool was not able to install the player.

  Hello

  Please ALL these even if you've done it before as it's often the total process that
  solves the problem. You should also check with the system manufacturer as some readers do not use windows
  by default the drivers and need their own, use the bottom and if no joy check on the site of the manufacturer of the system.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Problem with TSSTcorp TS-L632D TO04 CD/DVGW stoped burning CD and DVD

  Hello world! The problem is basically just, he doesn't want to write/burn any cd/dvd brand more. He works wonders for little over a year and recently developed this problem. I'm sure that's not media brands I've tried with several. The problem with Nero, Alcohol120%, MagicISO, PowerISO, Burn4Free, regardless of what I am trying to burn data, audio, regular programs or images. Note that I am able to write with alcohol with success but there is in fact nothing on the CD and Nero burns the data also but fails to verify after the fact and gives an error. Writing on DVD R/RW is completely failed, creating coasters. Also the Player opens without reason and when he wants. I have laptop Toshiba A200 - 1 MB under original Vista Home Premium. Here's an error report, hopefully it'll help. Thanks and any assistance is much appreciated!

  Windows Vista 6.0
  IA32
  WinAspi: -.

  NT-SPTI used
  Nero Version: 9.2.6.100
  Internal Version: 9, 2, 6, 100
  (Nero Express)
  Recorder: Version: TO04 - HA 1 YOUR 0 - 9.2.6.100
  Adapter driver: HA 1
  Drive buffer: 2048kB
  Bus type: Via inquiry data
  CD-ROM: Version: TO04 - HA 1 YOUR 0 - 9.2.6.100
  Adapter driver: HA 1

  = Scsi-device-map =.

  = CDRom-Device-map =.
  TSSTcorp CD/DVGW TS-L632D E: CdRom0
  =======================

  AutoRun: 1
  Excluded drive IDs:
  WriteBufferSize: 83886080 (0) bytes
  BUFE: 0
  Physical memory: 2037 MB (2086276 KB)
  Free physical memory: 864 MB (885052kB)
  Memory used: 57%
  QUERIES PFiles: 0x0
  Global Bus type: default (0)
  Control supported media: disabled (0)

  13.10.2009
  CD-ROM (ISO)
  02:27 A. Â? ? Â? #1 text 0 file SCSIPTICommands.cpp, line 452
  LockMCN - completed successfully for IOCTL_STORAGE_MCN_CONTROL

  02:27 A. Â? ? Â? #2 text 0 file Isodoc.cpp, line 6940
  ISO document burn settings
  ------------------------------------------
  Determine maximum speed: TRUE
  Simulate: FALSE
  Write: TRUE
  Finalize the CD: FAKE
  Multisession: TRUE
  Multisession type: Start multisession
  Burning mode: TAO
  Mode : 1
  ISO level: 1 (Max. of 11 = 8 + 3 char)
  Character set: ISO 9660
  Joliet: TRUE
  Allow pathdepth more than 8 directories: TRUE
  Allow more than 255 characters in path: TRUE
  Write ISO9660; 1 file extensions: TRUE

  02:27 A. Â? ? Â? #3 text 0 file Burncd.cpp, line 3257
  TSSTcorp TS-L632D CD/DVGW
  Super link activated

  02:27 A. Â? ? Â? #4 ISO9660GEN-11 file Geniso.cpp, line 3349
  First address writeable = 0 (0x00000000)

  02:27 A. Â? ? Â? #5 text 0 file ThreadedTransferInterface.cpp, line 1017
  Removed 2 blocks from end of track 0. Length: 2885-> 2883.

  02:27 A. Â? ? Â? #6 text 0 file Burncd.cpp, line 3587
  Turn on Track-At-Once, using CD-R/RW media

  02:27 A. Â? ? Â? #7 text 0 file ThreadedTransferInterface.cpp, line 1017
  Removed 2 blocks from end of track 1. Length: 2885-> 2883.

  02:27 A. Â? ? Â? #8 text 0 file ThreadedTransferInterface.cpp, line 1017
  Removed 2 blocks from end of track 1. Length: 2885-> 2883.

  02:27 A. Â? ? Â? #9 text 0 File DlgWaitCD.cpp, line 294
  Media in the drive type: unknown
  Write speed more up/down CLV: 3 x / 1219560 x
  Recorder min/max supported write speed: 4 x / 9226724 x

  02:27 A. Â? ? Â? #10 text 0 File DlgWaitCD.cpp, line 313
  Last possible write address on media: 359846
  Last address to be written: 2884

  02:27 A. Â? ? Â? #11 text 0 File DlgWaitCD.cpp, line 325
  Write in overburning mode: No. (enabled: CD)

  02:27 A. Â? ? Â? #12 text 0 File DlgWaitCD.cpp, line 2882
  Recorder: TSSTcorp TS-L632D CD/DVGW;
  Code CD - RW: 00 97 10 00; CD manufacturer unknown
  ATIP data:
  Special Info [hex] 1: D1 00 C6, 2: 61 a 0, 00 (LI 97:10.00), 3: 4F 3 b 4 a (LO 79:59.74)
  Additional info [hex] 01:02 4A B0, 2:5 C6 26, 03:00 80 80 (invalid)

  02:27 A. Â? ? Â? #13 text 0 File DlgWaitCD.cpp, line 500
  > Protocol of DlgWaitCD activities:
  =========================================

  02:27 A. Â? ? Â? #14 text 0 file ThreadedTransferInterface.cpp, line 744
  CIS (after recorder preparation)
  0: TRM_DATA_MODE1)
  2 indices, index0 (150) not provided
  #0 + 2885 (2885) original disc POS = 2885 # / 0:38.35
  relocatable, pos to drive for the cache-write implementation not required / required
  -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2883 blocks [E: TSSTcorp CD/DVGW TS-L632D]
  --------------------------------------------------------------

  02:27 A. Â? ? Â? #15 text 0 file ThreadedTransferInterface.cpp, line 946
  Prepare [E: TSSTcorp CD/DVGW TS-L632D] for write in TAO
  DAO infos:
  ==========
  MCN:
  TOCType: 0x00; Closed disc, session not obsessed
  Titles 1 to 1: Idx 0 Idx 1 next Trk
  1: TRM_DATA_MODE1, 2048/0 x 00, FilePos 0 307200 6215680, ISRC ""
  Introduction DAO:
  ===========
  ___Start_ | ___Track_ | _Idx_ | _CtrlAdr_ | ___Size_ | ___NWA_ _ | _RecDep___
  -150 | Lead-in | 0 | 0x41. 0 | 0 | 0x00
  -150 | 1. 0 | 0x41. 0 | 0 | 0x00
  0 | 1. 1. 0x41. 2885 | 0 | 0x00
  2885 | Lead-out | 1. 0x41. 0 | 0 | 0x00

  02:27 A. Â? ? Â? #16 text 0 file ThreadedTransferInterface.cpp, line 1017
  Removed 2 blocks from end of track 1. Length: 2885-> 2883.

  02:27 A. Â? ? Â? #17 text 0 file SCSIPTICommands.cpp, line 242
  SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

  02:27 A. Â? ? Â? #18 text 0 file Burncd.cpp, line 4320
  Caching options: cache CDRom or network-Yes, small files-no)<>

  02:27 A. Â? ? Â? #19 phase 24 file dlgbrnst.cpp, line 1767
  Caching of files started

  02:27 A. Â? ? Â? #20 text 0 file Burncd.cpp, line 4442
  Cache writing successful.

  02:27 A. Â? ? Â? #21 phase 25 file dlgbrnst.cpp, line 1767
  Caching of files completed

  02:27 A. Â? ? Â? #22 phase 28 file dlgbrnst.cpp, line 1767
  Speed measurement started

  02:27 A. Â? ? Â? #23 text 0 file ThreadedTransferInterface.cpp, line 2676
  Check position of the point disk 0 (relocatable, disc pos, no patch, orig to #0 info): write to #0

  02:27 A. Â? ? Â? #24 text 0 File ThreadedTransfer.cpp, Line 273
  Size of the memory pipe 590400

  02:27 A. Â? ? Â? #25 phase 29 file dlgbrnst.cpp, line 1716
  Speed measurement completed: 307.7 x (46? Â? ? Â * 160 KB/s)

  02:27 A. Â? ? Â? #26 phase 36 file dlgbrnst.cpp, line 1767
  Burn process started at 4 x (600 KB/s)

  02:27 A. Â? ? Â? #27 text 0 file ThreadedTransferInterface.cpp, line 2676
  Check position of the point disk 0 (relocatable, disc pos, no patch, orig to #0 info): write to #0

  02:27 A. Â? ? Â? #28 text 0 file MMC.cpp, line 21875
  Set BUFE: Super link-> ON

  02:27 A. Â? ? Â? #29 text 0 File ThreadedTransfer.cpp, Line 273
  Size of the memory pipe 83836800

  02:27 A. Â? ? Â? #30 text 0 file MMC.cpp, line 17311
  Start narrow-gauge #2

  02:28 A. Â? ? Â? #31 text 0 file DVDPlusDualLayer.cpp, line 1424
  SetDriveCaps: Set LAST LBA of layer 1 to 0

  02:28 A. Â? ? Â? #32 phase 37 file dlgbrnst.cpp, line 1767
  Burn process completed successfully at 4 x (600 KB/s)

  02:28 A. Â? ? Â? #33 phase 78 file dlgbrnst.cpp, line 1767
  Data verification started

  02:28 A. Â? ? Â? #34 text 0 file ThreadedTransferInterface.cpp, line 1017
  Removed 2 blocks from end of track 1. Length: 2885-> 2883.

  02:28 A. Â? ? Â? #35 text 0 File ThreadedTransfer.cpp, Line 273
  Size of the memory pipe 590400

  02:28 A. Â? ? Â? #36 SPTI-1064 file SCSIPassThrough.cpp, line 215
  CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1064)
  CDB data: 0 x 28 00 00 00 00 00 00 00 01 00 00 00
  Key: 0x05 (KEY_ILLEGAL_REQUEST)
  Printing Code: 0x21
  Meaning of Qual: 0x00
  Sense area: 0 x 70 00 05 00 00 00 00 0 to 00 00 00 00 21
  Buffer x0a5a6500: Len x 800

  .................................................. .................................................. ............
  .................................................. .................................................. ............

  02:28 A. Â? ? Â? #279 SectorVerify 20 file Cdrdrv.cpp, line 11185
  Sector 0 to 1055 read errors

  02:28 A. Â? ? Â? #280 CDR-1222 file Writer.cpp, line 203
  Checking abandoned, too many errors
  E: TSSTcorp TS-L632D CD/DVGW

  02:28 A. Â? ? Â? #281 phase 81 file dlgbrnst.cpp, line 1767
  Data verification failed

  02:28 A. Â? ? Â? #282 text 0 file SCSIPTICommands.cpp, line 289
  SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

  02:28 A. Â? ? Â? #283 text 0 file Cdrdrv.cpp, line 11243
  DriveLocker: UnLockVolume completed

  02:28 A. Â? ? Â? #284 text 0 file SCSIPTICommands.cpp, line 452
  UnLockMCN - completed successfully for IOCTL_STORAGE_MCN_CONTROL

  Existing drivers:

  Registry keys:
  HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon

  Post edited by: velkoto

  Post edited by: velkoto

  Try to remove the CD/DVD filters in the registry.
  When the associated CD/DVD (such as iTunes, Nero, virtual CD software), the software is installed, they install filters in the registry, which can cause compatibility problems.

  (1) run Regedit (start-> Run-> Regedit)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  If your CD/DVD programs stop working, you will need to reinstall them (preferably with an updated version).

  This utility can remove the filters for you:
  http://www.CSD.Toshiba.com/content/support/bulletins/su2065061/RmvFltrs.exe

  Also remove the dust on the lens with a clean Microfiber cloth.

• Satellite L655-12 q - CD/DVD-rom can't burn CDs

  Hello

  I use a Satellite L655-12 q, model number short PSK1EE.
  It has a tsstcorp CD/DVGW, type ts-L633c. My rom reads and burns DVDs fine, but can not read or burn CDs, especially when the size of the files involved is small.

  Can someone please help?
  Thnx.

  On this virtual path, it is not easy to say what is wrong, but if there is problem with playback too, it may be a malfunction of the equipment. Perhaps more calibration doesn t the goal and objective cannot be placed in the right position to read/write CD.

  Warranty is still valid?

• Satellite A - will not burn CDs

  Hi guys,.

  My tsst ts-l632 drive does not burn. I tried different ways to burn CDs. Nero, imgburn, itunes, windows media player. They all get the same results: software says burning was a success but the check fails. When I eject the blank and pop back in windows Explorer says it's still a blank CD.

  All with the same batch of bullies. On my notebook of Peacock roommates same whites work like a charm. Also I use this brand of CD for years. My sister told me she had the same problem with its Satellite P100 and the same brand of CD.

  I wrote an e-mail the cd manufacturer and they said I could update the firmware of my drive, but I can't find anywhere.

  The data on my drive:
  TSSTcorp cd/DVGW-TS-L632DT004
  version: t004
  code OEM: tf

  Hey,.

  What brand of CD that you use, and it works with the DVD?
  I doubt that this firmware update can fix this

  You should test with mediums of high quality like Verbatim or TDK discs. I've used both brands and they still function perfectly.
  Check this box!

  In addition, take a look in the Device Manager. Your drive is listed with a yellow exclamation point?

• What are the games are running on the Satellite A200-1GH

  In fact, I want to know * what games * _exactly_ now run on your laptop with the following config:
  -----
  + Satellite A200-1GH (PSAECE) +.
  Mobile DualCore Intel Core Duo T2450 2000 MHz
  2 GB of SDRAM DDR-2667 Kingston
  Chipset - Mobile Intel Calistoga-PM i945PM
  NVIDIA GeForce Go 7300 (256 MB) VGA BIOS Version 5.72.22.54.21
  Sound - Realtek ALC862 @ Intel 82801GBM ICH7-M - High Definition Audio Controller
  HARD drive - TOSHIBA MK1237GSX ATA Device (120 GB, 5400 RPM, SATA-II)
  Optical - TSSTcorp CD/DVGW TS-L632D ATA Device
  Network - Realtek RTL8101 Family PCI - E Fast Ethernet NIC (NDIS 6.0)
  DirectX 10.0
  DirectDraw - 7.15.11.5616 - nVIDIA ForceWare 156.16
  -----

  I really wonder about your question.
  Do you know how many PC games exist on this wonderful and beautiful world?

  So maybe this might help you.
  Check the details of the game! For most every game developer publishes the hardware configuration requirements for each game.

  Then compare it with the specifications of your laptop and then you have it ;)

• Need help get the dvd to play

  Can a cd & dvd play on my D: drive?  If Yes, what should I do to make this happed? Currently, both D & E: drives say cd: drive.no mention of dvd player.

  Maybe you don't have a DVD player?

  First, launch Device Manager... Reach... Start/run and
  type or copy / paste devmgmt.msc and press ENTER.

  In the... Device Manager expand the section that says: CD-ROM/DVD-ROM drives.

  Names and models of your optical drives should be visible.

  If one of the disks is compatible DVD... it will say... DVD.

  Examples:

  TSSTcorp CD/DVGW TS-H552B (read and write CD and DVD)
  DVD - ROM TSSTcorp TS-H352A (read CDs and DVDs)

  Another thought... If your goal is to play commercial DVD movies...
  Windows XP does not natively recognize commercial DVD-video...
  It requires a DVD decoder. And you must have a DVD drive.

  If you could play before commercial video DVD... make one
  Restoration of the system for a while before it started can be your solution.

  Or you could buy a DVD decoder at the following link:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Info about DVD decoders:
  Plug-ins for Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  Or you can download and use one of the following freeware
  media players:

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

  Media Player Classic Home Cinema
  http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
  (works on XP/Vista/7)

  Or... you can try to download and install one of the
  Following codec packs.

  (FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates).

  * Proceed at your own risk *.

  (1) K-Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/
  (Windows 2000 / XP / 2003 / Vista / Windows7 / XP64 / Vista64 / Windows7 64)

  (2) information on CCCP (combined Community Codec Pack)
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page
  (XP SP1 or more, Vista, Windows 7 - 32 bit - 64 bit)

  (3) Windows 7 Codec Pack
  http://download.CNET.com/Windows-7-Codec-Pack/3000-13632_4-10965840.html
  (2000/XP/2003/Vista/Server 2008 / 7)

  (4) Media Player Codec Pack
  http://www.mediaplayercodecpack.com/
  (Windows XP - Vista - 7)

  Good luck...

• DVD player does not read DVD discs, or does it only intermittently.

  Toshiba Satellite A135 laptop.

  w/Vista Home Premium;

  has a drive TSSTcorp CD/DVGW TS-L63D DVD/CD-RW.

  Hello

  You really need this post in the Forum of Driver and Vista Hardware. A moderator will move
  There are.

  Answers - Vista - Hardware - Forums
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  ================================================

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  A CD/DVD cleaner might help.

  ------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• what code 39 meand on windows vista Device Manager?

  my Player DVD/CD-ROM drives TSSTcorp CD/DVGW TS-H652D ATA device says windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (code 39). What it means and I'll be able to repair this problem?

  Hello

  In general, error code 39 can be caused by a missing required device driver, a required binary file is damaged, if there is a problem with the
  process of I/O to the file, or if a driver that refers to an entry point in another binary file which cannot not load.

  Step to solve the problem:

  Step 1: Run Fixit diagnostic tool from the link below and check if this solves the problem.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Step 2: Run tool Fixit of this article:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs:
  http://support.Microsoft.com/kb/982116

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Now, I get this error.

  I 22:50:04 ImgBurn Version 2.5.0.0 started!
  I 22:50:04 Microsoft Windows XP Home Edition (5.1, Build 2600: Service Pack 3)
  I 22:50:04 physical memory total: 457 200 KB - available: 32 688 KB
  W 22:50:04 drive D:\ (FAT32) does not support files > 4 GB in size.
  I 22:50:05 initializing SPTI...
  I 22:50:05 looking for SCSI / ATAPI devices...
  I found 22:50:09 1 tickets!
  I 23:01:26 operation started!
  I 23:01:26 Source file: C:\Documents and Settings\Compaq_Owner\Desktop\***.dvd
  I 23:01:26 Source file sectors: 3 697 696 (MODE1/2048)
  I 23:01:26 Source file size: 7,572,881,408 bytes
  I 23:01:26 Source file Volume identifier: XGD2DVD_NTSC
  I 23:01:26 Source file Volume Set Identifier: 34672923
  I 23:01:26 Source file application identifier: Sonic Scenarist 3.1
  I 23:01:26 file Source or file systems: ISO9660, UDF (1.02)
  I 23:01:26 device destination: [5:0:0] TSSTcorp CD/DVGW TS-H552L 0614 (e :)) (ATA))
  I 23:01:26 Destination Media Type: DVD + R DL (Disc ID: RITEK-S04-66) (speeds: 2.4 x)
  I 23:01:26 Destination media sectors: 4 173 824
  I 23:01:26 write Mode: DVD
  I 23:01:26 write Type: DAO
  I 23:01:26 write speed: 2, 4 x
  I 23:01:26 link size: Auto
  I 23:01:26 lock Volume: Yes
  I 23:01:26 Test Mode: No.
  I 23:01:26 OPC: No.
  I 23:01:26 BURN-Proof: enabled
  W 23:01:27 write speed Miscompare! -Wanted: 3 324 KB/s (2.4 x), got: 2 770 KB/s (2 x)
  I 23:01:27 Book Type setting: DVD-ROM
  I 23:01:27 L0 data Zone capacity specified by the user: 1 913 760
  I 23:02:33 set the successful area of L0 data capacity!
  I 23:02:34 filling buffer... (20 MB)
  I 23:02:38 writing LeadIn...
  I 23:02:51 writing Session 1 of 1... (1 track, LBA: 0 - 3697695)
  I 23:02:51 writing track 1 of 1... (MODE1/2048, LBA: 0 - 3697695)
  I 23:02:51 writing layer 0... (LBA: 0 - 1913759)
  I 23:22:06 writing layer 1... (LBA: 1913760-3697695)
  I 23:40:14 synchronous Cache...
  I 23:40:21 closing track...
  I 23:41:02 disc finalize...
  W 23:43:27 potential 'WaitImmediateIO' deferred Error - (94%, 0/3) - Session Fixation error writing opens
  W 23:43:27 finalise disc failed! -Reason: Session Fixation error writing opens
  W 23:43:27 retry (1 of 3)...
  W 23:46:11 potential 'WaitImmediateIO' deferred Error - (77%, 0/3) - Session Fixation error writing lead in
  W 23:46:11 retry failed - reason: Session Fixation error writing lead in
  W 23:46:11 retrying (2 of 3)...
  W 23:48:25 potential 'WaitImmediateIO' deferred Error - (0%, 0/3) - Session Fixation error writing lead in
  W 23:48:25 retry failed - reason: Session Fixation error writing lead in
  W 23:48:25 retrying (3 of 3)...
  W 23:50:07 potential 'WaitImmediateIO' deferred Error - (0%, 0/3) - Session Fixation error writing lead in
  W 23:50:07 retry failed - reason: Session Fixation error writing lead in
  W 23:50:20 (4) to try again...
  W 23:51:32 potential 'WaitImmediateIO' deferred Error - (0%, 0/3) - Session Fixation error writing lead in
  W 23:51:32 retry failed - reason: Session Fixation error writing lead in
  I 23:51:57 export a chart of the data...
  I 23:51:57 graph data file: C:\Documents and Compaq_Owner Data\ImgBurn\Graph Data Files\TSSTcorp_CD-DVDW_TS-H552L_0614_FEBRUARY-12-2010_11-01_PM_RITEK-S04-66_2.4x.ibg
  I 23:51:57 export successfully complete!
  I 23:51:57 operation successfully completed! -Duration: 00:50:28
  I 23:51:57 average write speed: 3 298 KB/s (2.4 x) - Maximum write rate: 3 439 KB/s (2.5 x)

  The captain.
  
  .
  Any help please

  Hello

  Maybe the damaged disk media? Might be errors of disc - the disc seems to work differently?

  Check with the support of Imgburn and Forums
  http://Forum.ImgBurn.com/

  Perhaps additional help here:

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• CD drive won't burn dvd or read burned dvd but will play store bought dvd

  TSSTcorp cd/DVGW-ts-h652m ata device, it's my player to cd for some reason, I can't burn cd/DVDs, but the reader will read these and play them, also it won't read burned DVDs, Noah he reformatted dvd, how can I solve this problem

  Hello

  Have you tried to close all programs and then insert the disc in the drive?

  You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
  Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  CD have a tolerance + - and you have to write on the side outside their tolerance. They can be given
  However, it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -----------------------------------------------------------------------

  Try this troubleshooting:

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.