Tungsten E2 - not recognizing SD card?

Similar Questions

• BlackBerry Smartphones BB Pearl not recognizing Media Card

  I have a Kingston 2 GB MicroSD card installed in my BB.  He works very well for the past month (since I have the phone) and has 4 or 5 images and 5 another 6 ringtones stored on it.  Earlier this week, I had been hanging the phone to the computer with the USB cable and it would ask me if I wanted to access the media.  I would say no and continue on from there.  Then Wednesday, all of a sudden the BB began to no longer recognize the card.  Today, I went into the settings and they are:

  Map of media Support - on

  Encryption mode - no

  Mass Storage Mode Support - on

  Auto enable mass storage Mode when connected - invites

  A memory card is not currently inserted in the device.

  I take the media card and plug in the computer and it is still showing all the files there.  When I plug the phone to the computer, it is not recognized by the computer.

  Any suggestions?

  I found something Spingineer here (http://supportforums.blackberry.com/rim/board/message?board.id=8100&thread.id=11781) and tried.   It worked like a charm.

• Series RS-232/485 isolated 2-port not recognized PCI card

  I have a series RS-232/485 isolated 2-port PCI on my computer. I installed the card, then the software but my computer never acknowledged that there is a card in the PCI slot.  Because this card is old, I also tried to install older versions of the software serial but it did not help.  I have a Windows 7 computer x32bit and other PCI cards have been installed into the same slot before this one, so I know the works of slot.  The map was built well before Windows 7 and I don't know if they are compatible.  I was wondering if there is no way to force the computer to recognize the hardware or if there is a way to check to see if the card still works.

  Thank you

  
  

• Card reader Y530 not recognizing SD card

  I have posted about this same problem in November and have not yet repaired. Original message:

  "

  My new y530 running Vista Home Premium can not read my SD card via the integrated 6-in-1 card reader. As far as I know, the Device Manager is only working for memory stick and xd.

  http://img.Photobucket.com/albums/V112/strokingdeaded/DMC.jpg

  I tried to install the latest drivers for SD and ThinkVantage updates but did not work. When I hold my card in, it does not appear as a removable storage device and nothing happens.

  And technical support does not support y530. »

  I read a post since then with someone having the same problem. I tried to do what he said, but it was rather vague and has ended up does not. I've since contacted support and could not get them to give me answer except "send in for repair. I prefer not to do that because I don't like to be without my computer, and if anyone could do it, why can not I? Someone at - it ideas?

  I finally got to work. What I did expect a system start let me access the SD drive. He did this once from time to time in unknown conditions. When I was able to access it, I wen to the Device Manager and removed the crib card drivers and reinstalled them. Each subsequent startup was the player available to use.

• Satellite A200 - 10 X not recognizing nVidia cards

  The laptop came with Vista home edition. I decided to upgrade to the Enterprise edition and all of the upgrade went well except for the disply drivers, which is in fact the most important issue for me and the reason why I bought this laptop in particular.
  I tried several drivers Toshiba Web site display, nVidia and a few independent, but they all failed to install that application installation claims pilot that there's no nVidia display adapter in my laptop.
  Excat message is "Installer NVIDIA did not all compatible with your current hardware drivers. The installation program will now stop. »

  Vista Home worked well with nVidia display, which is Go 7300, but now I'm stuck with the standard VGA on Vista Enterprise edition...
  I also upgraded the BIOS to ver 1.80 hoping he might make a diferrence, but no luck.
  I have been the net cruisng and googoling my life away for the last week trying to find a solution.
  Any help?

  I put t really see big differences between the edition of Vista family and business edition and I m 100% sure Vista home edition and Enterprise edition must be able to use the same graphics driver.
  The graphics driver who worked on the Home edition also works business Edition!

  I think that you have chosen just a bad or incompatible graphics driver.

  If you are sure that your graphics driver is a right please install the display driver from the Device Manager to 100%.
  Then choose the install from a list or a specific location called option, and you select don't search. I will choose the driver to install

  PS: Please also visit these sites driver Toshiba compatible graphics driver:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp
  http://209.167.114.38/support/TechSupport/ln_TechSupport.asp

  or 3 websites of third parties such as

  www.OmegaDrivers .net
  www.laptopvideo2go.com

• 4GB SD card not recognized

  Hello

  I ordered the Intex Cloud FX phone which is only available in India powered Firefox smartphone.
  I inserted a micro SD 8 GB card which works perfectly on other phones, but not on the Intex Cloud FX phone.

  The memory card is not recognized at all. Here are the specs:
  Phone:
  Brand - Intex
  FX Cloud - model
  Made in people's Republic of CHINA

  Memory card:
  Brand - SanDisk
  Capacity - 4GB
  Speed class - 2
  Another - large capacity (GC)

  Please suggest a solution.

  What file system is formatted SD card in?

• HP Elitebook 840 G1: SD card not recognized on Windows 8.1 (64 bit) of the HP Elitebook 840 G1 laptop

  Hello

  The SD card is not recognized by my laptop on Windows 8.1 (64-bit), even if it does not work on Ubuntu.

  I installed the driver from Alcor Micro chip card readerbut still nothing happen when I insert the sd card adapter.

  Is there another driver, that I should install?

  Thank you.

  Download another Realtek USB driver

• Portege R500 - Bluetooth PC card mouse not recognized

  I am trying to use a mouse with my R500 bluetooth PC card, but it is not recognized when I insert it in the PCMCIA slot.

  The light. I need to change any settings?

  Hello

  Usually, the PCMCIA card should be recognized directly after that it was inserted in the slot.
  There is no special driver for the PCMCIA. It s a BIOS according to the function.

  What you could do is to change the device configuration option in the BIOS.
  I think that it s on the second page in the BIOS.
  It s set configuration by OS. I recommend that you change this.

• Tecra 8000: PC Wireless Card is not recognized

  I am trying to conect my Tecra 8000 to my wireless router, but the card is not recognized when I plug it into the laptop, it is recognized in my satelite. I tried running windows 98 and 2000 now but its made no difference.

  Is there anything else I should do?

  Hello

  What wireless card did you use? Maybe the Tecra 8000 doesn t support this card.
  Check you manual user for the supported cards and compatible.

• Satellite P200-123 2 GB SD card is not recognized

  Hello

  When I put a 2 GB standard (* NOT * HCSD) SD card in the built-in player, it is not recognized, the sd card is not in the Device Manager, or anywhere.

  I updated the driver "SD Utilities" and I also tried updating Vista with a fix, but it says I already have a later version installed.

  However, the 1 GB SD cards work always in the drive?

  Any help would be much appreciated :D

  BTW, my OS is Vista 32 bit

  The 2 GB card works in other PC?

  Maybe its defective or needs formatting.

• Satellite L30-101 WLan card not recognized after installing XP

  Hey

  I just finished my Vista to XP downgrade L30-101 and installed all the drivers I found were those that I needed, but now it's not recognizing the wireless and I do not know how to fix this...

  The wireless icon is not in the Internet Connections folder or anywhere else, but I have already downloaded a modem one try it and a network card, a...

  He had an Atheros card on it too I think, I downloaded the driver for this as well...

  Hello!

  Do you have the yellow marks or unknown devices in Device Manager?

  In your case I'd do an update of the BIOS if you n t have the most recent version, and Yes, you have an Atheros WLAN card, so you need Atheros driver.

  Please check if the switch wireless on the laptop is on.

  Good bye

• SatPro A10 - wireless network card is not recognized

  I recently bought a wifi minipci card for my A10. After installing the card I have powerd up and the card was not recognized by windows, which is nothing to add material etc.
  I am running XP Home Edition with service pack 1, and I don't think that the machine is ready wireless.

  Salvation will be

  According to the specification of the A10 SP is WLAN ready. Did you find a WiFi (black and white) antenna cable near the card slot?

  Please check device manager if there is an unknown device, as well as the entries under network adapters.

• WiFi not recognized on Tecra A3 card

  Hello
  I have a laptop old enough, I think that on registration to this site he said the production date was end of 2005. It is a Tecra A3 series.
  I was wondering if someone could give me some tips for the inside wireless card.

  I tried to download the drivers for the wireless card that says that the Web from Toshiba site, but installing the driver just tells me plug-in card, when it is already.
  I took out the card and its reference number is: PA3362U 1MPC.
  Its not even come in windows XP Device Manager.

  EDIT: Sorry just a few details, it was working at one point. But I had to reformat, since reinstalling windows. I read that it is possible that "the map is not enabled", but it is not recognized in Device Manager?

  So far I have not conscientious, but I recently upgraded my wireless broadband connection and I would like to be able to use the wireless card.
  Anyone could offer me some tips on how to get it operational?

  Thanks for your time in reading.
  Andy.

  Hello

  If your wireless network card is properly inserted, then it should appear in the NICs as unknown device under Device Manager (if the driver has not been installed) or must be properly recognized as Intel PRO/Wireless 2200 b/G Wlan card.

  Yes, PA3362U 1MPC part number seems to belong to the * Intel PRO/Wireless 2200 b / G * Wlan card. I have goggled a bit and found some info that could confirm it.

  So, you should definitely use an Intel Wlan driver for this card to work.

  Concerning

• Used the update and now the video card is not recognized

  I updated updater manual update and have not updated anything since early December, 01/30/10 I installed the 5 important updates that were listed, I don't remember who they were, after installing the computer needed to restart and after the recovery, the video card is no longer recognized.  I get the BIOS beep code for no video card or bad video memory.  I know that this seems to be a hardware problem, but this computer worked fine until these updates. Now that the video card is not recognized, I can't even get into the BIOS, and still less actually starting windows. Any help/ideas what caused this and how can I fix this are greatly appreciated, thank you very much. Even a list of the latest important updates might be useful, I can't seem to find a list of anywhere.
   
  System-Vista Home Premium 64-bit
  Palit-card nVidia GeForce 9600 GT graphics card

  Oh and I took out that graphic card and put in a different one, nVidia PNY GeForce 7900 GS and always get the same error code. I also disconnected and removed the battery from the motherboard to reset the BIOS, still the same problem.

  Hi JohnyDick,

  This problem seems to be due to the updates of Windows, although it could be a coincidence.
  I first you recommend to remove the nVIDIA graphic card and connect the monitor to the onboard graphics card, then try to start the computer.
   
  If the problem persists then I recommend you to contact the computer manufacturer for assistance.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• CARD MEMORY 64 GB NOT RECOGNIZED BY MY MOBILE GALAXY NOTES II

  Dear Sir

  I use the 64 GB memory card in my samsung II Galaxy note, card memory sunddenly is not recognized by mobile and it was showing audit errors, other card memory running in my laptop. Help, please.

  Hola, BAVAJI

  Dear user
  Como otras memoria tarjetas is ejecutan en su celular, it check that el mismo acepta las nuevas tarjetas of 64 GB SDXC (extended capacity) son. Telefono VEA is if el este logo, o el manual.
  Means Quebec 4 32 GB SDHC (from alta capacidad) son.
  Asumiendo knew movil, if tiene el logo SDXC, entonces all lo siguiente:
  1- Por favor, in primer lugar, clean los pines of the tarjeta con alcohol isopropilico (o comun). Luego, see if works.
  - 2if no es asi, seguimos: apply the SDXC card in a laptop (o mas), directly known puerto, con a good useful (no UN lector tarjetas, ojo).
  3- Hacer copia of seguridad del contenido, y guardarlo in otro lugar.
  4- el icono of the tarjeta, haga click con el boton derecho del raton, y luego / Propiedades / Herramientas / Comprobacion errores.
  Suerte.

  Saludos, Alfred.

  -------------------

  Hi, BAVAJI

  Dear user

  As other cards of memory running on your mobile phone, check that the same accept new 64 GB cards, which are the SDXC (Extended Capacity). See if the phone has this logo, or in the manual.
  Don't forget that the 4 GB to 32 GB are SDHC (high capacity).
   
  Assuming that your cell phone, if the SDXC logo, then we will:

  1- please, first of all, clean the pins on the card with isopropyl alcohol (or common). Then see if it works.

  2- if not, we continue: place SDXC card in a laptop (or more), directly to its port, with a good adapter (NOT a card reader, an eye).

  3- make the backup content, then save it somewhere else.

  4- in the map icon, click on by the right button of the mouse, then use / properties / tools / error checking.

  Chance.

  Sincerely, Alfred.        (Google translation).