turn brush mode 'Behind' power with keyboard shortcut?

Similar Questions

• Watch OS shows 3 past mode of power with almost total of battery reserve

  Hello world

  I have a problem since I updated my watch to watch OS 3. Watch (series 1) goes into unexpected battery power with an almost total reserve mode. It produces one or two times a day and the only thing that I recognize that the watch remains black when I look at my wrist. It shows only the time in green numbers when I press a button and I need to reboot by pressing the two buttons. After the reboot, the watch displays + 80 or even 90 + % battery life and it works as expected for the rest of the day (if is not the same problem from happening again). Especially my battery is 50 + % at the end of the day.

  Today I reset the watch and recovered from backup, but that changed nothing. The watch went to the mode of power with a range of 78% a few minutes ago

  I am really frustrated because it happens very often and I could not find a solution to this problem. Decommissioning watch OS 2 is not an option...

  Thanks in advance for your help, I am really stuck on this issue.

  Best regards from Germany,

  Matthias

  Hi, Matthias

  If your dial of the Watch includes the complication of the battery, it is possible that accidental screen interactions are causing your issue.

  Tapping on the complication battery indicates the level of battery with a large button to put the watch mode of power reserve.

  You can consider using your watch for a while without this complication on the face of the watch to see if the issue is recurring:

  Change the face of the watch on your Apple Watch - Apple Support

• Toggle touchpad with keyboard shortcut for Dell XPS 13 (XPS L322X)

  Hello

  Is it possible to turn on/off the touchpad with a keyboard shortcut?

  Thank you!

  Karl

  I have a Dell XPS 13 and this has bugged me for a year. I have finally fixed it, via a registry command line:

  To disable the trackpad, run

  Tracking Add "HKCU\Software\Cypress TrackPad Driver\Device Select" v EnableTrackPad /t REG_DWORD /d 1 f

  To activate the trackpad, run

  Tracking Add 'Select HKCU\Software\Cypress TrackPad Driver\Device' v EnableTrackPad /t REG_DWORD 0 f d

  Note that disabling the trackpad shows a slight delay in it taking effect.

  To automate these commands, save each command in a batch file, for example turnoff.bat, turnon.bat, then you can run them from the windows, run the command (windows key + start typing the path towards the bat file) or via a shortcut app, like slickrun.

• Problems with keyboard shortcut

  I've updated my Mac and everything was fine until I had to restart it. My Photoshop keyboard shortcut became just random like this:

  I tried to restart my computer again, but there are no changes. The weirdest part is that when I tried to change the shortcuts, it will not work even if I clicked on accept and 'ok '. Is there a way I can turn it back? It wasn't like that when I got this back in November.

  quote from:

  https://discussions.Apple.com/message/23471905#23471905

  (1) while in Photoshop, go to "Keyboard shortcuts" under the menu 'Edit' in the Mac menu bar. The Panel "keyboard shortcuts and Menus" is displayed.

  (2) with the "Keyboard shortcuts" tab is selected (as opposed to "Menus"), double click on 'File' (has a triangle next to him) under the 'Application Menu Command' and select/highlight the "open...". "command.

  (3) without having to edit the shortcut sort, click on the button "Accept" right. And then 'OK' to close the Panel. This successfully re-introduced the hotkey "open".

  (4) at this point, you're probably thinking, ' my God, I have to repeat this process for each unique keyboard shortcut... ". ». But no, just 'accept' the "Open" command seems properly restore each other hotkey too!

• MagicPicker color wheel with keyboard shortcut Panel?

  Hello!

  There is a Control Panel for Photoshop named MagicPicker color wheel that sits in the window-> Extensions-> MagicPicker menu. Is it possible to assign a keyboard shortcut? I have found no way to do it in the Edit-> keyboard shortcuts... Thanks for any help!

  Hello!

  I'm Anastasiy, the head of the project making MagicPicker and other panels for Adobe software. Recently, I wrote a blog post how you can do it quickly and without fault:

  MagicPicker opened with a keyboard shortcut

  If you have any questions do not hesitate to contact our technical support.

  Anastasiy

• Insert variable with keyboard shortcut

  The keyboard shortcut only I can find it useful to insert a variable is CTRL-0. This color on the left side

  the status bar and you list gives complete variables user with the option - with 'not applicable' as the

  choice highlighted. It seems that you have to go through the list with the mouse pointer and

  Click on the desired value.

  Is just too cumbersome that call the variables pod upward and by double-clicking on the

  desired variable.

  Is there a way to define a keyboard shortcut to insert a particular variable?

  See you soon,.

  JP

  Oh, I've seen this before. Its a transitory problem. It happens intermittently, but it happens frequently semi for me. And I'm on the last large patched version of 10 FM.

• Photoshop CS3 refuses to comply with keyboard shortcut changes

  Hi all at Adobe forums.

  I'll have the wierdes thing. Photoshop CS3 dose do not want more with custom keyboard shortucts. I changed CUP F2 layer (Group) properties. And it dosent matter what I try, it will not work as it did before. To clarify, before, when I press F2 I get a dialog box to edit the properties of the layer (Group), basically rename box.

  
  I have reset all Photoshop, reset all settings, restored everything back to deafult but nothing.

  To help with this?

  More likely than an action in the Panel which has the F2 keyboard shortcut are assigned

• Satellite L850-138: drivers Win 7 - problems with keyboard shortcuts

  Hi guys. I did a clean install of windows 7-64 bit on Toshiba L850-138.

  I downloaded the 51 drivers here:
  [Satellite drivers L850-138: http://www.toshiba.es/innovation/jsp/autoDetect.do?service=ES&ACTION=PROCESS_DETECTION& TYPE = FORWARD & SOURCE = SMP & COUNTRY = 217 & RQS = TRUE & MODEL = SATELLITE + L850-138 & SERIES = 5C205022R & service = ES & LOCAL = & OSBUILD = 76 00 & SUB_TYPE = SMP & OSBITSIZE = 64, & PANUMBER = PSKDLE-01S002CE & ERROR = 0]

  Problem: Can not working keyboard shortcuts. The main ones are:

  * Brightness + /-(F2, F3)
  * Volume + /-(F9, F10)
  * Select Wireless (F12)
  * Toggle sound (F11)

  Is there a driver or a specific driver package to enable this feature? What is it?

  The complete list of drivers is the following

  BIOS
  Blue ray player
  card reader
  driver storage and technology of the utilityapid Chipset
  display driver
  Eco utility
  Hardware configuration
  Disk utility HARD SDD Alert
  Intel management engine interface
  LAN driver
  Wireless lan driver
  Wireless display
  Bluetooth drivers (monitor bluetooh and battery bluetooth bluetooth driver filter)
  USB driver
  Touchpad driver
  Webcam driver
  Multimedia controller
  Registry id perimeter network setting tool
  Registry patch
  Audio driver

  Creator of disc
  PC health monitor
  Game PC ready TIME
  Resolution + Plugin
  Service station
  Sleep utility
  Supervisor password utility
  Audio enhancement Toshiva
  TEMPRO
  Online product information
  Toshiba places Utility icon
  Toshiba Recovery Media Creator
  Toshiba hardware configuration
  Toshiba assist
  Service of Toshiba (toshiba service place link)
  Extra package:
  -TOSHIBA components common driver
  -TOSHIBA utilities
  -Password TOSHIBA utility
  -TOSHIBA Flash Cards
  -TOSHIBA PC Diagnostic tool

  So far, I have installed only the main engines. They are:

  [q]
  LAN driver
  AMD display driver
  Win 7 Sp1
  Software Intel chipset device (Chip Set Utility)
  Quick Storagee
  Audio Realtek
  Audio-ATI
  Synaptics touchpad driver
  atheros wireless driver.
  driver USB Intel.
  support controller y plugin
  the files in the patch + network ide device net
  Hardware configuration
  play ready
  resolution + MediaPlayer plugin.
  driver webcam
  Toshiba assist
  Wireless display
  Sleep utility
  Alert HD utility
  Audio Enhancer
  Service station
  [/ q]

  I don't want to install everything. I want to just install the bases for my system works. What are the factors of the shortcut keys?

  Thanks in advance.

  In order to get the functionality of buttons FN, you must install the Toshiba Value added Package.

  In addition, do not forget that the Fn buttons are enabled in the BIOS
  BIOS-> Advanced-> system configuration-> function (activated) keys

• Change Select Marquee 'style' with keyboard shortcut?

  My workflow often requires I change the selection rectangle "style" from normal to fixed ratio and even once, often back.

  How can I change the status of this setting "scrolling text style", using a keyboard shortcut, or action / macro?

  If this is possible, or even if it is not... Please advise, as I'm unable to understand and have become increasingly frustrated as a result!

  Thanks in advance,

  Jadik

  

  You can create presets for the various conditions and selection tools (one of) those that can be recorded in an Action.

• Problem with keyboard shortcuts in the filter dialog boxes - CS5 64-bit Windows 7

  While in the filter > sharpening > Unsharp Mask dialog box, I hit the < SPACEBAR > to get the hand in vain tool the screen cursor change cursor default 'box' so I tried again and still no change until I moved the mouse. then only the hand familiar tool icon appeared.  Good, so I then used hand tools, using the mouse to reposition my opinion and released the left mouse button, but the tool hand cursor remained on the screen until I moved the mouse again.  I have experienced the same problem (always in the filter > sharpening > dialogue emphasis) with the shortcuts of the Zoom tool using the ctl <>and < alt > key.  Not really a problem of killer but confused, not less.  Holder to try to solve the problem, I have known the exact symptoms same for each of the filter dialog boxes > blur filter > noise, filter > sharpness, filter > aesthetic and filter > other.  I also have Photoshop CS3 installed and all shortcuts work as expected.  Anyone else seeing this odd behavior?

  What you see is a bug.   We have an internal bug on this issue.

• Spaces of Exchange with keyboard shortcuts

  I like to switch between spaces using control-'space-number '. I prefer the keyboard number keys the numbers on the keyboard on top. keyboard internal rmbp as there is no keyboard, I need the numbers on the keyboard. How to operate the two? (I don't know about the keyboard in Control Panel and I prefer not to use additional software as for example carbine)

  Are there no other possibility to do (I want to use two combinations ctrl-ctrl AND keyboard keyboard) on El Capitan, w/o 3rd party SW? I used a hack any with 10.8 ML - but I forgot how ;(

• Turn off the volume on the keyboard shortcuts?

  So, I spilled some beer on my keyboard a few days ago. I've erased upward as far as possible, close the battery down/removed, it dried out as much as possible, etc. After a few days, everything seems to work fine... except the shortcut for lower volume (Fn + arrow left on my Lenovo) seems to be permanently.

  In fact, since everything is functional but aside from that, I hope to disable this shortcut. Is there a way to change the settings so that I can only adjust the volume control on the taskbar Panel?

  Hello

  As the problem you are experiencing is related to the material, it would be best to contact the computer manufacturer for assistance.

  Lenovo support: http://support.lenovo.com/en_US/

• Keyboard shortcuts do not work after changing the blending mode to a layer

  There is a strange bug that I experienced with photoshop. Whenever I change the blending mode to a layer (for example by selecting "Multiply" in the menu drop-down blending mode), my keyboard shortcuts stop working until I have click on the canvas again. It's annoying because often, I'll be on the Brush tool and I did draw on the canvas and press ctrl + z to re - activate keyboard shortcuts. I'm curious to know if this problem occurs to someone else and if anyone has found a solution for this.

  Version of Photoshop: 20150722r.168 x 64

  Operating system: Windows 10

  It happens on Windows, because the drop-down list with blend modes remains highlighted or active (around the blue line). You can press ENTER to confirm and delete the highest point around blend mode dropdown or use keyboard shortcuts to change the layer blending mode. To change the layer blend mode, you must have selected layer and then press Shift + Alt + letter for the blend mode. This shortcut does not work in the case where the tool you are using have mode option in the blending Options bar.

• How can I assign brush Angle of Rotation to a keyboard shortcut?

  I have a Wacom Intous4 Tablet and what to put in place where the touch ring controls the angle rotation of a brush.

  I went and combed through the forums here and a few others, better I can't hardly find subjects or the answer is more recent than a year.

  When I do the traditional search through google, the closest I found is basically "do predefined for each angle that you want, save these settings predefined in the form of action and then to create an action for each brush to use through the same stage. Assign keyboard shortcuts to actions. "

  I do not understand why such a complicated thing looks. I mean, you can control the size of the brush with keyboard shortcuts, wheel of the mouse even and Wacom Touch Ring regardless of what brush is selected. "Why the hell angle brush would be different?

  I must be missing something. How can I control brush Angle of Rotation using the Wacom Intous4 'Touch Ring'?

  You are right.  Definition of Photoshop a brush sample None seems a little strange to me.   You use a tool of type brush for model part of your image as a Brush tool to sample the color, the Brush tool of healing to sample a texture, the clone to sample set cloning stamp tool point what are not sample brushes they are elliptical brushes with features of special paint.  The other no sample brushes are adobe preset brushes that are hard or soft ellipses. All the other bushes are two new types of special brush or sampled bushes. New Special brushes have bristles of different qualities and can not be changed using Photoshop UI normal brush features diameter, hardness, Angle, roundness, spacing, Flipy and Flipx.  Photoshop UI can be used to change any special brush types features diameter, hardness, Angle, roundness, spacing, Flipy and Flipx. However, Photoshop scripts can change only Adobe created elliptical brushes. The user sets elliptical brushes are brushes sample.

  So its only possible to create shortcuts for Adobe created elliptical brushes.  If you can live with that here are two script that you can install in Photoshop CC 2014 upward.  Change Photoshop keyboard shortcuts and add shortcuts for scripts.  Add setting you Wacom preferences to use.

  BrushAngle-.jsx

  /*
  Brush Features(Diameter,Hardness,Angle,Roundness,Spacing,Flipy,Flipx)
        Diameter  range 1 to 5000
        Hardness  range 0 to 100
        Angle     range 0 to + or - 180
        Roundness range 1 to 100
        Spacing   range 1 to 1000
        Flipy     range 0 or 1 false or true
        Flipx     range 0 or 1 false or true
  */
  try {
    var features = getBrushFeatures ();
    var Diameter = features[0];
    var Hardness = features[1];
    var Angle = features[2];
    var Roundness = features[3];
    var Spacing = features[4];
    var Flipy = features[5];
    var Flipx = features[6];
  
    Angle = Angle-5;
    if (Angle <= -180) Angle = 180;
  
    //setBrushFeatures (Diameter,Hardness,Angle,Roundness,Spacing,Flipy,Flipx)
    setBrushFeatures ( features[0], features[1], Angle, features[3], features[4], features[5], features[6] );
    }
  catch(e) { alert(" set Brush features failed make sure you have a round tip brush active"); }
  
  //==============================================================================================//
  function getBrushFeatures (){
    //A Brush tool must be the current tool
      if (!app.toolSupportsBrushes(app.currentTool)) selectBrush();  //CC 2014
      var ref = new ActionReference();
      ref.putEnumerated( charIDToTypeID("capp"), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
      var appDesc = executeActionGet(ref);
      var toolDesc = appDesc.getObjectValue(stringIDToTypeID('currentToolOptions'));
      var brushDesc = toolDesc.getObjectValue(stringIDToTypeID('brush'));
      var currDiameter = brushDesc.getDouble(stringIDToTypeID('diameter'));
      var currHardness = brushDesc.getDouble(stringIDToTypeID('hardness'));
      var currAngle = brushDesc.getDouble(stringIDToTypeID('angle'));
      var currRoundness = brushDesc.getDouble(stringIDToTypeID('roundness'));
      var currSpacing = brushDesc.getDouble(stringIDToTypeID('spacing'));
      var currFlipy = brushDesc.getBoolean(stringIDToTypeID('flipY'));
      var currFlipx = brushDesc.getBoolean(stringIDToTypeID('flipX'));
    var currentFeatures = new Array( currDiameter, currHardness, currAngle, currRoundness, currSpacing, currFlipy, currFlipx );
      return currentFeatures
  }
  
  function setBrushFeatures (Diameter,Hardness,Angle,Roundness,Spacing,Flipy,Flipx) {
      var desc = new ActionDescriptor();
      var ref = new ActionReference();
      ref.putEnumerated( charIDToTypeID( "Brsh" ), charIDToTypeID( "Ordn" ), charIDToTypeID( "Trgt" ) );
      desc.putReference( charIDToTypeID( "null" ), ref );
      var desc1 = new ActionDescriptor();
      desc1.putDouble(stringIDToTypeID('diameter'), Diameter);
      desc1.putDouble(stringIDToTypeID('hardness'), Hardness);
      desc1.putDouble(stringIDToTypeID('angle'), Angle);
      desc1.putDouble(stringIDToTypeID('roundness'), Roundness);
      desc1.putUnitDouble( stringIDToTypeID('spacing'), charIDToTypeID('#Prc'), Spacing);
      desc1.putBoolean(stringIDToTypeID('flipY'), Flipy);
      desc1.putBoolean(stringIDToTypeID('flipX'), Flipx);
      desc.putObject( stringIDToTypeID('to'), charIDToTypeID( "Brsh" ), desc1 );
      executeAction( charIDToTypeID( "setd" ), desc, DialogModes.NO );
  }
  
  function selectBrush() {
    //select brush scriptlistener code
    var idslct = charIDToTypeID( "slct" );
    var desc12 = new ActionDescriptor();
    var idnull = charIDToTypeID( "null" );
    var ref8 = new ActionReference();
    var idPbTl = charIDToTypeID( "PbTl" );
    ref8.putClass( idPbTl );
    desc12.putReference( idnull, ref8 );
    executeAction( idslct, desc12, DialogModes.NO );
  }
  

  BrushAngle + .jsx

  /*
  Brush Features(Diameter,Hardness,Angle,Roundness,Spacing,Flipy,Flipx)
        Diameter  range 1 to 5000
        Hardness  range 0 to 100
        Angle     range 0 to + or - 180
        Roundness range 1 to 100
        Spacing   range 1 to 1000
        Flipy     range 0 or 1 false or true
        Flipx     range 0 or 1 false or true
  */
  try {
    var features = getBrushFeatures ();
    var Diameter = features[0];
    var Hardness = features[1];
    var Angle = features[2];
    var Roundness = features[3];
    var Spacing = features[4];
    var Flipy = features[5];
    var Flipx = features[6];
  
    Angle = Angle+5;
    if (Angle >= 180) Angle = -180;
  
    //setBrushFeatures (Diameter,Hardness,Angle,Roundness,Spacing,Flipy,Flipx)
    setBrushFeatures ( features[0], features[1], Angle, features[3], features[4], features[5], features[6] );
    }
  catch(e) { alert(" set Brush features failed make sure you have a round tip brush active"); }
  
  //==============================================================================================//
  function getBrushFeatures (){
    //A Brush tool must be the current tool
      if (!app.toolSupportsBrushes(app.currentTool)) selectBrush();  //CC 2014
      var ref = new ActionReference();
      ref.putEnumerated( charIDToTypeID("capp"), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
      var appDesc = executeActionGet(ref);
      var toolDesc = appDesc.getObjectValue(stringIDToTypeID('currentToolOptions'));
      var brushDesc = toolDesc.getObjectValue(stringIDToTypeID('brush'));
      var currDiameter = brushDesc.getDouble(stringIDToTypeID('diameter'));
      var currHardness = brushDesc.getDouble(stringIDToTypeID('hardness'));
      var currAngle = brushDesc.getDouble(stringIDToTypeID('angle'));
      var currRoundness = brushDesc.getDouble(stringIDToTypeID('roundness'));
      var currSpacing = brushDesc.getDouble(stringIDToTypeID('spacing'));
      var currFlipy = brushDesc.getBoolean(stringIDToTypeID('flipY'));
      var currFlipx = brushDesc.getBoolean(stringIDToTypeID('flipX'));
    var currentFeatures = new Array( currDiameter, currHardness, currAngle, currRoundness, currSpacing, currFlipy, currFlipx );
      return currentFeatures
  }
  
  function setBrushFeatures (Diameter,Hardness,Angle,Roundness,Spacing,Flipy,Flipx) {
      var desc = new ActionDescriptor();
      var ref = new ActionReference();
      ref.putEnumerated( charIDToTypeID( "Brsh" ), charIDToTypeID( "Ordn" ), charIDToTypeID( "Trgt" ) );
      desc.putReference( charIDToTypeID( "null" ), ref );
      var desc1 = new ActionDescriptor();
      desc1.putDouble(stringIDToTypeID('diameter'), Diameter);
      desc1.putDouble(stringIDToTypeID('hardness'), Hardness);
      desc1.putDouble(stringIDToTypeID('angle'), Angle);
      desc1.putDouble(stringIDToTypeID('roundness'), Roundness);
      desc1.putUnitDouble( stringIDToTypeID('spacing'), charIDToTypeID('#Prc'), Spacing);
      desc1.putBoolean(stringIDToTypeID('flipY'), Flipy);
      desc1.putBoolean(stringIDToTypeID('flipX'), Flipx);
      desc.putObject( stringIDToTypeID('to'), charIDToTypeID( "Brsh" ), desc1 );
      executeAction( charIDToTypeID( "setd" ), desc, DialogModes.NO );
  }
  
  function selectBrush() {
    //select brush scriptlistener code
    var idslct = charIDToTypeID( "slct" );
    var desc12 = new ActionDescriptor();
    var idnull = charIDToTypeID( "null" );
    var ref8 = new ActionReference();
    var idPbTl = charIDToTypeID( "PbTl" );
    ref8.putClass( idPbTl );
    desc12.putReference( idnull, ref8 );
    executeAction( idslct, desc12, DialogModes.NO );
  }
  

• Difficult to change the sizes of brush with keyboard commands

  Hi all

  All of a sudden I have problems change of brush sizes, hardness etc. using keyboard shortcuts. Additionally, when you try to use a brush with a taper on it (which I would like to get rid of), he refuses to go.  Sometimes I can use keyboard controls and all that after I chose another tool and back brushes (or dodge or burn), say brush, click on the arrow icon, then back to the brush and use the keyboard command, or click on the program and back in.

  It is not Yosemite, it started before that, but don't know when.

  I'm on an iMac running Yosemite 10.10

  Thank you

  Could it be! Menus, shortcuts, Lasso tool, or Photoshop constantly run when using a Wacom tablet. Mac OS

  Adobe has a white window plugin to solve this problem.

  Gene