Turn off the switch in the Apex

Similar Questions

• Light (switch) on my screen does not turn off. I have to shut my computer down several times a day to turn off the monitor.

  Light (switch) on my screen does not turn off.  So, I shut down my computer and restart several times a day, because when I put it in mode 'sleep', he wakes to the top in a few minutes and will not fall asleep.  I could put a blanket on my screen when not in use, but I'd rather find a way to make it stay asleep when I tell him.

  Light (switch) had already done once before and I was so worried that once I turned off the monitor that I would never get it new on... a bit short of money here, to buy a new monitor, but the next day, I pressed the power button with an additional downward pressure and I could so he could start working again (able to turn the market monitor).  It was about 3 weeks ago.  Now, the light stays green, unless I stop the whole computer.

  Maybe my main problem is sleep mode, which removes the screen for like 2 minutes and then he wakes up to the top and is so rude when I myself and try to sleep, I just turn off the monitor everytime I put the computer to sleep.

  Now, I can't turn off the monitor, except by turning off the computer.

  Hi JDandGinger,

  I suggest you follow the provided article and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-power-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

  If the problem still persists contact the manufacturer of the monitor for more help and information.

• How can I change/turn off the led under the speakers on Satellite P100?

  How can I change/turn off the led under the speakers? (in Satellite P100 (PSPA6E))
  Now I see the light only in the left side, but when I bought the computer left and right led line lights blue under the speakers.

  Gazz's right. It is not possible to switch off the LEDs. If just one LED is on the other must be faulty. Contact the customer Service of your country partner. I'm sure they can disconnect one too if you n t need her.

• Should I turn off the keyboard and bluetooth mouse off?

  Hello

  I'm new to Apple products and have recently purchased an iMac with keyboard and mouse compatible bluetooth.  The are a switch on each accessory to activate the bluetooth on or off.  Should I turn off after closing down to save the battery power or not this wear simply on the switches.  Not sure if stop actually stops transmitting wireless accessories, or if the latter uses the negligible power when the computer is turned off.

  Thank you

  JosfromSydney

  JosfromSydney wrote:

  Hello

  I'm new to Apple products and have recently purchased an iMac with keyboard and mouse compatible bluetooth.  The are a switch on each accessory to activate the bluetooth on or off.  Should I turn off after closing down to save the battery power or not this wear simply on the switches.  Not sure if stop actually stops transmitting wireless accessories, or if the latter uses the negligible power when the computer is turned off.

  Thank you

  JosfromSydney

  Yes switches turn off the wireless, and yes they use negligible power when the computer is turned off.

• Satellite A660 how can I turn off the light on the power button?

  Hello, I recently bought a new Toshiba A660-1FL.

  However mind, lighting of the multimedia keys, if I work in the dark.
  In the Bios, I could disable the led lighting, but the on/off switch is always lighting, which distracts me when I'm working.
  This laptop has two power LED, so the lighting power is in my view, unnecessary.

  My question is: How can I turn off the light on the power button?

  Hello

  The power button led cannot be disabled.
  It s there if the laptop is turned on.
  The lighting in the BIOS option only controls the multimedia keys...

  Welcome them

• turn off the iphone screen 6

  How do I turn off the display of the iPhone 6 or set the time

  Settings > general > self-locking > choose the desired time.  You can also click the sleep/wake button to turn off the screen. Get help with buttons and switches on your iPhone, iPad or iPod touch - Apple Support.

  -AJ

• How to turn off the blue LEDs under the speakers on Satellite P100?

  Hello

  I have a P100-143. The laptop is great. How can I turn off the blue LEDs under the speakers? It's very scary and absolutely useless. If anyone has a solution, please share it. THX.

  Hello

  AFAIK there is no switch or something similar. I presume that the only solution is to cut the cable.

• How to turn off the 3 g 2g

  Help, please

  How to turn off the 3 g or 2g? I don't want my phone to be constantly pulling down or obtaining data when he feels like it and I can't find the setting. I don't want the wireless on except if I choose...

  Cheers for the help

  If you want to switch between 3G and 2G to save battery: settings | Wireless controls. Mobile networks | Select network.

  If you want to disable the data without the use of airplane mode which also disables your vocation (which looks like), search the market for APNdroid. Great app that will do it. It is light. Just make sure that you have disabled (i.e. to have access to the Internet) before uninstalling. It does nothing with the wifi.

• Should I turn off the keyboard and mouse after use or leave?

  I find it annoying to switch the keyboard power continually because of the password on and off.   Wouldn't be much difference to the life of the battery to let both mouse and keyboard lights permanently?

  I have never turned off the mouse or the keyboard. The batteries have been used for about a month, with the mouse to 60% and the keyboard to 90%.

• monitor turns off turning off the kitchen light

  I know that sounds weird, but I have a problem for some time now. I have a trash can end 2013, Mac Pro and Eizo monitor connected by a miniDisplayPort to DisplayPort cable. When I turned off the light in my kitchen, the monitor lost the signal from the Mac for about 10 seconds, and then returned. It was an annoying problem, but I could live with it.

  Now, after the last update to OSX, the problem got worse. The screen loses the signal, but can't find again as before. Even if I unplug & plug the cable displayport, I can get the screen on again once. Only if I use a MiniDisplayPort to DVI, I can make it work with a bit of luck. Then, when I plug the miniDisplayPort to DisplayPort cable and unplug the DVI adapter, it finds its 'report once again... also with a bit of luck and after switching around between outputs 6.

  I have no idea how to solve this problem. And I can't use the DVI adapter because it does not support native of 27 "screen resolution (only until 1920 px I think).

  Any idea on what could be the cause of this problem is welcome!

  I would try to eat the Mac and the monitor by a UPS (uninterruptible power supply).

  Also try plugging the Mac and the monitor in the taken away from the light switch.

  Sounds like you have an electrical problem in the House

• How to turn off the microphone for sony hdr-pj260v

  How to turn off the microphone for sony hdr-pj260v

  Hi dstrakal,

  Option to disable the built-in microphone is not available in the camcorder. However, the camcorder has an input jack to connect an external microphone, there are two possible solutions for this:

  1. Connect a microphone with a switch ON / OFF the microphone on the camcorder decision-making. Then, set the switch to the external microphone to the OFF position. This will disable the microphone on the camcorder.
  
  
  2. Connect a dummy stereo mini plug to the microphone on the camcorder Jack.

  If my post answered your question, please mark it as "acceptable Solution".

• E 7520 HP All - In - One Printer: turn off the power to the wireless printer

  I have not printed for a few days I have not noticed if my Wi - Fi connection worked.

  I tried to print wireless today and got the error message that the printer was not connected to the internet.  I tried to go wrong, but it did not help.  I checked the connection to the wireless router and put the password in.  It has not yet recognized it.  I tried to disable printing for my smart phone (I think it is called), but the screen froze on the circle showing the progress.

  I tried to turn off the printer with the power button, but that no longer works.

  The Wi - Fi light just keeps blinking.

  How can I disable the printer may reset?  Or can you help get my printer to recognize my wireless again?

  Thank you.

  Hi Rhonda, there.

  I would suggest to unplug the power cord from the printer without turning it off with the switch, it will do a reset without getting rid of all the parameters. You simply leave unplugged for about 1-2 minutes to clear out any power.

  I recommend then reconnect, and doing as much as you can from the guide below:

  Printer keeps no connection Wi - Fi

  Good luck and let me know how it goes

• my intranet connection was turned off the coast how I turn it back on?

  my intranet connection was turned off the coast how I turn it back on? (or my wireless connection)  I tried to click the wifi icon but it just says that it is not connected.

  Hi karmahome,

  Follow these steps:

  1. click on the button "Start" and then click on the "Control Panel" icon in the start menu.

  2. click on the link "switch to category view" in the left pane of the Control Panel window if the window is not already assigned to the category view. You will see the 'network connections' icon in the right pane. Double-click this icon to open the network connections window.

  3 right-click on the icon of the adapter wireless network in the network connections window, then click the "Properties" link in the context menu. This opens the wireless network connection control panel.

  4. click on the "wireless networks" tab in the wireless network connection control panel. Check the box 'use Windows to configure my wireless network'.

  5. click on the 'OK' button in the wireless network connection control panel.

  For reference:

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

• HP Probook 645 G1: Turn off the wifi when it is connected to the wire

  Hello

  I have a HP 645 Probook G1 A4 - 4300 M / 4 GB / 500 GB SSD/DVDRW/14 "HD/W7P 64B latptop.

  I also have a model Dockingstation REPLACEMENT-I10X.

  I have attached an ethernet cable on the docking station that works. My problem is that when I connect my laptop to the docking station. Get a priority above wired wireless. If the laptop still uses wireless unless I turn it off manually.

  Ofource I want to log out manually. I want the phone choose wired when wired and wireless when wireless.

  I tried a couple things:

  1. I went setings adapter--> advance--> Advance settings--> moved the connection to the lan network to a network connection wireless, top of page bottem. it did not work

  2. I manual put several metrics in connection properties (internet protocol 4 & 6--> Properties--> Advanced--> change automatic metric to manual and filled a small number to wired connection (No. 5) and filled a higher number (No. 250) to the Wi - Fi connection.) it did not work

  3. looked in the bios menu. There is no option to change the priority or something like that.

  Now, I always disconnect the wifi when I'm attached to the docking station (even tried plugging an ethernet straight cable to the laptop, but that has not helped either). Problem is when I unlock the laptop from the docking station, I have to manually reconnect to the wireless network.

  Additional info: since my laptop is always closed when it is locked on the docking station, I cannont press the WIRELESS button to disconnect or connect.

  Any suggestions help would be greatly appreciated.

  Hello:

  See if the BIOS of your laptop computer has a LAN/WLAN, commissioning.

  On my HP Elitebook 6930p it is a parameter to enable the LAN/WLAN switch that automatically turns off the wireless card when an ethernet cable is connected, and vice versa.

• Turn off the SAN MD

  I got a MD3200i and MD1200i in the configuration of VMware.

  We are required to move them into another basket.

  I closed all the VMS or migrated them and turned off the ESXi servers.

  Then I turned off the MD3200i by pressing the on/off switch.

  I waited for a while and then off the MD1200i by pressing the power button.

  However, sounds like a Jet engine 1200i...

  Is this normal and when will be turned on without danger move the two units?

  The process worked, I switched on the 3200, then the 1200 and waited about 10 minutes.

  Power on ESXi servers and via vCenter, can access all volumes of MD

  Thank you

• How can I turn off the monitor (e.g., "standby") via the command line at the push of a button (or any other shortcut need not additional software)?

  Hello

  I don't like it when, after a break from work on my PC, the screen turns off as set up through "Power Options" in the control panel. That's why I put the relatively high threshold.
  However, when I know that I will not need the computer for a while, I want to save energy and wish the mode "sleep" could be activated immediately. Turn off the screen is not an option, because it has a USB hub built-in - off completely would be to unplug any connected device. Usually, if the computer has always works and might need the resources connected.

  Ideally, by pressing a button (or start a program or something), the screen would immediately go in mode 'sleep'.

  On systems prior to Vista and 7, IIRC, running a command in the sense of:
  Rundll32.exe user32.dll, SendMessage (HWND_BROADCAST, WM_SYSCOMMAND, SC_MONITORPOWER, 2);
  would do the trick. The dll should run the command to set the monitor to sleep. We could create a shortcut or even integrate the command in a batch file, but unfortunately it doesn't seem to work on Vista or 7.

  Does anyone have an idea on how to do it on Windows 7?

  I would strongly try to avoid having to install any additional software to help me. (There is quite a little all about, even free applications that promise to do exactly that, but I want to avoid them if possible.) "And I can't believe that this basic that could be done on XP cannot act more on 7!).

  Thank you for your help,
  NicApicella

  Hello

  Sleep is one thing and switching Off the Display is quite another.

  I found a way to turn off the screen in case you don't have a hardware switch or a keyboard shortcut as in my Dell Inspiron laptop (Windows 7).

  Create a batch with the following script file:

  echo off

  C:\Windows\System32\powercfg.exe-changer - monitor-timeout-dc 1
  C:\Windows\System32\powercfg.exe-changer - monitor-timeout-ac 1

  START/min/Wait C:\Windows\System32\scrnsave.scr s

  C:\Windows\System32\powercfg.exe-changer - monitor-timeout-dc m1
  C:\Windows\System32\powercfg.exe-changer - monitor-timeout-ac m2

  with the idle time to turn off your screen set in the Control Panel, replace m1 and m2.

  Control Panel > Power Options > any 'Active' diet Plan > change Plan settings > disable the display setting (minutes).

  For example, in my computer laptop m1 = m2 = 30 and 10.

  Now create a shortcut to the batch file and optionally assign a keyboard shortcut and an icon.

  Explanation of the script:

  The first two commands sets the idle time Display Off for the minimum possible setting of 1 Minute for the AC and DC (battery) power. The third command put the system mode blank screen saver 'instantly' and / Wait for the screensaver to terminate application. After 1 minute of inactivity, the monitor turns off power completely.
  The Saver screen/Wait is over by the event of the reactivation of a movement of the mouse button, the last two lines of code will come back the idle time-out settings of origin defined in the Panel view. This to ensure that after waking up, the display does not Turn off all 1 minute of inactivity expire.

  Kind regards

  Sushovon Sinha