turn off validation of EDI

Similar Questions

• Turn off validation in the PPR

  Scenario: I have a poplist and a layout of the form Panel. PanelFormLayout fields are based on a VO EO and some of them are mandatory. (mandatory checkbox is checked in the OT).
  Value in poplist, some fields in formatting of Panel should be made or hidden.
  So I put the property made of these fields to be based on the value of poplist I put partial triggers formatting Panel equal to the id of the poplist field.
  
  Question: when I change the value of poplist, validation appears to fill the required fields for formatting Panel. but ideally, the user must be able to complete the mandatory fields after changing the value of poplist.
  If the mandatory verification must be performed only during the button apply and not during the change of poplist.
  If I delete partial triggers on the panelform provision, validation does not occur.
  but the partial triggers is necessary because the fields must be rendered dynamically.
  
  I tried to keep submit auto - real and immediate properties-true on poplist field. but still the validation is not stopped.
  I also tried to change the validation property of the page to true def break. but still no use.
  
  
  
  Please suggest an alternative.
  
  Published by: user12774118 on December 13, 2010 10:09
  
  Published by: user12774118 on December 13, 2010 10:10

  I guess poplist being mentioned here is selectOneChoice component - having autosubmit = 'true' and immediate = "true."
  ensures the valueChangeListener is called & validations are ignored.

  In addition, according to the post, in order to hide the columns, you use the property made - use visible for the same property, that the use of property rendering would you want to delete the part from the hierarchy tree of component who built the frame and cause other problems.

  Thank you
  Nini

• Turn off validation account in application settings

  Dear Experts,

  I want to temporarily disable blocking controls by removing the account of control at the top of the ValidationAccount parameter.

  The reason is that we need to lock the data before the S9 to V11 technical migration. Once the data is locked, I bring you the ValidationAccount.

  Is there a risk to do?

  Thank you.

  Benoit

  Hi Benoit,.

  You should not have problems, but what is the purpose of lock data?

  If I were you, I would open all the data to ensure that all changes will immediately affect the data.

  Kind regards

  Thanos

  A truth about...:... HFM Application Copy Utility

• Turn off validation for LOVs cascading messages

  Hello
  
  I created LOVs cascade (input text with a list of values) by calling af:query. When a value is entered in the function LOV (say Subclass) without entering a value in the LOV(say Class) Parent, I get an error message "Invalid Value". Is it possible to disable these error messages?
  
  Thank you
  KK
  
  Published by: 842704 on July 21, 2012 19:51

  you use this type of snippet
  http://jobinesh.blogspot.com/2011/03/retrieving-viewcriteria-from-custom.html

  or can u paste what you do?

• turn off the prompt of telemetry

  Windows XP, Firefox 17.

  I can't turn off the prompt of telemetry. If I change '2' to '0' to the subject: config, it jumps right back to 2 and does not leave my changes or permanent. Clicking 'No' to the command prompt only works for the session. Help!

  You are welcome.

  There's only one file prefs.js with valid content.
  
  If other software (security) maintains a lock on files or protect it from the changes to the files then Firefox is not able to update content and you have problems.

• Satellite X 200-203 turns off when turn off the power

  Hello

  first of all, excuse my bad English please.

  Since 2 days I have the satellite X 200-203 portable and my first problem is that the battery does not load.
  When I connect the power he works very well, but did I unplug the power replisse or the laptop turns off. under vista it shows me always a 89% battery power, ALWAYS.

  What can I do?
  at least, the satellite logo lights up red annymore.

  Thank you

  Hello

  According to your description, the battery provides the laptop with power.
  In my opinion there is problem with the battery itself or electronic supply on the motherboard.
  I think that it of a failure of battery, but to be 100% sure that the audit of the books is necessary!

  The X 200 is a new series of laptop so I'm 100% sure that the guarantee is valid. Am I wrong?

  If you shouldn't t waste time and contact the service provider authorized in your country.
  The guys of the explain your situation and ask for later handling.

  Each cheque replacement and part is done for free!

  Good luck & congratulations guy ;)

• Satellite A660 - optical driver turns off when burning DVD

  I have a problem with the optical drive of energy saving options that disables the drive while burning.

  I tried all the suggestions mentioned here [http://forums.toshiba.com/t5/Satellite-Laptops-A-Series/Optical-drive-automatically-turns-off-due-to-power-saver/td-p/223654], but it does not help.

  I start at the burn in Ashampoo Burning Studio free, and he seems to be good until the end. When it starts the process of lead-out the popup of the optical signals Drive Power drive is turned off. It's funny because it is still running at the speed of combustion and it will not stop. The reader becomes unresponsive, even I can't the DVD out. Even, that it disappears from the list of devices.

  The only way I thought so far to stop the car and release the DVD is in the shutdown/Hibernate the computer.

  Once the dive starts working again the STRANGE Fn-tab functionality started working and I can turn it on/Off/ejection at will.

  All the burned DVD - s are not valid, and so far I have not managed to burn a single functional DVD.

  I have a Toshiba Satellite A660 - PSAW3E with Win7 Enterprise 64-bit.

  Is there a way to fix this? Remove the optical drive power management?

  Hello

  To be honest I have never heard of this issue, but it appears that the optical drive power management is part of the power of Toshiba configuration utility.
  Part of the Toshiba value added package configuration done Toshiba power utility.

  What you can try, for testing purposes, to remove the Toshiba added value of the system package, restart your computer and try to burn DVDs again to see if the same problem will occur again.

  Toshiba value added package contains several tools such as utility cards flash FN so after his withdrawal, you will not be able to use the FN keys. In any case, after that trial, you can download and install Toshiba value added package again.

  I mean, I know what kind of conflict is there, but maybe you should consider it.

• Satellite A30-141 heats up and turns off

  Hi I have been using A30 - 141 for about 2 years. The laptop is always used for heating and will turn off. I saw the fans cleaned for abt 4 times now. Should I send again, or there at - it another option of sort it. I still have extended warranty.

  Hello

  If your warranty is valid, then you should use it.
  There is a better way to solve this problem.
  You know, the overheating problem is causes of different reason.
  One of the reasons might be not working properly cooling module or of dust and debris in the fan grids.
  However, your laptop is covered by the warranty and if there could be adtinonal something wrong with the hardware if all diagnostic tests and the replacements will be will do for free.
  I recommend so contact the Toshiba ASP in your country.

• Satellite M30X-102: power question - unit suddenly turn off

  Hello!

  I have a portable Satellite M30X-102 and about a year ago and a half months he started to turn off suddenly. First of all, it looked like an overheating problem, but also disabled directly after that I pressed the power button and sometimes it worked 10 hours without any problem, also, when it is off, power LED was flashing until I have Nations United - and replugend the power cable. If the battery was, he was immediately released.

  I sent it to repairs. They only cleaned the cooler and changed the dough to thermal conductivity and for a few days, the laptop worked normally, but about half hours ago, it happened again. I am convinced now that this is a power supply problem, possibly the power cable.

  You have any suggestions of what I could do, or should I send it back with a note that it is a power supply problem?

  Thank you

  [Edited by: admin March 23 06 06:56]

  Hello

  In my opinion, you should contact the service because it can start diagnostic tests.
  For me, this looks like an electronic malfunction of power supply.
  If the laptop has been repaired it there a few days/weeks, so I guess that the guarantee is valid.

• Satellite L300D-119 turns off suddenly without particular reason

  Hello

  just while I do things randomly on my laptop, it just turns off. And it's not like when I press 'Shut Off' on the start menu, it stops completely, and the screen goes black.

  The PC itself is not overheated or anything in this case.

  I am very concerned, does anyone know how to do? In this case, thank you very much.

  Hello

  You must understand that no one here can say with certainty why this happens, and if this happens continuously, you must contact the nearest service provider and ask for help.
  They check your laptop. The warranty is valid, and if something needs to be done it will be done for free.

• It turns on then turns off immediately... BUT this isn't memory

  • I contracted memory current, cleaned and reinstalled it several times.
  • I also tested each strip memory independently and in different nodes.
  • I also tested a new working memory in two slots.
  • I also checked to make sure that the switch was not right.
  • The fan turns on but turns off as it stops.
  • There are NO beeps.
  • There is no flashing lights.
  • It is fully charged and can load.

  Any ideas?

  No problem, I understand that you're upset. It's normal.

  I'm just trying to show you I want to help you not to fight with you.

  To me, it seems that you have a defective problem with GPU.

  Usually, a graphics chip redistribution solves this problem.

  This is a common problem with these models.

  Information on this solution, you can find here.

  I particularly recommend the validation number 9 that is written by CherylG.

• my laptop turns off when I play a gamehouse game. can you tell me fault could be the problem?

  whenever I try to play a game on gamehouse games my laptop turns off.  can you tell me whats going on.

  Hello

  1. what operating system is installed on the computer?

  2. this happens with all games or only on that particular game?

  3. you get any error message?

  4. are you play online or is installed on the computer?

  5. don't you make changes to the computer until the problem occurred?

  I suggest you to follow the steps from the link below and check if it helps:

  Game hangs or quits unexpectedly: http://support.microsoft.com/kb/303032

  (The above article is also valid for the game GameHouse)

  Hope this information is useful.

• Windows 7 - preparation set up windows. Do not turn off.

  I got this new toshiba laptop with windows 7 and it starts up and started using it. activated the 30 days free trial norton, surfing the internet and worked on some pictures for my sister. When I went to close it it says something like "installation 59 updates ' he has done fast enough, then it turned off. I went to meet my sister and when I turned on the laptop, he said 'preparation set up windows. do not turn off"he was stuck on this for hours, about 2 or 3. I thought that maybe he was stuck so I turned it off. I turned it back and he was still stuck on this same configuration screen. I turned off then turned it back and went into safe mode. I did a restore to before the updates 59 which was only a few hours earlier. I restarted the laptop and it looked pretty good. then I noticed he was saying something about the norton is maybe defective. he wouldn't let me turn on the antivirus and firewall. he wouldn't let me enter the network. I can't get on the internet basically can't do anything. It seems to work, but it is not. now, whenever I stopped it it starts to install the updates and when I start it again, it goes to the preparation set up the screen. I even left it for a day and a half on the screen configuration and nothing. What is the problem with my laptop brand new?

  Usually a single word explains what causes these problems - Norton !
  Is the laptop still under warranty? If so, Toshiba needs then provide support for problems with the operating system.

  Instead of contact Toshiba, then through the dance where they try to blame Microsoft and will not help you, if the laptop is a recent purchase so I suggest you press on press F8 key just after you press the power button.
  If you do not press F8 in time then Windows 7 will attempt to load and you will have to wait until she did try to do.
  Shut down the laptop and reboot again, by pressing F8 to only a Boot Menu appears.

  In the upper-left corner of the Start Menu should be a link to repair your computer .
  Choose this option.
  The System Recovery Options window should now appear. This is what it will look like - What are the system recovery options windows 7?
  At the bottom of this list there should be a Toshiba provided option that will allow you to do a clean/restore Windows 7 install.
  If she's not here so Toshiba should have provided you with a recovery with which disk you can boot up the laptop and then access the system recovery.

  Do a clean reinstall of Windows 7 (a format of the hard drive) and the installation of Windows 7.
  Once you have done this, and the system has rebooted for the last time, uninstall all Norton products immediately by clicking on the start ORB,
  in the field of research to install type.
  Under control panel, click on the link "view the programs that are installed on your computer.
  After you have uninstalled the Norton "tricks", restart the system.

  Update the computer laptop now, install the updates offered in groups of 10 only ! Yes it's more slow their installation at once, but... you already know the result to install all updates at once, right?

  When all updates and required reboots are finished, suggest you only install the freeMicrosoft Security Essentials or Avast.
  Both are valid antivirus programs, and both are compatible with Windows 7.

  MowGreen
  Expert in Windows IT Pro - consumer safety

  * - 343-* FDNY
  NEVER FORGOTTEN

• accidentally turned off during the update of windows

  Guys, im using sony vaio with vista premium OS and it is automatically updated, I had used to remove my battery for use at home, during the update of windows, I accidentally kick off the power cord and it disconnected from the main power switch and turned off, when I open it I saw a note on the bottom right 'tm this copy of windows vista is not authentic.

  someone could help me on this guys, how can I do recover without reformatting my laptop.

  Please help me guys...

  Thanks in advance...

  Needless to say, cutting the current during the update process can cause all sorts of problems - many not even related to the update itself.  It is a common branching.

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.  I don't know if this will solve the problem, but it might.  It's worth a try (and it can be useful if there are other problems that you have not yet detected).  Whether or not it works, you will need to re - install the update (and this time won't turn off - LOL).

  If you still have the problem of validation after system restore, and then click Start / computer / system properties and check the bottom of the Activation section.  Your system always shows that it is enabled?  If this isn't the case, then reactivate.  To activate manually, go to start, search, and type in slui 4 enter.  Enter your country and press Next.  You will be on a screen with a phone number and a bunch of codes below.  Dial the number and browse automatic guests until you get to a human being.  Have your handy product code because it will be asked.  Explain the situation, but it's the same PC.  They should give you a code to enter on this screen to activate Vista.

  If this does not resolve the "not genuine" message, please post your problem in the Windows Genuine Advantage Forum: http://social.microsoft.com/Forums/en-US/genuinevista/threads , where the experts on this kind of problem will be more than happy to help you with your problem.  They will probably ask you to run a program and download the results so they can examine in order to find the problem - just follow their instructions.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My computer is stuck in "configuration updates: stage 3 of 3 0% complete.". Do not turn off your computer. It restarts just over and over again with the same message.

  I have a Dell Inspiron 1525 with Windows Vista, and I have tried the following to fix my endless reboot with the "Configuring updates: stage 3 of 3 0% complete.".  Do not turn off your computer. »

  • I inserted the cd 'Réinstallation DVD Windows Vista', but it won't pop up any kind of prompt for me to do something with it.  I tried putting the cd in what was on the computer and tried leaving him in and restart it - but the cd has no EFFECT.
  • I used the F8 key and I tried the following with no luck: safe mode, safe mode with network, safe mode w / command prompt, enable logging, last known good configuration (Advanced) boot and debug mode.  Most of these options make the monitor off (to make you think he will do something), then it just restarts and did the thing reboot loop again and again.
  • I also tried the repair your computer option to the F8 key.  He asks me to log in as an administrator (but my password does not work).  So, I use the menu drop down and choose the name of my computer and then use my password, and I can connect to "restoration of access options '.  Once I'm in the "System Recovery Options".  I tried the following with no luck: Startup Repair tool, restore the system, Windows complete PC Restore, Windows Memory Diagnostic tool and command prompt.  THE only ONE that I HAVE NOT YET TRIED it IS THE "DELL FACTORY IMAGE RESTORE", it's because I want to try to fix it without losing everything on my hard drive.  Here are the details of the I've tried in the "System Recovery Options".
  • The command prompt says: 32 X:\Windows\system > (I have no idea how to use it, but it's what he says)
  • The memory diagnostic tool reboots the computer, but nothing new happening (just reboot over and over again)
  • In the PC restore full Windows: I tried to put the Windows Vista CD in, but it can not find a valid backup location
  • When I click on the system restore: it is said: "no restore points were created on your computer's system disk.  To create a restore open system protection point.  When I click on the system protection, it is said: "your computer is running in a limited diagnostic State.  If you use the system restore in this limited State, you can't undo the restore operation.  Help topics are not available in this State. "  So I press OK, and I'm back to square one.
  • When I click on startup repair: it says "Startup Repair could not detect a problem.
  • I know there are many many posts on this problem, and I think I've tried all the suggestions on how to solve the problem, but they do not work for me.
  • PLEASE HELP ME!  I need my computer for my college work.  I can't borrow laptop my friend forever!

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.