module of Windows install is to stop and does not immediately once I turn on the computer

Similar Questions

• Windows Vista Home Premium does not start when I turn on the computer. Ctrl alt del does not work

  Windows Vista premium edition hung up in judgment and now I can't get windows to boot at all.  I just get a blue screen that says Windows Vista.  What should do?

  Hello

  You are able to access the menu start pressing F8 as soon as the initial POST ends and before Windows starts to load? If so, try the last known good configuration. Otherwise, follow the steps here to load the recovery environment: http://support.microsoft.com/kb/927525 and then run rstrui.exe to load the system restore. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• I have already installed creative cloud and illustrator (trial) but when I turn on the computer and restart windows, it fails with error code 16 and need me to remove the program, and reinstall.

  I have already installed creative cloud and illustrator (trial) but when I turn on the computer and restart windows, it fails with error code 16 and need me to remove the program, and reinstall.

  Need help.

  Hello

  Please see the link below.

  Configuration error. CC, CS

  Hope this will help you.

  Kind regards

  Hervé Khare

• Printer not print indicating the print spooler is stopped and does not restart

  Original title: printer does not print

  The print spooler is stopped and does not restart. I have a laptop with Windows 7 and the printer is a HP Officejet 8600 (network). My wife has the same laptop model and has no problem with printing. Any help you can give would be welcome.

  David Torres

  Hi David,

  Thanks for posting your question in the Microsoft Community.

  I understand that this printer not print indicating the print spooler is stopped and does not restart. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  . Have you made any recent hardware or software changes to your computer before the show?

  Please follow the methods and mark the question below:

  Method 1:

  Step 1:

  Run the Microsoft Fix It from the link below.

  Diagnose and automatically fix problems printing and printer:

  http://support.Microsoft.com/mats/printing_problems/

  Step 2:

  Follow the steps in the link below.

  Printer in Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  You need to check if the Printer Spooler service is started from services.msc.

  a. click Start, click run, type services.msc.
  b. double-click the print spooler and verify that the status is set as Automatic or Manual.

  c. right-click on print spooler and click restart.

  Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

  I followed method 2 above. When I Rt click Spooler printer restart remained gray when I click on START, I get the message "Windows failed to start the service on local computer print spooler.   ERROR 1053 the service did not demand launch or timely control.
  What can I please?

• Once I turned on the computer I got the following message: Windows could not start because the following file is missing or damaged. System32\Drivers\Ntfs.sys

  I just download Microsoft Office 2010 Professional and then turns off the computer with XP operating system. Once I turned on the computer I got the following message:

  Windows could not start because the following file is missing or damaged;

  System32\Drivers\Ntfs.sys

  You can try to repair this file by starting Windows Setup using the original Setup CD

  Select 'r' in the first screen to start repair.

  Then, I started the computer with the Original installation CD and press 'r' by following the instructions. Then, I received this message:

  1: C:\WINDOWS

  Which Windows installation you want to connect?

  (to cancel, press enter)

  What do I put here?

  You must first start on doing something so USB drive a bootable Hiren.

  Here's how:

  I'll recommend you use Hiren boot CD (it will go also to a flash/USB stick/USB).

  It's good for you, because there a lot of tools more on that on the Recovery Console CD of XP, doesn't your administrator passwords and you will not have to futz round in your BIOS, if any afflicted system has SATA drives - Hiren can deal with this.

  You will have a bunch of great tools that you have in XP... Recovery Console an editor of the register, adjustable password and an office that resembles Windows XP so you will feel comfortable flexibility.

  You can easily copy your personal data (documents, pictures, music) to an external drive.

  A system of work, start by downloading the latest version on Hiren Boot CD from here (it is a substantial download but worth it):
  http://www.hirensbootcd.org/download/    (look to the bottom of the page).

  Unzip the Hiren to a folder where you can find it.  There's a Hiren. BootCD.15.x.iso that you have to then.

  Hiren was instructed to make a bootable USB drive that you can use, but it takes you first burn the .iso to a CD image file and a few other measures, so I suggest another way and here's how:

  Download RUFUS 1.3.2 or whatever the latest version is here (read a few things on the page so you can learn more on this subject):

  http://Rufus.AKEO.IE/

  I will warn to be careful that don't accidentally format you a hard disk - don't forget your USB key is in and know what the drive letter!  This part makes me still a little nervous, so be careful.

  Launch of RUFUS and all default values should be fine for the device, choose letter of your USB drive, quick tag format FAT32, it if you want and in the Format options box, click on the little icon that looks like a CD and a window will open.  Navigate through this dialogue to point to the folder that contains the Hiren. BootCD.15.x.iso that you have unpacked above and the box should change to say the image ISO (RUFUS includes the Hiren ISO file).

  Double check you have the right device selected in the top (NOT you HDD) click Start, acknowledge receipt of the warning and let it finish (it will take a little time) it copies the files.   Hiren ISO is also a good size.

  When RUFUS is finished, it will say "DONE" at the bottom.

  Put the USB in the afflicted machine and reset/reboot and regardless of the button you press to get a boot menu where you can select the USB drive as first boot device (it's F11 for me).  If you do not see a start menu choice, you will need to set your BIOS to boot from USB first instead of the HARD disk.

  When the Hiren menu displays, choose the XP Mode of Mini and it will start loading (slowly from a USB key) and finally, you should see a windowsy looking for office.  You should recognize the part and feel uncomfortable, but it is not your office - the office of the Hiren!

  Remember: you do not start on your hard drive, - you started in the Office of the Hiren.

  A way to check the drive for errors is to open my computer and right-click on your afflicted player and choose Properties, tools, error, check checking now... put a check mark in the boxes and then start.

  Sometimes that works, then you can also click on start, run and in the type box:

  cmd

  Click OK to open a command prompt window and enter the following command (assuming that XP is installed on your C drive)

  CHKDSK c: /r

  This disk check can last a long time (perhaps several to several hours) depending on the size of the volume, the amount of data on the volume and what the disk check finds to do.  You may need to run more than once.

• How can I get rid of a small white rectangle that stays on my screen and it also does not allow me to turn off my computer?

  How can I get rid of a small white rectangle that stays on my screen and it also does not allow me to turn off my computer?

  Hello

  1. Since when are you facing this problem?

  2. have there recent changes or updates made on your computer?

  3. do you get an error message?

  4. what happens when you try to shut down the computer?

  5. What is the small white rectangle you speak?

  Method 1:

  Step 1:

  Try restarting your computer in safe mode and check if the problem persists.

  If it works fine in safe mode try performing a clean boot in order to find the cause root.

  Step 2:

  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

  Method 2:

  Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• I have problems with the shopify widget in Muse. I have configured my shopify store, but when I placed the button 'buy' is didn't tell the product no availabe longer and does not appear when I'm writing the site.

  I have problems with the shopify widget in Muse. I have configured my shopify store, but when I placed the button 'buy' is didn't tell the product no availabe longer and does not appear when I'm writing the site.

  Please contact the original publisher of the widget.

  Thank you

  Sanjit

• DELL Inspiron N5110 does not stop and does not wake from sleep

  Hello.

  I have Dell Inspiron N5110, who cannot stop it in Windows 7 or Ubuntu Linux. Specifically, I started Ubuntu Live from CD to eliminate the possibility that the problem is in Windows 7. Stop in Ubuntu does not work either. This proves that the reason for not an application in Windows that remains suspended and does not allow the laptop to close.

  The laptop computer may not wake after sleep or either Hibernate.

  I tried all the solutions that advised you to all the other people in the forum who have the same problem.

  1. the laptop cannot stop mode safe either.

  2 may not stop even after clean boot Mode - all services disabled and all package disabled Startups.

  3. I haven't tried to change the Power Options Advanced "Allow hybrid sleep" - both WE "On AC Power" and "Battery operated" - no change.

  4. I tried to install the latest NVIDIA video drivers. This did not help either.

  5 running only on battery change nothing - not cannot always stop.

  6 race only on AC adapter without battery - still cannot stop.

  7. I tried to remove the AC adapter and the battery, and now the POWER button for 30 seconds to RESET the phone - did not work.

  ATTENTION: I have read your forums all day and has seen at least 10-15 reports on the same problem, and not a single case fixed.

  8. This is why I have not tried Flash the BIOS with the latest version - I have read other people who have tried and it didn't work either.

  9. I loaded the BIOS default settings (F9) - stop still can't.

  NOTE: Change something in the BIOS and getting out once caused the laptop to freeze and I had to power off by holding button for a longer time.

  10. I ran DELL Diagnostics menu Boot (F12 at startup) - no error found.

  11. I couldn't find IEEE 1394 adapter in Device Manager to change the power management settings.

  In fact, none of the suggestions that you can give to change something in Windows is logical because I already mentioned that stop in Ubuntu does not work or the other.

  The question seems to be either in BIOS or a hardware problem. But which component? This is the CD/DVD drive?

  It is a new laptop.

  Please advice how to proceed. If you know which component fails please tell me.

  Remove the keyboard and palmrest (dell guide shows you how) and you should see a small button battery. Remove it at least 10 seconds, then put back. Enter the BIOS and make sure that there is nothing weird was changed. It should work fine now. I had this work in Ubuntu 12.04 these last days with no problems.

• USB-6009 DAQmx meter task stops and does not restart when you restart the VI

  I have the task of counter DAQmx which "hangs up" while troubleshooting a VI and does not restart when I restart Traoré.  See attached fragment VI.  The counter works reliably in normal operation, but some combinations of interruption and running "highlighted" causes to stop work.  It's in LabVIEW 2009.

  It will restart if I close the VI and reopen it.  However, this causes losing me my window probe laboriously built with ten

  the probes.

  Is it possible to re - initialize a DAQmx task without closing the VI?

  This significantly slows the troubleshooting.

  As an alternative, if anyone can suggest a way to preserve a probe Watch window after closing of associated VI, it would be a work around.

  Please do not take into account.

  Counteract the work of task - it's the rest of the program which is hung up.

• I can't get adobe to work and when I look in ms confing is shows that it is stopped and does not work how can I run past

  i cant get adobe flash player to work and when I look in ms confing is shows that he is arrested and does not work how can I change to run again

  Hello

  This can help you:

  Download and run the Flash Player uninstaller program.

  http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

  Then download and install Flash Player; After unchecking installing Chrome and Google toolbar option:

  http://get.Adobe.com/flashplayer/?promoid=BUIGP

  If the problem persists, you may want to ask in the Forums of community Flash Player:

  http://forums.Adobe.com/community/flashplayer

  See you soon.

• Windows 7 HP is responsible and can run for 2-3 minutes then the computer crashes and returns to the startup program

  After opening windows computer HP 7 is loaded and can run for 2-3 minutes then the computer hangs and goes to the startup program. However, in safe mode, it remains open without any problems. Recently, the only problem I've had is that the MSN server is not running and has been replaced by BABYLON, who refuses to uninstall itself. I system restored to all the possible dates and problem remains. Can anyone help please

  Scan with these two free tools

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  http://www.Malwarebytes.org/products/malwarebytes_free/

  What anti virus or third-party maintenance utilities have installed?

• My windows 7 hangs at startup and does not update microsoft isatap adapt #5.

  I use lenovo v570. Windows 7 just hangs up on start. IM using safe mode now. but when I check the drivers, the microsoft isatap #5 adapter has a yellow exclamation point and does not update. What should do? Help, please.

  Hello

  It's the Microsof Pnrtie on "Microsoft ISATAP adapter"

  "On a Windows Vista-based computer or on a computer Windows Server 2008, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message"

  http://support.Microsoft.com/kb/932520

  See you soon.

• Scanner does not work for all users on the computer Windows 7

  Photosmart 7510 Scanner does not work.  My scanner has the habit of work.   Now it does not for one of the three users on my Windows 7 desktop.

  I spent over 3 hours on the phone with HP.   They had me restart the computer, Plug and unplug the printer, reinstall the software twice under different names. The software depending on what user id, it is installed under allows access to the scanner/printer to one or more users.  The scanner works with Windows Paint software for all three nicknames.

  HP response is that some user control prevents the scanner software, who used to work on all three nicknames on the computer, which now works on one or more of the users.  They couldn't tell me which user control need changing.

  The HP solution is to restore my system when I could scan for all users of three.   I don't want to do that.   Does anyone have a better solution?

  The real problem is HP error messages.   When I click on scan a document, there is no answer.  Nothing happened.

  Then I tried to scan using Windows Fax and Scan.   I got an error message which helped me locate the source of the error.   I was able to fix the problem without creating a new user account.  I had deleted bu error the file MY Document.   Restore this file fixes the problem.

• CD/dvd drive does not work - it is recognized when the computer starts, and it is listed in the Device Manager?

  I am running Vista Home Premium on a laptop Compaq Presario F700. It is listed in the list of computers of readers, it is listed in Device Manager. The lites drive that the computer boots so I know it is detected. When you run itunes or media player the player does not open. When I push the drive button it will not open. It opens with a paperclip in the exit hole. It cannot read a CD or a DVD. None of the media players even recognize there is a disc in the drive. I tried to run fixit, but it would not drive either. I tried restoring from a previous backup, without change.

  Hello

  Check / settings (BIOS/CMOS) often F2 so watch the screen as it starts - place CD/DVD
  1st in the boot order (remember to put it at the time where the fact).

  Then put in a DVD to boot Windows and see if the driver works.

  If it doesn't then it's a hardware problem.

  =======================================

  If the drive has worked in the test above, that these can help:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• My photo jitters folder and does not respond when I click on the maximize button...

  Hi, I have a problem with the MY PICTURES folder in windows 7, it opens and I can get to all my files but when I want to use the maximize on the upper right button it reduced to a very narrow waist and jitters like crazy, then MY PICTURES folder does not. I have to close the program to get back in it. Any help would be apreciated. Thank you.

  Visit the Web site of factory for the video card driver updates,

  Usually in the support section.

  F11 key is a better alternative, any mouse not necessary.