Turn the GPS and MapPoint

Similar Questions

• GPS on SW3 seems only Lock when I turn the GPS on my phone! (Note 2)

  Hello

  Only, I decided to jump on the bandwagon of smartwatch due to the external GPS in the SW3.  So, I bought the SW3 less than a week ago.  I intend to leave my phone (Note 2) at home during the race, but it seems that I can't do it again!  I bought the watch of VerizonWireless and only have less than two weeks return it if there is a problem with the GPS on my watch.

  I was doing some GPS 'tests' by starting GhostRacer and then...  (1) removing my watch during a night without clouds for more than 15 minutes and the GPS was always "looking."  (2) I walked my dead end a few times.  Always "in search".  (3) I had a crazy idea to turn the GPS on my phone.  Wow!  Almost immediately, the GPS on the watch will display 4 bars, then locked with 3 bars.  I continued to walk and GhostRacer started showing I was moving a distance and speed greater than 0.0.  Great!  Maybe just needs to use the GPS on my phone to lock the watch?  I turned off my phone GPS and continued on foot.  The distance and the stopped rate of increment.  I turned on my phone back GPS and the watch started to increase my distance again.  I kept turning off GPS on my phone and I found that the watch only really felt my movement when the GPS on my phone is turned on.  Before that, I tried RunKeeper and he always showed my distance to 0.0.

  If I need to have the watch uses the GPS on my phone, then it is not necessary to obtain this particular smartwatch!

  Is there something special I should do to "activate" the GPS of my watch?  Is there a special mode that I can run in to see how many satellites that my watch can pick up and, possibly, the strength of the signal?  I have not been able to find too many messages on the Internet on the GPS doesn't work don't not with execution of applications, so I wonder if there is something wrong with my particular watch, but I won't be able to prove that first.

  Here are some details:

  PWP

  Location: on

  Flight mode: Off

  Android wear: 1.0.5.1785466

  Note 2 phone

  GPS: Off (unless I'm trying to make my GPS watch to work!)

  Any help would be appreciated!  Thank you!

  Disconnect the phone from your watch and try again. Disconnection = go away or turn off BT on your phone.

  If your watch is connected with your phone, then the phone GPS and GPS settings have priority. Turning off the GPS on your phone means you want to use the location services.

• I bought a used A1283. The screen is barely visible, and when I turn the monitor and it is clear for a 1/4 second then barely ther?

  I just bought a used A1283.  I took it to Best Buy to see if they could make me the administrator.  They said that having seen lines vertically on 'their' screen and on mine as well.  I never noticed at home only matter of freezing.  They said that the graphics card is out?  Now I have a scren for a millisecond until it's so dark I can barely read.  When I turned off the moniter and then it's clear just for a millisecond, then dark?  Help?

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  Subject of memory NVRAM and PRAM

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  If no recovery (this is Lion or later) them start from the installation DVD instead

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  Or the installation DVD or Lion or later

  However, I suspect a bad graphics unit. The graphics unit is soldered to the logic board and is not replaceable.

• Simulate the GPS and the accelerometer?

  Don't/does the Simulator to simulate coordinates GPS (direction, speed, etc.) and the accelerometer?  I know that VMWare will be not able to do it, but another method?  Yet another application in developer mode that can run a script to simulate some actions (ala XML)?

  Little a chicken or the egg situation were there are people who want to deliver these applications before the product launch, but would need a product to develop and test their applications.

  We will call this "Most Wanted Features in Simulator" thread, I'm dreaming of touching and sliding events.

• Tap the screen stops functioning, turn the phone and the

  more and more frequently the touchscreen lost all sensitivity, even rebooting is difficult because the power off of the blade does not

  To make sure that it is not software related, set it back to factory settings, without using any data backup later. Set up the rest of the personal settings manually and test the phone.

  If the phone works again, restore the last backup. If the problem returns, the data backup contains damaged data, causing your issues.

  If it still does not respond, it is a hardware problem and the phone must be repaired by Apple or an Apple authorized Service Provider:

  Use iTunes to restore your device to factory settings - Support Apple iOS

  Find an Apple authorized service provider

  Apple iPhone - contact Support - support

• How to force the Photos up-to-date original jpeg file after you have added the GPS data and rotation

  Hello

  Pictures has the ability to add GPS data to an image file, but stores the GPS data in a catalog instead of the actual image file.  The same seems to apply to the rotation of the image.  Is there a way to force the Photos up-to-date the actual image file?

  The only solution I have found so far is to export images updated, remove them from the library of Photos and re - import.  This process, however, replaces the original creation date with the date of the export in the file.  (i.e. a photo taken in 2007 with a creation date of 2007 will now have the date it has been exported photos as a creation date.)

  The reason why I want to update the original file, it is that I use Google Photos automatically create albums using the content of the image, the GPS data and dates.  The backup utility Google downloads the file Master Original therefore excludes files and changes to images in the photos.

  I use the photo Version 1.5 (370.42.0)

  Thank you.

  The same seems to apply to the rotation of the image.  Is there a way to force the Photos up-to-date the actual image file?

  No, Photos will never alter the original image file.

  You can export the photo with the GPS and reimport with file > export and activate "include location information:

  

  Or use a tool to add location data before importing photos to Photos. I use Jetphoto Studio.

• Problems with the GPS unit connection

  I have a Garmin Nuvi 650 GPS device.

  If Windows is at the front and I plug my GPS using the USB cord, the GPS is displayed on my Mac desktop.

  If I go to Fusion > Virtual Machine, the mouse down to USB I can mouse horizontally to highlight the GPS and can then process in Windows.

  However, as the Garmin is recognized by Windows, it disappears from the Mac desktop computer and I get the alert that a device has been incorrectly removed and may be damaged.

  In what order should I do so that the GPS is "captured" by Windows and never appears on the Mac desktop?

  BTW, when I'm done with the GPS in Windows and unplug it, it reappears again on the Mac desktop.

  Thank you

  
  
  Biker Bob

  VMware Fusion 2.0.1

  Windows XP SP3

  OS 10.5.6

  --

  __o

  _ \ < _

  ()/()

  It all seems normal and expected. You can get get the unit appears directly in the comments by turning on auto-connect USB (which is enabled by default, but doesn't seem to be in your case) and connect the nuvi when the virtual machine Windows has focus. Alternatively, to avoid the warning of OS X, you can eject the nüvi to OS X before connecting it to the guest.

• The GPS data with other analyzed data record

  Hello!

  I am a new user of DASYLab and not very good with coding, so please bear with me! I try to record (timestamp, latitude, longitude) already analysed GPS data with other data (accelerometer, etc.) in the same. DDF file. Right, GPS analysed is now sent through a series of three demultiplexers for each signal and only 1 of 16 channels, reducing the size of the output data. This data is then saved in a. The CAD file. Other data on average, recorded in one. DDF file, then saved another. The CAD file. We used to compare the data from the GPS and other devices by comparing timestamps.

  I would like to save all data to a file, either. DDF of. CSA (.) DDF would be preferable).

  When I try to add more channels in the. DDF save the module after the demultiplexer black box and GPS data to it, I get an error saying "the data to an entry in this module are the wrong type." I also receive this error when trying to send the data GPS to the. CSA Save module. I learned that this means that the size of the files is not the same of this thread. My question is, how can I make sure that the data have the same characteristics of time so I can save to the same file?

  If you need more information I would be happy to provide it, I apologize if I have something important to go.

  Thanks for reading,

  etdiv

  That's what I needed. Your time is the driver. In the RS232 input module, click the Options button.

  Select the measurement of output value, and then click the button on the time Base and select sync/time Base driver.

  That should allow you to write to the DDF file.

  

• Stop the timer and a link button to stop the timer

  the problem is the timer will work kick to the end every time I turn the knob and how could I stop time and the timer control. Also, how would I link the operational (Wash, Rinse, Spin, Soak) and the water level to set the timer?

  In your code, pause feature does not include the implementation of the timer.

  Try the timer attached, I did while practicing in the review of the CLD, it's PAUSE feature.

• Display the date and time on the taskbar

  I just upgraded to Vista Premium 64 for Windows 7 Professional as well as the date and the time in the taskbar display became static at 07:25 08/01/2010. When I turn the date and time of the show, but I can't find a way to display the correct information on the taskbar.

  Hi geoffinbaja,

  It seems that some application or service is in conflict. To narrow down on the boot of the issue of the computer toboot and check if the issue still persists. Link below will help you to start the computer in clean boot:http://support.microsoft.com/kb/929135

  If the problem does not persist, you can continue with step 2 from the link above.

  Make sure that you reset the computer in normal mode in step 7.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The mouse and the keyboard does not while playing the Tekkit game.

  Original title: mouse and keyboard on windows 7 pro

  When I try and play tekkit my mouse and keyboard stop working so I turned off my computer, and then turn the mouse and keyboard work until I try to replay tekkit

  I bought a new mouse and keyboard and it happens again can someone help me please

  tekkit's minecraft with mods

  Hi William,.

  Thanks for posting your query in the Microsoft Community Forums.

  I understand the inconvenience you encounter playing the Tekkit game. We are here to help and solve your problem.

  Follow the suggestions below and check if this can help:

  Method 1: Try to uninstall and reinstall the latest version of the game:

  How to uninstall, change a program:

  http://Windows.Microsoft.com/en-us/Windows/uninstall-change-program#uninstall-change-program=Windows-7

  After you have uninstalled the game, download the latest version of the game from the link below: http://www.technicpack.net/download/

   

  Method 2:

  If the problem persists, place the computer in a clean boot State and check.

  Try to boot into safe - mode Run your computer in safe mode and see if you still get this error message. If you do not get this error message/question in safe mode then run the clean boot on your computer by following the steps below. If you do not receive this message/question of error in safe mode, this means that a third-party application is causing the problem.

  To use the Safe Mode option, follow these steps:

  1. reboot your computer and start pressing the F8 key on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the key F8 when the Boot Menu appears.

  2. Select an option using the arrow keys on the keyboard when the Windows Advanced Options menu appears, and press ENTER.

  You can place the computer in a clean boot State and check the issue.

  Clean boot: To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to perform a clean boot for a problem in Windows 8, Windows 7, or Windows Vista

  http://support.Microsoft.com/kb/929135

  Note: Please refer to the section: How to reset the computer to start as usual after a clean boot troubleshooting section of Kb to start the computer to a normal startup after you fix the problem.

  Try the step above and tell us if it helps. For assistance feel free to post your questions in the Microsoft forums. We will be happy to help you.

  Thank you.

• HP laserjet 1022 does not wait for the user to turn the pages when printing double-sided

  My Hp laserjet 1022 printer working properly for years.

  So far, when he executed more paper he tried a couple of times to get more paper and then stops with a message on the PC it is out of paper.

  Very annoyingly, this has changed recently, now when it is out of paper, he tries a couple of times to get more paper and watch the message on the PC, saying that it is paper and then again, try a couple of times to get more paper and again shows the same message on the PC and him back... This continues to go on and on.

  It's especially annoying when trying to print double-sided. Before he used to stop and ask you to turn the pages to print the other side. Now the previous behavior overrides the break to turn the pages and keeps it will try to get more paper. As now, it does not wait for the user to turn the pages, in general it spoils the impression out by getting another paper that is not what I wanted, he drives me crazy! It's really hard to print anything double face now.

  All solutions?

  Operating system is Windows 7, I just downloaded and installed the latest driver for this printer "2013-01-09, Version: 20120918" and I get the same behavior. In the properties of the printer that I put some State Messages to Off and at least I don't get the full windows message screen poping up every time the printer is trying again to get more paper. I have not found all the other parameters that may affect this behavior.

  Help!

  Hello

  I solved the problem! I found the original CD for the printer. I uninstall the current driver and then install CD and now when the printer is out of paper trying to get paper a couple of times and then stops, as it used to be.

  Thanks for your help.

  Martin

• iPhone 4S heating quickly, turn off the power and the battery drains quickly.

  Hello

  My problem is exactly the same as the title. My iPhone 4S warms up quickly, turn it off and after I turn the iPhone, the battery drains quickly and the iPhone will turn off after 5 minutes. iPhone turns off again and again until I put the iPhone on the charger. It is bad because I like to play games like Pokémon GO. But after 10 minutes of play, the iPhone starts heating (and of course delay).

  Things I've tried: (and didn't work)

  The apps I use no fence. (I close applications once I stop playing)

  Turn off location Services. (Enabled only when I'm with apps like GPS...)

  Reduce the brightness

  I will be grateful for any kind of help.

  Welcome to Apple Support communities, Krystof11cze.

  It seems that you encounter problems with your iPhone 4S on iOS 9.2.1 with heating, battery draining and stopping. Good job on the steps you tried as I would have recommended those as well. I will do my best to help!

  1. backup of your iOS device - because I have erase you your iPhone completely, it is strongly recommended that you will lose your data if you do not.

  2. restore your device to factory settings - using the settings on your iPhone will only erase your personal data. You will need to let iTunes erase the iOS version installed a new clean copy can take place.

  3 test the question - the first time through, set up your iPhone as a new iPhone when it asks. It's just temporary. You can connect to iTunes and App Store and iCloud and also download some of your applications. Test for problems you encounter. If your iPhone's battery life is improved, follow the next step.

  4. restore your iPhone, iPad or iPod touch from a backup

  Take care!

• Turn on the GPS

  I searched the forums for a way to turn on GPS programmatically.

  Useful results, I found, the answer is no, this cannot be done, however, it was a year ago.

  Does anyone know if it is possible now and could tell me a few API / code?

  Thank you

  It is not possible.

  I would like to add a pop-up dialog box indicating the users GPS must be turned on.

  If not I belive it would be possible to make a BES IT policy to manage the users settings, but not sure about this one.

• Requirements: background app, launch during the phone starts, GPS and GPRS notifications

  Hello

  I am preparing for my first application development for
  BB. This application must have access to the network as well as
  access to the GPS integrated perfectly without any notification of the
  user, or later as a notification during the installation phase. Is it
  something can do BB? Please could indicate a documentation on this subject?

  Other requirements I would check first if they are possible reach in BB:

  1. the present application must be running in the background.

  2. the application must be started when the phone starts (so works as a service).

  3. it must be possible to receive and read SMS (perfectly using the dedicated port number, do not use standard Inbox).

  All these conditions are possible to realize on the BB? Could you please indicate documentation (or keywords)?

  Thank you and best regards,
  Marcin

  Yes, what you describe is possible.  I recommend having a look at the documentation available here: http://na.blackberry.com/eng/support/docs/subcategories/?userType=21&category=BlackBerry+Java+Applic...

  Here are a few articles aimed specifically at your questions.

  1

  How - to create a background Application
  Article number: DB-00005

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800660/How_To _...

  2.

  How to-configure an application automatically starts when the unit is turned on
  Article number: DB-00002

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800901/How_To_-_Confi...

  3. also refer to the smsdemo provided with the BlackBerry JDE for this point.

  What - in different ways to listen to SMS messages
  Article number: DB-00579

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800563/What_Is...