Tap the screen stops functioning, turn the phone and the

Similar Questions

• Reagent with breakpoint. When I turn my phone and read in the longitudinal direction, the phone opens the next breakpoint, not nice with a youtube link and the solution?

  I want to force the design to stay in the same breakpoint, when I turn the meaning of reading on a phone. Someone at - he found a solution to this? A youtube video does not read it ok...

  And when I come back, it does not display...

  Thanks Jacob

  Se this example page on a phone, kuhu doing video work with breakpoints, you can block a breakpoint I?

  Everyone, how to solve this problem?

  http://www.thesander.dk/responsive5/

• Blue screen STOP error: 0 x 00000050 [0xE4489414 0 x 00000001 0x8054BFD2 0x00000001]

  First of all, I got the blue screen error a few days ago. I left my computer and works fine while I went to school, when I got home, it rebooted and frozen to the diagnosis of the BIOS screen. I turn it off and restarted again, and before windows could load up, he got a bluescreen and restarted. Once more, he froze in the diagnosis of the BIOS screen. I didn't know what was going on, so I unplugged my computer and reset the BIOS by removing the battery, and it put it back again. Then I plugged in the computer and it starts. It loaded windows, and I logged on. Windows has worked for about 10 minutes before he got another blue screen of the same type. The screen flashed by too fast for me to read. He said something about 'Memory error'.

  I tried to restart the computer, and he hung up on the screen of the BIOS again, so I reset the BIOS again and was able to open a windows session. I thought I might have a virus, so I start Microsoft Security Essentials and started a full analysis. 5 minutes later, I got the blue screen again. After this third blue screen, nothing I tried would let me connect you. I have reset the BIOS again, tried the last known good configuration (which has worked for 3 minutes) and I tried to start in safe mode. Nothing has worked. Finally I said a few expletives, re-formated my HARD drive and reinstalled windows Xp. It worked well until everything has been done, and when everything was finally set up and running, 20 minutes later I got the blue screen again. I gave up and left the computer to sit for a day, while I thought about what to do. Last night, I turned on it and hey presto, it works again.

  It worked for about 6 hours, then I disconnected and close. This afternoon I turned it on and it worked for about 2 hours, then I got a new Blue error screen. This time, the error remained on the screen long enough for me to write:

  STOP: 0 X 00000050 [0XE4489414 0X00000001 0X8054BFD2 0X00000001]

  PAGE_FAULT_IN_NONPAGED_AREA

  He made a memory dump, and then rebooted normally. To log in again, I got this:

  System has recovered from a serious error:

  BCCode: 1000008e BCP1: C0000005 BCP2: BF8B173F BCP3: B3BE4C3C BCP4: 00000000 OSVer: 5_1_2600 SP:3_0 product: 768_1

  He asked me to send an error report, so I sent off the coast, including the info dump and system memory. So far, I've been connected for about 45 minutes now without any problems. I had previously looked up the error memory and found a bunch of answers that don't really solve my problem. I have installed new equipment last year and the 4 GB of RAM I have in my system is much more than I ever use. I looked at the papers in computer management and found only an error, but it's because after I reformatted my computer, all the previous 'memory' error logs are now gone. Looking at the logs, I also found this error which has repeated every time my computer starts:

  AMLI: ACPI BIOS is trying to create an illegal memory OpRegion, starting to address 0xaabbccdd with a length of 0 x 400. This region is located in the operating system's protected memory address range (0x100000 - 0xdfedf800). This could lead to instability of the system. For technical assistance, please contact your system provider.

  I don't know if this error is related to my other problems or not. The strange thing about all this, is that these problems only suddenly came with none of these errors that occur before about 3 days ago. I also noticed undeclared my CD-Rom has a bad block of memory. I don't know why this product is no longer, because I bought brand new CD a year ago and have any errors with it so far.

  I don't really know what is happening, but I intend to test my RAM and buy a new key if none of them produce the 'memory error' once again, but so far, the computer is running somewhat normally, which is better than nothing. Any advice you have would be great.

  Thanks for your time,

  SLIM

  Much better and you are doing very well.

  Your video driver looks good, your sound is a bit out of date (the latest from Realtek is 5.10.0.6194).

  See the Readme for Realtek from here and see that the most recent driver is 5.10.0.6194, but if it was what he usually come in BSV.

  http://www.Realtek.com./downloads/downloadsView.aspx?langid=1&PNid=14&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  You can check your NVIDIA drivers on the NVIDIA website:

  I use the NVIDIA site and let their scanner online take a look at your video card and see what he suggests for drivers and consider their analysis if they offer a new driver.

  It is recommended to run the scan NVIDIA with Internet Explorer.

  Here is the address of the NVIDIA page:

  http://www.nvidia.com/download/Prescan.aspx?lang=en-us

  Read the instructions, and then click the GRAPHICS DRIVERS button to start the scan.

  I'd do the RAM test, and since you have a genuine XP bootable installation CD, you can start it and choose to enter the Recovery Console and run chkdsk/r as follows:

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same thing you see in the Explorer folder C:\WINDOWS.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the command prompt.

  Start by checking the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  If you get a BSOD, we look deeper into the crash dump files which mean you must download this file "skydrive" share the thing they have here.  If you wish, you can go ahead and download the latest files from 5 dump for the practice.  I need practice too since I'm not a skydriver.  BSV has the information in pink in the lower pane of the form, but it is not in the general report.  Sometimes it NLY shows XP files in the upper part and there is probably nothing wrong with them.

  http://windowslive.com/online/SkyDrive

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• IPhone 5 s screen does not turn off when it is plugged in to the charger.

  Hi all

  I use Iphone 5s from the last 4 months. Recently I came across this situation. Sometimes I see screen only turns off when its plugged into the charger. After a few hours of mobile will be turned off. Sometimes I manually press the power button to turn off the screen.

  Please let me know how to solve the problem.

  Kind regards

  Manju!

  Hello there, Manjunath K P!

  Thank you for joining the communities Support from Apple! Looks like you're having a problem getting the phone to automatic locking. I know that I want my iPhone did not stay when over and have the screen lock correctly. You can, of course, that your Auto-Lock is set up correctly. Your range of choice of automatic locking from 30 seconds to 5 minutes before locking the screen, or you can choose never so that it does not lock. To change the settings, tap the settings icon, click the general button. Tap the AutoLock option and choose your preference.

  If these steps do not work, and you still do not see the iPhone Autolock when you're in charge, you can go to settings > general > reset and then press reset all settings. This removes all the data. For example, if you have 16GB of music, videos and photos, this option will not remove. What this does is actually reset some of your settings to factory default. It is not a complete withdrawal of the parameters. It deletes all of your preferences for Wi - Fi, Bluetooth, do not disturb, Notifications, general, sounds, brightness & wallpaper and privacy.

  Once that is done, go ahead and try to set the automatic lock again and see if it works.

  See you soon!

• My iPhone 4S is sensitive to my computer and turn on siri, however the screen does not turn

  I have an iphone 4S with the newest ios (as of December 4, 2015). It was connected to a laptop (not a mac) to recharge when the laptop and the phone have both froze. The laptop has rebooted while the phone was still plugged. The laptop is fine, but the phone never turned back. It is always sensitive when I plug it into the computer laptop and if I hold down the home button.

  • So far, I have tried holding down the home button and power for about 10-15 seconds.
  • Now I tried the power button down for 10 seconds
  • I had plugged into wall to charge for about 20 minutes.

  There was no change in the screen. I think it's maybe a problem with the screen, the phone was hot to the touch when the screen stopped working. Someone was playing a game on it at the time it was plugged into the laptop. I don't have a warranty of any kind on the phone.

  Would appreciate a help,

  Kind regards

  A worried user 4S

  I pressed power and the button "home" for about 20 seconds and the phone has rebooted and is back on again once.

• HP ENVY: The screen does not turn when only keyboard

  Morning,

  My laptop turns (i.e. horizontal screen) when attached to the keyboard. However, when the keyboard disconntected screen only a portrait.

  This occurred only in the last days. Until the computer was perfect.

  Cannot find the screen rotation function, need assistance as soon as possible.

  Happy new year and thank you very much.

  RA

  To set the locking of autorotation of your Tablet:
  1. drag the right edge of the TouchPad or touch the screen to display the charms and then press
  Parameters.
  2. tap on the icon in the bottom right of the screen. Tap the autorotation lock icon to lock your current Tablet
  screen in place and to prevent rotation. The icon displays a lock symbol when the autorotation locking is
  active. To disable the locking of the autorotation, tap the autorotation again locking.

• Unable to turn your phone, what happens to the images in lightroom app?

  Hello

  I used the lightroom app for editing photos on my iphone 6. My iPhone randomly turned off and won't turn back on, well it is, but the backlight does not work, and now Apple is said he had liquid damage so they are unable to solve the problem and I have to get a new phone. Normally I save photos of the iCloud, but unfortunately I ran out of storage so it has not argued for about 2 months. I didn't know that I had not implemented an Adobe account and was just send pictures on the application and save them in my camera. I was wondering if it is possible to access these photos always? Quite disappointed for having lost so much so tried every avenue to get back them.

  Thanks in advance,

  Sarah

  Without an Adobe account your images will not have been synchronized to the cloud. They will not be on the device.

  If its purely a screen display function/problem connect the phone to a Mac and launch the Image Capture. you will then be able to download all the images currently in the film.

  If you have more images not in the film, you will need another application. I recommend Phoneview. Although it recover all your images in the iPhone camera it will not reach in images in the Lightroom application. Or any other application of the Image.

• Tecra 9000 - no display on the LCD screen when you turn on

  I recently got a Tecra 9000 for cheap on eBay. I am experienced with the construction and repair of computers, but not so with laptops.

  The problem with this laptop, it's that do not display on the LCD screen when you turn on. It was just black, no backlight, nothing. I took the laptop all share, found no obvious problem. I had to turn it on and the screen lights up a few times trying to figure out the problem. Would it be a bad connection? Or something else?

  After getting it to start work, I'll try to start to put it back together and it stopped working again. I haven't not been able to reduce it to know if it's a bad connection or a card problem.

  Someone at - it suggestions? This is a problem for others here?

  As you describe the issue, I think it is somehow a bad connection or a damaged cable, because it does not work once you have disassembled the screen.
  Maybe you need to check all the cables, leading motherboard to the LCD and take a close look, maybe for a few scratches or strong curvature.

• Satellite A210 1AP - the screen does not turn

  I had a problem about a month ago with my Toshiba Satellite A210-1AP, just that the screen did not turn. Was working on the computer, all the lights were on. The light that shows the HARD disc flickered, as usual, but with display always off. So I stop, and the next time I tried it was warking as usual, with display turned on, he asked if I want to start windows normally or in safe mode (as when it is restarted abnormally). Then worked normally for a few days, and then it happens again. At this point, I could not go to the service (computer was in warranty, and how do you prove that something happens sometimes if it happened there). So I continued to use it, and as the time past the problem was more often. So I decided to go to the service.

  Guy in the service, said that the problem is the motherboard, so he changed the motherboard and it took months for him to do, and then when I called he said that it still does not. And maybe he has change rooms, display, graphics card is perhaps a problem, that he has not seen the problem like this...

  So my question is do you know what could be the problem? And the second question is can I demand of him, because he went from 30 days to give me a new computer rather change all parties to this issue?

  Thank you
  Nikola

  Hi mate,

  It's really hard to say what causes this problem, but I think that notebok technicians do a good job and they will be committed to repair your laptop as soon as possible. Maybe they ordered some new parts, but they are not available at this time

  Theoretically, all that could be the reason of this problem FL inverter, LCD screen, motherboard, graphics card, cable, etc.

  So I think you should call the technicians still what is the current status.
  But I doubt that you can get a new laptop for free. If it of still under warranty, it will be repaired.

• Urgent: iPhone 5s boots up the white Apple logo screen, then finally turned his back on the wide...

  So, my 5s has problems with a few apps, so as I normally do, I turned the phone off and tried to turn it back on. (Phone is recharged btw, so not to die because of this)

  When I tried to turn it back on, the phone went to the start screen normal white with the logo of apple in this regard. He stayed there for 10 seconds, then the screen turns off. I continued to try to make it, but with the same result. Then I tried turning on the phone, press and hold the power and the "home" button to reset, but after resetting, it just does the same thing and turned off after having been on the screen of white boot for a few seconds.

  I followed some advice online to hold down home button after trying the reset, or press and hold the volume up button after resetting. Nothing works.

  I tried to do a variation of all the things mentioned above, when you are connected to a power outlet, did nothing.

  I tried to connect the phone to my computer with iTunes open. the phone turns on the start screen, as if acknowledging a power source, but the computer does not recognize the phone and so I can't do anything to reset the phone or do any recovery options mode... because the computer does not even recognize the phone.

  Any ideas? Apple chat will not work for some reason any. I need serious help. I have a week huge lead and need a phone. Impossible to find ideas on the internet, as mine connects to the computer and will not even appear a glimpse of life other than 10 seconds on the start screen.

  My phone got very buggy lately, by habit when you're updating to the latest version of iOS, and I think that's probably the culprit.

  NEVER interrupted or damaged my phone at all, perfectly working physically.

  Hello

  Turn off the iphone

  Make sure that your PC is running itunes 12.3.2

  Connect the USB to your PC wire

  Power button press and hold down on iphone connect to iphone power button pressed

  Until the PC sees iPhone.

  Wait for the restore, you may need to do more than once before it works.

  If you still have problems to make an appointment on apple store.

  See you soon

  Brian

• White screen when I turn on the Satellite M50

  I have intermittently just get a white screen when I turn on the computer. Usually, the problem is solved by turning off the computer and try again - but sometimes I get a white screen again.

  It seems to be linked to the use of external devices - can someone give me clear instructions on which expected/doesn't have to be connected when I start and shut down the computer? Or other suggested solutions?

  Thank you

  Hi Rachel

  Believe me; It's not easy to provide an exact solution and that's why we need to study a little ;)

  Have you checked if the graphics card driver update could solve the white screen issue?
  If not, try to download and install the latest graphics driver

  You second question on the laptop stop problems is known to me. Sometimes it happens on my laptop too. The LTCC is a part of the Norton antivirus application, which is still running in the background of the operating system.
  This strange box "close the program" might appear because this context process couldn t be closed automatically and so the operating system can not stop.

  Especially the new application installation might help you. But why don't you use Norton Antivirus? What makes the laptop very slow. I have used this app for a long time but now I use the freeware program called Antivir. Its free and in my opinion much better than the Norton Antivirus.

• Light (switch) on my screen does not turn off. I have to shut my computer down several times a day to turn off the monitor.

  Light (switch) on my screen does not turn off.  So, I shut down my computer and restart several times a day, because when I put it in mode 'sleep', he wakes to the top in a few minutes and will not fall asleep.  I could put a blanket on my screen when not in use, but I'd rather find a way to make it stay asleep when I tell him.

  Light (switch) had already done once before and I was so worried that once I turned off the monitor that I would never get it new on... a bit short of money here, to buy a new monitor, but the next day, I pressed the power button with an additional downward pressure and I could so he could start working again (able to turn the market monitor).  It was about 3 weeks ago.  Now, the light stays green, unless I stop the whole computer.

  Maybe my main problem is sleep mode, which removes the screen for like 2 minutes and then he wakes up to the top and is so rude when I myself and try to sleep, I just turn off the monitor everytime I put the computer to sleep.

  Now, I can't turn off the monitor, except by turning off the computer.

  Hi JDandGinger,

  I suggest you follow the provided article and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-power-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

  If the problem still persists contact the manufacturer of the monitor for more help and information.

• X 220 T: screen used to turn Tablet & FN + F3 after switching to the Mode will not work

  Dear community,

  as I have already mentioned in the thread title, my screen will not turn after the passage in Tablet Mode. Also FN + F3 does not either. System update shows no other edits, but he seems to be in any case, tapped since im sure that it has not installed the tablet button driver.

  I have a sweet Version of installed Windows 7, and before I start installing drivers hurt over and over again, im invite you you guys for help. Maybe you can tell me which driver I'm missing.

  All the best,

  Nik

  Installed all the drivers of the matrix-driver manually, looks like it worked. System update however was the shit...

• I bought the new iphone 6 s more and I have not configured, I just opened the phone and charged, but after some time it stop by itself, is this normal or I have a problem with my phone?

  I bought the new iphone 6 s more and I have not configured, I just opened the phone and charged, but after some time it stop by itself, is this normal or I have a problem with my phone?

  You need to activate the phone. There is nothing that the phone can not be activated.

• Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is restless))

  Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is agitated and it is not difficult to work with him because I like and what I should I do?))

  Serial number C02FD2CPDF8V