Turn the screen of the laptop in a book version.

Similar Questions

• The screen on my laptop has changed from vertical to horizonial. How do I turn vertically so I don't have to turn the laptop next to display.

  When I use my laptop now I turn the laptop on the right to read.  I just need to know how to rotate the screen back.

  Hello

  Try to press Ctrl + Alt + up ARROW, or try Ctrl + Alt + and a different key to the arrow.

  If this does not work: right-click on empty office rotation - graphics options.

• I just formatted my laptop and every time I try to intall service pack 1 for windows vista as it gets installed but when I turn the LAPTOP works again it ask me to update?

  I just formatted my laptop and every time I try to intall service pack 1 for windows vista as it gets installed but when I turn the LAPTOP works again it ask me to update? What should I do

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you here what Service Packs, if any, are already installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, first of all the installation of SP1.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  And if you have any problems:

  There is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  See you soon.

• Windows 7 when I turn the laptop it says check cable connection pxe - mof: outgoing intel pxe rom no boot device insert boot disk and press any key

  Windows 7 when I turn the laptop it says check cable connection pxe - mof: outgoing intel pxe rom no boot device insert boot disk and press any key

  Hello

   

  1. What is the brand and model of the laptop?

  2 have you made any changes to the computer before the show?

   

  Method 1:  Change the boot order in the BIOS settings:

  See the following steps:

  Important: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  (a) start on typing Dungeon either F1, F2, F10, Esc, or DEL to enter the BIOS Setup.

  Warning: some manufacturers use F10 for recovery of the system.

  (b) glance to "Drive Configuration", "Boot order" or similar

  (c) check the second drive the first boot device CD/DVD and hard drive.

  (d) to save the settings and exit.

   

  Method 2:

  Step 1: Trying to boot into safe mode and see if that helps.

  Start your computer in safe mode:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If step 1 work, try step 2

  Step 2:  A clean boot to check if startup item or services to third-party application is causing this issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: when you're done to diagnose, follow step 7 in the article to start on normal startup.

• When I turn the laptop it asks password. Then goes to a white screen with a flashing underscore

  The only thing I can think is that windows is not present on the laptop... Its also a TOSHIBA

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And if you can't fix it and having to reinstall, here is the information from Toshiba on this.

  "How restore your laptop Toshiba to its state of charge software factory using system recovery"

  https://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/bulletinDetail.jsp?soID=2737864&PF=true

  See you soon.

• Turn the page like a book - not up and down

  I need to make our catalogue of the company in an application. When I tested a part (about 30 pages) in the viewer of content on the iPad, I had scroll upward and down to go from one page to another. I need to scroll sideways like turning the page. We're going to have a vertical application. When I looked in the help and looks like I have to do 1 page per article to do this way. Please tell me this is not the case, the catalog is 280 pages.  Thanks in advance for any help you can provide.

  Ray

  Set the properties of the article to horizontal swipe only.

  Bob

• Rescue OneKey 7.0 turn the laptop system

  When Windows 7 gives the possibility to turn off the computer this leave, but after a few seconds, the computer turns on itself and takes me to Onkey Rescue System 7.0. Why is this happening? because it becomes a cycle that keeps the computer is off.

  Determined, I went to the dealer and they changed my computer because he had a manufacturing problem that prevented the closing.

• White screen on my laptop in Satellte C series

  Hello

  After turning the laptop on all I get is white screen, clues?

  I found very good answer on this forum.

  A white screen usually means that the backlight is on but no signal reaches the graphics card on the screen.

  This could have many reasons such as:

  broken-a the cable screen
  -graphics card failure
  -view controller malfunction
  -some short circuit between the graphics card and the screen

  In your situtaion I use the warranty (if still present), send the machine to the nearest available service provider and let them check the hardware on some failures...

  That's all I can tell you from my experience with white screens.

• the screen of my laptop is not proceed or turn on quickly

  Hello im from the Lebanon
  I have a compac mini hp laptop I use for projects. I have a problem turning on the laptop. Once I turn it on, it takes an hour to see the screen. So I can't do anything because it's too slow!
  Used my little cousin and I donno what happened please help me

  dimakabakibi wrote:
  Hello im from the Lebanon
  I have a compac mini hp laptop I use for projects. I have a problem turning on the laptop. Once I turn it on, it takes an hour to see the screen. So I can't do anything because it's too slow!
  Used my little cousin and I donno what happened please help me

  Looks like your cousin got infected by malware or virus as can still be seen on the screen, but it takes forever to do anything. You'll need to use the HP recovery media and wipe and rebuild the computer to solve the problem.

• The screen of my laptop turns off on its own

  My computer laptop screen turns off automatically and is very annoying.
  After a few minutes, it's just empty. I guess it crashes too I turn the caps on and outside locking button and the led lights.
  Can someone help me with this issue?

  > Can someone help me with this issue?
  How to help when we do not know what model of laptop and operating system do you use?

  Screensaver enabled or disabled?
  Do you use factory settings?
  Did you install additional software which can have an influence in all this?

  Sorry my friend, but it is not easy to discuss issues on this path.
  Either offer some relevant information or... Google. ;)

• How auto turn off the screen of the laptop when you use the external monitor?

  I don't wan turn on laptop screen and my external monitor at the same time. So is it possible to do automatic screen of my laptop to turn off as soon as I plug my external monitor to my laptop vga cable (without pressing Fn + F2 keys)?

  Please help me.

  Thank you.

  I don't know if it's possible, but you could try to go into display settings and set an external because it is main if possible display and then disable the laptop with Fn + F2 but idk if it will remain inactive if you portable computer power, then on again :/

  Update: how to do this, right-click on the screen area and select the screen resolution while having the connected external display then of you will find a drop down a 3rd or a 4th do not remember but inside, you'll find stuff like show desktop on the screen 1 or 2 to find out what your external display screen number is and apply it to this form then computer laptop screen should turn black as it is turned off and you will see desktop area is on external display so I hope that this has resolved your request.

  PS don't forget to press Bravo if it helped

• black screen when I turn on the laptop

  Last night's in trouble with the screen freezing... Help the power up to the stop button. Will not be stopped... The only thing it does is going to a black screen... However, I can move the cursor... Please help the laptop is a year old and not used all the time so its pretty new.

  Dear customer,

  Welcome to the Support Forum HP and we are happy to help you

  Looks like you are having a lot of difficulty getting on the Windows desktop, you get a white screen

  We will surely help you with this

  According to the message that you posted, I suspect that this could be due to the recent changes are applicable.

  I'd like to request you to perform the procedure to solve the problem below:

  Step 01. Turn off the computer

  Step 02. Turn on the PC and keep pressing the F8 key

  Step 03. Select "Safe Mode" in the early startup Option list

  Note: Wait until you get to the Windows desktop

  Step 05. Please remove unwanted startup items and uninstall unwanted applications

  Step 06. Please reboot / restart your PC normally

  Note: Incase if these steps don't work you can continue to troubleshoot the issue once again

  Step 01. Turn off the computer

  Step 02. Turn on the PC and keep pressing the F8 key

  Step 03. Select "Last known good configuration" in the list of the early start Option

  Note: Wait until you get to the Windows desktop

  Step 04. Please remove unwanted startup items and uninstall unwanted applications

  Step 05. Please reboot / restart your PC normally

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• My screen goes black after a short so that after starting my laptop. I plugged an additional screen now to be able to use my laptop, but the laptop screen keeps turning black shortly after. How can I fix it?

  My screen goes black after a short so that after starting my laptop. I plugged an additional screen now to be able to use my laptop, but the laptop screen keeps turning black shortly after. How can I fix it?

  Hello

  I'm sorry to say this, but it points to a UPS of material about to fail.

  You will need to bring the laptop to get it replaced.

  Slan go foill, Paul

• The screen of my laptop not turn on after being in mode 'sleep'

  Let me start by saying that I am a novice in computer repair, so advice please put in laymon's terms! My problem started a few weeks ago, when my Dell inspiron 1526 would not resume when I opened the lid of the laptop.  (I rarely have to cut the power, just close the lid) When he started to arrive, I have to cut the power and turn off several times to get my computer to come back.  I did research on the internet for a solution (because I had resorted to all leaving the lid open).  I found one that worked for me... I did the following:

  Click on the start menu, then right click on "computer" and click Properties.
  Click the Manager option of devices on the left.
  Under "System devices", one of the first should be the appliance close the lid.  Right click and click on "Update Driver Software".
  Click "Browse my computer...". ", and then"Let Me pick from a list... ". »
  Uncheck it "Show compatible Hardware".
  In the list on the right, scroll down, select Manager of Volume and click Next.

  It was running great until the other day when I accidentally clicked on the Start button and then put the computer in mode 'sleep'.  Well now the computer screen lights up not at all.  All my family and I spent the weekend all put under tension of the laptop then turn it back, nothing will do.  I am now in panic mode since I use my computer to work from home as well as to take some college courses online! I found a lot of advice on this subject, but all of them are to be able to actually see what is on the screen! I need to know how to put the screen on the first!  I tried to take out the battery and unplug it but that no longer works. I know the computer becomes power b/c I can hear fans and restarting, but the screen does not light.  Help, please! From what I read it seems that it is a big problem with windows vista users!

  Hello

  Since it is not initialize, I suggest you to contact the manufacturer of the laptop computer for more help with this.

  http://support.Dell.com/

  Diana

  Microsoft Answers Support Engineer

• My screen on my laptop is on the side. How can I me he turned around?

  original title: my laptop screen

  My screen on my laptop is on the side. How can I me he turned around?

  On the desktop, do a right click, graphics options, Rotation.

  When you have done this, look in the Control panel, display, advanced settings for shortcut keys assigned to rotate the screen.  If you should never rotate the screen there is probably an installation to disable shortcuts.