TV not displayed as a multimedia device

Similar Questions

• Find resources VISA does not display my USB/GPIB device

  Hello

  I'm using LabView 8.0 with MAX 4.2.1.3001. I try to communicate with a former HP8563E Spectrum Analyzer with a GPIB to USB with VISA vi device nothing helps. When you try to find any valid VISA device with the vi 'VISA find resource' no device is returned. Can anyone offer any suggestions?

  -Chris

  Finally, I'll be back around him and the VISA drivers were not installed. This me baffled because in the latest versions of LabView, as 6.0, screws requiring some drivers (like writing serial port) were not available unless the associated drivers have been installed. Perhaps this philosophy has changed in more recent versions. In any case, thanks for your help

  -Chris

• HP Omen: Netflix main video content is not displayed on an external device

  My new HP omen plays the fine content on the screen of my laptop but when I connect it to a TV with a HDMI cable I get the audio and subtitles on TV but no video.

  tried this time by the app and the Web page.

  Hi @KhunRay,

  Welcome to the HP Forum! I'm happy that you've become a member of the HP Forum. It's such a wonderful site to find answers and advice. Here is a link to guide you to what the most rewarding experience and answer questions about the display: first time here? Learn how Post and more what is your specific model of omen?  Computers laptops HP - how can I find my model number, serial number or product?

  I understand that you have connected to a TV via HDMI, and you get the audio and subtitles, but no video. Here are some links that I hope will help.

  HP Notebook PC - connection of a monitor, projector or TV (Windows, 10, 8)

  HP Notebook PC - troubleshooting screen HDMI and sound problems

  Please let me know the results.

  Please let me know if that solves the problem by marking this post as 'Accept as Solution'. "To simply say thank you, click on the" ","inch Up ' below!   If you need more assistance let me know and I will gladly do everything I can to help.

• NetBeans Device Manager does not display peripheral reg with JAVA ME SDK 8.2

  Hello, looking for advice.

  Execution of netbeans 8.1, with java me SDK 8.2 and Java ME SDK and demo 8.2 tools plugins for netbeans.

  Problem is the device (rpi) is to be registered in the java me SDK 8.2 device manager, but will not display in the netbeans Device Manager. I try to run the java script to the RPI but fails with the error "non-registered device.

  I have attached a few pictures of the screen.

  If more info is needed please let me know.

  Thank you

  Adam

  Thank you, Harry.

  I was able to remedy late last night. I removed ME SDK and netbeans and plugins and reinstalled it, after that if worked like charm. I am now able to run java script for the pi of netbeans.

  Thank you

• When I go to media sharing in Windows Media Player 11 my xbox doesn't do not part of the illustrious devices.

  When I go to media sharing in Windows Media Player 11 my xbox doesn't do not part of the illustrious devices. How can I configure sharing with my xbox when it does not appear as a multimedia device. I tried setting up since the instructions given on the xbox, but it does not work. I tried to uninstall and reinstall media player, but it does not work. I can't find a button to add a device anywhere in media player

  Hi, David JohnTreacy,.

  I suggest you see the Microsoft article and check if the device is detected in the sharing of multimedia files.

  Share your multimedia files

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/share-media

   

  You can also see the article for more information:

  Listen to music from your computer to Xbox 360

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/stream-Xbox

   

  I hope this helps.

• I pressed "do not open pictures for this device" for when my iPhone connected. Now, I can't seem to find a way to import photos from that device because my phone is not displayed. Can anyone help?

  I pressed "do not open pictures for this device" for when my iPhone connected. Now, I can't seem to find a way to import photos from that device because my phone is not displayed. I now want to import photos from my iPhone, but nothing works. Can someone, please?

  MacBook Air, OS X El Capitan (10.11.1)

  Honestly, this entire thread is a repost of this , I pressed "do not open pictures for this device" for when my iPhone connected. Now, I can't seem to find a way to import photos from that device because my phone is not displayed. Can anyone help?

  Still no answer...

  Have you tried the following:

  • Launch Photos manually once you connect your iPhone to the Mac.
  • Enter the ⌥⌘S tomato (command-option-S) key combination the sidebar visible.
  • Click on the camera in the sidebar when it appears.

  Your iPhone shows in iTunes or in the Image Capture?

  If iPhone doesn't appear at all, make sure it is properly loaded and unlocked, disconnecting, take a new photo, then reconnect it.

  • Start iTunes and confirm that you agree with the mac, the prompt on the iPhone.
  • Try a different USB port.
  • Try to force reboot the iPhone.

• Not displaying data acquisition devices is not under the chassis to MAX after updating drivers OR

  We use a PXI-1031 chassis and 3 PXI-6143 devices to our MetalMapper of the geometry. Also the chassis appears only in MAX as "unidentified" and PXI-1031 is not displayed in the list "identify as".

  Thanks for your reply... uh... PeanutButterOven

  After having looked in the information requested for our controller, we realized that we had a wrong model for our controller number.

  After we have determined the correct model number (NI PXI-8108), we could assign to the unidentified PXI system in the "identify as" drop-down list in MAX > my system > devices and Interfaces and then select our chassis model number (PXI-1031DC).

  After we did it, a new object was automatically created called PXI-1031DC 'Châssis 1' and our devices were already provided in a drop down of this frame object.

  Thanks for your help!

  We now live a new show with our custom software that seems bound to not find .NET drivers even if they exist on our computer.  This seems to be a separate problem and we will publish it to a new discussion if we're stuck.

  Thanks again

• Device Manager does not display devices

  Control Panel takes me to the MMC, but Device Manager does not display devices

  Hi Bandjo,

  ·         Device Manager is empty?

  ·         You have made any changes recently?

  ·         You have installed Windows XP Service Pack 3?

  Check to see if this article helps you.

  None of the items appear in the device list manager when you open

• Device Manager does not display c or D drive.

  The Windows Device Manager does not display the drives c or d.  With File Explorer, they show and are easily accessible.  What's wrong?

  Hi Alberini,

  You would actually use the Device Manager to determine which devices are installed on your computer, update driver software for your devices, check to see if hardware is working properly and change the hardware settings. You can also use Device Manager to update a driver that does not work properly or restore a driver with its previous version.

  To view the files or the drive hard internal to your computer, would use you Windows Explorer.

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Sony VGN-AW41ZF "devices and printers" does not display anything, but they work

  devices and printers doesn't ' display anything, although all devices work.

  The reinstallation of the computer (sony VGN-AW41ZF) and add the devices, they have been posted.

  Later, we don't know why, "devices and printers" display nothing.

  Just added a scanner, no problem, but once again not displayed.

  Now add bluetooth devices does not work. My sony bluetooth mouse, I installed before the problem and it still works

  http://eSupport.Sony.com/

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  And make sure that Windows is up-to-date with the latest Service Pack.

  See you soon.

  Mick Murphy - Microsoft partner

• How to solve 'error display driver - video playback device does not support playback of protected content?

  This message started on my installation of windows 7 media center with the installation of tuner Cable Digital ati a few months.  I had the computer in my office with no monitor for a while and watched TV through my xbox on my samsung ln52b610.  so I decided to connect to the PC directly to the tv and now get this message saying 'error display driver - video playback device does not support playback of protected content'.  the strange thing is that if I go full screen, then new Media Center, here again, it seems to go away (most of the time).  my video card is a 8500gt nvidia with hdmi output and I tried the latest driver from them and still no worky.

  Take a look at the support links that can help solve your problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-TV/protected-content-error-after-a-few-seconds-of/da074c94-e741-E011-9767-d8d385dcbb12

  http://social.technet.Microsoft.com/forums/BG-BG/w7itpromedia/thread/3eea4165-8e37-42b7-A396-62663cc516a7

  If no go, Greenbutton forum would be place to post the question: http://thegreenbutton.com/forums/

• My embedded Jotforms not displayed on iOS devices

  Just checking to see if anyone has faced this problem. My embedded Jotforms to display very well on devices, desktop and Android not no matter what iOS designs.

  Maybe I missed a step somewhere?

  Rentaleez - new form of list

  I tried to check the forum users and you can see that several users complained about this, have you tried to communicate with them? If this isn't the case, then I suggest you to contact them directly.

  Thank you

  Sanjit

• Device simulated in MAX, auto test without error and has work Test panels, but is not displayed in the DAQ assistant.

  I am trying to create a development machine, where we can test the new code without using our physical hardware. I followed this guide to set up a system of simulation. I get to step 3.2 b, but the device does not appear in the DAQ assistant. MAX, the device self test and gites calibrated successfully, and when I open the test panels, I see some sort of signal. I guess that's a default entry simulated since I didn't that device to look for anything? Note that two devices, I am creating the show upward into the devices section and Interfaces, but that, even after running auto calibrate, automatic Calibration date is not yet specified.

  

  When I try to test the device and create a voltage according to the guide, I can't see a device in the creator of data acquisition task.

  

  Steps 1 and 2 of this guide are of course met. Step 3 is not, but this is not surprising because a simulated device is in device in any case manager. Also, I'm not under RT, so step 4 is satisfied.

  Someone at - it ideas?

  That would be because the PXI-5124 is a digitizer not an analog input device.  You must use the NI SCOPE not NOR DAQmx driver

• Vista Home Premiun Device Manager does not display my CD-ROM/DVD-ROM drive

  I recently tried to use my CD-ROM/DVD-ROM drive and it did not work. It was working fine a few days previously but now... Nothing.

  My first reaction was to open Windows Explorer, expand and look at computer. There was my C drive and the recovery Partition but no Opitical drive more.
  Then I opened the Device Manager and saw that the CD was registered it is more as well?

  My question is

  Vista automatically removes the CD-ROM drive in the list of Device Manager if there is a problem with the drive itself?

  Or is there something that happened this suppression the CD-ROM in Device Manager list and it is not a problem with the drive itself?

  I had a disc go bad before on a PC running Windows 98 and 2000, but the disc stayed in the Manager list but I'm pretty new to Vista and know things are very different. So before we get in panic Mode, I thought that it would be a good idea to ask where someone will know probably for sure.

  Thanks in advance for clues

  Len

  Hello

  1st try a restore of the system if you have a point of return before it happened.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -----------------------------------

  If no joy:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Double click on the ios10 lock screen does not display Apple pay even if it is enabled in the settings

  Double click on the ios10 lock screen does not display Apple pay even if it is enabled in the settings.

  Hello JPMain,

  Thank you for using communities of Apple Support. I understand Apple pay is not an option when the double click the Home button. I know access pay Apple for a locked screen can do so useful everyday. I'm happy to help you to get this resolved with you.

  I recommend first restart your iPhone. This can solve many unexpected behaviours. Follow the steps below if necessary.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  Restart your iPhone, iPad or iPod touch

  If the problem persists, the next option would be to reset all settings. It takes all the defaults, including passwords and Wi - Fi networks, alerts, notifications, brightness, wallpaper and sounds. This will also remove your cards Pay of Apple. Even if no content is lost with this step, it is always a good idea to back up first. If you do not have a recent backup, use the following link for assistance if necessary.

  The backup of your iPhone, iPad and iPod touch

  Once you have correctly saved, reset all settings in settings > general > reset > reset all settings.

  Have a great day!