TV Tuner does not work on Qosmio G20

Similar Questions

• Qosmio G20-139 of the United Kingdom - TV tuner does not work in Libya

  Hello

  My name is m, k, sh I live in Libya.
  I bought Qosmio G20-139 until now it works normal but I would not use this pc to look at the possibility of using satellite channels. I get only the small screen in the screen of my pc.

  In the operating manual of the said (tv tuner may not only work in the country of purchase. means to the United Kingdom only)
  My equation, what can do to solve the broblem.

  Can I install any software for example or another TV tuner?
  The tv tuner in this pc, what they said is integrated.

  Thank you very much

  Hello

  I think that the UK tuner will not work in Libya due to different video standards. I m talking about different settings PAL and NTSC.

  In your case, it would be desirable to use an external USB DVB - T tuner (if DVB - T is available in Libya) that supports PAL/NTSC in Libya settings.

  I think you have to look at some stores for local laptop/computer and should ask a few merchants for details.

  Welcome them

• TV tuner does not work with SP1 Vista32 on Qosmio G30

  Hello

  My TV card does not work with Vista32 SP1. Material contol said all workers, but the Media Center Receiver service crashes immediately after departure.

  Did someone knows a solution?

  Your Ruediger

  Hello Ruediger

  I don't know if this will help, but try to remove and install the tuner of TV Toshiba - 2.0.0.61129 again. You can find it on the Toshiba support page.

• F20-137: TV Tuner does not work on MCE

  I just purchased a Qosmio F20-137 and when I set up the TV Tuner (DVB - T) I had no problem. However when I try to watch TV on Media Center he frequently stutters and loses its signal (about once every 2/3 minutes). I tried a couple of different antennas ready (DVB - T), but the problem persists.

  I thought it was due to the TNT being strong enough signal. However I recently bought a £45 Freecom (DVB - T) usb to my desktop and it rarely or never stutters or loses its signal. The USB device does not work on the Qosmio so that I couldn't try on that.

  Is that what this indicates that there may be a problem with my laptop? Or can anyone suggest a possible solution to the problem?

  Thank you

  [Edited by: admin November 26 05 08:32]

  Hello

  Well, it s a strange question.
  Have you tried to watch TV via Qosmio player?
  In my opinion, you should check if this problem occurs when the Qosmio player.
  Please check.

  Good bye

• Vista Ultimate but Aero does not work on Qosmio F10 GeForce FX Go5700

  Hello

  I installed Windows Vista Ultimate on my "Qosmio F10" but dosen't work vista aero on it.

  My graphics card is "NVIDIA GeForce Go5700". Do you know when nVidia version driver WDDM for my VGA card?

  Hello

  The Vista NVIDIA GeForce Go5700 graphics card driver does not work for me, but I'm 100% sure that Toshiba will not publish the Vista drivers for this laptop.
  I found an official document from Toshiba on Vista support for Toshiba laptops models and the F10 is not listed there.

  You must search for the compatible graphics driver on 3 Web sites of third parties.

  Looking for similar themes here in the forum? It seems you didn t.
  Please check this thread and maybe you will find the key:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20441

• Wireless does not work on Qosmio f60-159

  I have a problem on a Qosmio f60-159.

  In "improving the performance of the computer", a message saying that some services that * ing the computer appeared and asked me if I wanted to turn this service off.
  I said yes and after that the wireless feature no longer works.

  The indicator in the front panel wireless is always on, no matter if I press this led or not.
  In addition, toggling the fn + f8 key does nothing.
  The diagnosis told me to turn on the radio, but if there is no switch in addition to these two, this solution does not work.

  I have cleaned the registry, reinstalled the wireless driver and when I try the same thing with bluetooth it says for the driver installation procedure I should turn on the wireless.

  What can I do?

  Hello

  It appears that you have disabled a service that controls the FN key or Wlan functionality. I think that the WiFi network is disabled and therefore it of not possible to establish the connection

  I think you should check this:
  Select all programs-> Toshiba-> Flash memory card Support utility, and then restart Flash cards.

  Flash cards control the FN keys and so I think that might help.

  Also I recommend that you check the Services tab, which is located in the Manager (CTRL + ALT + DELE) tasks

  Recommend to check and allowing (if disabled) the following process:
  Wlansvc (Wlan auto configuration)

  Good luck

• On my Satellite A660 TV tuner does not work

  Hello

  I bought a Toshiba Satellite A660-07 one a few months ago and then reinstalled Windows 7 32-bit system in order to have more than a few partitions. But I had not deleted the hidden partition the system just in case I need to restore factory settings.

  Now I have moved to a remote area and need a TV but only to discover that the tuner did not work. It is detected correctly under sound devices and games in the Device Manager. However, when I use windows media center to scan channels. The WMC just says the software has encountered a serious error and try again.

  Then I tried to use Blaze DTV, which is also a very popular DTV software. Successfully, it recognizes the Tuner but will not scan either.

  I did some research and used the advocatus of configuration of the tuner TV in Windows 7. The warning message is that "the tuner is not properly configured to be used in Windows Media Center". And the details show that the tuner is plugged but not active for the WMC.

  But how do I then activate the tuner for WMC?

  Really hope that someone can help as I am now panic in a small town remote in New Testament.

  Thank you!

  > I bought a Toshiba Satellite A660-07 one a few months ago and then reinstalled Windows 7 32-bit system in order to have more than a few partitions. But I had not deleted the hidden partition the system just in case I need to restore factory settings.
  I see a big problem here. If you have installed your own version of Windows then you will not be able to start the installation of image factory more.
  Due to this fact Toshiba strongly recommends the creation of recovery DVDs. It is described in s operating manuals.

  In any case, one question at first: you've found the right 32-bit driver TV tuner? TV tuner is installed correctly?

• Qosmio G35 - TV tuner does not work in Turkey

  I bought G35-AV650 of us (ntsc) and it does not wotk in turkey (pal)
  is it possible to change NTSC to pal
  Thanks in advance

  CEM

  Hi Cem

  I hope that this document will help you http://support.toshiba-tro.de/kb0/TSB4600QF000OR01.htm

  Good bye

• Tot on HP Pavilion dv7-1090ed TV tuner does not work after the upgrade to Vista 64 bit Windows 7

  After having upgraded my HP Pavilion dv7-1090ed Vista 32 bit to 64 bit Windows 7 Ultimate, my TV Tuner no longer works. Windows Media Center does not recognize there is that a HP en DVB - T TV tuner is not able to find the digital terrestrial channels-tv, I could look under Vista.

  I searched several for one for the advice and tried to install several recommended drivers but so far without success. Can someone help me with this?

  Hi Charlie54,

  You can try using Recovery Manager to restore the software and drivers (Windows 7) to restore the original drivers, or you can try to install the Windows 7 drivers.

  Here is the Windows 7 drivers for the Software HP MediaSmart Live TV and the TV Tuner driver, they should both be installed.

  I hope this helps, please let me know.

  Thanks and good luck!

• NumLock does not work on Qosmio X 70 - A

  NumLock does not. How to activate the numlok?
  External keyboard numlok works

  It is placed on the keyboard NUM LOCK key that allows you to toggle umber block on the right side of your laptop.

• Qosmio G35 - AV600 the TV Tuner does not work in Argentina?

  I bought a Qosmio G35-AV600 in the United States and now I'm in Argentina. I connected the coaxial cable. I have to pay attention to color, but image is random on-site with squares colored all around him. Any suggestion on how to solve it?
  Thank you very much

  Hello

  I think that this problem is related to the NTSC / PAL settings.
  The TV tuner equipped in the notebook for a U.S. market supports only NTSC and this could be the cause of your problem.

  Here is a link to an article in Wikipedia on the PAL:
  http://en.Wikipedia.org/wiki/PAL

  There, I found this:
  + In Argentina, the PAL - Nc (combination N) variant is used. It employs the line field 625/50 per second waveform of PAL-B/G, D/K, H, I, but with a frequency of 3,582 MHz chroma subcarrier. +.

• Satellite L20-183: PCMCIA Pixelview Tuner does not work with 720 * 480

  I have the following problem:
  I am the owner of a

  Toshiba laptop Satellite L20-183 (1.6 Celeron, 512 MB Ram, Ati radeon Xpress Mobile X 200)

  I just bought a
  Mobile TV Tuner PCMCIA (Prolink) Pixelview PlayTV havig the following specifications:
  http://www.ProLink.com.tw/English/products...ixelView%20Play TV%20Mobile.htm

  as you can see it it says he works at the frame size PAL: 720 x 576; NTSC: 720 x 480

  which is true, but not with my laptop
  It is functional on a laptop HP Celeron 2.8 Mhz, 512 Ram and Ati 9100 IGP

  on my laptop, it only works to the minimum framerate 320 * 288 (as I remember), but then the passage to the maximum framerate of 720 * 480 there are artifacts (horizontal lines) on the right size of the screen.

  I say it again on a similar notebook (talk configuration) with ATI 9100 IGP it works perfectly at maximum framerate.

  Someone told that can a card linked to overaly settings video problem, but it unlikely for me as long as lon semms as he worked on another laptop with ATI IGP 9100, which seems to be older than my video card. (By the way all the parameters and options are the same on two laptops)

  SOMEONE HELLLPPPPP!

  Hello
  Check the BIOS on the toshiba. BIOS in the video settings, there should be a possibility to change the PAL or NTSC. If the value is NTSC I see problems that you described. So as if you right-click on the desktop and select Properties, click on the tab on the far right, a last and properties then go to advanced. Under these properties, it must have an option to NTSC or PAL. Make sure that PAL is thus selected here and see if that solves the problem. I hope this helps.

• Live TV - Windows Media Center does not work on Qosmio F30

  I can't enter the Media Center, but I can't run live TV.
  I have a Qosmio F30 - 112, with Windows Vista 32 - bit

  Help! Please

  Hello Marko

  Sorry, but it's a bad way to report a problem. Description of your problem a single sentence isn't going to help a lot to understand what the problem is here. Can you offer more information please?
  TV tuner is installed correctly?
  Some unknown device is listed in Device Manager?
  What antenna do you use? Is - this cable TV or what?
  Have you tried to scan channels on MCE?

  Thanks to succinct report to us and let us know what you have tried to solve this problem.

• GADMEI USB TV Tuner card does not work on the new Windows 7 computer

  Original title: usb tv card is not supported in windows 7 x 64

  Hello

  I have new office... everything works fine, the problem is with my tv usb card.

  I tried gadmei model utv882e and utv332e... no one works with my office... but in my laptop with the same version of windows, two tv cards works very well.

  I have no other problems in my pc or tv... cards all drivers are up to date.

  Here is my desktop specs:

  model of motherboard is asus b85m-k

  

  

  Hello Faysal,

  Thank you for visiting Microsoft Community.

  As described in the question, I understand that your two cards of Gadmei USB TV Tuner does not work on your Windows 7 desktop. The same card works fine on another computer in Windows 7 with the same configuration.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. What happens when you plug-in card TV Tuner? Your computer will detect the device? Do you have a code or a message when it fails to connect?
  2. Did you check connecting them via a different USB port?

  There may be a possibility that drivers for Gadmei TV sticks are not correctly installed on the computer. We will try these methods below and check if that helps.

  Method 1:

  First of all, I suggest you to run the following Microsoft Fixit to get the problem diagnosed and fixed automatically.

  Hardware devices do not work or are not detected in Windows

  http://Support2.Microsoft.com/mats/hardware_device_problems?WA=wsignin1.0

  Method 2:

  If the fixit above does not resolve the problem, I suggest to download the best compatible driver on the device manufacturer (Gadmei) site or contact Gadmei to get the best driver for your computer and install it.

  You can also read the article below to help update the device driver.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps. Please let us know the results. Do not hesitate to write back for any further assistance with Windows, we will be happy to help you.

• Internal TV tuner for the Qosmio G20 does not work

  I have a qosmio G20 and the built in TV does not work, I reinstalled the driver and the program windvr 5 but no response.
  Whenever I start the program, I can't use the installer.
  Please can someone help me?

  Hello

  Qosmio G20 was delivered with Windows MCE.
  You can also use the Media Center Microsoft watch TV on the laptop!

  Please check if the built-in TV tuner works with MCE. If so, there is nothing wrong with the tuner or the drivers!

  Best regards