TV Tuner while improving to XP Pro problem

Similar Questions

• Publish while improving the view to 5.2

  
  Hello

  I am facing problem while improving VMware view connection/replica of 5.1.1 on Horizon 5.2. Configuration file get disappears, unable to continue installation.

  The Setup program starts and disappears. The is no problem with the server hardware.

  Problem has been resolved, problem with the configuration file. I downloaded the new configuration file that solves the problem.

• is it possible to improve the Macbook Pro early 2011 2 GB + 2 GB to 8 GB + 2 GB RAM?

  Hi, I am currently using Macbook Pro 13 inch early 2011 (2.3 GHz Intel Core i5, Intel HD Graphics 3000 512 MB) and it feels really slow to run several design takes the same time, so I think it's maybe a good time to upgrade it's RAM. My friend gave me a piece of 8 GB RAM Corsair DDR3 1333 Mhz 1 x 204 pins SODIMM. Is it possible to replace one of my RAM with it?

  I would not use the Corsair - you may want to OWC or critical

  and technically - this MBP can go up to 16 GB

  http://www.EveryMac.com/systems/Apple/Macbook_pro/specs/MacBook-Pro-core-i5-2.3-13-early-2011-unibody-Thunderbolt-specs...

  Standard RAM:

  4 GB

  Maximum RAM:

  16 GB *.

  Details:

  4 GB of RAM is installed as two modules of 2 GB, not free slots. * Apple officially supports a maximum of 8 GB of RAM, but as first confirmed by the sponsor of the OWC site, this model is actually able to use up to 16 GB of RAM with two modules of memory of 8 GB. In the United States (and many other countries), the sponsor of the site, Other World Computing sells memory - along with other improvements - This MacBook Pro. In the United Kingdom, the Flexx site sponsor sells memory and other improvements for This MacBook Pro. In Australia, sponsor of the RamCity site sells memory and other improvements for this MacBook Pro. In Southeast Asia, sponsor of the SimplyMac.sg site sells memory and other improvements for this MacBook Pro. See also: Actual Max RAM of all G3 & later Macs.

• 0xc000001d error occurs while open Adobe premiere pro application

  0xc000001d error occurs while open Adobe premiere pro application

  KB2999226 is listed in the installed updates?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You will find support for Adobe Premier Pro in this forum-online https://forums.adobe.com/community/premiere

• Memory problem while improving my Satellite A100-181

  Hi all

  I want to upgrade RAM on my Satellite A100-181, 512 MB is a bit limited...
  I ordered a 1 GB dimm noname a month before, put in it, with the 512dimm. As a result, we have only 1 GB recognized, and the laptop does not start if the 512 module is not mounted.

  I thought it was a bad memory module and ordered a kit 2 GB of crucial memory modules, which come paired and guaranteed by Crucial to be compatible with the toshiba A100-181.
  Result is the same: with 2 DIMMS inserted, the PC does not start: just turn on and off and still... With only 1 dimm, it does not start unless the 512 original module is attached to it... And once again, only 1 GB is recognized (915456Ko in the bios, but I guess that video reserved memory is not counted here)

  Is that what anyone has ever heard a problem / solution to this issue?

  Thank you very much.

  It is typical behavior when you use incompatible modules.
  Your laptop can handle with 2 GB max and compatible with 1 GB of Ram is DDR2 400/533 1 GB (PA3411U-1M1G). Use this part number to order compatible module.

  You can also buy the Kingston/Order module. Kingston offers high quality products and using them you won't have these problems.

  The Modules of RAM 'Value' use many chips cheap using several banks/channels, which can cause problems of compatibility with some Chipsets/CPUS.

• Problem of Listener while improving the 10g 9i

  Hello
  
  We are underprocess R12 upgrade, in the frame or R12 upgrade right now we are doing the upgrade from 9.2.0.6 to 10.2.0.4 DB
  
  for DB Upgrade:
  Installing Oracle Database 10g. (Software only).
  d > install the accompanying CD.
  e > game patches to install 10.2.0.3
  f > create the directory nls/data/9idata
  g > install 10 g Listener_
  
  to install new 10g listener, I stop 9i earpiece and using netca I created the new listening port, but I am not able to make it appear the oracle 10 g Home development banks
  
  ==========================================================
  [oracle@upg PROD_upg] $ lsnrctl start PROD_10G
  
  LSNRCTL for Linux: release 9.2.0.6.0 - Production on March 19, 2009 06:40:04
  
  Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
  
  Start/u01/10204 / / bin/tnslsnr: Please wait...
  
  TNSLSNR for Linux: release 10.2.0.4.0 - Production
  System settings file is /u01/10204/network/admin/PROD_upg/listener.ora
  Log messages written to /u01/10204/network/log/prod_10g.log
  Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=upg.oracle.com) (PORT = 1521)))
  
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=upg.oracle.com) (PORT = 1521)))
  AMT-12541: TNS:no listener
  AMT-12560: TNS:protocol adapter error
  AMT-00511: no listener
  Linux error: 111: connection refused
  ======================================================================
  
  Here is the information from the log file
  ==========================
  Cat /u01/10204/network/log/prod_10g.log
  
  TNSLSNR for Linux: release 10.2.0.4.0 - Production on March 19, 2009 06:02:39
  
  Copyright (c) 1991, 2007, Oracle. All rights reserved.
  
  System settings file is /u01/proddb/9.2.0/network/admin/PROD_upg/listener.ora
  Log messages written to /u01/10204/network/log/prod_10g.log
  Trace information written to /u01/10204/network/trace/prod_10g.trc
  Trace level is currently 0
  
  Started with pid = 19904
  Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=upg.oracle.com) (PORT = 1523)))
  Listener completed notification to the CRS start
  
  TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
  
  TNSLSNR for Linux: release 10.2.0.4.0 - Production on March 19, 2009 06:03:07
  
  Copyright (c) 1991, 2007, Oracle. All rights reserved.
  
  System settings file is /u01/proddb/9.2.0/network/admin/PROD_upg/listener.ora
  Log messages written to /u01/10204/network/log/prod_10g.log
  Trace information written to /u01/10204/network/trace/prod_10g.trc
  Trace level is currently 0
  
  Started with pid = 19910
  Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=upg.oracle.com) (PORT = 1523)))
  Listener completed notification to the CRS start
  
  TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
  
  TNSLSNR for Linux: release 10.2.0.4.0 - Production on March 19, 2009 06:39:17
  
  Copyright (c) 1991, 2007, Oracle. All rights reserved.
  
  System settings file is /u01/10204/network/admin/PROD_upg/listener.ora
  Log messages written to /u01/10204/network/log/prod_10g.log
  Trace information written to /u01/10204/network/trace/prod_10g.trc
  Trace level is currently 0
  
  Started with pid = 20362
  Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=upg.oracle.com) (PORT = 1521)))
  Listener completed notification to the CRS start
  
  TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
  
  TNSLSNR for Linux: release 10.2.0.4.0 - Production on March 19, 2009 06:40:04
  
  Copyright (c) 1991, 2007, Oracle. All rights reserved.
  
  System settings file is /u01/10204/network/admin/PROD_upg/listener.ora
  Log messages written to /u01/10204/network/log/prod_10g.log
  Trace information written to /u01/10204/network/trace/prod_10g.trc
  Trace level is currently 0
  
  Started with pid = 20373
  Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=upg.oracle.com) (PORT = 1521)))
  Listener completed notification to the CRS start
  
  TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE

  Hello

  You try to start the listener PROD or UPG?

  What is returns 'lsnrct start PROD "?

  Please make sure you set ORACLE_HOME and ORACLE_SID manually to 10g ORACLE_HOME before starting the listener. Also, make sure that the env 9i database file is not defined in the oracle user profile.

  Kind regards
  Hussein

• 2 MagSafe charger or Macbook Pro problem

  Hello! I recently bought a Macbook Pro of the retina (at the beginning of 2015) here in Singapore, with the prepackaged MagSafe 2 charger with it. I always charge my computer while using it, and usually, my uses are extremely lightweight.

  Well, here's the problem... Yesterday, when I was about to plug my charger to my Macbook, I realized that there are very obvious stains in the Macbook port itself. Look at the head of the charger, it is not even and seems to have slightly burnt and melted.

  I am still able to load and use my computer very well, but I fear that if this continues, this degrades quickly in the fire. My sister advised me to swap the Macbook Pro itself for a new one, which I suppose is possible through discoloration, but despite everything, is the Macbook Pro the problem? Reading the various forums online suggests that this is the problem with the MagSafe 2 magazine.

  Please share some thoughts, thank you!

  "Recently" may be in a period of Exchange or not.  Whatever it is, you have at least a 1 year warranty (AppleCare that extends to 3) and you must use to find the answer before it becomes more than a gene and damage the MBP.

• iPad pro problem showing images video and Youtube eBay

  Hi all

  I have a strange problem with my iPad pro (and before that with the iPad 1 air).

  Installation program:

  • Telekom VDSL 50, Telekom Speedport W724V
  • 2 WLAN Range Extenders (1 Telekom, 1 Devolo)
  • iPad Pro and before the Air1 iPad with problem
  • iPhone 6 s more, iPad 2 Air without problem
  • peripheral and peripheral issues no problem have the same WLAN settings
  • everything on the same level of iOS
  • no problem with cell phone, Wifi only!

  Affected applications:

  YouTube and eBay Apps

  problem also occurs when you access related Web sites via iOS Safari, but less frequent

  Problem:

  Applications have problems to load media files (pictures and videos). After a while, network errors occur und sites can no longer be reached.

  Seems it to come in different severities: sometimes I solve the problem by turning WLAN off and back on. Sometimes to renew the lease from network works. Sometimes, I need to turn the iPad and turn it back on. Any action is temporary, the problem reoccur, and more I use the sites, the shorter the time before the problem came back again.

  Does anyone have the same problem? Any ideas or solutions?

  Thank you very much

  I have a similar problem, but only when I am connected to my Wifi extender (via the Powerline) devolo. As soon as I connect to my router directly, the problem disappeared.

  In my view, the problem is caused because recent versions of IoS are more compatible with the Devolo WiFi extender.

  No idea how to fix?

• Apple Mail has stopped while improving

  I was not able to use my mail since Dec. 30. ! Talk to seniors to Support Apple daily, but they are waiting for answer of Ireland engineers (or elsewhere)... I'm about to get totally freaked because I am an editor for the web-sites/magazines thre. I made a new user, but it takes too long to come and go between the two accounts, and I'm not really interested in transfer all to the new user, as I have my system on the first. I use a mobile router also and if I have to download everything once more, he eats gigabytes.

  I'm really disappointed with Apple's Support, as they say first they will respond within 24 hours, then they say in 4 workingdays... Days, 4 days are long gone and senior supporters have nothing heard of engineers. Worst nightmare ever! My son told me hundreds of times that Apple * and I have to use (buy) Microsoft. I have always defended Apple, but now I'm not an Apple fan more.

  I deleted my email accounts, but the mailprogramme is still stuck in the middel of "upgrade of the library".

  Anyone with experience to solve this problem, or is the best solution to return to Microsoft?

  Thank you for helping me with this horrible problem. I like the computers when they work and hate them when not...

  BTW, I use the OS X El Capitan, version 10.11.2 on my MacBook Pro 17 "of 2011...

  Rgds,

  DrHouseGro

  The new version of Mail stores its database in a different format that the old, so the database must be converted before Mail can use it. Sometimes, the conversion fails because the old database is damaged, or because of a bug in the conversion code.

  What you should do depends on what type of e-mail accounts you have. The first step is to back up all data, if you don't have a current backup.

  A. Si you know that you have IMAP or Exchange only e-mail accounts

  The easy way to recover is to delete the old database and start over. You can do this without losing all the messages, provided that:

  ☞ All your incoming mail accounts are on an IMAP or Exchange Server

  ☞ You store messages sent on the server

  ☞ You have no mailboxes "on my Mac".

  Independent mail services the best-known as iCloud and Gmail are inspired by the IMAP. On the other hand, hosted by ISP e-mail services often use pop. If your ISP is one of your providers of mail services (or the only), you cannot use this procedure. See the section below in this case.

  If you know that the above conditions are met, please continue to do so.

  Quit Mail runs. Back up all data.

  Open your home folder's library folder by pressing the option key and selection

  Go ▹ library

  in the Finder menu bar. Inside, it is a subfolder named "mail". Move this folder on the desktop. You do not move the e-mail application; you move a folder named "mail".

  Launch of Mail. Your mailbox should be restored automatically. The messages will be downloaded from the servers, so it can take a long time if you have very large mailboxes. Some people have mailboxes in the gigabyte range, and which can be a problem if your bandwidth is measured.

  If the mailboxes are restored successfully, you can delete the folder that you moved to the desktop. You may have to re-create your rules, signatures and custom stationery Mail. While it is very important for you not to have to do these things, ask for instructions before you delete the folder.

  B. Si you have a POP or "on my Mac" mailbox store, or if you don't know what you have

  Move the folder of mail on the desktop as in the part has and open.

  Press the key combination command + F to search. In the line of chips to search along the upper part of the window, select "Mail". Below, defined as the search criteria

  The name ends with mbox

  Results of the research will be a list of folders with a name ending with '.mbox '. Each of them represents a box the letters.

  Launch of Mail. All mailboxes will be empty at the beginning, but if you have any IMAP or Exchange mailbox (including iCloud), they should fill in automatically after a delay, as in part A. If you have now all the messages you want to keep, you can stop here. Otherwise, import from mailboxes in the search results. You'll probably want to skip those with names such as "Deleted Messages", "Junk", "Spam", or "Trash". Some may be duplicates of what you already; those that you can remove.

  In some cases, a mailbox may fail with an error to import. If this happens, thanks for posting your results.

  If all the mailboxes imported successfully, you can delete the mail on the desktop folder.

• Copy/scanninf with HP Officejet 8600 pro problems

  I have a desktop HP all-in-one running Windows 7 (64-bit). The printer HP Officejet 8600 pro range is connected to the printer via a USB cable. Scanning/copying is all lines verticle edge edge of the paper. I ran the HP scan doctor software and it showed that everything works. Still no usable copy. Search HP site and the forum of solutions. Tried what I found. Still no solution found.

  Well, I thought was this Chantilly when a blogger told me to try another outlet. It worked for a while. Now, the scanner lamp isn't bright lighting as it did before. She is dark, almost orange. The printer's two month warranty. Is this a bad sanner lamp or something else?

  Can someone help me solve the problem?

  Thanks for the pointers. I'll try them and I hope that this solves the problem.

• HP MFP M127fw Pro: Problem with scan/fax and adf on HP MFP M127fw Pro

  After that I faxed a couple of pages, the device does not work. Now, when I want to fax, he asks me if I want to scan from the plateau, even if I fed the ADF with the paper. When I want to scan, it says "Calibration."... "for a while, but nothing is happening then. It receives the fax and print documents. I unplugged the cable of electricity for more than 60 seconds, downloaded the new drivers from the HP site and installed, but it did not work. Could you please help?

  Best,

  Farrokh

  Hi @Habibzadeh,

  Welcome to the Forums of HP Support!

  I see that you are unable to fax and scan with your printer HP LaserJet Pro MFP M127. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I can understand the frustration you are experiencing. Whenever the printer is calibrated, it will not be able to do anything until it is complete.  We must determine why it is calibrated.

  I see that you updated the drivers, but you updating of the firmware of the printer?

  • Click here for the HP LaserJet Pro MFP M127/M128 series Firmware Update
  • Make sure that the printer is connected directly to a wall outlet (do not use a bar or a surge protector). This ensures that the printer is full on and can help this situation.

  The printer may need maintenance, please use this guide to help you determine the cause:

  • Fixing poor print quality

  You use Genuine HP Toner?
  What are the levels of toner?

  Note: HP recommends you to use genuine HP cartridges. HP does not guarantee the quality or reliability of cartridges HP cartridges refilled HP. If you use genuine HP, the following cartridges no can not solve the problem.

  If you have a faulty cartridge, it might be under warranty. To check the warranty on your ink supplies, go to hp.com/go/learnaboutsupplies, select your country/region, and then check the information of limited warranty for your supplies.

  If you have completed all the above steps and your product still has a problem, service the product.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Authentication failure TMS while improving the TMSPE to 1.4

  Same problem as https://supportforums.cisco.com/discussion/12333951/tms-authentication-error-while-installing-tmspe here

  But while trying to TMSPE of 1.3 to 1.4 after completing the MSDS go to 14.6

  1.4 deployment guide mentions "Cisco TMSPE has been tested with Java 7, updated 51, 32-bit and 64-bit versions"

  Which is the same as TMSPE 1.3

  If the doc is fake or this time, it's a different question than the Java version

  I had the same problem as you, improved TMS to 14.6 and then tried to update TMSPE to 1.4.  One thing I did and it solved my problem is to reboot the server after that updated MSDS to level, before attempting to upgrade TMSPE.

• License with Adobe Acrobat Pro problem

  I have a problem with Adobe Acrobat Pro as part of Adobe Creative Suite CS 6 on Mac OS X 10.11.6: Adobe Acrobat does not start. Whenever I try to open a pdf file or the itsself program (Acrobat), Acrobat appears inside the docking station, as well as within the monitor activity for a few seconds, but never actually opens and then disappears from the docking station and the activity monitor. No error message appears, namely, what is the problem.

  During the last two weeks, I tried the suggestions basically all troubleshooting I found on the web several times, mainly:

  • Try to uninstall and reinstall Adobe Acrobat by itsself as well as all of the Creative Suite (of course, using "Adobe Installers")
  • Running the Creative-cloud-Cleaner on my computer after uninstallation and before the re-setup
  • Deactivate and reactivate my license Creative Suite (using InDesign to perform this task, given that Acrobat does not open)
  • etc.

  More funny thing is: when I try to deactivate the license via InDesign, Acrobat will not show even as one of the programmes concerned, see attached screenshot.

  

  That is why, in my view, the problem could be a licensing problem. The reason why I had the problem in the first place, could be the following: I accidentally uninstalled Adobe Acrobat while being offline. After that, as mentioned above, I tried- and reinstall the program and all of the following several times while being online - but no result.

  I'm happy for any suggestion. Assistance telephone Adobe doesn't seem to be available for this product and I have redirected to this forum when you try to start a chat support with Adobe, I'm happy for all the help from the community!

  PS: I guess that's not relevant, but I'll talk anway: another application, "Adobe Crash Demon" shows within the activity monitor, every time I open InDesign (but isn't, when I try to open Acrobat). The content of the error message does not mention Acrobat.

  Hi kglad,.

  Thank you for your message. Unfortunately, I couldn't find very useful advice in the log files, because I'm not very experienced in the search for log files and I could not find solutions to the error messages on the web.

  But, fortunately, an update of the system for Mac OS Sierra finally helped me to solve the problem. Obviously, the update changed some system parameters and / or preferences, and I finally could start once Adobe Acrobat. He is still vulnerable, however. It seems, I'm having some trouble with my graphics, too, but I guess I'll be able to fix those shortly.

  I am very happy, Acrobat is finally running once more!

  Thanks for your support, I'll mark the issue as resolved.

  Kind regards

  Evelin

• Weird scrolling in Premier Pro problem

  When I move my mouse to the right of the window in the sequence, the sequence window starts to scroll out of control right! Move the mouse to the left while the window is scrolled to the left! I can't seem to stop restarting, unplugging the mouse, reset mouse... the problem is that in Premiere Pro.

  The question seems to have disappeared for those who have updated (beyond 2014 worms.)

  It was not mentioned for a while with Mac users.

• SOA-INFRA is State FAILURE while improving the Oracle Identity Manager to 11.1.1.5

  This issue occurred when we tried to improve our IOM to version 11.1.1.5.

  All suites installation went well (Oracle IDAM 11.1.1.5) and SOA Suite 11.1.1.5. The field is also created, and schemas are also upgraded. But when we create a domain, the domain created, the SOA_INFRA application comes in the onset of failure, even if the soa server returns execution state.

  Please find the logs below (found when you start the server):

  < 31 July 2013 12:19:36 CEST > < error > < org.springframework.web.context.ContextLoader > < BEA-000000 > < failed to initialize context

  org.springframework.beans.factory.BeanCreationException: error creating bean with name "SensorManager" defined in ServletContext resource [/WEB-INF/fabric-config-core.xml]: cannot resolve a reference to 'FabricMesh' of the bean while setting the property "fabricMesh" bean nested exception is org.springframework.beans.factory.BeanCreationException: error creating bean with name 'FabricMesh': FactoryBean threw the exception on the creation of the object; nested exception is org.springframework.beans.factory.BeanCreationException: error creating bean with name 'FabricMeshTarget' defined in ServletContext resource [/WEB-INF/fabric-config.xml]: cannot resolve a reference to 'SpringServiceEngine' bean when bean property setting "serviceEngines" with the button [6]; nested exception is org.springframework.beans.factory.CannotLoadBeanClassException: class loading error [oracle.integration.platform.blocks.java.SpringServiceEngine] to the beans with the name 'SpringServiceEngine' defined in ServletContext resource [/WEB-INF/fabric-config.xml]: problem with the file class or dependent class; nested exception is java.lang.NoClassDefFoundError: weblogic/sca/api/ScaReferenceProcessor

  at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:275)

  at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:104)

  at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1245)

  at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1010)

  at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472)

  to org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$ 1.run(AbstractAutowireCapableBeanFactory.java:409)

  at java.security.AccessController.doPrivileged (Native Method)

  at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)

  to org.springframework.beans.factory.support.AbstractBeanFactory$ 1.getObject(AbstractBeanFactory.java:264)

  at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)

  at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)

  at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)

  at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)

  at org.springframework.beans.factory.support.DefaultListableBeanFactory.getBeansOfType(DefaultListableBeanFactory.java:308)

  at org.springframework.context.support.AbstractApplicationContext.getBeansOfType(AbstractApplicationContext.java:947)

  at org.springframework.context.support.AbstractApplicationContext.registerListeners (AbstractApplicationContext.jav

  The following link is as a result of the upgrade.

  http://docs.Oracle.com/CD/E23943_01/upgrade.1111/e10129/upgrade_oim.htm

  Any help will be much appreciated.

  Hello

  I found the solution to my problem in the following link:

  http://blog.Darwin-it.nl/2012/05/IM-helping-my-new-customer-in-migrating.html

  Kind regards

  Carole