Two areas of OSB on same MDS

Similar Questions

• Two areas of OSB on the same machine

  Hello
  
  I have configured two OSB to test areas following SAML blog below.
  
  http://atheek.WordPress.com/2011/12/16/SAML-with-OWSM-in-OSB/
  
  I created two areas on different ports, but on the same machine. I have 6 GB of RAM.
  
  I have configured the different patterns of MDS. When I start the server only the departure of fields. I can't start the second domain server.
  
  Can someone tell me what the problem is.
  
  Thank you.

  You must change the port for the second domain server debugging,
  the second domain server pointed also to the same debug port of the first domain server that is already in use, I think why the second domain server is not getting up and running!

  DEBUG_PORT can be changed by accessing $DOMAIN_HOME/bin/setDomainEnv.bat

  Concerning
  Afonso Gupta

• Management node for two areas located on the same server

  I need help to understand how to set up management node for two areas on the same servers. My configuration is:
  
  Server A:
  AdminServer to area D1
  ManagedServer1 area D1
  ManagedServer2 domain D2
  ServerB:
  AdminServer for domain D2
  ManagedServer1 domain D2
  ManagedServer2 area D1
  
  Just to clarify, D1 and D2 are dev and qa environment. WebLogic configurations and domain are all in different and completely separate folders.
  
  I started a manager based on java node on each server. Managers node configs are in different folders as well. Something is messed up, because it does not work properly. For example when I start nodes on server B Manager, he kills AdminServer for D2.
  
  Can I have that one manager of the nodes in this configuration, and the problem is in the config somewhere?
  I should have a management node on each server for each domain (two per server node managers?)
  
  Sorry if this is a basic trick, I am newbie in the weblogic configurations.
  
  Thank you
  Oleg

  Not sure why you have several domains. A server administrator can manage multiple clusters in a single domain. A domain is just a group admin servers and clusters. You could do something like:

  Server A:
  AdminServer domain D1 with 2 groups C1, C2
  ManagedServer1 cluster C1
  ManagedServer2 cluster C2
  ServerB:
  ManagedServer1 cluster C2
  ManagedServer2 cluster C1

  that would allow you to use only 1 nodemanager by server

  With your current setup, make sure that each of your domains using a Nodemanager port separate from each other. The default value is 5556, so if two of your domains use the same port NM, there will be a problem.

  For example, with your domain name:

  Server A:
  AdminServer to area D1
  ManagedServer1 domain D1 - use port 5556 NM
  ManagedServer2 domain D2 - use NM port 5557
  ServerB:
  AdminServer for domain D2
  ManagedServer1 domain D2 - use NM port 5557
  ManagedServer2 domain D1 - use port 5556 NM

  You will need set the nodemanager.properties and the configuration of the Machine in BOTH appropriate for each administration console. You should be able to run multiple nodemanagers on different ports.

• the Air iPad does not connect to a printer to air even if the two are on the same network

  DIIAP Air does not connect to air printer, even if the two are connected to the same network. Message "Air printer not found".

  Readhere: printing from your iPhone, iPad or iPod touch - Apple Support

• two areas?

  Can I have the areas on my site using the external FTP server?

  Hello

  If you mean, two areas, pointing to the same site, so yes, it is possible. If you use a third-party host, you can check with your provider about how to do this.

• Two virts never share the same host... What are my options?

  Hi all

  Ive got two virts which are nearly identical and work in an active/active load. What are the options I have to ensure that these two virts never end up on the same physical host?

  I'm not looking for FT. I'll have two functional virts at the same time.

  Thank you!

  You can do this by setting VM - VM DRS anti affinity rules.

  André

• How can I create a cluster of two instances that are running on the same server?

  Hello
  I can't find how to create a cluster or even a rule of failover for my two instances that are running on the same server ODSEE 11 GR 1 material.
  Could you please help?
  
  Thank you

  Hello
  Clustering (intended as Sun Cluster, Veritas Cluster, etc...) IS NOT supported since 7.0:

  http://docs.Oracle.com/CD/E20295_01/PDF/821-1216.PDF [page 20]

  and, according to my own experience, is the WORST way to achieve high availability of Service LDAP directory and in a way almost CONCEDED for replication problems in your topology (lock, split, re-init, etc...).

  Please use the "application level" collection that you get out of the box with the multimaster replication.

  http://docs.Oracle.com/CD/E20295_01/HTML/821-1217/index.html

  http://docs.Oracle.com/CD/E20295_01/HTML/821-1220/fhkry.html#scrolltoc

  HTH,
  Marco

• IMessage Apple Watch has two interviews separated with the same person?

  My new Apple Watch has a problem with iMessage and I know how to fix this on my iPhone but not watch?

  On my iPhone, that my ID apple is connected to more than 10 devices and sometimes when a new device is added, it adds the addresses on my apple for iMessage and FaceTime ID and I always fix by unchecking the addresses that I don't want in the application settings under "Messages" and "FaceTime." However, this isn't the same thing to watch because there is no option in the settings on the Apple Watch and the watch App on my iPhone.

  I would like to help please?

  Hello

  Apple Watch uses the same parameters (for how you can be reached and how new conversations are started) for Messages as your iPhone.

  If you have two interviews separated with the same person, the following steps may help:

  • On your iPhone, check if there is more than one contact form in Contacts of this person (if so, remove duplicates).
  • Delete old Messages conversations with this contact on each of your iPhone and watch:
    • iPhone: app Messages > swipe to the left on a message thread > delete.
    • View: Open the Messages app (from the home screen, which is accessible by pressing the digital Crown) > swipe to the left on a message thread > tap on Trash / delete.
  • On your iPhone in the app Watch: Watch My > general > reset > press reset sync data:
    • You won't see anything happen after pressing it (the process runs in the background, invisible to the user).
    • Leave a minute or two to allow the course ends.
  • Restart your iPhone and your watch (turn the two together off the coast, then restart your iPhone first):
    • Restart your iPhone, iPad or iPod touch - Apple Support

    • Restart your Apple Watch - Apple Support

• I am not able to download apps for my iPhone on the App Store. He just 'waiting '. But never starts the download. I tried with wifi and mobile data. The two are not download apps

  I am not able to download apps for my iPhone on the App Store. He just 'waiting '. But never starts the download. I tried with wifi and mobile data. The two are not downloading the applications Can u find out what's wrong? I use iPhone 5s

  I had the same problem. At the same time hold the screen lock button and the home button until your iPhone restarts. That solved the problem for me.

• I have 2 phones on my ID Apple how can I keep the two devices to receive the same iMessages?

  I have 2 phones on my ID Apple how can I keep the two devices to receive the same iMessages?

  How to use several devices iPhone, iPad or iPod with a computer

  Using more an iDevice on the same computer

  This mainly applies to couples who add another device and don't want their electronic mail, messages, etc. being duplicated on both devices. To start reading: How to use several iPhone, iPad or iPod devices with one computer. You must create a login separate Apple and password for anyone who will use the new iDevice. See Apple - my Apple ID and frequently asked questions about the Apple ID. The easiest way is to do it on the computer using iTunes: iTunes - how to set up an Apple ID iTunes.

  On the computer, create a new user account for the person with the new iDevice. This is the user account always uses this person. He or she will no longer use the other user account. This way the person will have a separate iTunes library. Note When finished, do not 'share' apps under a single Apple ID. Each of you must buy your own applications under your own Apple ID. When you decide to divide like this you will have to buy new applications they want to use.

  First, transfer the new devices to a new account as well as all your data.  Save pictures of flow picture you want to keep for your camera (unless they are already in the camera roll) by opening your Photos app, tap Albums icon at the bottom. Now press the album My Photo Stream; Press Select; tap the photo you want to select. tap the share (box with the face up arrow) in the lower left corner icon; in the film, and then click Save.

  If you synchronize notes with iCloud, you want to keep, you must open each of your notes and email it to yourself. Later, you can copy and paste the text into the new notes created in your new account.

  Tap Settings > iCloud > remove account (removes it only from this device, not iCloud; the person who maintains the current account is not affected) provide the password to disable find my phone and choose to keep on my iDevice when prompted.  Sign in with another Apple ID to create your new account. Choose merge to download your data.

  Once you are on separate accounts, you can each go to icloud.com and remove data from the other person to your account.

  The above was created by the user randers4. Changes were made to improve the readability and the syntax.

• Could a NI6008 be shared by two software programs at the same time?

  Hello

  I wrote two software with Labwindows/CVI for different purposes. Two of them are using NI6008. I have only one ni6008 attached to my laptop. I can run two programs at the same time? I mean, it's a NI6008 could be controlled by two different software at the same time? Thank you!

  Best,

  Shang

  Shang,

  There are four types of tasks, AO, DIO and counter. You can have one of each performer both on a USB-6008.

  Kind regards

  Kyle Mozdzyn

  Engineering applications

  National Instruments

• How to take snapshots of two usb camera at the same time

  Hello

  I have a project where I have to take still photos of two usb camera at the same time repeatedly and save the in a particular direcltory. I am received using a camera by using "Camera Grab vi", but I can't make it work with 2 cameras, I use the flat sequence and 2 "Camerra Grab vi: with particular camera in a sequence, but each time when I run the program I get only pic of a camera, its seems a camera dominates the other.»

  Please is it possible to use the two camera simultaneously. Attached are the snapshot of my vi.

  Thank you

  Ankit G

  Looks like you are using the same reference at the same time grabbing the camera. The two camera snaps happen but the second camera clamp is written on the first so it seems alone is slam. Try to run the VI executiong highlighted arbitrary mode (select icon icons four bulb to the right of the button run on the schema). This will allow you to see the data stream. In order to get both of these Snap you'll need separate references. You can try to watch one of our examples in the example Finder OR give you some direction (LabVIEW > help > find examples > Browse tab > Input and Output material > IMAQdx > high level > Snap.vi). You can break the two cameras at the same time if you just copy this code and double of the code.
  (Note: If you change the examples, always save as copy in another location so that you do not save on the packed example)

• Trigger two FPGA instances at the same time

  I have a basic FPGA code that transmits the bits of data on a serial (RS-485) bus, the code is written so that it expects in the first State of a machine to States in a single-cycle timed loop.  After a certain trigger, he begins to read a FIFO containing data and sends the data on a line of Tx.  It does this until all bits are send and then it goes back to the first State to wait for the next trigger.  The relaxation is necessary because windows must fill out first before the FPGA FIFO can start sending.

  I need two instances of this code runs, because I have two buses of com (one is redundant).  So I use the FPGA code as a Subvi and I wrote a main FPGA vi to call two separate instances of the Subvi in parallel.  A regular window vi wrote on the FIFO for bed FIFO for Rx and Tx.  No problems so far.

  The thing is I start two transmissions in 200nS of each other (Yes, nanoseconds).  Windows will write two FIFO in parallel, but the timing is 4uS apart, too long.  I tried implementing a Boolean flag in the Subvi FPGA, but windows can not write directly on the control of Subvi.  FPGA won't allow (the Write function is grayed out).  I tried to use a FIFO for a flag, but the problem is a race condition.  One of the instances is first read FIFO and he destroy.  The other can't read.  I need a common trigger point to be used by the two instances of Subvi.

  My final solution was to use a memory in the Subvi FPGA and digital control in the main FPGA vi.  Windows write in numerical order, it may because the control is in the main FPGA vi.  Inside the main FPGA, I run a timed loop that looks for digital to be zero.  If so, it writes the value into the location of the memory used by the Subvi FPGA.  After awhile, the principal wrote a zero back to memory to prevent the Subvi is restarted, as well as to write a zero for digital to reset.  This repeats, waiting for windows to write in digital again for the next transmission.

  I had to do it this way because sometimes I want to pass on the bus, and sometimes just one or the other.  Numeric values are used to determine which to pass on.  Now, the transmissions are starting to almost exactly at the same time, 1 or 2 nanoseconds apart.  But the trigger process seems very silly to me.  I was wondering if there is a better solution.  I'm pretty new to FPGA.

  tbob wrote:

  Basically, I did the same thing using FPGA memory.  Windows I am writing for a digital control that resides inside the main FPGA vi.  In the main FPGA, I write in the memory.  Inside the Subvi FPGA, I read the brief and decode the value to use either one or the other or both buses.  After fool with it for awhile, because reading Memeory needs to use a shift register (probably because it takes a whole cycle of clock), I had to work.  The two bus trigger at the same time.  I guess it's not really important if I use a FIFO or if I use the memory.  The main problem is that I write Windows at the hand of FPGA, then the hand of FPGA for the Subvi FPGA.  Then the time is right for what is the Subvi is.

  There are some advantages to the use of two FIFO on your approach.  First of all, you don't have the change of register for the memory location.  Secondly, we should not worry that VI is responsible for compensation to the memory location, or do, you run the risk that one of your subVIs run twice, or not at all, if the memory is not erased at the right time.  Perhaps most important, you'll save yourself space on the FPGA because you will not need arbitration - the additional code that is added when two parts of the FPGA try to access the same resource at the same time.  In your case, both instances of the Subvi access the memory block at the same time, so the FPGA compiler adds additional logic to avoid conflict.  If only read you the memory block in one place and just write it in one place (reading and writing can be different loops where subVIs) there is no need for arbitration.  Using two FIFOs, you can keep independent and avoid the conflict resolution code.  See the help for the "arbitration" for more details.

• Configure Manager node for the two areas in weblogic

  Hi friends,

  I'm kinda new to weblogic. I need help to configure nodemanager to two areas.

  I created two areas

  1 Classicdomain

  2 RPMdomain

  For classic field, I created the machine and all the server has added to this machine.

  MachineName: localmachine

  Port: 5556

  Plain

  For RPMdomain I created the machine with the same name and the port and all servers added to this machine.

  I registered both server using nmroll().

  First domain has been configured with nodemanager.

  In the second area, I am not able to start a stop managed server via the console.

  Could someone please let me know how to configure the nodemanager.

  Kind regards

  Prates

  Are able to launch those instances successfully from the command line using the command startManagedWeblogic.sh? Once you have started it, try stopping through the node Manager and then start it upward.

  Also, do you have JSSE enabled in your case and/or disabled hostname verification? These errors indicate fundamentally flawed SSL handshakes with the node Manager.

• A target table is in charge of two different sources but the same columns, but a source is one database and another in a flat file.

  We all hope you are doing well.

  I have a business problem to implement in ODI 11 G. It's here. I'm trying to load a target table from two sources that have the same column names. But a source is to the file format and the other is in the Oracle database.

  That's what I think I'll create two mappings in the same interface by using the Union between the sources. But I don't know how the interface would connect to different logical architecture to connect to two different sources.

  Thank you

  SM

  You are on the right track, all in a single interface. Follow these steps

  (1) pull model of your data in the designer of the source file and your table model target to the target pane.

  (2) all relevant columns map

  (3) in the source designer to create a new dataset and choose as the UNION join type (this will create a separate tab in the source designer pane)

  (4) select the new dataset tab in the source designer pane and pull your source oracle table data model in the designer of the source. All columns that are relevant to the target card

  (5) make sure that your staging location is set to a relational technology i.e. in this case the target would be an ideal candidate because it is where the ODI will organize the data from source two files and oracle and perform the UNION before loading to the target

  If you want to watch some pretty screenshots showing the steps above, take a look at http://odiexperts.com/11g-oracle-data-integrator-part-611g-union-minus-intersect/