Two fundamental questions in physics eve

Similar Questions

• Can I use NetMeeting to connect two computers in different physical locations using NetMeeting to dial a modem line with another computer

  original title: Microsoft Netmeeting

  Can I use NetMeeting to connect two computers in different physical locations but a local call using NetMeeting to dial a number to the other computer by a traditional dial-up 56K modem via telephone lines, (US Robotics ISA 56 K Win Modem kVoice) dialing the telephone number of the other person & their dial-up Modem too?  NetMeeting there software to do this, or do we need to use other software, downloaded or already in Windows XP?  Can we use NetMeeting on Windows XP Home Edition or XP Professional?  We do NOT want to go through the Internet, as our students do not have at this time of money to afford Internet connectivity.  . You want to use NetMeeting for tutoring purposes.

  Hi Rafael,

  Yes, you can use NetMeeting to connect two computers. Follow the steps in the article.

  How to turn on the feature Windows NetMeeting Remote Desktop Sharing in Windows XP Service Pack 2 or Microsoft Windows XP Tablet PC Edition 2005

  http://support.Microsoft.com/kb/878451

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/app_netmeeting.mspx?mfr=true

• Data Guard - allocation of licenses and other fundamental questions before setting it up.

  Hi all

  Please allow me to submit some questions about Oracle Data Guard.

  There are 2 databases 'authorized and ready ':

  -a single instance of the "alfa", Oracle Enterprise Edition 10.2 database,

  -"bravo", Oracle 10.2 Enterprise Edition, Real Application Clusters database

  I have to "align" congratulations to alfa on a daily basis, so that--in case of failure of the main 'alfa' site - recovery is possible change to the site "bravo."

  (1) even if we can afford a loss of data corresponding to the period little uttered at the end of the last daily alignment (no need to 'transactional' alignment between the two databases), I assume that the best approach to meet this need in terms of efficiency and manageability consists on two databases including in a Data Guard configuration.

  Am I wrong?

  (2) in particular, the physical implementation of the standby database must be preferred over logic, because that "simpler and faster" in this case. Am I wrong?

  (3) only the Data Guard configuration require

  (a) additional licenses?

  (b) additional material/software resources for host machines?

  (5) the release of two databases must be equal to the specific to the component version number (10.2.0.1, for example)? Or, for example, is a 10.2.0.1 able to work with a 10.2.0.3 db db in the Data Guard configuration?

  Thank you very much in advance!

  Marco mazzocchi

  Hello

  (1) even if we can afford a loss of data corresponding to the period little uttered at the end of the last daily alignment (no need to 'transactional' alignment between the two databases), I assume that the best approach to meet this need in terms of efficiency and manageability consists on two databases including in a Data Guard configuration.

  Am I wrong?

  You have reason, physical hosting it good thing. For the most part, you will get impact with until or unless data loss because of some problems of network (or a configuration problem)

  (2) in particular, the physical implementation of the standby database must be preferred over logic, because that "simpler and faster" in this case. Am I wrong?

  Logical standby is a little different from the physical standby mode

  (3) only the Data Guard configuration require

  (a) additional licenses?

  (b) additional material/software resources for host machines?

  Data features come with Enterprise Edition - perhaps for the active database "cost of the additional license.

  https://docs.Oracle.com/CD/E11882_01/license.112/e47877/editions.htm#DBLIC109

  (5) the release of two databases must be equal to the specific to the component version number (10.2.0.1, for example)? Or, for example, is a 10.2.0.1 able to work with a 10.2.0.3 db db in the Data Guard configuration?

  Good level to maintain the same level of oracle binaries / patches and still the support of heterogeneous DG

  -Pavan Kumar N

• Two part question about multicam sync and placement

  Hello.  I am a newbie to FCP, and I have a few questions.

  1. I have two camera angles and I was wondering if I can sync the audio manually (to exactly match the Visual part), because the automatic method using FCP is an a little off.

  2. question 2 - when I read the camera angles in the window, they are placed vertically.  Is there a way I can place them horizontally rather than vertically?  And a camera angle may be greater in size than the other, instead of being 50-50, it can be 70/30, for example?

  Thank you for your help.

  Is there a quick and easy way to do this?  Thank you.

• I NEED TO KNOW WHY THE _ THERE IS NO COMPATIBILITY FOR WINDOWS XP MODE 7 HOME PREMIUM EDITION. AND WHY HAVE WE NOT "WAGES" TO ASK FUNDAMENTAL QUESTIONS AFTER THAT WE PAID HUNDREDS OF DOLLARS FOR THE SOFTWARE?

  I PAID A LOT FOR NEW WINDOWS IN NOVEMBER LAST, AND I ARE NOT ELIGIBLE FREE SUPPORT?  THAT BREATH!  TEXAS INSTRUMENTS GOT GREEDY IN THE 1980S AND TOYOTA IS GOURMAND RECENTLY, NOW THEY'RE LOOKING AT BANKRUPTCY!

  SO MY QUESTION IS IS THERE A DEMO FOR LATER VERSIONS OF WINDOWS 7? BECAUSE I NEED OBVIOUSLY BUT XP COMPATIBILITY MODE I WANT TO BE 100% CERTAIN THAT THIS WILL FIX THE PROBLEM OF MY GAMES CRASHING THE SYSTEM WHICH REQUIRES A REBOOT.

  FOR MICROSOFT REAL, JUST HOW GREEDY YOU NEED BE?

  I ARE NOT ELIGIBLE FREE SUPPORT?

  If you buy retail (non OEM) then Microsoft generally taking care for the first two free incidents. Please consult the documentation provided with your copy of Windows 7.

  IS THERE A DEMO FOR LATER VERSIONS OF WINDOWS 7?

  I think that the only DEMO of Windows 7 available currently is approved specifically for the IT professionals. The demo lasts 90 days, but I "think" that Microsoft recommends that you be part of a company to participate. I don't know how they would feel if the average end user participated in the demonstration program.

  I NEED OBVIOUSLY BUT XP COMPATIBILITY MODE I WANT TO BE 100% CERTAIN THAT THIS WILL FIX THE PROBLEM OF MY GAMES CRASH THE SYSTEM

  I don't 'think' the XP COMPATIBILITY MODE in Windows 7 will help you a lot. I "think" it uses Para-virtualization, which is unfortunately too slow for almost all games. I was able to run some software in a virtualized copy of Win XP, but the software was not a lot of resources like computer games is.

  I am surprised that your games break in Windows 7. I run 32 Bit Win XP Pro SP3 here at home, but I have recently built a machine Windows 7 Home Premium 64-bit with 4 GB of RAM for my mother and it seems to work. My mother runs a Sims 3 and Sims 1 without problems, but Sims 2 gave here a few rendering problems that I don't think are associated with Windows 7.

  I recommend that players stick with Windows 7. Although there are other available operating systems, Windows 7 is probably the best operating system currently available to players. High compatibility and DirectX 10 + Support + 4 GB of RAM (or more) supported in Windows 7 Home Premium 64 Bit make Windows 7 a good set of OS. Trust the creators of the XBox of world-class, Super Sidewinder Joystick and high-speed Direct X technology.

  BTW: Now you can upgrade to Windows 7 Home Premium to Windows 7 Pro for only $ 90

  http://store.Microsoft.com/Microsoft/Windows-Anytime-Upgrade-Windows-7-Home-Premium-to-professional/product/C562285E

  Probably upgrade will not make your game better, but it will give you the possibility to have a safer computer.

  Final note:

  I wish Microsoft could release a Version of Visual Studio 2010 Standard... Who doesn't have my feathers ruffled a little because I can't see paying $800 for a compiler...

• Two screen question: Control Panel appears on the screen 1 but the mouse is on the screen 2 and so I can't access

  I have a Sony Vaio laptop connected to a stand alone monitor. I don't use the laptop screen unless there is a problem and then I had to alternate between the two screens using Fn F7 key.

  A problem has occurred with the rundll32 process (which I'm trying to fix separately) and this led to the PC automatically flicking between screens and then stick with the independent monitor but in low resolution (so I couldn't access the tool bar along the bottom).

  I went to control panel to change the resolution to high, but the question of rundll32 kept close the process.

  This left me with icons on the desktop of the monitor stand alone, a white color on the laptop screen (it is normally black) and the ease of Fn F7 does not (said the service is not available).

  When I click on Control Panel on the screen of stand alone, it opens on the screen of the laptop, but I can't access it because the function of the mouse is on the screen to stand alone.

  Can someone help before I go out drinking?

  Thanks, Temp.

  I seem to have solved the problem. It seems that display order has been reversed and so I just had to move the mouse to the right of the screen to stand alone (I had been pushing against the left hand side) to move on the screen of the laptop. From there on, I played a bit with the display settings in the control panel and, although the issue of the always kept dllrun32 throw me out, seems to be back on the screen of stand-alone only, with the correct resolution and the Fn f7 works again. This means I can put the top back on bottle of vodka, at least until the next issue of dllrun32 arises.

• GTA IV is impossible to install! two different questions!

  were already 'installed' game but does not start.

  so I click on the CD and it begins to start. Then a white pop up screen says "Grand theft auto IV is put in place.

  "Welcome to the grand theft auto iv installation process. Grand theft auto iv pc requires installation of the software, including social club of rockstar games, sony DADC SecuRom, adobe flash, microsoft .NET framework, games for windows live, internet explore and direct x. To play GTA IV online, you needand account with all two windows live and social club of rockstar games. to review the software requirements and information, please visit www.rockstargames.com/support
  * bottom of pop-up (two buttons)
  1 Social Club.) launch
  (exit 2).
  I click on launch social club
  3 things can happen
  1.) nothing
  (2.) it brings me to a black pop up screen that looks like the screen prompt command followed by an error message "error ws10 fatal."
  3.), it brings me to the social club where I can press play but nothing happens.
  I need a walkthrough COMPLETE including the resettlement of the disc. (no steam)
  Thank you and I hope that I have been descriptive enough

  Yes, GTA4 was the worst conglomerate of DRM never, until that time.
  -You need not log in to the Social Club. I'm not positive, but I don't think that it is still running.
  -You want to patch the game, but I do not remember how, so check with the forums
  specific to GTA4 to see if you should go beyond say patch 1.5.
  -The 1.5 patch, I thought was supposed to remove Social Club, but I still have the pop-up window
  before I tell him to go away.
  -The game also needs a fix for GFWL.  I think remember me stuffing things GFWL upward and obtaining of
  the fix is fairly common. GTA4 modding sites have a fix called xliveless.dll for this.

  -If you have a graphics card with / 3GB (maybe 2 GB) or more of RAM you must also create a file to force
  the game to accept this time has evolved and is more than 1 GB VRAM on video cards
  possible. It is a command line text and it goes like this.
  Open Notepad and type (or copy and paste) the following-
  (adjust the first two native resolution on your monitor if you want).

  -width 1920
  -height 1080
  -nomemrestrict
  -norestrictions
  availablevidmem - 6.0

  -Save as commandline.txt and place it in the main installation directory of games with the GTA4.exe.
  You may not need the trouble resolution with the command "nomemrestrict", but that the...

  If you are installing somewhere other than the default location - Program Files (x 86) - it can help.
  It is generally more beneficial to avoid permissions issues, but it can sometimes help with
  other questions.
  Another partition or a drive HARD is good, but a new folder in C:\ with your games installed in their own
  subfolders is OK too.

  Specific GTA4 forums can produce more suggestions.

  .

• Two quick questions (hopefully) - right way to dynamically change the CSS class and put of Splash screen implemented

  Couple of quick questions have left me speechless!

  So, it seems obvious that many JavaFX applications want to dynamically change the CSS styles.  Is the best way to do it through la.getStyleClass () .add ("classname") < node >?  The underlying data structure is a list of observable.  So let's say we have 5 styles that simply to change the fill color of a circle of 5 different colors, respectively.  So if I have a condition in which I want to dynamically apply 1 of these 5 styles, as I do now it's by setting all 5 styles as a string in a list by using a static initializer, then I call < node > .getStyleClass () .removeAll (list), then getStyleClass () .add ("classname").  I do this to avoid adding again and still the same style and inflate the underlying list.  What is the right way to manage dynamic CSS styles?

  Finally a very simple I think.  So I know there's a little differently to implement a splash screen.  My app has certainly got bigger in the last few months of development and I noticed there are about a 5 second delay between when I run the application when I see the main stage.  I was thinking what a splash screen would be nice to fill that time.  I had no time to prototype using a Preloader and I fear that using another, early stage start-up again would be too long of a delay.  "I actually thought that using the Nice and simple JVM argument" - splash: image name > "would be simple, easy and effective.  Unfortunately when I try to do, the splash screen appears but never goes away.  Anyone know what is happening with this?

  Your mechanism to manage the css style classes is a good approach; I've used several times. I wonder why the style classes have been implemented as a list, instead of a game, but there may be cases of good use for the use of a list.

  In some cases you can also consider using CSS PsuedoClasses, which were presented in JavaFX 8. Here is a little easier to use, especially if you have two options. But a use case might look like:

  public class Message {
      public enum Status { NORMAL, WARNING, CRITICAL }
  
      private final ObjectProperty status = new SimpleObjectProperty<>(Status.NORMAL);
      private final StringProperty message = new SimpleStringProperty();
  
      // constructor, getters, setters, and property accessors....
  }
  

  public Label createLabel(Message message) {
      PseudoClass warning = PseudoClass.getPseudoClass("warning");
      PseudoClass critical = PseudoClass.getPseudoClass("critical");
  
      Label label = new Label();
      label.textProperty().bind(message.messageProperty());
      message.statusProperty().addListener((obs, oldStatus, newStatus) -> {
          label.pseudoClassStateChanged(warning, newStatus == Message.Status.WARNING);
          label.pseudoClassStateChanged(critical, newStatus == Message.Status.CRITICAL);
      }
      return label ;
  }
  

  And then your css looks like

  .label:warning {
      -fx-text-fill: orange ;
  }
  .label:critical {
      -fx-text-fill: red ;
  }
  

• Build dataguard two other questions. password prompt and certificate error

  Instances of guard fiirt two data are built. It carries out the second I get this error in the log of all alerts. It seems that it is a certificate error, but I'm having a hard time nailing down.
  
  BTW: Instance is 11.2.0.1
  
  Thread 1 Advanced to record the sequence 318 (switch LGWR)
  Currently Journal # 6 seq # 318 mem # 0: +DATA/sfs01/onlinelog/group_6.4762.769266689
  Client SSL: Server DN does not contain name of SID WHEREAS
  Archived journal 706 extra for each thread 1 317 0x799622d4 dest ID sequence entry 1:
  Thu Mar 22 12:46:48 2012
  Client SSL: Server DN does not contain name of SID WHEREAS
  
  The third and final instance of data hold I build is 3 t and holding still to be restored. Two questions:
  (1) can I suspend rman and restart it.
  (2) when I restart rman how I stop it all asking me to specify the password. I'd rather put a nohup on a shell script.
  
  Here's the script. Right now I am running it manually but would relly to run with nohup so I can go to lunch.
  
  RMAN target auxiliary SYS@sor01_primary / < < EOF
  Run {}
  allocate channel C1 device type disk;
  allocate auxiliary channel C2 device type disk;
  allocate auxiliary channel C3 device type disk;
  allocate channel auxiliary type C4 drive peripheral;
  allocate auxiliary channel C5 device type disk;
  target database double standby nofilenamecheck;
  C1 output channel;
  channel C2.
  output channel C3.
  output channel C4.
  output channel C5;
  }
  EXPRESSIONS OF FOLKLORE

  Ok

  Therefore, this

  RMAN target auxiliary SYS@sor01_primary

  Would be more like this

  RMAN target sys/password@PRIMARY auxiliary.

  You should be able to pre-test to the command prompt.

  Then hard-code in a shell script.

  Best regards

  mseberg

• A fundamental question about archiving

  Versions: 10.2, 11.1, 11.2
  Platforms: Unix, Unix-like
  
  This isn't a specific question Dataguard. But I thought it would be the best response data experts warn.
  
  I have a DB in Archive log mode. It has 3 files redo log (file1, file2, File3)
  

  file1
  
   |----------------> file1 got full, LGWR starts writing to file2
   |
   V
  
  file2
  
   |----------------> file2 got full, LGWR starts writing to file3
   |
   V
  
  file3
   |----------------> file3 got full, LGWR starts the new cycle and starts writing to file1

  Journal of archiving of the file1 will be created as soon as LGWR began writing in File2 or only when the new cycle starts it IE. When the last rebuild (file 3 in the example above) of the group got full and LGWR begin in writing a file1?

  Journal of archiving of the file1 will be created as soon as LGWR began writing in File2 or only when the new cycle starts it IE. When the last rebuild (file 3 in the example above) of the group got full and LGWR begin in writing a file1?

  Hello

  What you say, correct, its a CYCLICAL once file3 archived then it goes again to a file1
  Here one more point, once the redo log file is full when it is archived , then only it will start writing in file2

  How Oracle database written in the Redo Log

  Log roll forward of a database consists of two or more redo log files. The database requires a minimum of two files in order to ensure that one is still available for writing, while the other is more archived (if the database is in ARCHIVELOG mode). For more information, see "Managing archived Redo Logs".

  LGWR writes redo logs in a circular fashion. When the current redo log file fills, LGWR begins writing in the redo log file available at the following address. When the last log file available redo is full, LGWR revisits the first restoration of progression and writes log file, starting the cycle again.  the circular writing redo log file. The numbers next to each line indicate the order in which LGWR writes into each redo log file.

  I mention only one link, here you can see the image how to rebuild cycling works.

  http://docs.Oracle.com/CD/B19306_01/server.102/b14231/onlineredo.htm#i1006187

  Thank you.

• recent switcher FCP w / two small questions

  Hey guys. New convert to the first CS6 of FCP 7. Overall, the switch is OK, but two things me are shifted upward and I was wondering if there might be easy solutions, I'm just missing. I tried to search but they are few enough specific questions and I have not been able to find something, so I was hoping someone here might be able to help.

  (1) crash when pushing. Pushing a lot in FCP (and Avid before that), I used (i.e. use ">, < ' keys to move a clip frame by frame when selected, or option + ' > / < ' first). Here's my problem: in Avid and final cut PRO when you uttered a clip to the point that it struck another clip on the track, the repositioning would stop. Meanwhile, in the first, the selected clip continues going, replacing the clip not selected by the selected. Which is annoying for me. It was nice to know the program had my back and would prevent me from when I would hit a wall vs duty sctrutinize each time to make sure I'm not crush something. Is there a way to change this replaces the behavior of the function of boost in first. Or it's just something I have to get used to?

  (2) the deselection of individual clips when using track selection. Sometimes when you use the track select to select all the clips before or after the playhead, you accidentally select a track that you don't want to move (like a piece of music bg). FCP, I could order just click on this specific item to turn it off and all the rest would remain selected. Meanwhile in the first he does not seem to change the selection of the track once you did. Am I missing something? Or is it just another difference that I'll have to get used to?

  Thanks in advance.

  brarble wrote:

  Hey guys. New convert to the first CS6 of FCP 7. Overall, the switch is OK, but two things me are shifted upward and I was wondering if there might be easy solutions, I'm just missing. I tried to search but they are few enough specific questions and I have not been able to find something, so I was hoping someone here might be able to help.

  First of all, as a former editor-in-Chief of the FCP myself, you will find that everything is in the same way. I trained on Avid, Media 100, final cut PRO, and now Premiere Pro. If you went on the road, I did, you will find a number of things just doesn't work the same way and you will have to live with the differences. That said, if you want to change anything, you need to make a feature request: http://www.adobe.com/go/wish

  brarble wrote:

  Hey guys. New convert to the first CS6 of FCP 7. Overall, the switch is OK, but two things me are shifted upward and I was wondering if there might be easy solutions, I'm just missing. I tried to search but they are few enough specific questions and I have not been able to find something, so I was hoping someone here might be able to help.

  (1) is there a way to change this replaces the behavior of the function of boost in first. Or it's just something I have to get used to?

  You will have to get used to. What you might try is to close the gap and then move backward.

  brarble wrote:

  (2) the deselection of individual clips when using track selection. Sometimes when you use the track select to select all the clips before or after the playhead, you accidentally select a track that you don't want to move (like a piece of music bg). FCP, I could order just click on this specific item to turn it off and all the rest would remain selected. Meanwhile in the first he does not seem to change the selection of the track once you did. Am I missing something? Or is it just another difference that I'll have to get used to?

  Try Shift + click instead of command + click.

• OK, fundamental question of ORA-01031

  Very basic question here, but I'm stumped.
  
  I have two databases
  
  1 database is 10.2.0.4
  
  Database 2 is 10.2.0.5
  
  
  In the two databases, I have
  F860 user
  The user F861
  Role F860ADMIN
  
  In the two databases, I log in F861 and create a simple table with two columns VARCHAR2 in TESTGRANTS
  In the two databases connected under F861, I have grant SELECT, INSERT, UPDATE, DELETE on TESTGRANTS to the F860ADMIN role
  In two databases, the role of F860ADMIN was granted to the user F860
  
  In the 10.2.0.4 database, when I connect to F860 via SQL * MORE and run SELECT * FROM F861. TESTGRANTS; It works
  
  In the 10.2.0.5 database, when I connect to F860 via SQL * MORE and run SELECT * FROM F861. TESTGRANTS I get:
  ERROR on line 1:
  ORA-01031: insufficient privileges
  
  
  In the 10.2.0.5 database, I rechecked that F860ADMIN currently has the SELECT, INSERT, UPDATE, DELETE privilege on F861. TESTGRANTS and I checked that F860ADMIN is granted to the user of F860.
  
  Anything else anyone can think?

  Maybe the role is not enabled by default. Check the roles enabled with:

  select * from session_roles;
  

• Two beginner questions

  Hello!
  
  I have two questions about flash.
  
  1: is deprecated tellTarget?
  2: what is flash MX, do I if I have flash 8 Professional?
  
  
  Thanks in advance
  
  Well

  Quote:
  1: is deprecated tellTarget?

  Yes. Very.

  Quote:
  2: what is flash MX, do I if I have flash 8 Professional?

  Flash MX is version 6. Flash 8 is the most recent. 2 versions after.

• Two newbie questions

  Hi all!
  I'm one step away from the Widget Download thirty day Dreamweaver 8, intend to buy it at the end of the trial, and I have two questions.
  
  First dilemma: when and if I buy (very likely), I have the CD. There will be a problem, do it this way (IE that just overlap the buggy test with CD version)?
  
  Second problem: while I am an avid user of Photoshop, Illustrator and InDesign, I noticed that the textbooks have become less useful, particularly with CS. For example, in Illustrator with the toolbar of the chain, the manual refer to the online help, and when you go there, you will find very little aid - no info on what are the settings for each tool. Is it with Dreamweaver, and if so, what is the ideal, perfect, handles-it-all, can't live without this manual?
  
  Look forward to answers.

  The buggy IS the CD version. The fair trial give your S/N of the CD
  and you are off the coast and running.

  > Is this, with
  > Dreamweaver.

  Yes, more or less. Although there are links to documents directly on the web, which
  are like a wikipedia...

  > and if so, what is the ideal, perfect, handles-it-all, can't live
  > without this manual?

  It is not really one, but I like Dreamweaver 8 by David McFarland: the
  Missing Manual (caution - I tech edited, so I'm having an affair with)
  him and this book). Plus, I love to read his latest "CSS: The Missing."
  Manuel"and while it is not DW-centric, it is very good (AND, it reverses
  some of the blatant misinformation provided in Chapter 8 of the
  (former).

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "Binnekill" wrote in message
  News:efj0j4$EVK$1@forums. Macromedia.com...
  > Hi all!
  > I'm a not far from downloading the thingy, thirty days in Dreamweaver 8
  > intend
  > to buy at the end of the trial and I have two questions.
  >
  > First dilemma: when and if I buy (very likely), I have the CD. Will be
  > There have a problem doing it this way (IE that just overlap the buggy to test with)
  > the CD
  (> version)?
  >
  > Second problem: while I am an avid user of Photoshop, Illustrator, and
  > InDesign, I noticed that the manuals have become less and less
  > useful.
  > particularly with CS. For example, in Illustrator with the warp tool bar.
  > the
  > Manual you refer to the online help, and when you go there, you will find
  > very
  > little help - no info on what are the settings for each tool. Is this true
  > with
  > Dreamweaver and if yes, what is the ideal, perfect, handles-it-all, cannot
  > live
  > without this manual?
  >
  > Looking forward to responses.
  >

• None of 'items' addresses the fundamental question: How can I see my favorites? Q &amp; A are useless!

  I used to have a bar at the top of Firefox, where I could shoot down my bookmarks menu. Who has disappeared. Ask "where are my favorites?" lead to useless as answers "how to bookmark a page." It has been suggested to click on the menu icon (you have to guess what the top of 3 bars right) and click on the bars to view menu, or something like that. problem is, there is no option in this menu. Who is responsible for screwing up what used to be a very user friendly browser? I might have to go back to the Solution Explorer, not a happy prospect. Firefox, you pay attention?

  Hi BarryB, in the window menu, down, there is a Customize button. When the Customize dialog box opens, along the bottom, there is "show/hide toolbars.

  4 balls are two different ways to do the same thing, so if the two do not work for you, try the other.