XW6400 problem two processors with four cores

Similar Questions

• Can I put my HP dx2300m processor with four cores?

  I have a HP dx2300m, his original processor is Core 2 Duo.

  Can I upgrade the processor to Quad Core?

  My apprehension is all about power and if works perfectly.

  Hello:

  Here is the link to the quickspecs for your dx2300 Mt.

  Supported processors are listed on page 4.

  http://h18000.www1.HP.com/products/QuickSpecs/12668_na/12668_na.PDF

• Any version later than version 4.2 which correspond to two-processor PC Palm TX?

  I manage to synchonyze Palm TX with desktop PC by USB cable: it has never been easy to get a connection and recently it became impossible. I tried a new adapted version but c. 6.2 requirements says it is not compatible with the dual processors for PCs, which is the case, and I found no other version newer than mine.
  Could someone suggest an adapted most recent version or a patch to the connection by USB cable problem?
  Thank you.

  You have two processors, or dual core?  No problem, and has been a common misconception by many users.

  Have you tried the Aceeca drivers?  They will fix compatibility issues with 64-bit operating systems.  See the "64-bit Windows USB drivers for Palm Desktop' thread at the top of this section.

  WyreNut

• Two processors listed in device of my Satellite A200-1MD Manager

  Is of my Satellite A200-1MD, on the device, manager by clicking on the processors opens two processors (for my two processors).
  One is "Intel (R) Core (TM) 2 CPU T5300 @ 1.73 GHz
  the other is "Intel (R) Core (TM) 2 CPU T7200 @ 2.00 GHz

  IS IT NORMAL TO HAVE TWO PROCESSORS WITH DIFFERENT SPEEDS!

  Is there a problem with my driver software or what? Keeping in mind that when I click SYSTEM in Control Panel it shows me that the processor is T5300 1.73 GHz 1.73 GHz.

  I need to know if there is a problem with my laptop, because I think that she was not working fast enough.

  Yes, it seems this is a common problem of Vista.
  At first my laptop L30 CPU is recognized as two different processors with different speeds.
  You must remove the CPU of the Device Manager and have to restart the laptop.

  After reboot new and new CPU Device Manager installation displays the correct speed ;)

  Best regards and don t forget to assign ;) reward points

  Happy new year dude

• Free version of ESXi 4.1 CPU with 8 cores

  Hello

  I would like some advice on the question of whether the free version of ESXi 4.1 supports servers with 4 CPU core CPU 8, because I find some contradictory documents on some he said supports only 6 core CPU and not 8. Can someone advise or confirm.

  I think the EULA may need to be clarified.  If we ignore free ESXi for awhile, this document - https://www.vmware.com/download/eula/multicore.html - suggests that it's OK to run vSphere Standard for example on processors with 12 cores.   I only give 2 CPUs per physical CPU licenses as each license would cover only 6 of the 12 hearts.  Here is the example that includes the document

  > Example: A customer has already purchased vSphere Enterprise license. Remember that each license of vSphere Enterprise can be deployed on a > processor with up to 6 cores. However, the customer now wants to use these licenses on a newly acquired server with processor with 12 cores. > The client has two options:

  > Upgrade from the company of vSphere vSphere Enterprise Plus license, which provides a right to 12 strands and extra GOLD

  > 2 two vSphere Enterprise licenses for each processor with 12 cores.

  It would not appear that vSphere 6 basic editions are hard coded to ignore carrots on it 6 but rather you must just the correct license in place.  With ESXi free since you can register an unlimited number (99 I think?)  processors and in essense, you have enough licenses processors to double for each physical processor.  It would not be what they want and it can be "fixed" in the future, but I'm not sure it would be a EULA violation vSphere.  The doc covers products 'vSphere '.

  This affect which products VMware?

  > This strategy affects the VMware vSphere products i.e. vSphere Essentials, vSphere Essentials Plus, vSphere Standard, Enterprise vSphere, vSphere > advanced and vSphere Enterprise Plus

  so maybe they need to clarify their position for free ESXi.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• Two actions with a single button Oracle adf

  Hello
  Dear all,
  I want two action with a single button. Before posting, I studied this thread, but it seems that it cannot solve my problem two actions with a single button?
  It's my button and its action http://4.bp.blogspot.com/-tpP5wIW8JLI/T66zhLZgG0I/AAAAAAAAAPY/F1A-Ka8KGPY/s1600/req1.JPG
  getReqID button is actually a call to a procedure that returns a value to his class of action. The cb1_action function is...
  public String cb1_action() {}
  BindingContainer links = getBindings();
  OperationBinding operationBinding = bindings.getOperationBinding("getReqID");
  Object result = operationBinding.execute ();
  int id = Integer.parseInt (result.toString ());
  System.out.println ("result =" + id);
  If (! operationBinding.getErrors () .isEmpty ()) {}
  Returns a null value.
  }
  Returns a null value.
  }
  It works very well. Don't know I want to, click this button, it also opens a page of .jsff. but I'm unable to open this page.
  Help, please
  Thank you
  Muhammad Nasir

  The first image you provided shows a small 'Attention' sign on the "request for quote-global-TF" which, I guess, gives you the sentence.
  This warning tells you that there is a problem with the task flow that you imported from the pot. Move the mouse over the warning sign a see what message you get from the frame on the error. If you don't get one, in 'source' view and look for red or orange squares in the gutter of the right hand. Scroll to the position of the red square and move the mouse over the underlined part red or orange of the code.

  Timo

• Two-processor Multi Core processing Parrell Question

  Normal 0 false false false MicrosoftInternetExplorer4 / * Style Definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-parent:" ";" mso-padding-alt: 0 cm 0 cm 5.4pt 5.4pt; mso-para-margin: 0 cm; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman"; mso-ansi-language: #0400; mso-fareast-language: #0400; mso-bidi-language: #0400 ;} "}

  Hey guys

  I'm looking for a little clarification on an issue with parrell treatment in LabView. If I have a dual processor with two 4 core CPU computer will be able to access all 8 cores in the LabView environment. I presume he can use carrots that can see the operating system?

  Thanks for the help,

  Tom

  Norbert B has written:

  It is the work of the operating system that applications may use all of the hearts, if necessary. So for the application itself, it should make no difference if the system (hardware) is MultiCPU, multicore, or even simply Hyperthreaded...

  Norbert

  It's true, but I would like to add my 5 cents here.

  Lets say, if you have a simple loop like

  While (true) {}

  do something

  }

  then OS will get a chance to run in multiple threads. So you get max 12.5% CPU load to 8 core PC or 50% max on dual core PC.

  I have dual core PC now and allows to check:

  

  Thus, as we can see - 50% CPU load reached (a single core charge more, but its a different story).

  Well, if we are going to use two while loops, then we will get 100% load:

  

  Of course, if you need to load all 8 cores, you should have 8 parallel loops.

  Compare BD above with the following:

  

  We have two functions of minmax table and they independently, but we have only 50%.

  Well, you can get also the 100% CPU utulization inside while loop. In th example below, you have two sub - VI, who called in the same loop:

  

  Here we have 100%. Important, these screws must be reenterant!

  See what happened if they reeenterant not:

  

  Now a little about the Vision. Most of the SubVIs Vision behind are DLL calls. Some features of Vision already optimized for the multicore performance. For example, the convolution:

  

  On the comic above, we have a simple loop with a Subvi, but two cores are used (convolute itself already optimized for the core multi car).

  Remember, not all functions of Vision optimized yet. For example, low-pass still single-threaded (compare this BD BD above):

  

  Of course, we can use multi hearts - just perform a parallel execution (you must split the image for both parties, and then to unite and so on):

  

  Remember, SubVIs must be reeentrant, and all calls DLL must be thred safe (not in the UI thread). Also good idea to stop debugging in such experiences to eliminate the additional CPU load.

  Another point on 8 cores. As far as I know, LabVIEW (and application on LabVIEW) will support only 4 cores within a default delivery system (at least before LabVIEW 2009). If you have need for all 8 cores, then you must add a few lines in LabVIEW.ini. See the thread next where you can find more details:

  Interpolate 1 d slow on computer 8 hearts

  Hope that everything written above was correct.

  Thanks for reading and best regards.

  Andrey.

• Only one CPU is getting detected on HP Prolian DL580 with two processors

  Hello

  I have a HP Proliant DL580 server with two physical processors.

  Connected to the ILO and I see two processors detected. Please see screen Capture 1

  Installed ESXi 5.5 and allowed Enterprose plus on my server. But I only see a single CPU detcted. Please see screen shot 2

  Is it possible that I can get the two processors detected in ESXi?

  -Thank you

  Suresh

  Your Dell r.620 has 2 processors as well.

  2 processors to 6 cores per processor, up to 12 physical cores. With Hyperthreading, it comes to 24 logical cores

• I have an iMac7, 1 with Intel Core 2 Duo 2.8 GHz, 2 GB memory, 500 GB storage, iOS10.6.8 and can update in 10.11.2.  must I do cela or are there problems with the upgrade?

  I have an iMac7, 1 with Intel Core 2 Duo 2.8 GHz, 2 GB memory, 500 GB storage, iOS10.6.8 and can update in 10.11.2.  must I do cela or are there problems with the upgrade?

  I don't know about other issues. There are always 'problems' with any upgrade. You weigh against the benefits. I know that you need more RAM. At least 4 GB, maybe more if you can. Don't forget that this system is produced at a time when most of the machines have + 8 GB RAM and when Apple said 'minimum' they really mean it.  I recently inherited a MacBook that has 2 GB of RAM and the Mavericks. When I checked the memory, the use of the system was using 1.95 GB = nothing to run applications!

• What is the difference of ORACLE for a 16 processor machine and 1 cpu with 16 cores?

  What is impact performative to ORACLE running on a machine of 16 processors comparison 1 cpu with 16 cores?
  
  No difference? but maybe something I don't know...

  I assume you mean the Sun T2 based servers?

  See http://blogs.sun.com/glennf/entry/virtual_cpus_effect_on_oracle

• Is there a CS2 for an iMac with Intel core duo processor, 2006?

  I have an imac of 2006 with Intel core duo running on OS 10.6.8 (snow leopard) and I can not install any later operating system on my computer.  Is there a version of Photoshop, I can install it on my computer?  I can buy an unopened, full retail install version CS2, but the specs say that it is only good on a Mac to be able to.  I find no indication than ever, there is a version of Intel - what are my options?

  .. before someone suggests I buy a new computer, I'll put it simply: Yes, I know that my computer is a dinosaur. I can't buy a new computer for the moment.

  Thank you!

  I can buy an unopened, full retail install version CS2, but the specs say that it is only good on a Mac to be able to.  I find no indication than ever, there is a version of Intel - what are my options?

  There is no Intel of CS2 version. It's only PowerPC.

  That said, OS X 10.6.8 can run PowerPC applications but only if Rosetta is installed. Rosetta is not installed by default on Snow Leopard.

  Relocation of Rosetta | Macworld

  That said, you are only entitled to use the CS2 without activation link above if you already have a CS2 (or earlier version) license.

• the Device Manager shows two processors

  My laptop Pavilion dv9543cl Device Manager indicates that there are two, rather than Intel Core 2 Duo CPU 7300 @ 2.00 GHz processors. It is clearly in original condition (i.e., HP Windows Vista, 32-bit with chips of memory 2 x 1 GB.) How should I treat this problem?

  Hello

  wilwon32 wrote:

  My laptop Pavilion dv9543cl Device Manager indicates that there are two, rather than Intel Core 2 Duo CPU 7300 @ 2.00 GHz processors. It is clearly in original condition (i.e., HP Windows Vista, 32-bit with chips of memory 2 x 1 GB.) How should I treat this problem?

  This is quite normal.

  The following image shows the PC that I use as a PC ACPI x 86 two processors. The two processors (Cores) are on a single chip which is the Intel Core 2 duo processor.

  

  Best regards
  ERICO

• Intel E5300 E7400 processor vs duo core?

  I am to evaluate where to put my money with a new computer "exactly."  As I evaluate each component, I wonder whether to go standard or upgrade.  I am now to the question of the processor... ideas?  I would use the computer for regular MOM stuff, but my children will play the Sims 2 on it.  Any input?  Thanks in advance...

  Lori

  Hi Lori,

  Looks like you are looking for a desktop PC.  Is this fair?  I think you'll be fine with a processor.  Specification of the game says you need a processor clocked at 1.8 GHz or higher (2.4 GHz for Vista).  It said the two processors to meet this requirement.  The E5300 is clock speed 2.6 GHz.  The E7400 is 2.8 GHz.

  I would lean towards the E5300 however.  I would like to buy a minimum of 2 GB of RAM.  Maybe 3 GB RAM for Vista.  And maybe get a dedicated video card.  For e-mail, web browsing, word processing, banking online, either CPU should be fine.

  Here are just a few notes on your question.

  For Intel processor Pentium E5300 here look specifications:
  -http://tinyurl.com/mwcus5

  For Intel processor Core 2 Duo CPU E7400 here look specifications:
  -http://tinyurl.com/mcyczw

  It's a more difficult question for me to answer because of the fact that they are in families of different processors.  One is a Pentium and the other is a Core 2 Duo.  But both have two hearts.

  If you are interested here are Intels reason for upgrading to a Core 2 duo processor:
  http://download.Intel.com/products/processor/Core2Duo/desktop_prod_brief.PDF

  The minimum system requirements for The Sims 2 Apartment Life is as follows:
  * The Sims 2 base game (The Sims 2, The Sims 2 Deluxe, the Sims 2 Double Deluxe, The Sims 2 DVD special edition or the Sims 2 Holiday Edition all contain the base game)
  * 1.8 GHz or higher (2.4 GHz for Vista)
  * 1 GB OF RAM
  * Windows Vista, Windows XP, Windows ME, Windows 98 or Windows 2000
  * 8 x or more fast CD/DVD drive for the physical version
  * At least 1.0 GB of hard disk space additional (total of 5.0 GB is required if you install the Sims 2 and The Sims 2 Teen Style Stuff at the same time).
  * A T & L compatible video card with at least 32 MB of RAM video.

  Personally, I'd put your money in addition to RAM since Vista can always use more memory.  But I don't think that you will have problems with a processor to play Sims 2.

  Wait and see what offers other people.

• System has two processors, but windows detects one.

  Hello

  I have a HP Pavilion p6-2100.  The windows Device Manager is displayed two processor but when when I type systeminfo.exe to command prompt its only showing a.  Something misconfigured?

  C:\Windows\System32>SystemInfo.exe

  Host name:
  Name of the operating system: Microsoft Windows 8.1 Pro with Media Center
  OS version: 6.3.9600 n/a build 9600
  OS manufacturer: Microsoft Corporation
  OS configuration: Standalone Workstation
  OS Build type: multiprocessor Free
  Registered owner:
  Registered organization:
  Product ID: 00261-70000-00000-AA439
  Original installation date: 10/09/2014, 19:18:09
  Starting system: 24/09/2014, 15:47:53
  Manufacturer: Hewlett-Packard
  System model: p6-2100
  Type of system: PC x 64
  Processor (s): 1 processor installed.
  [01]: AMD64 family 18 model 1 Stepping 0 AuthenticAMD
  ~ 2800 Mhz
  BIOS version: FRIEND 7.15, 16/12/2011
  Windows directory: C:\Windows
  System directory: C:\Windows\system32
  Starting device: \Device\HarddiskVolume2
  Local system: en - us; English (United States)
  Input locale: en - us; English (United States)
  Time zone: (UTC-05:00) Eastern (U.S. & Canada)
  Total physical memory: 7 155 MB
  Available physical memory: 5 307 MB
  Virtual memory: Max size: 14 323 MB
  Virtual memory: available: 12 356 MB
  Virtual memory: in use: 1 967 MB
  Office (s) swap file: C:\pagefile.sys
  Domain: workgroup
  Logon server: \\MicrosoftAccount
  Corrections: 65 fixes installed.
  Network adapters: 3 interconnect installed.
  [01]: Realtek PCIe GBE Family Controller
  Login name: Ethernet
  DHCP enabled: Yes
  DHCP server: 192.XXX. X.X

  IP addresses
  [01]: 192.XXX. X.X
  [02]: fe88::2012:858 d: 9b3e:6bd9
  [02]: 802.11n wireless LAN Card
  Name of the connection: Wi - Fi
  Status: Media disconnected
  [03]: V9 adapter FAUCET-Windows
  Name of the connection: connection to the Local network
  Status: Media disconnected
  Requirements for Hyper-V: VM Monitor Mode Extensions: Yes
  Virtualization enabled in Firmware: No.
  Second floor address translation: Yes
  Data Execution Prevention available: Yes

  C:\Windows\System32 >

  

  Hello

  No, it has only ONE such processor stated on his page

  HP Pavilion p6-2100 Desktop product specifications

  A single processor but TWO cores (or dual-core)

  Kind regards.

• Why do two files with half of the songs on the album in one and the other half to the same album

  When I download an album place it in my folder of music, and then to the Media Player update the album information I have two albums of the same name in media player with four titles in and the other with seven titles and all tracks are from the same album...

  Hello

  You can re-create the database of Windows Media Player and see if that fixes the problem.

  To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:
   
  a: Exit Windows Media Player.

  
  b:  Click Start, type %LOCALAPPDATA%\Microsoft\Media Playerand then click on OK.
  
  c: select all the files in the folder and then click on Delete on the file menu.

  Note You don't have to remove the folders that are in this folder.

  d:  Restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

  
  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:
   
  a: the release of Windows Media Player.
  
  b: click Start, type %LOCALAPPDATA%\Microsoftand then click OK.
  
  c : select the Media Player folder and then click delete on the file menu.
  
  d: Restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

   
   
  Hope this information helps.