Two simultaneous network connections

Similar Questions

• Simultaneous network connections twenty Windows 7/8

  I find it incredibly difficult to get a simple answer to this question about the limitation of 20 connections of devices on a windows 7/8.

  Here's the scenario...

  Main computer will run Windows 7 Pro

  This computer will be several network printers and Apache Web server actions

  Ten other computers in the office, each running Windows 7 Pro

  They all will connect to the main computer with the following:

  X drive is mapped to a network share on MainComputer

  -The drive is mapped to a network share on MainComputer

  -My library of Documents will point to \\MainComputer\SharedDocuments

  -It will be printed on a printer shared on MainComputer

  -They use a web browser pointing to http://maincomputer

  NOT this NUMBER as a connection to the MainComputer of each of the ten for a total of ten connections?

  Or is it a different number of connections?

  Help, please. We do not want to use a platform server unless absolutely necessary.

  Thank you

  Tim

  Hi Tim,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  Forum TechNet Windows 7

  TechNet Windows Server Forum

  Forum TechNet Windows 8 and 8.1

  Hope this information helps.

• How to make a route between two routers (networks) connected to the same switch?

  Hello guys, how are you?

  In my company, we have 2 internet routers more dsl router of data connected to 1 switch line

  the data row is used to connect the branches of our company together for network problems.

  the router 192.168.2.1 IP data

  internet routers IP 192.168.1.1 - 57.194.97.1

  We have 3 accesspoints wireless taking their internet of 192.168.1.1 oky guy

  what I want to do is when I connect to any wireless network to connect to the data line dsl with router 192.168.2.1

  When I use the ethernet on my pc I have IP addresses 192.168.2.222 for router data line and 192.168.1.222 for internet

  but the wireless is DHCP n that it is connected only to 192.168.1.1, which is the internet router, how can I do 192.168.1.1 192.168.2.1 when I connect

  using the wireless?

  I hope that you understand me ^_^

  Thanks in advance.

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

  Hope this information is useful.

• In "Wireless network connection properties" there should be two tabs ('networking' and sharing ""), but it is only 'networking '.

  In "Wireless network connection properties" there should be two tabs ('networking' and sharing ""), but it is only 'networking '.

  Why are there no tab "sharing".

  Hello

  Check the System Services, make sure that the ICS Service is enabled.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• connect to the internet by two wireless network adapters

  How can I configure the two wireless network adapters for both wi fi access points in a pc?

  Hi Myo,

  Thanks for posting your query in the Microsoft community!

  I'm sorry to inform you that, two wireless network adapters for two computer Wifi access points is not possible.

  From the second connection will connect to the network, one gets automatically disconnected.

  Please mail us if you have any other questions, and we will be happy to help you.

• URGENT! Two physical network with two subnets completely - no bridges - interface cannot connect both

  This is my urgent problem:

  I have a physical machine with two physical network interfaces. I have a VMWARE player and a virtual machine that must use cards on two different subnets, a public directly to the router and an intranet within the company.

  How can I just say a net card to go on this submarine and the other on the public void?  Go crazy. Help, please.

  Thank you

  P.

  Use the virtual network editor VMware Player, create an additional bridged VMnet and bind each bridged to a different physical network... card VMnet on a virtual machine, create a virtual network adapter on each subnet and bind each virtual network adapter to an another VMnet jumpered.

  For additional help with virtual network Editor, check this KB: VMware KB: using the VMware Workstation virtual network editor

• Sierra periodically drops network connection

  I installed Sierra last night.  For the third time today, I was told that I was not connected to the internet.  The first two times I have recycled my modem and returned.  This time, before that I did, the system which I would put in sleep after that I lost the internet, woke up spontaneously and I was connected. And now, the same thing that happened to me last night also happens to know that after you put the system to sleep, in a few seconds, he wakes up immediately without doing me anything. (Which had itself set last night, but now it is again).  No doubt these two are related?

  No idea what is happening and how to solve this problem, so it doesn't continue to occur?  Thank you.

  Tonight after the system into sleep, I woke it and again, for the fourth time today, I have had no network connection.  I waited a while and was connected again. So I think that there is something of how Sierra handles sleep taking offline or something similar.  I always hope that someone here can help with advice about what to do to fix this problem.  Thank you.

• Why El Capitan 10.11.6 wonder to accept incoming network connections to iTunes12.5.1?

  WHENEVER I'm starting iTunes12.5.1, I wonder by El Capitan "do you want the application"iTunes.app"to accept incoming network connections?

  "Authorized" it the first time, why is it happen again?

  This isn't a small problem of snitch I deleted all the rules of LS for iTunes. Start iTunes and get two windows permissions. The small window reproduced every time I restart iTunes.

  I reinstalled the OS X 10.11.6 and downloaded iTunes from the iTunes site and reinstalled. I always get the menu 'accept' whenever I start iTunes.

• Apple Store is not up-to-day - network connection lost

  Hello

  I have a MacBook Pro with OS X El Capitan installed and allows you to connect to the Bank of the United States, where I bought the laptop. I moved to the New Zealand a few months ago and changed the NZ store, and for the last two weeks that I'm not able to update the software through the Apple Store, I always get the message "the network connection has been lost", even if the network is OK:

  

  My account is active, no problem. I even "bought" a free app just in case and it's all good - I could add to my list of software and download it.

  Any thoughts on how to proceed?

  Thank you

  Fabio

  More info: I already followed the instructions to "If you can not connect to the iTunes Store - Apple Support.", everything is OK - no firewall issues, DNS or key ring...

• G6-2231dx Pavilion: Pavilion g6-2231dx and Windows 10 lack of network connections

  Then...  Where are the pilots 10 compatible of Windows for the g6-2231dx Pavilion?  I know that this OS was just launched yesterday, but an excerpt from the developer is available for some time now and any reasonable person would expect a company as big as HP now have their stuff ready for this deployment.

  The latest version of the operating system available on the menu drop-down page downloads & drivers of the g6 is Windows 8.1.  While the Realtek PCIe FE ethernet family and drivers Ralink RT3290 WLAN view and proclaim that they are in perfect working order through the Device Manager, or a connection to the local area network or WLAN connection appear when I opened the section "Manage maps" of the network and sharing Center.

  I've tried so far to solve the problem of the measures:

  Searched in vain for the site of HP compatible drivers, or at least an explanation of why it is not all the drivers available for Windows 10 on my device. By-the-way, there are a lot of dead links on your site.  Did the same to sites Web of Realtek and Mediatek without any result.  Googling has not helped much either.

  Downloaded and installed the latest drivers Windows 8.1, after uninstall of each device (as well as the removal of their files in the system directory) of the Device Manager with a reboot between the two attempts, since the HP website as well as websites of card manufacturers.  No results.

  Updated drivers for each devices via Device Manager and manually that it points to the directory where I extracted the drivers. No results.

  Disabled features, that I had to do to solve the problems with adapters flakey on the latest operating system from Windows to save energy.  No results.

  Rolled back drivers through Device Manager.  No results.

  Uninstalled devices again, tried and then install the drivers in compatibility mode. No results.

  Tried to install the Realtek drivers which claimed to be compatible with Windows 10 that I acquired through the Lenovo Web site. No post no installed errors, but network connections still do not come under the list, while continued to report as work awesomely by Device Manager!

  Editing a registry string by a suggestion in another forum support, but for developers of Windows 10 preview who proposed to change the string of 'dela Jacques = 7' where it was previously set at 5, in my situation.  No results.

  The state icon of connection in the system status bar always has a big, big, red X through it, when I left click on the icon, if waiting to see at least a list of available wireless networks, it is completely empty, with the exception of the option to turn on or turn off the airplane mode (Yes, I made sure it's off).

  It is quite frustrating and I know this isn't quite exclusive fault of HP/Realtek/Mediatek and I'm sure Microsoft has a big had to play in a no-so-finished product, but geeze!  Any help out there?

  MInutes after posting here, I found a solution to the problem of another Web site. This solution is relevant to those who have had a VPN software installed on their system during the upgrade of Windows 10. It may be worth a try, even if you don't have a VPN software installed prior to the upgrade. I followed the instructions below and after you remove both registry key and uninstall the DNI_DNE, the network adpaters Protocol (ethernet or wireless) immediately turned on and connected automatically without having to restart the computer.

  If you have unsupported software VPN installed on Windows 8.1 when you upgrade, you may experience this problem.  We are currently working on a fix.  To check if that's causing your problem of networking:

  1. Click the Start button, then click command prompt (Admin).

  2. Type the following command in the window and press ENTER:

  3. netcfg - s n

• This will display a list of network protocols, drivers, and services.  Check if DNI_DNE is listed in the output.  If this is the case, this problem applies to you.

• If DNI_DNE is present in the same command prompt window, type the following commands to solve the problem:

  Reg delete HKCR\CLSID\ {988248f3-a1ad-49bf-9170-676cbbc36ba3} /va /f
  
  netcfg - v u dni_dne

• If you receive the error 0 x 80004002 after execution of this correction, or the registry key has not been removed or the key that should be deleted is slightly different.  Open Regedit and navigate to the key: HKEY_CLASSES_ROOT\CLSID\ {988248f3-a1ad-49bf-9170-676cbbc36ba3}.  Delete it if it still exists. If this is not present and you still not received this error, just reply to the post.  We may contact you to help identify the cause of this error.

Slight modification of my original posting. Please remove the ' / going ' from the code as it is does not delete the subkeys, only values. So, if you have dni_dne and tried this fix with an error result, please try this again with the following change in the original post:

reg delete HKCR\CLSID\ {988248f3-a1ad-49bf-9170-676cbbc36ba3} /f

• HP Pavilion HPE h8-1111: Deffective Network Connection (802.11n WLAN Broadcom adapter) - defective or software hardware

  I lost my network connection and I don't know where to go to fix it. If anyone has an idea where ho to continue, I have tried so many stage already that I am at a loss... Help

  My computer semi regularly acted by the loss of my internet on a whim. Basically, it can detect WIFI, no problem, shows the strongest signal for her also. just tells me that it cannot connect to WIFI when I try (even if he can ask me the password and can tell if I use one bad)

  I can't reprocude the question

  No significant changes to my computer because the issues started happening.

  Simple steps:

  -Recovery (before the first event) system does not alter

  -Router and modem are not the issue

  -Could you find not updated driver anywhere (even though this does not mean that they do not exist, but having only no internet with the pc makes it particularly tricky - also HP does not provide the )

  -Power management wasn't the question

  -J' tried forget network the many times this problem has occurred. He has not fixed it.

  Additional troubleshooting showed:

  -Reset the Winsock Catalog did not resolve the question more than once (emplying he did the first time I did).

  -Reset of TCP/IP, that does not solve the issue more far.

  My WIRELESS card is a Broadcom 802.11n

  Finally, the only thing that I can see (although I can easily miss something obvious) is my reinstallation of an old printer inkjet EPSON Workforce 545, which I am connected to my WIFI and my PC via USB (why I used wifi since I got cable?...) I do not know) a few days later, people who use the same network reported the act more as usual but I have not noticed anything on my end.

  -J' have been disconnected from the network to the printer and stopped using it.

  -J' found evidence of his feature wirless allgedly interfere with other devices here (search for entitled Review "bought two units for corn or work")

  http://www.CNET.com/products/Epson-workforce-545/user-reviews/

  -Usage guide also mentioned the possibility of non-zero of the interferingwith printer wireless (end of p.328) other devices:

  chrome-extension://oemmndcbldboiebfnladdacbdfmadadm/https://files.support.epson.com/pdf/wf545_/wf545_ug.pdf

  Edit 12/04/2016

  I ended up having to do a factory reset on my computer for unrelated reasons. To reconnect the original WLAN card, I don't have to use the USB adapter that I bought to solve my problem.

  Factory reset works if fails everything else! Solution without after all!

  Hiya

  Well I'm really ideas, I have revised the HOW2 and he is shown below, just in case it helps.

  

• "We could not complete your iTunes Store request. The network connection timed out. »

  Every hour or two iTunes for Mac displays a modal dialog box with the error 'we could not complete your iTunes Store request. The network connection timed out. "This interrupts any activity like playing airplay or order with the Remote App on iOS.

  I can identify no problems of networks. If I go to the iTunes Store deliberately I have no problem. I have no download waiting on the iTunes store. I try not to buy anything from the iTunes Store. I have no reason to connect to the iTunes Store.

  There is no update unapplied for iTunes. There is no update unapplied for Mac OS X. There is no update unapplied for my router. There is no network connection problem to any site I found.

  I can't find all the messages that allow me to debug this problem. The support page to If you can not connect to the iTunes Store - Apple supported provides no useful information.

  What this error message should tell me? What problem I actually feel?

  I noticed that sometimes.  I just quit iTunes and restart.  The problem reoccur not (until it is once again).  But for me, it's months between occurrences.

• Equium A60 - no wireless network connection

  Hello world

  I have had a good look through the forums and can't find anything related to this but my apologies if this has been addressed elsewhere :-)

  I set up a wireless home network with a Windows XP desktop computer with a router and a laptop old Win98, WinXP SP2, which I can't connect and an Equium A60. I installed two different network on the A60 USB adapters, seems to be okay with all of them except that there is no "wireless network connection" listed under network connections Control Panel. Both cards work fine on two other machines, so there must be a problem with the A60. I installed an adapter and then uninstalled before trying another.

  Under control-> connections Panel Network, I can see an old broadband connection and the connection to the Local network (which is allowing me to connect to the router via Ethernet, so that the router will work), but the wireless network connection icon is not there. The driver for the USB adapter makes its appearance in Device Manager and is reported as working properly, but if it worked correctly then (I think) a wireless connection icon should appear - it happened with my other WinXP desktop.

  Any ideas of what could be the cause?

  Thanks in advance
  Gareth

  Post edited by: g_shaw - added a few details

  Hello

  I guess that the external WLan USB stick has been recognized one installed correctly. You said it appears in Device Manager. Are you sure that the WLAN USB key has been recognized to 101%? !!

  If the WLAN USB key is recognized correctly, check the properties of this stick. (I think you should right click and then click on properties).

  But if the stick was not recognized, you must verify the properties of the single USB ports and power safe mode.
  Choose the USB single root hubs in device, right click, properties, tab power management Manager and disable the option called allow the computer to turn off the device to save energy.

  So maybe it helps

• Photon: Dropped calls and network connectivity problems

  I bought my Photon August 18 and he was not long for me first to the problems with network connectivity.

  The phone displays signal on the phone, but when you try to call, send text messages or surf the web. Zilch.

  A soft reset works every time. I've had some experience with the issue of the "appeal of ghosts", but had no network connectivity so often that he was too much a problem. Restores the soft 3-4 per day.

  I took the phone to the Sprint store and they told me that my phone verified and were not hardware problems that may be found. I said at the time on the update of the software of MR5 and was anxious to see how the phone after the update.

  I received the update on Wednesday and the phone worked fine. No appeal of ghost, no network connectivity not problems, only dropped the call.

  Now, Friday morning, I lost network connectivity despite seeing the strength of the signal and had to perform a soft reset to regain connectivity. My wife and I bought this phone at the same time. She had many calls interrupted before the update and we both experienced after that update eventhough signal showing on the phone is at least two if not more bars.

  Is this a known issue? Is it going to be/CAN this be corrected by a software update? Is this phone a lemon and he'll remember?

  I LOVE this phone. I don't want to get rid of it, but...

  Seriously. It's a phone! Making calls should be the FIRST thing that is done right.

  Please, someone, Motorola, reassure me that this isn't a lemon and that network problems are going to be fixed. I CAN wait, but I don't want to get stuck with two phones for $200 that need to be pampered just to be usable.

  Thank you

  TC

  Yes, it turns out that be was a buggy phone. Two stores tested Sprint phone for reception of the signal and they said that it spent; but as said the technician in the second store, the tests they take place the phone in ideal conditions.

  The two stores I've visited, said they were ready to replace the phone, but my first visit came just before the MR5 update software while I was willing to wait to see if the update corrects the problem. It didn't, but the replacement of the second store phone works fine with upgrading to MR5 and really no problem.

  I'll go ahead and mark this question as a response, but if you experience the same problems of chance complete loss of all network connectivity (Sprint or otherwise), I recommend getting the phone replaced. It is a bad camera.

  Oh and the technician at the second store mentioned the network problems. It has been a problem for them, but the most telling proof of the issue of network is random dropped calls. So if from time to time, you lose a call under the conditions of good network signal, it's probably not your phone and Sprint. I have almost that many abandoned calls as of late, so it could have been the wrong phone I had that really amplified the problem... or... Sprint has got some of the bugs in our region.

  Thank you for looking in. I hope that your problems are as easy to solve as mine and I hope that you are still within your 30 days so that you get a new replacement.

  Best wishes

  TC

• Airport Extreme can amplify two distinct networks?

  I have Cox hispeed internet and a simple modem which is divided into two separate networks; one of my computers and the other for support (Apple TV, etc.). My unique adjustable Airport Extreme upward to stimulate each of these networks or I am only able to stimulate a? Thanks for the tips!

  I have Cox hispeed internet and a simple modem which is divided into two separate networks; one of my computers and the other for support (Apple TV, etc.).

  Not exactly what you mean by "split into two separate networks" here. Do you mean that you have an Ethernet switch connected directly to the modem that is used to make the separation? What is the make & model of the modem as Cox brings you?

  Nevertheless, your airport, or pretty much any other wireless router can only a network of 'boost' a single Wi - Fi connection.