Two ways to log on to Windows?

Similar Questions

• Error "Unable to establish two-way communication with the device" Windows 8 with c309g

  Operating system: windows 8, 64 - bit

  computer: desktop

  Home network: network, the computer is on a wired connection, printer is on a wireless connection

  error message: "the computer is unable to establish two-way communication with the device.

  • When you install first of all my husband's new computer, we were able to install the software and connect the printer very well, and the printed test page.
  • A few days later, I installed the HP ePrint app on my iPad, found our printer and tried to print a page of a Web site. Printing failed, and the iPad app gave a message something like "the Word document may be printed." I cancelled again tried the iPad app, print work, and has not yet. I had not heard of AirPrint, so I did that on my iPad.
  • We tried to print the page of the computer instead, but the task has failed.
  • We looked at the parameters of the printer through the computer of windows 8 and found that there are two differently named c309g printer now displayed in the printer list.
  • My husband uninstalled the printer software, the computer restarted and reinstalled and then got the "the computer is unable to establish two-way communication with the device.

  any ideas on what to do next?

  My brilliant husband fixed it. Power cycling the router.

• Enable two-way to care will not be checked if I get a communication error message when I try to print from my Lexmark Pro905 (using Windows 7 64-bit)

  Help, please!  I tried to fix this for HOURS, reading the TONS of info. on the Internet without success.  I have installed and reinstalled the software Lexmark a dozen times.  It installs Lexmark Pro900 Series (network) and Lexmark Pro900 series (USB).  The "two-way" box will remain enabled in the properties of the printer to the USB version but not the network version which is what I want to use (since I want to be wireless).  I have no idea how to solve this problem. Analysis of my computer, copy, etc, everything works fine with the printer... I can't print... it keeps saying "Communication not available" and check the box bidrectional.  I check, hit apply, then ok, but then when I go back into the properties of the printer it is more verified. :(

  Hi Nicole,.

  I suggest to read the article below and follow the instructions.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab2&V3H=winvistatab1&v4h=winxptab1

  See also the article given below to set the printer as the default printer.

  Change your default printer

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  If the problem persists, I suggest you to contact the support of printer on the issue.

  http://www.Lexmark.com/en_US/about-us/company/contact-us.shtml

  If you have questions related to Windows, feel free to post. We're here to help.

• Satellite L20 - keyboard keys two-way - this driver download.

  I have a laptop Toshiba L20. I loaded Win XP but don't have original operating system. Problem is my '@' and '@' keys are two-way around... Can someone help me find the right driver for the keyboard?

  First the keyboard driver is part of the windows operating system.
  Second, you can solve this problem by changing the language settings of the keyboard and not by installing a keyboard driver.

  So, you can change these settings here:
  Control Panel-> regional and language-> languages-> details Options

  Here you have to change the language of the keyboard. I put t know what keyboard layout, you have exactly but maybe you should change British to the Americans or Americans in the United Kingdom.
  Check it out!

• HP Deskjet 1050 (J410 series): unable to establish two way connection printer

  Hello

  My printer is connected to my laptop via a USB port and provides ink level readings. It will not print any documents or test pages and when I try to align/clean ink cartridges a message "Unable to establish two track with device connection".

  Can someone advise me on how to solve this problem as soon as possible? Thank you!

  Hello @West__44,

  I would like to help you today to correct the problems of two-way communication that you encounter when using the USB connected HP Deskjet 1050 all-in-One printer on your computer Windows 8.1. Because you get this error via a USB cable connection there are likely a driver or software conflicts between your HP Deskjet and your Windows computer. Can I please you follow the steps below to resolve this issue.

  • Please, unplug your USB cable from your printer and your computer before you continue.

  Step 1: Remove the driver:

  For the purposes of troubleshooting, it is essential that we have a clean slate to work with. Therefore, I will be having remove you all traces of your HP Deskjet from your computer in Windows before you run the hotfix.

  1. Open the screen, Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key.
  2. On the start screen, type programs and features. Click on programs and features to start.
  3. Under the window programs and features will populate a list of the programs installed on your computer. Please scroll through the list and select your Printer HP Deskjet. Click Uninstall.
  4. Please follow the prompts on the screen to complete the uninstallation. Once the uninstall is complete, proceed to the next step.

  Step 2: Remove temporary files:

  1. Open the screen, Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key.
  2. On the start screen, type run. Click on Run to launch the run dialogue box.
  3. In the run box type %temp% , and then click OK
  4. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  6. Close the Temp folder when it is empty
  7. Right-click the recycling bin on your desktop and select empty recycling bin. Please proceed to the next step.

  Step 3: Install the device:

  1. Please click here to download the package full feature software and driver for your HP Deskjet printer.
  2. Once the download is complete, follow the prompts on the screen to install your printer
  3. Do not connect the USB cable until the installation program invites you to
  4. On your laptop, please make sure that the USB cable is plugged directly from the back of your printer to the laptop. Avoid USB Extenders and home stations as they can cause conflicts of USB communication.

  Once the installation is completed successfully, please test print to confirm that the problem has been resolved.

  Please reply to this message with the result of your troubleshooting. Thanks for joining the Forums from HP Support. I can't wait to hear strings attached good luck!

• After a microsoft error message, my laptop keyboard has sudenly has started to misbehave - characters are two-way and in case added places after the original character. Clues?

  After a microsoft error message, my laptop keyboard has sudenly has started to misbehave - characters are two-way and in case added places after the original character. Clues?

  Care to be more detailed?  What version of Windows?  What is the brand and model of the laptop?  How old was he?  Have you contacted the provider support?  What has changed on your PC between when it was last and now?

• GFWL, I can log on to windows, but not in the game (dirt 2)

  GFWL, I can log on to windows, but not in the game (dirt 2).  It says 0 profiles found on the login screen right after you decide to use an existing LIVE account.  I'm under win xp, game dirt 2 and trying to connect to games for windows live.  my connection works for web browsing, etc.  grid works great multiplayer.  I went through and installed the gamers for windows_live program/client, I connected, created a new account, then restarted the pc.  I tried the two start the game by pressing 'home', which would direct me to registration in a nearly straight line on the door, and then when I hit the ' signine box, he would just sit there saying "Please wait" then that "loading" twirling which is graph would just turn and spin. and on the registration screen indicates "0" profiles found.   why it does not find my profile (recognize)?  Ive also tried going first games for windows live, then the game dirt 2 without result.  can someone please?      Thank you

  Oh, and I was able to download "Tinker" and am now play online!

  also in my games to the information page for windows network live while playing "handyman", it is said:
  I am not registered the internet ip address field and the link system address field says 'not active' and it also says I'm not connected on the field of upnp either.  None of this helps to explain?

  THANKS AGAIN FOR THE TIME SPENT TO HELP ME WITH THIS

  Hi Aceraceraced,

  Thanks for visiting the site of the community of Microsoft Windows 7. The question you have posted is linked to the profile in the game of the dirt and would be better suited to the Windows Live games community. Please visit the link below to find a community that will provide the support you want.

  http://www.Microsoft.com/games/en-us/support/pages/default.aspx

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is there a way I can welcome screen, windows logon password?

  Is there a way I can welcome screen, windows logon password? I just want my computer to boot and in windows without the logon screen?

  Thanks for your help, I would be without a computer if I don't hadn't found you.

  Extract from http://support.microsoft.com/kb/315231...

  You can also turn on automatic logon without editing the registry in Windows XP Home Edition and Windows XP Professional on a computer that is not joined to a domain. To do this, follow these steps:

  1. Click Startand then click run.
  2. In the Open box, type control userpasswords2, and then click OK.

     Note When users try to view help in the window information user accounts on Windows XP Home Edition, the help information is not displayed. Additionally, users receive the following error message:

     Cannot find the: \Windows\System32\users.hlp Help file. Check that the file exists on your hard drive. If it does not exist, you must reinstall it.
  3. Clear the "users must enter a user name and password to use this computer" option, and then click apply.
  4. In the automatically on log window, type the password in the password box, and then retype the password in the Confirm password box.
  5. Click OK to close the window automatically on Journal , and then click OK to close the user accounts window.

  Tricky

• In XP, cannot change the way users log on and outside, getting the error "a recently installed program has disabled the Welcome screen and the user fast switching.

  The switch on my fast computer of user function has been disabled on my computer. When I try to use this function. I get the following message.

  A recently installed program has disabled the Welcome screen and the fast user switching. To restore these features, you must uninstall the program

  . The following file can help you identify the program that made the change. GT Gina.dll

  * original title - I have a windows xp. Under user accounts, choose a task. Under change the way users log on and outside.  I get a message that the function of the Welcome screen has been blocked *.

  Hello

  You can try the steps outlined in the article below and check out them.

  The logon screen "Welcome to Windows" does not appear when you start the computer
  http://support.Microsoft.com/kb/817142

• Problem of the printer, I get "the computer is unable to establish two-way communication with the device.

  Original title: printer problem

  "The computer is unable to establish two-way communication with the device. I have pluged a all cables and pluged in that they return.

  Hello
   
  1. What is the brand of your printer?
  2. when the question is is produced?
  3. you remember to make changes to your computer before the problem?
  4. when exactly you get this error?
   
  I would temporarily disable all security software and check if the problem persists.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  If you have an HP printer, you can consult the links below.
   
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=&cc=us&DocName=c01868684&product=3737195
   
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=&cc=us&DocName=c00301806&product=407677
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• In Vista Home Premium SP 2, I can't update: error 80070490. (I can update Security Essentials) None of the tools / corrections / convenience stores solves this problem. Is there another way I can fix my windows.

  FixIt / Forums / Automatic troubleshooting / scannow / etc all tried without success; It will not update. None of the tools / corrections / convenience stores solves this problem. My installation disc was done by oneself as the HP computer came with a disk.  Is there another way I can fix my windows.

  http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-80070490

  Read the above, there are two options if the first does not work try the other.

• can't print-impossible to establish a two-way communication

  Win7, Lemark printer with a USB connection.  I move the printer to a Win7 computer, where he worked on another computer.  I wanted to use a longer USB cable but removes any new variables I use the same USB cable.  I deleted everything I can find on printing and downloaded the new drivers and install, several times.  As part of the installation, I can print allignment page.  However, when I try to print a test page, I get the message that it cannot print because it is impossible to establish a two-way communication and go into the Setup menu and set two-way communication.  I go to the ports tab in the setup of details and the checkbox for two-way communication is grayed out, so it cannot be set.  How can I get this impression of installation?

  Hi Hustlinghare,

  -What is the exact full error message?

  Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  I suggest you check out the link for help that is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  For more information, refer to the article below.

  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• RESOLVED: External Volume RAID 5 TPG "split into two" once connected to the new Windows 7 64 bit install

  I have an AMS Venus T5J external drive enclosure (DS-2350J); It is filled with disks Western Digital 1 terabyte Caviar Green 5, model WD10EADS.  The device of Venus using a control panel with a JMicron JMB393 chipset, which is able to create RAID volumes to a connected host system transparently.  I used it to create a volume of 4 terabyte RAID 5 covering all five disks.  I've been accessing using a laptop Toshiba P105-S9337 with a card PCMCIA Vantec eSATA interface, which worked, but was not very effective.  Of course, it was necessary to structure the volume as TPG due to its size.  That has been a challenge.

  My primary system was Windows XP 32-bit installed, which does not support GPT disks.  I experimented with Ubuntu and another distribution of Linux, which supports the GPT, but ran into problems to mount the RAID 5 volume transparently (it may have partially been my inexperience, but it * should * have been easier).

  So I decided I have to install Windows 7 on this system, so that I could get access to this RAID her volume.  The system is based on an Asus M2N SLI Deluxe motherboard, which has an eSATA port integrated driven by a JMicron JMB363 chipset (NOT capable port multiplier).

  Windows 7 installation, installation of the JMicron driver for the motherboard and log box RAID, Windows little wanted to assign the 'disc' a new disk ID in order to to use.  I met regularly this process in the past without problems, when the new disks are presented on a Windows system, so I thought that anything that allows him to do.  However, has as expected making accessible existing volume.  After investigation, I discovered that Disk Manager believes that there is a space UNALLOCATED 1.67 TB and nothing more!

  At this point, I was naturally anxious, because I had data on the volume.  I checked the volume by connecting it to the laptop Windows 7 (32-bit) with whom he had previously worked and found a slightly different and more revealing image in disk management: there were TWO regions illustrated for the disk, an exactly 2 TB and the other TB to a 1.67, this last occupant clearly space greater than 2 TB.  These two regions, yet once, were listed as unallocated.  In both systems, Windows 7 was also clearly assumed the volume she TPMS, since the two I saw the option convert to GPT... which is already!

  That's happened?  Simply allowing Windows write a disc ID to this volume somehow corrupt?  How can I recover the previous volume of 3.67 unique TB who was present?  Should I just order in disk management to convert it to a GPT disk?  Is a non-destructive operation?

  I solved this problem with a perfect result...

  In short, I could use TestDisk to recover completely with all data intact original partition table.  It took several tries, several hours waiting for the paint to peel (scanning) and finally a brief dialogue with the proponent (Christophe Grenier).

• I am owner of Dreamweaver 8 comes with Macromedia Studio 8. I'm getting worried about the age of the machine which is on. Is there a way to upgrade a laptop Windows 7 which does not involve a monthly rent and allows to work on my website source

  I am owner of Dreamweaver 8 comes with Macromedia Studio 8. I'm getting worried about the age of the machine which is on. Is there a way to upgrade a laptop Windows 7 which does not involve a monthly rent and allows to work on the source code of my Web site completely offline?

  Thank you. Last time I looked into things with the description "Cloud", it seemed to me that you either need to be logged to the software work (possibly validate the rental date?) and/or your content of current things was 'in the cloud '.

  While I don't like the rental model, if I can make it work offline that may be an option.

  Fortunately, the machine still works, so I have little time to decide. It is likely that my existing sites in Dreamweaver 8 will be compatible up with current versions?

• Audio support two-way with PCoIP?

  I am recording the sound with an analog headphone/microphone plugged into a XP machine and connection to a VM XP via VMWare 4.0 build 233023.

  Sound recording is grayed out.

  Does anyone know if audio two-way is supposed to be supported with PCoIP for Windows or Linux?

  Thank you

  Hello Romatlo, bidirectional audio not supported yet... will be in a

  upcoming version.