TX stops with a text file

Similar Questions

• Problem with unicode text file

  Hello
  
  I have files of unicode text containing Chinese characters. I'm currently building sides manually using these for a unicode application unicode text files. The manual process shows the 'Success' message, but I'm not able to see the dimensions. I am just able to see a single unknown character.
  
  Pls help

  Try to open the file in a text editor like Textpad or ultra edit and set the encoding of the file it & save the file. This command sets the BOM that tells other applications to the encoding of the file.

  Note:
  Marker order byte (BOM for short) is a hexadecimal value at the beginning of a file that is used as a 'flag' or 'signature' for coding and/or hexagonal byte order that should be used for the file. With format UTF-8 data, it is normally hex bytes EF BB BF.

  Robb

• Is there a way to open the text files with arbitrary extensions?

  As part of the mobile platform iOS, is possible to open arbitrary text files that have an arbitrary extension?  For example, in the course of my work day, I meet regularly with plain text files that have an .out extension.  I'd love to be able to open these simply with iOS notes without renaming them in .txt.  I meet many of them and only need to do this for a few minutes, so take the time to rename them significantly adds both.

  On the desktop a BONE can generally "open with", then choose the application.   I'm looking for the equivalent in iOS.  Please note that to access the files on iOS is not a problem with icloud drive, dropbox, etc..  they just can not be opened easily.   Simple text editor, word processor not full blown.

  You will need a software that can handle the file.

  Usually the file management applications can manage any type of file.  I like the 5 Documents to Readdle, it can open almost anything.

  https://iTunes.Apple.com/us/app/documents-5-file-system-PDF/id364901807?Mt=8

  The equivalent of 'Open with' in the iOS is "open in", 'Share xxx' or even 'Copy To '.

  How to get to it, depends on where the file is located.

  ICloud drive for example, you can do open the file in a specific application by holding your finger on the icon of the file and by selecting more «...» "in the menu that appears, and then selecting"Share point... ". "and finally select an application from the list.

• Write to the file text File.vi out all but first line begins with tab

  The PNG attached shows the code used to accumulate strings concatenated into an array of strings for the first four lines, then to a string in the array to the worksheet String.vi and, finally, use write to Text File.vi the lower right corner shows the result in a spreadsheet. Note the 3 empty entries marked by a filled red rectangle. Examination of hidden characters shows that there is a tab at the beginning of lines 2, 3 and 4. There is no tab shown in the code. How these tabs to get? How can I stop them? I tried with the option 'Convert EOL' on and outside, without any difference. The help says that an EOL OS-dependent character is added to each line. I can't imagine that the EOL Windows character has a tab.

  The tabs are from the table to the string of worksheet function.  You build a chain of worksheet, complete with tabs and CR.  Just drag a concatenate the strings in his place and it will work.

  I would bag all constants of the tab and the CR.  Build an array of 2D with just the values strings (without tab, no CRs), happening in the array to function SS.

• While loop with reading of text file - calendar of events in a given period

  Hello world.

  I created a program that if serial interface via a port to a syringe push in my lab. Currently, the program reads in a text file-flow rate values and sends them to the pump, one by one, through various commands. I need to ensure that whenever a new flow rate value is sent to the pump, it does in a specific/hard time for a while. I.e. every 0.1 seconds, changes in flow rate and must are active until the next period. I tried to use a timed loop and I think I've succeeded, but it hogs system resources, so I was wondering if there was a way to do it using the number of cycles or something of this nature. I just started using LabView, so I'm slowly getting the hang of it (easy when you watch my VI!)

  See attached VI. I took orders from serial port and have instead orders display in an indicator. The nested and densely populated while loop contains the commands that need to be completed/last during the period (like 0.1 second).

  Thank you for your time and help!

  -Phebotalus

  Hi, you should read some introductory material on LabVIEW to down the idea of the stream.

  Basically, the data flow in the wires from left to right, and any node will not work until it has reached all of his contributions.

  The thread of the error is the best way to run data streams.

  ***

  In your VI I use data wires, their execution through structures, and forcing the structures to run in the sequence.  Using a structure of sequence you mentioned in your next post will force the two scripts to execute in the order of (the only one we discussed to be in race condition.)

  Similarly, for brevity, I would wrap the EMO and she is business structure in a single sequence and force it to run last using stream.  In this way the user has the most possible time to decide to hit the EMO before she is called by the application.  As it is now, it most likely is interviewed at the beginning of the loop, so if it's the exchange value you won't see results until the next loop.

  When running in execution of highlight you see the order of data flow, but that is not guaranteed to be the same for a normal performance, where the use of the data stream.

  ***

  The counter tick account ms up to a very large number and then "says" reset and start counting again.  I know you want to START the loop as close to every 10 ms.  Yes, using data flow, take the number of cycles first, perform actions, then return the number of cycles.   The second time of the tick read that you are in a nested loop that does not stop until you get 10 or more difference on the number of cycles.

  And, on the off chance that you must achieve "return" on the tick counter comes stops the nested loop then move.  (if the second measurement is less than the first, then the tick counter handed.  If you miss this situation while you'd have to wait a long time for the condition of the difference > 10 in the reunion, basically locked in the loop.

  ***

  You could put the EMO sequence, we have seen, in line with data streams.  Before or after the second control of ticks will not make much difference in terms of 10ms.  I would put it after checking the tick, again give the user more time to hit the EMO if necessary.

  ***

  I put in a queue for the stream error and removed the other stuff.

  LV2010

  Check out some of the LabVIEW intro docs, they are online, they discuss these issues and much more.

• iCloud drive text files being opened with numbers

  Before, everything worked fine with text files (.txt files) I have in iCloud drive.

  A tap on iCloud drive and another click on a text file on my iPhone would open the file Notes.

  From some point on (I think I got the same text file open at the same time on my Mac and my iPhone) iCloud drive to text on my iPhone files are opened with numbers.

  Later, when I type a text file to the iCloud drive on my iPhone I have numbers open this file.

  When I press the information next to the name of text file icon, I get a screen of info saying at the top of the right page "open in numbers."

  I have the text file is a file in format (.rtf), there is no problem; Notes opens this file; and the Info screen, top right, for this file says nothing about the application that will open the file.

  This only happens on my iPhone; I have a 5 s, 64 GB, with the latest iOS 9.3.1

  On my Mac everything works fine.

  I tried a "Reset all settings" but that did not work.

  No idea of what is happening and how to fix?

  Even. .txt files will open in figures on iOS of the iCloud drive. Why is this and can it be changed?

• AppleScript - extraire extract values from a table, create a text file with these values

  Hello world

  Lets say I have a table that looks a bit like this

  

  And this table I would create 2 text files (or even more, depending on how many switchnames are there) who look a bit like these

  

  

  Is it still possible?

  I suppose to create a Service (which can be called in numbers) with Automator which includes an Applescript script - but - no idea since the script is not one of my strong suits.

  There is not need to be perfect, because tables are not necessarily the model presented above - so to tweek the script to the application will be necessary. The text files can be created/saved in the same folder as the file numbers is in.

  Y at - it script-genius out there?

  See you soon

  Florian

  Select the column of fist of the data, and then run this script by copying the Forum and paste it into the script editor.  The files will appear on the desktop

  say application "Numbers".

  say front document to tell the worksheet active

  say ( class is worn) fromfirst table whose selection range

  selectionRange defined in column 1 of the selection

  set cnt to 0

  the value destRange for range

  the value currentList to {}

  -the list of switches

  Repeat with acellule in selectionRange cells

  -say acellule to set the value on the NTC

  pass the value to the value of cell

  if and ((cnt > 0) (switch is not missing value) and (currentList is not contain switch)) then

  switch and the value in the currentList currentList

  end if

  NTC put to the cnt + 1

  end Repeat

  -Display dialog box "to the list of items is:" & currentList & "a list" & (currentList County) ".

  Repeat with aswitch in currentList

  " game textOut to '# Script generated with Applescript for switch' & aswitch &"

  # on "& (today's date) &"

  !

  conf t

  "

  set cnt to 0

  Repeat with acellule in selectionRange cells

  -say acellule to set the value on the NTC

  pass the value to the value of cell

  -Display dialog "aswitch is []" & aswitch & "] and switch is []" & switch & "]".

  if (aswitch contains the switch) then

  the value cellCol to address a column of first cell of acellule

  address of line of first cell value cellRow in of acellule

  value to the aport (value of the cell of the column (cellCol + 1) cellRow) integer

  the value vlan for the (value of the cell cellRow of column (cellCol + 2)) integer

  the value desc to the (value of the cell cellRow of column (cellCol + 3))

  " put to textOut textOut &.

  !

  "" IG 1/0 interface / "& aport &.

  switchport mode access

  switchport access vlan "" & vlan & ""

  Description LINK TO "" & desc & ""

  "

  on the other

  -Display dialog box "did not: []" & aswitch & "] and []" & switch & "]".

  end if

  NTC put to the cnt + 1

  end Repeat

  Set myFile to open for access (path to the Office as text) & aswitch & '_output.txt' the with write permission

  textOut write to myFile

  MyFile close access

  end Repeat

  end say

  end say

  end say

• Control the Structure of the event with text file

  I'm new relativaly in LabVIEW (experience only about 2 weeks). I am currently control a stepper motor using a structure of the event. Similar to the sample code given by LIFA, I entered my settings how the engine not move away, then press a button on the windows before, and it works this way. I also have other equipment that works as well in LabVIEW, as a transnational step; all components operate individually.

  Now, I'm trying to make the more automated system and to ensure that all the different equipment work in the same code. So, I tried to implement a structure of the event using a text as an input file to try to control events. The text file has a table 1 d of numbers going down vertically (only the line numbers change). So, I used a table of index function to take the numbers one by one, use a loop (while loop in this example) to go to the bottom of the column of numbers. However, the event not register the change, even if the indicator shows the value is changing.

  Attached, it's my test code and the text file that I use to try to control the structure of the event. Please let me know what I am doing wrong. Thank you.

  Oh, now I understand what you tried to say. I'm using a loop and a case structure to activate different events with the entries in the table. I thought case structures and event were the same, but you taught me the event structures are used just for the façade stuff. Thank you all!

• 1 error in writing on a text - installer with Application Builder file

  I wrote an installer using the Application Builder to install the runtime engine that allows any computer without LabVIEW to run an .exe program. Setup runs and installs engine race and then as a .exe VI. When it is done installing, the .exe VI opens automatically.

  An error appears when the .exe opens and says "1 error in writing to a text file". If the user clicks on the error that it can run the program without problem, it converts file formats in a file .lvm. Automatically, it generates a new file name and saves the file in the same directory, but with a different name.

  Why did it only happen when opening first upward? The program tries to run when it automatically opens? Is there a file path residual left in the program that trys to run first, before that the user put his own file path in the program?

  I am semi new to labVIEW (a few months) and that nothing shows that would create this error at the beginning of the program.

  Thank you

  Hi Scott,.

  Well, you could model a little VI and turn on debugging highlighted to test your idea!

  THINK THE STREAM!

  How a Boolean entry should WAIT for the action of the user? It should be read according to the stream!

  What this small pseudo-code:

  REPEAT
  
    Wait (50ms)
  
  Until the button

  Or how about an event in the user queue structure?

• How to open a text file with Notepad to labview vi?

  Hello

  How can I run a program of a vi?

  I want to open a text file with Windows7-block-notes after a file-path-control selelecting and pressing a button.

  Thx for the help

  Another option is the URL opened in VI of default browser located in the HUD assistance. If you use the path to the string function, you can feed the result as a URL, and the Windows shell knows the default program-oriented, which is Notepad.

  Edit-

  

• Print table with decimal places in text file

  Hello

  I tried to find this information on the forums, but I can't seem to find exactly what I'm looking for. I VI that when it's finished has a 2 column and row table 5 or more which is filled with thermal loads and corresponding tensions. I want to print this table to a text file, but I want to understand decimals in at least the tension. I've attached what I have, thanks in advance

  The answer is on your pc. If you have the open Help context, click the detailed help. There is a link here on the format specifiers. You use %d which tells the function to convert whole numbers. You want %f for floating point numbers.

• problem with the backup data in text file

  Hello

  The problem I am facing wihile, saving the data in the text file is that everytime when I'm slecting the path of the façade, data that are recorded are added with the previous data, not only in the new text, the new data set is saved but also, is there any previuos run for the program , the corresponding data is also present in this text file.

  However, when I change the same ''(file path) to 'constant' in the control block diagram, and then add the path of the file, it doesn't have this problem. Basically, changing the "file path" constant in the diagram of control block (so that it is displayed in the front panel) is at the origin of the problem.

  Help, please!

  Thank you

  Your shift on the loop Register For is not initialized. It will keep the value of the string since the last time that he performed. That initialize and it should solve your problem.

• I've just updated my bios and have a text file in a new disk with error

  I just updated my bios, and I think that every thing went smooth.the bios version in the menu of the bios appear to be new version when I log on windows a partision again with the name "HP_TOOLS" is there with a file named 'the hp bios update.

  with this text

  01/07/13 17:23:11 update BIOS HP EFI 2.7.1.0 began
  01/07/13 17:23:11 init SMBIOS data Failed

  shoud this I mean shoud update of the bios again.

  What shoud I do to remove the new partision if it is not needed.

  Please help thanyou beforehand.

  If the BIOS rev display properly when you restart, then the update was very good. The HP_Tools partition is small and is used for the diagnosis and recovery of the BIOS. I suggest that you keep the partition, unless you absolutely need the space

• Reading of the text files with mixed data types.

  I was able to read a text file ASCII with different types of numbers (whole, real) and the chains are associated.  However, I can't read a timestamp that is in the calendar and the clock for carpet (dd/mm/yy HH).  In view of the line

  34 03/26/12/11 01:23:45 56 78 90

  I want to read the time directly, but so far all I can do is read the date and time as a string.  If the reading string is the best I can do, how to convert a value of internal time?

  No need to separate the date/time string in two different things.  Do it in one fell swoop.

  

• Problem with end of line in the text file.

  Using LabVIEW 2010 on W7 64 bit in the USA.

  I have an application in which I write in a text file.  I use the function "Write to a text file" to write the text and "Reading a text file" function to read again.  My problem is with the end of line character.  The text that I write is a long chain, not an array of strings.  While building this chain, I insert the constant EOL of the palette of channels function to indicate that a new line is planned.  My tests showed this EOL constant values of consecutive bytes 13 and 10.  After writing all the text in a file, I can open the file with Notepad, or Word, or something else, and it is displayed correctly.  When I read he returned with the function of text file reading, I'm trying to parse the string by searching for the same constant EOL, but it does not work.  A closer examination of the extracted string from the file reveals that the value of end of LIFE has changed for only 10.  The location of the byte to 13 disappeared.  I know there is a note on the writing of the function of text file add/change the EOL characters, which are the default values of the system, but the note specific tables.  I manually put the value in the string.  Does anyone know why this happens and how to fix it?

  Thank you.

  The help of reading from text file function

  The function converts all characters in end of line break characters online platform, dependent unless you right-click the function and remove the check mark next to the menu item Convert EOL .

  Right-click your reading and uncheck the EOL conversion.  I recommend to do the same thing to your writing to text file feature.