FSX graphics prob

Similar Questions

• Satellite P300 - 19 p - how to improve the graphics for Microsoft FSX?

  Please could someone tell me if and how I can improve the graphics of my laptop when I run Microsoft FSX?
  Of course, I could buy a good laptop with a high-performance graphics card, but is it something I can do to improve the graphics?

  Thank you very much.

  Hi Ben

  First of all, I must say that Flight Simulator X needs a lot of graphics performance and this game is really high system requirements. You need a powerful CPU, graphics card and enough RAM.

  Regarding your question an update of the map for example graph it s is not possible. It s fixed/soldered on the motherboard and there is no Exchange possible on desktop.
  So if you want a laptop that is faster for games, you can buy a new one, like the Qosmio X 500.

  You can only improve performance if you reduce the resolution of the screen or the details of the game.
  Make sure also that if the last page Toshiba display driver is installed.

• When I install FSX SP2, the box of the menu showing the plan chosen and also in the game, the graphics are all messed up (black, black with lines on the screen and so on) do not know what to do? I need help.

  I have FSX Deluxe. When I installed FSX SP1, it was all fine, but when I installed FSX SP2 graphics were messed up. So I uninstalled FSX SP2 and tried again, and it was the same thing. So I uninstalled FSX all together and reinstalled fresh and put on FSX SP1, it was going well until I put FSX SP2, the same thing happened again, messed up graphics.

  So I uninstalled FSX SP2 and updated my drivers graphic and tried again and the same thing happened.

  I need help please.
  Thank you

  Hi Mmarshall_1993,

  Welcome to the Microsoft Answers site.

  We would like to get a better understanding of this issue, so we can better help not only you but other users with similar problems.

  (a) what operating system do you use?

  Method 1:

  Adjust display settings

  Many recent Microsoft games require a card video and monitor that can run a resolution of at least 800 x 600 in color (16 bit). Set the resolution of Windows display on 800 x 600 in color (16 bit), and then test the game. To do this, follow these steps:

  1. in Windows XP, click Start, point to settings and then click Control Panel.
  In Windows Vista, click on start to reduce this includes personalization thtype in the Search box and then click on personalization in the programs list.

  2. in Windows XP, double-click display.
  In Windows Vista, click display settings.

  3. click on the settings tab.

  4. move the slider of the desktop area or screen area slider to 800 x 600 pixel definition.

  5. in the Color Palette box or in the color box, click colors (16 bit).

  6. click OK and then click OK again.

  7. click Yes to accept the setting.

  Method 2:

  Adjust graphics hardware acceleration

  To adjust graphics hardware acceleration, use the method described for the operating system that you use:

  ·         Windows Vista

  1. click on start to reduce this includes this ima, type personalization in the Start Search box, and then click personalization in the list of programs .

  2. click on display settings.

  3. click on Advanced settings.

  4. click the Troubleshooting tab, and then click change settings.

  Reduce this includes this imIf that you are prompted for an administrator password or a confirmation, type the password or click on allow.

  5. move the notches on both Hardware Acceleration slider to the left of full (the parameter disable the accelerations of cursor and bitmap ).

  6. click OK and then click restart now.

  7. once the computer has restarted, test the game.

  ·         Microsoft Windows 2000 or Windows XP

  1. click on Start, point to settings and then click Control Panel.

  2. double-click on display.

  3. on the settings tab, click Advanced.

  4. click on the Troubleshooting tab.

  5. move the notches on both Hardware Acceleration slider to the left of full (the turn off all cursor and advanced drawing accelerations setting).

  6. click OK and then click OK again.

  7. test the game.

  Method 3:

  Check or turn on Direct 3D

  To check or turn on Windows XP Direct3D acceleration, follow these steps:

  1. click on Start, click run, type dxdiag , and then click OK.

  2. on the display tab, verify that all DirectX features are enabled. If all the features are disabled, click enable next to the feature.
  Note If some DirectX features are unavailable, verify that your video card meets the minimum requirements.

  For more information, follow the below mentioned articles.

  How to resolve display issues in Microsoft games

  http://support.Microsoft.com/kb/263039

  The Flight Simulator X game display flickers and are damaged on a Windows Vista-based computer that is connected to multiple monitors

  http://support.Microsoft.com/kb/933590

  Hope this information is useful.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error FSX Gold - "the graphics card does not minimum requirements for support of shader."

  I just bought FSX Gold and I have installed two of them, but when I click to open it it says "the graphics card does not meet the minimum requirements for the support of shader. This product requires a geForce3/Radeon8500 class or a better graphics card. Flight Simulator will now quit. "I went to support to see what happened and he said the need Shader 1.1 or later so I checked my Shader and he said he was Shader 2.0. you guys can tell me what's wrong.

  Details:
  CPU -  Intel (r) Core (TM) 2 CPU Quad Q6600 @ 2.40 GHz
  Speed of the CPU to 2.4 GHz Performance rated at: 5.28 GHz
  GB OF RAM - 6.0
  OS - Microsoft Windows Vista Home Premium Edition Service Pack 2 (build 6002), 64 - bit
  Video card - Intel (r) G33/G31 Express Chipset Family

  • Video RAM - 287.0 MB
  • 3D - Yes
  • Hardware T & L - No.
  • Pixel Shader Version - 2.0
  • Vertex Shader Version-2. 0a

  Version of DirectX-11, 0
  Sound Card - Realtek High Definition Audio
  Free disk space - 356.3
  DVD - ROM - HL-DT-ST DVD-RAM GH10L

  That's all. I hope you can help!

  Hi Man Com,.

  I suggest updating the video drivers from the manufacturer's Web site and make sure that direct X is enabled in the graphics card Control Panel conrtol.
  For more information, you can consult the following articles:
  Updated a hardware driver that is not working properly

  The problems of the game performance

  You can also read the following article and see if it helps.

  Solving graphic problems in Flight Simulator X

  Hope this information is useful.

• Yet Cs4 breaks down I'm starting a new project and gives me an error message [..-.. \sre\AME Prober.cpp - 258 preset] I chose nvidia 880 M graphics card and I tried to go to the old dr

  I asked a question here before and got a response, so I'm back. Yet Cs4 breaks down I'm starting a new project and gives me an error message [..-.. \sre\AME Prober.cpp - 258 preset] I chose nvidia 880 M graphics card and I tried to go to the older driver

  I couldn't on the forum last night! And today too busy...

  I think that a reinstallation is the only solution for the preset errors prober TEA that has been reported. Activation etc problems can be problems, if you have a subscription to the CC, try all the options to sign out/in on the cloud first Office.

• Using the Serial Port on the HP 50 g graphic calculator

  Hello world

  I have another question. I want to use the Serial Port on the HP 50 g to connect with another device. The device is called the MFJ-1214PC. What it does is to accept the text and commands through a 9-pin serial Port and converts the text in a Code Morse/RTTY sound audible. It also decodes Audible the Morse Code and RTTY radio signals and displays them as text on your computer. The program that controls the MFJ-1214PC was originally written for an IBM PC for the MS-DOS operating system. The HP 50 g graphic calculator meets the system requirements for the simplest version of the program. I was wondering if there is an MS-DOS emulator written for the HP 50 g, which would allow the HP 50 g to become the computer in this case, or if the program could be rewritten and brought to the HP 50 g. If it could be rewritten, programming language what do you think would be better suited to this type of application (if it is even possible?) or UserRPL, SystemRPL or Assembly. Don't forget that I'm a complete newbie with the HP50g and have never programmed with it yet. I'll include the manual of the MFJ-1214 PC as an attachment so that you won't have to look for him. Thank you in advance for your help!

  ~ Zekelegge ~.

  I understand (from my brief overview) out of the box-MFJ-1214PC, this offer box decoder output series computer.  The computer (50g in your case) will have the software to read message series and then convert that to an output for display.

  BartDb gave you the right answer.

  A serial cable with the correct speed level and reversing lever to manage as well as the 50G has a RS-232 signal to the outside world is the ideal solution.

  However, make sure that the output of the decoder box series package can be understood by the 50 g. aud, bits, etc.   (you have the set-top box manual, so you'll have to look that up)

  the streamsmart is not an aggregator of serial port.

  in other words, these connectors DIN of Qty 4 on the front do not accept series rs-232 input and send then to 50 G.

  I'm not an expert, streamsmart more info on these boxes is rare to find.  The probes are even more rare.

  However, I know that the 4 connectors are for the analog-to-digital conversion in the probes.  The streamsmart works as a "data logger" in which he sees the input probe, the A/D converted, then sends it to the 50G (or a computer via the USB port).

  In addition to the solution of Bart, there was another named Tiwag forum poster who created a serial cable and displayed a schematic representation of the cable.  This information can be found here:

  https://groups.Google.com/Forum/?fromgroups#! searchIn/comp.sys.HP48/serial$20port/comp.sys.HP48/ltcane1jSOw/uHyw2Ti03kgJ

  to see an example of programming to use the serial port of 50G, you can reference the following hpcalc GPS data collection program.

  http://www.HPCalc.org/details.php?id=7105

  It is written in userrpl so can be crossed with the reference of users advanced for the translation of the syntax.

  It seems that the main routine of concern for the comm to the gps is in the file "GPS >.

• Qosmio G10 does not work - some graphic problems

  Hello
  I have a Qosmio G10 a few years back, within the first year of its use the graphics seemed to go crazy after using it for games.
  Since then, I've left the but recently I dug to see if I can get it fixed it as my partner needs.

  1. whenever I start it I have a white screen with sound (I can get the screen each time by pressing F5 (current view).
  2. I tried the system restore cd, but when it finishes I wake a fragmented Windows screen with the beginning bar all over the place, and then it just freezes
  3. However, when I try a professional XP operating system to recover (I found somewhere), it starts up no probs apart from a few blue vertical lines on the screen, starting when I get on the desktop there is no probs although res is set to low and used to move (no graphics driver). Then I tried to load the Qosmio tools & utilities and can support all but the Chipset (that quite fragmented and I have to restart the whole process) and driver nvidia Gforce graphics that I assume will not charge because the chipset?

  I thought it might be a cd of defective recovery but when I changed during a hard drive of new fresh on the wrapper started everthing briefly as it should do this before, he crashed any temptation of power again.

  Pulling my hair out please help!

  Hello

  > 1. Every time I start it I have a white screen with sound (I can get the screen each time by pressing F5 (current view).
  Looks like the screen is positioned on the external monitor and so nothing does not appear on the internal screen laptops. Perhaps this happens because of the changed settings in the properties of the graphics card.

  > 2. I tried the system restore cd, but when it finishes I wake a fragmented Windows start with the bar start screen all over the place, and then it just freezes
  Usually the laptop should start correctly after the installation of the recovery CD. If the laptop freezes then a hardware problem is possible.

  > 3. However when I try an operating system XP Professional to recover (I found somewhere), it starts up no probs apart from a few blue vertical lines on the screen, starting when I get on the desktop there is no probs although res is set to low and used to move (no graphics driver). Then I tried to load the Qosmio tools & utilities and can support all but the Chipset (that quite fragmented and I have to restart the whole process) and driver nvidia Gforce graphics that I assume will not charge because the chipset?

  In my view, your graphics card could malfunction. I come to the conclusion because the laptop works ok until the graphics driver will be installed. Without graphic driver installed the laptop seems to run I think GPU dysfunction could also be the reason why the laptop does not start correctly after the installation of the recovery CD. The restore CD already contains the graphics driver that controls the graphics card chip

  So in my opinion, you should contact the ASP in your country for a control of the laptop.
  Maybe the technicians could find the fault.

  Good luck

• graphic driver for hp pavilion ze2000

  Hi new people on this forum it's like this ive got a hp pavilion ze2000 model number ze2251ea. He initially had family on xp Ive updated the memory to two concert and installed win 7 ultimate on it, the prob is I've found all the drivers for it except the graphic driver and drivers of the chipset if anyone can guide me to where I can find them, I'd be most gratfull, PS I think that vista drivers can work on it.

  Hello:

  You can use this chipset driver...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y & DwnldID = 20019 & ProdId = 816 & lang = eng & OSVersion = %0% 09% 09% 09% 09% 09% 09% 09% 09 %0 has % 09% 09% 09% 09% 09% 09% 09 & DownloadType =

  The Intel GMA900 graphics card is not 100% Vista or W7 capable.  I can give you the magic trick to make it work so that you can change the resolution of the screen and have the graphics acceleration, but you don't have Windows Aero.

  Here is the workaround...

  Download and run this driver.  You will probably get an error not supported operating system.  Conclusion of any windows error.

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=447348 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_47264_1%257CswEnvOID%253D2096%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  Now, go into Device Manager, expand the category graphics cards.  Click on the VGA Standard card.

  Click the driver tab.  Click on set to update driver.  Select her browse my computer for driver software method and navigate to the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp34749.  Make sure that the include subfolders is selected, and the driver should install.

  After you restart, the graph must be fine - just not Aero.

• Qosmio G30 - nVidia graphics card failure

  Hello

  as the title says my graphics card went kaput on Qosmio G30, who is 14 months old.

  I read in some places that could be the problem with the generation of nvidia graphics cards.
  Does anyone have any info on this subject because I have just quoted entre.6 and 1.8 k for what fixed it.
  This graphics card is separate from the motherboard or this prob will result in a new motherboard. If anyone has any info I would be very grateful, thank you, thomas

  PS for some reason that I could not connect with my username (yetchh) original so had to create a new account, have no idea why?

  Post edited by: yetchhh

  Hi Thomas

  That s a pity :(
  Especially the GPU (graphics chip) is attached to the motherboard. He welded s and replacement is not easy.

  There are several Lepidoptera, I called the ASP in my country because I needed some info on replacing the CPU on my old laptop and the guy said that the replacement of the CPU or GPU is not easy and is not possible.

  Well, what to say I think you should contact the authorized service provider in your country for replacement of equipment.

  But I wonder why you come in on costs?
  The laptop is about 14 months. If you have registered your laptop on the Toshiba page, you should get a 2 year warranty which should focus on the laptop.

  So all pieces of equipment should be replaced for free.

• Moved not FSX gives error 1935 at end of install on W7 Ultimate 64 bit system.

  New system of four-core 64-bit w / 12G ram and 1 G graphics card

  new installed W7 Ultimate system

  FSX Installer failed: Error 1935 (message about public key token and 32-bit processor)

  How can I install it in this system? Am I obliged to enter in a mode of compatibility or virtual system? I hope not.

  Hello

  Flight Simulator X is compatible with Windows 7, so you don't need to install in compatibility mode.

  First, remove any which instance of Flight Simulator X (FSX) of your computer and then try to install the program in the clean boot state.

  See this article for more information on the clean boot:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Steps to perform a clean boot:
  a. click the ORB start on your desktop
  b. type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. in the general tab, click Selective startup.
  d. under Selective startup, clear the check box load startup items.
  e. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  f. click OK.
  g. When prompted, click on restart.

  NOTE: Please check that you start the computer in normal mode after a repair. Follow step 7 article.

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers Feedback Forum and tell us what you think.

• Fuzzy FSX navigation lights

  After FSX starting and selecting my plane... in each selection, navigation lights, landing lights, etc all look like squares instead of real fires.

  I have no idea on what happened... maybe I did something wrong when you download a new plane... with the folder 'Effects' or 'Panel' foler?

  Everything works and looks normal (no problems).

  Help, please

  Hello

  1. which version of the Windows operating system is installed on your computer?

  2 have you made changes on the computer before this problem?

  I suggest you to try the steps in the following Microsoft articles and check if this may help.

  Solving graphic problems in Flight Simulator X:

  http://support.Microsoft.com/kb/925722

  Troubleshooting issues with Microsoft games to display:

  http://support.Microsoft.com/kb/263039

  Hope the information is useful.

• Report: FSX Acceleration & Windows 7 bug RC1 x 64

  I installed Windows 7 RC1 x 64 and Deluxe FSX + acceleration.
  My graphics card is 9600GT and CPU DDR2 RAM(This is why I chose to use 64-bit Windows 7) E8400.4GB.
  At that time, I was playing FSX and everything worked well. But a few minutes later, when I clicked on an option in the context menu (or menu bar) FSX (like views, plane, display, etc.), FSX not responding and crashed on the desktop within 30 seconds. The error report, stated that a fatal error has occurred and FSX must be closed.
  This problem occurs when you use Vista SP1 x 64. I tried to reintall FSX and reset all settings, but... always do that.
  Someone knows how to fix this? I really love Windows 7, but I so love FSX.
  Sorry for my poor English.Wish you can understand me and solve some it.Thx.

  Hi FSXFans,

  Thank you for using answers Forum.

  I see that this problem has been resolved in your other post.
  http://social.answers.Microsoft.com/forums/en-us/GettingReadyforWindows7/thread/4ed4555a-3abf-4c25-a8da-40fc6926a3c5 Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• FSX with acceleration gold Edition starts now when I upgraded to Windows 7. It happens just with blue logo start FSX and crashes.

  I ran FSX with acceleration gold edition on my Dell inspion 520 with Windows Vista Edition home premium SP1 and 2 and it worked very well.  Now I updated to Windows 7 Home premium and it just hangs.  I uninstalled FSX and acceleration completely and even delete the directories and given it a clean install.  It seeks to build the database markings and landscapes, and then I let myself just with blue logo start FSX and even after a few hours, nothing happens. It would help if she had an error message, but nothing.  I have also reinstalled the driver for my NVIDIA GEforce 9400 graphics card and checked DirectX and its says its fine.  I have dual core 1.66 32-bit with 4 GB of ram.  Someone has any idea how to solve what Miss me my vol. I tried also to start with compatibility for Win Vista SP1 and 2 settings, as well as Win XP.  I can't get my WinTv Nova-t work either which suggests that it is a graphics problem.

  Hi AMrita,
  I always had the problem last night but I was check the forums and I now after much deliberation to be fixed.  When I go into the Device Manager, I checked all the drivers including the audio player and I was informed that they were all updated and works very well.  Although I had sounds and music I check the setting in 'Control Panel', but this is no software not loaded and nothing is even not a mistake.  I then tried to download the latest software and driver from Realtek for Audio ALC888 and got the following error while installing - an error (-5009: 0x8002802b occurred) previous installation did not finish.  On Googling this error I found a solution in one of the forums that was as follows: to

  Delete C:\Program Files\Common Files\InstallShield\Professional\Runtime - folder or rename it, just in case.

  and then run the windows 7 install for the sound card Realtek and it is now successfully downloaded.  The PC restarts, I started FSX and now its running fine.

  Thanks for the help... got in the end and think I could play music and watch a movie and the sound was very good.

• List of aircraft FSX "corrupted".

  In recent weeks, the list of aircraft (aircraft select) seems corrupt.

  Not all aircraft of can correct pictures (by clicking on a plane produced a plane 2 or 3 deleted in the list).

  Some devices have a title, but show a "?" on a chart to place an image.

  A plane that I can access through manufacturer (Bell and Boeing) have a picture but if I click OK I really get this aircraft.

  What happens and no matter what happens, I do?

  Kind regards

  PatManOz

  Pat Garard, Melbourne Australia

  Thanks for the reply,

  FSX is installed c/o Acceleration Pack that has all the patches.

  Last night, I spent a lot of time browsing files and folders SimObjects\Aircraft\ {AirCraftName}.

  I really have no idea of the required structure and files, nor how they work. However, I find the file THUMBNAIL of each TEXTURE for each AIRCRAFT - these seem to be used to build the aircraft 'catalogue' andsome were missing. Missing persons were downloaded planes.

  I also discovered a generic thumbnail that was present in the aircraft that had the "?" more graphic ' photo. I copied this generic thumbnail for all textures which had NO thumbnail.

  This apears to have solved the problem.

  Thanks again,

  Pat Garard, Melbourne Australia

• Problem of graphs with FSX on windows 7 64 bit OS

  Original title: operating FSX on windows 7 64 bit OS problems

  I finally managed to install FSX Delux on my pc running windows 7 64-bit OS.  After the first start, I select a flight and get nothing more than a flickering screeen with audio narration.  There is a drop down menu that will appear I am unable to interact with.  Finally, I stop the OS and restart to use anything other than what seems to be a "loop" effect in the FSX program.  The graphics do not appear and this is a relatively new pc with I5/AMD card :(  Can someone shed light on this problem that I would like to use the program?

  Hey firefox,.

  Here is an article from the Microsoft Knowledge Base that talks about graphics issues with Flight Simulator X. follow the troubleshooting steps. This should solve the problem.

  Solving graphic problems in Flight Simulator X
  http://support.Microsoft.com/kb/925722

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.