Type options pilot missing in jdbc connections

Similar Questions

• HP ENVY m6-1125dx: Beats Audio In/Out-put pilot missing AFTER Factory Reset/OfficeProgram reinstalling Windows

  Hello

  So about three months ago I had a problem with my HP mouse and browser. both were glitching on screen and does not allow me to type consistently or right-click (to copy, paste, etc.). After seeking help from technology College friends, HP reps (which were not useful since my ch isn't under warranty anymore) and work friends, no one would understand it. I decided to make a setting reset according to which did not help. Then, a factory reset. Finally, it fixed my problem, yay no glitching more! So I contacted Microsoft to reinstall my Microsoft Office. After I have reset a computer and everything was in order, I hung up with them. By attempting to play a video a few moments later, I noticed that my volume is not working. I tried through the Troubleshooting Device Manager (replied 'No audio device found'), by lifting missing audio drivers via the HP Web site (found nothing) and call Microsoft to see what they could do since HP reps no help. So far, no progress is possible except that Microsoft has discovered that he is no longer an audio in/out located on my device. This is absurd! My laptop was purchased 2 years ago for around $500 with award-winning special Beats Audio Sound System. I want to come back. I was forced to resolve the previous question myself and I wa slucky enough to find a way. But now, I am presented with an audio problem I'm afraid that I can't solve in my favor.

  If someone who comes through my investigation has informed business and education with a solution to the please my problem do not hesitate to contact me with your advice and your credentials. I'm willing to try anything at this point, but of course not at the expense of my computer. Experienced responses welcome!

  I hope someone can help me. Manager Microsoft is kind enough and plans to call me again today at 15:00. But, I really don't think there is anything else on our end that we can do. It's all HP to reinstall the audio driver Beats for me once again.

  Thanks in advance.

  Hello

  I do not work for a hardware or software company. Since your machine drivers support site, available for Windows 10, only the drivers that came with your machine (for Windows 8). Driver for Windows 8 above should work as ask you 'pilot missing AFTER factoryreset/windows.

  Kind regards.

• Disable the Dvorak keyboard type option left?

  I use an HP with Vista Home Premium, SP2 computer.

  I had a nephew to use my computer for a while and he installed the Dvorak keyboard type option left just to see what it was. Now, we cannot uninstall or disable it.  We went through the steps in linguistic environment several times and for each user on the computer (there are 2 more guest account, where the power is off). HOWEVER, the Dvorak option appears on the default login screen and I am required to change the layout of EVERY single time that I connect. It's maddening!  Is there something beyond delete language option and the keyboard that can solve this problem?  How can it be so simple to install this option, but it is almost impossible to get rid of?

  I even bought another keyboard (USB) and let that settle at the start, but the default Dvorak layout is always making fun of me. Please help me find my sanity.  Thank you.

  http://www.Kaufmann.no/Roland/Dvorak/WinXP.html

• Pilot missing after that the virus

  After a virus and need to upgrade to Vista, because of all the damage, the virus caused, during the restart I get a message of pilot missing for c:\windows\system32\juporoji.dll.  Anyone know where I can get this driver safely and where it takes place in Windows?
  Thank you

  Google finds almost nothing for it.

  It seems that you can still be infected with malicious software, or have a stay starting entry of for her.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that the Perform quick scan option is selected and then click on the Scan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button to view the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the problem persists, use this program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• pilot missing where it is

  c drive was full so installed new more got drive not passed windows 7 Edition family to year and windows 7 edition Professional charge unrelated to my hub high speed. error 651 hardware required relocation or the pilot missing. as it works well with the old drive there is only one thing no driver windows .reloaded twice more same error. (Are they still using us as guinea pigs to sort the bugs in versions of windows is is it just a mistake for once.) Somehow what is the fix

  Hello

  Thanks for posting your query on the Microsoft Community.

  If I understand you correctly, you cannot connect hub high speed and get error code 651. I suggest you to try the steps below and see if it helps you to solve the problem.

  First of all I suggest you to reset tcp/ip on your computer, to do that you can visit the link below.

  How to reset the Protocol Internet (TCP/IP)
  
  http://support.Microsoft.com/kb/299357

  Change TCP/IP settings

  http://Windows.Microsoft.com/en-us/Windows7/change-TCP-IP-settings
   
  I suggest that power you cycling your Modem and router might solve the problem, here are the steps:
   
  1 save all your current work, close all open applications, then shut down your computer. Wait a minute.
  2.first, turn off your router and wait a few minutes.
  3 turn off your modem.
  4. disconnect all the Ethernet cables are connected to the router and the modem and the PC.
  5. reconnect them and ensure that there is no connection drop between them.
  6.now, turn on your PC and let it boot.
  7. turn on the modem first, and after it is initialized, switch on the router.
   
  You can also try disabling the firewall/security software as appropriate and check if it helps:
  
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  I suggest also refer to this link that talks about the same issue:
  http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/af815085-fc76-458A-8116-98a06be817ea/

  Note: Ensure that you enable the security on your computer program.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Search programs and files option is missing in my Start menu.

  Start menu problem

  search programs and files option is missing in my departure menu.i uses windows7.can of assistance for me?

  Do you mean in the Start Menu search box is missing.

  If so, try these 2 methods...

  1. start > Panel > programs and features > column to the left, click enable features or disable > (wait for it to load) > scroll to find Windows Search > check the box in front > OK when finished.

  2. start > all programs > Accessories > scroll to find Run > until it clicks > in the run box, type services.msc > click OK > scroll to find Windows Search > until it clicks >

  left column, click on restart the service.

  Make sure that under status... He says Started

  under type of startup... it says automatic (d...

  IF not, right-click on Windows Search > properties >

  in startup type, click on the pointer, and then select Automatic (delayed start)

  to the service status, click Start

  Click OK when finished.

  Services output window.

  Reset.

  Search box is restored under Start menu?

• Windows 7 Home Premium set to upgrade to Windows 7 Pro via anytime upgrade - still missing Remote Desktop connection

  Hello. I upgraded a PC Windows 7 Home Premium to Windows 7 Pro via the anytime upgrade. My goal was to get the functional Remote Desktop connection so that I could connect to a machine at work. But, after the upgrade, activating the new W7 pro product and install all updates, still miss me desktop connection remote when I go to start / all programs / accessories.  Can someone tell me how I could get the files added to my machine?

  If you click on start, type: Remote Desktop

  It appears?

  You can also try the following:

  Press Windows key + R

  Type: mstsc.exe

  Press enter

  It appears?

• JDBC connection does not with ORA-12514

  Hi all

  I also have problems with the connection to the DB CARS because the listener does not recognize the name of the service. I read many messages from the forum itself here and elsewhere and I just can't understand it. Everything seems in order, so I'm a little confused as to why it does not work.

  Thus, some specifications: I actually use SAP as advanced application to connect to the DB.

  DB is RAC 11203, two nodes.

  OS: Linux RH6

  Headphones and remote headphones are a race to the top.

  JDBC connection string fails:

  JDBC:Oracle:Thin:@(Description=(Address=(Protocol=TCP)(Host=virtualhost1)(port=1527))(Address=(Protocol=TCP)(Host=virtualhost2)(port=1527)) (CONNECT_DATA = (SERVICE_NAME = MYSERVICENAME. «"" WORLD)))»»»

  I check that the service is available in the cluster:

  ORA. < dbname >. myServiceName.svc online on physicalhostname1

  When I check the status of the listener on node1 he mentions the MYSERVICENAME downstairs so it's here

  [oracle@physicalhost1 bin] $ lsnrctl serv < DBNAME >. WORLD

  LSNRCTL for Linux: Version 11.2.0.3.0 - Production on 2013-SEP-07 16:43:11

  Copyright (c) 1991, 2011, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (SDU = 32768) (ADDRESS = (= SAP COMMUNITY. (World) (Protocol = TCP (port = 1527))(Host=virtualhost1)) (LOAD_BALANCE = OFF)(Failover=on) (CONNECT_DATA = (GLOBAL_NAME = < DBNAME >. WORLD) (SERVICE_NAME = < DBNAME >. «"" WORLD)))»»»
  Summary of services...
  Service '< DBNAME >' has 1 instance (s).
  Instance ' < DBNAME > 001 ", State LOAN, has 1 operation for this service...
  Managers:
  "DEDICATED" set up: 0 denied: 0 status: ready
  LOCAL SERVER
  Service ' < DBNAME > 001 "has 2 occurrences.
  Instance ' < DBNAME > 001 ', status UNKNOWN, has 1 operation for this service...
  Managers:
  "DEDICATED" set up: 0 denied: 0
  LOCAL SERVER
  Instance ' < DBNAME > 001 ", State LOAN, has 1 operation for this service...
  Managers:
  "DEDICATED" set up: 0 denied: 0 status: ready
  LOCAL SERVER
  Service ' < DBNAME > 002 "a 2 occurrences.
  Instance ' < DBNAME > 001 ", State LOAN, has 1 operation for this service...
  Managers:
  "DEDICATED" set up: 0 denied: 0 status: ready
  LOCAL SERVER
  Instance ' < DBNAME > 002 ", status UNKNOWN, has 1 operation for this service...
  Managers:
  "DEDICATED" set up: 0 denied: 0
  LOCAL SERVER
  Service "MYSERVICENAME" has 1 instance (s).
  Instance ' < DBNAME > 001 ", State LOAN, has 1 operation for this service...
  Managers:
  "DEDICATED" set up: 0 denied: 0 status: ready
  LOCAL SERVER
  The command completed successfully

  When I check the node database in sqlplus

  SQL > show the service_name parameter

  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  service name string < DBNAME > 002, < DBNAME > 001, < DBNAME >, myservicename

  That's where. The database is running.

  I am spent days on this and I am unable to understand. I tried to re - register the name of service to SIR with lowercase, uppercase. In fact, when I joined the service I used capital letters, do not know why crsstat it shows always lowercase. Also in sqlplus I see lowercase. I do know that if it's case sensitive at all, but shows the despair that I really tried everything. I think that the fact that I am using SAP is not serious as long as any application - what is uses the thin JDBC connection string.

  Help, please.

  Your JDBC connection string requires a service MYSERVICENAME. WORLD, it should be MYSERVICENAME.

• Do not get the jdbc connection error

  Hi all
  I use ODI 11.6 and Oracle 11 g.
  I'm currently checking functionality of commit / rollback senario ODI.
  But I get the error in my procedure where I wrote a simple Jython script in command on source below RAISE EXCEPTION ("\N \N \N IS TOTAL COUNT: #COUNT\N \N \N")
  
  We need to write a Jython script for this check counting this is required to verify whether or not the validation works.
  
  Issue in this approach:
  
  I'm trying this way but has detected an error, don't know why its do not receive the jdbc connection.
  
  ODI-1281: Jython technology task Source select count is not of Type JDBC. When Source text and target orders are specified, the Source technology must be of type JDBC.
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.validateSrcIsJDBCDriver(SnpSessTaskSql.java:3529)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2877)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:558)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:366)
  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
  at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:292)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:855)
  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:82)
  at java.lang.Thread.run(Thread.java:736)
  
  Please suggest any entry.
  
  Thank you
  Lony

  just reverse the code... (take the source code to the target and the target to the source codes)

• In Bridge CS6, the 'Tools' tab option is missing the "Photoshop", the image of batch process

  Hello!

  Does anyone know why in Bridge cs6 in the 'Tools' tab, my "Photoshop" option is missing?  That's how I always treated batch images.  In Bridge, choose the images to process, I in the 'Tools' tab to the 'Photoshop' option then 'Processor of Image' and process.  Now when I go into my 'Tools' tab there no options: options and Cache rename batch, 4 types of related metadata.  Can someone tell me why this happened and how to fix it?  Thank you!!!

  Eric

  Hello Omke,

  This problem went on for two days.  I tried many suggestions but nothing worked immediately.  All of a sudden I turned on my computer last night and it's been fixed... inexplicably.  Don't know what worked, but something has.  Thank you for taking the time to offer advice.

  Best,

  Eric

• Follow incoming JDBC connections to the database server

  Hello
  
  We have a database of 10gr 2 on RHEL4. This database is mainly used by Oracle E-Business suite.
  External applications connect to the database using JDBC. Most of the time this configuration works very well. Sometimes, however, we get an error "no data to read from socket" at the end of the external applications. It seems to be a problem with the JDBC connections, but we could not even identify him. But I feel that the problem is NOT the end of the database. I just want to confirm that.
  
  To cut a long story short - is it possible to follow incoming JDBC connections on the database server? Of course, I can follow the actual sessions created for external applications. But is it possible that I can say that if the JDBC request reached the server database or not?
  
  
  Kind regards
  Ousseni

  Ousseni wrote:
  Thanks for the reply.

  Oracle RDBMS cannot differentiate between connection OPTION of any other flavor of the customer.

  Knew that :)

  listener registers EACH connection request, you get

  As the JDBC connection string is correct at the client end, I'll be able to find details of all applications for connection in the newspaper of the listener, even if some of them do not end up like connections to the database.

  PS: I do not belong to the sanctified tribu tribe of DBAs, so please excuse the obvious ignorance!

  Kind regards
  Ousseni

  Each connection request that gets the listener is registered; regardless of the success or failure.
  listener registers status = 0 for successful queries.
  listener registered status = (as 12514) for failed requests
  If/when the connection request goes wrong & can't seem to the listener, then the listener does nothing;
  Since he never received such a request

• CF10 MS SQL JDBC connection

  Hello

  I can't do with MS SQL 2008 Express Edition and CF10 JDBC connection. CF MS SQL Server driver works fine. I use this string to connect

  JDBC:SQLServer://127.0.0.1/myinstance:12345; databaseName = name of the database, but get the error this server is not available. I tried MS JDBC driver v3 and v4, but with the same result.

  May be using MS SQL Server driver is fine, but I had some problems with it on CF8 and CF9, as he said that this request was not exist. So, I had to use the JDBC driver. Maybe it's fixed in CF10. We will see soon, if I do not solve the above problem.

  Thank you

  Anton
  

  CF10 with it (that is to say by default + updated):

  On ColdFusion.

  Information System
  Server product ColdFusion
  ColdFusion version 10,282462
  Update level 02
  Tomcat Version 7.0.23.0
  Update level /C:/ColdFusion10/cfusion/lib/updates/chf10000002.jar
  Details of the JVM
  Java Version 1.6.0_29

  Pilot of JDBC MS SQL fails with:

  Connection verification failed for data source: NAME
  java.sql.SQLException: timed out trying to establish connection
  The root cause was that: java.sql.SQLException: timed out trying to establish connection

  CF10 change Java JVM to use:

  On ColdFusion.

  Information System
  Server product ColdFusion
  ColdFusion version 10,282462
  Update level 02
  Tomcat Version 7.0.23.0
  Update level /C:/ColdFusion10/cfusion/lib/updates/chf10000002.jar
  Details of the JVM
  Java Version 1.7.0_03

  Data Services & > Data Sources > MS SQL JDBC says:

  data successfully updated source (IE check OK).

  Beware of drive. Why use Java 7? I had that Java already installed and it was easy for me to sweep CF10 above and use it. Adobe CF does not support Java 7, but it may make more sense to use Java 6 (1.6.0_35?) tho also keep in mind CF Adobe do not officially support beyond 1.6.0_29.

  HTH, Carl.

• The tab broadband is weak and his option is missing in the wireless radio software

  Hi all

  I just bought this model Lenovo ThinkPad X201T 2985-DLG tablet before yesterday. Since then, I try to use my card SIM G3. Tab broadband is weak in the dial-up connections, and I noticed that his option is missing in the wireless radio software.

  I contacted the support (the Saudi side of IBM) SBM team and they gave me with a link to a very long list of drivers the most that are for other versions of the OS. I noticed that most of the suggested drivers were already made and the Thinkpad is up-to-date including the bios.

  to confuse more, I do not have my SIM card so far. I'm in the fight to get the bandwidth (WWAN) living.

  Any suggestions or solutions will be highly appreciated.

  Abdullah Al-Azraqi, PhD

  College of Health Sciences

  University of Dammam

  You can find compatible cards here:- http://www-307.ibm.com/pc/support/site.wss/migr-70697.html#10

  Yet once, you do not have wimax option, your wireless card is only Intel AGN.

  I hope this helps.

• Taking JDBC connection configuration supported the RAC in Oracle SQL Developer?

  How can one Oracle SQL Developer be configured to successfully connect to a [Oracle RAC | http://en.wikipedia.org/wiki/Oracle_RAC] environment, that is, not only the installation program always to connect to one of the individual nodes?
  
  [http://programmersjournal.blogspot.com/2008/08/jdbc-connection-string-for-oracle-rac.html] is an example of a classic and taking version supported the equivalent CARS of a JDBC connection string. I've used a CAR of the same format connection string from within Java applications custom without problem. I thought that the same thing should be configurable in Oracle SQL Developer, by setting the 'Connection Type' drop-down menu on "Advanced", then enter the connection string JDBC RAC-aware as "Custom URL JDBC". However, after the test connection, the following error message is displayed at the bottom of the dialog box:
  
  Status: Failure-Test failed: IO exception: NL Exception has been generated
  
  There is no additional information shown on the display 'Page Logging'. With the help of Oracle SQL Developer 1.5.5.
  
  Thank you!

  You could always give the current 2.1 ai2 test... continuous development may have fixed the issues in this area...

  Hope that helps,
  K.

• ADF: Management graciously JDBC connection errors?

  Hi gang
  
  We have a use case view a specific web page when the JDBC connection falls on our ADF application, specifically the following error:
  
  oracle.jbo.DMLException: Houston-26061: error when opening JDBC connection.
  
  I did research on solutions to this and came up with a solution of proximity to place the following entry in the application's web.xml file:

  <error-page>
    <exception-type>oracle.jbo.DMLException</exception-type>
    <location>/MyErrorPage.jsp</location>
  </error-page>

  This works very well, but is a blunt mechanism because it captures all the DMLExceptions which includes failures of insert/update / delete, as well as the fall of JDBC connection on the.
  
  Everybody comes back with a better solution for the treatment of the JDBC connection drop-outs?
  
  Thank you and best regards,
  
  CM.
  
  PS. (JDev 11g build 5188, ADF BC + ADF Faces RC)

  Hi Chris,

  Caveat: I've not tested this - just think aloud at this stage before my departure to catch a train...

  Could you do that in a custom class of DCErrorHandlerImpl? I don't know if you are authorized to make a redirect in reportException or not - I'll have to try that.

  John