Types of ports FI

Similar Questions

• What type of port SATA is it?

  Hello.

  There are two SATA ports on this picture that aren't like something I've never seen before: Red (SATA4) and black (SATA5) ones.  What kind of connector works with this kind of thing?  I tried the splined type 'L' and I do not see that it will work. Or maybe I'm missing something?

  

  Hello

  You can use one of these sata angle left to right sata cables.  It would apply either a left or right sata plug.

• Is what type of port HDMI in HP Pavilion DV6 Entertainment Notebook PC series?

  I want to buy an HDMI cable to connect LCD TV with my HP Pavilion dv6-1161tx Entertainment Notebook PC. I'm not sure wheather it's a size normal HDMI or Mini HDMI port on laptop!

  If anyone can confirm?

  See you soon

  I'm sure that its HDMI standard size, seems to be the same size as what is on the TV

• How to allow a port restricted?

  I'm trying to access a specific port and Firefox blocks access, https://x.x.x.x:xxxxx. This is the message:

  This address uses a network port that is normally used for purposes other than browsing the Web. Firefox has cancelled the request for your protection.

  How can I allow a specific port?

  The address contains a number of unusual port after the colon, such as:

  Example.com:9876

  You can create a preference by typing about: config and leave the port number that is blocking Firefox. Here's how:

  Select (0) and copy the following preference name

  network.security.ports.banned.override
  

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste the ports and make a pause so that the list is filtered

  If the preference listed above are:

  (3) double-click it and add a comma at the end of the list, followed by the port number that you must allow. No spaces. And then click OK.

  If there is no preference listed above:

  (4) with the right mouse button anywhere on the page and choose new > String

  (5) in the name preference dialog box, paste the name is facing you, and then click OK

  (6) in the preference value dialog box, type the port number, you need to allow, and then click OK.

  Please see the screenshot for example joint.

• Spectrum of HP 13-v013tu: USB port not working not not the spectrum 13

  Hello.  I bought the HP 13-v013tu a few months ago spectrum and in general the laptop works very well.  However, I noticed that 3 C type USB ports in the back, one of them do not work.  The USB port for the electrical connection to the right is fine, but the two in the Middle, one of them work.  Who does not work does not recognize or even to send power what it is connected (for example, the mobile phone, the external hard drive, load wireless mouse).

  I checked the Device Manager and see nothing wrong in the USB options.  Even the option of power management to allow the computer to turn off the device has been disabled.

  Can anyone help? Is this a hardware problem?

  Thank you.

  USB - C for USB 3 adapter supplied with the laptop you are using? If it works in 2 of the three ports, then the logical conclusion is that the third part is bad. You can actually power the laptop of one of the Thunderbolt-C/USB ports (I have one of these laptops) in order to try in the port which is giving you issues and if he does not have the power, then you have a dead port which will require the replacement of the motherboard.

• Satellite Pro M70: What USB 2.0 Port Replicator is compatible?

  Would be grateful if someone could advise me on the purchase of a USB 2.0 port replicator.

  I think the 3 USB 2.0 ports on my laptop Pro M70 are not enough, and that's why I want to buy a USB 2.0 Port Replicator.

  The site of the Toshiba shop specifies USB 2.0 Port Replicator II (UK) with port network, part number: PX1173U-1PRP, price: 49,93 GBP.

  It has 4 USB ports 2.0, which would give me a total of 6 USB 2.0 ports, which would be the absolute minimum I want. (It also has 2 PS/2 ports, 1 serial port RS232 and 1 USB 2.0 port network that takes in charge rates of 10 / 100 Mbps).

  Can anyone tell if it is powered by the laptop, or by it's own adapter?

  Unfortunately, the Web of Toshiba site has advised that it is currently out of stock and are difficult to get in on all the time, as they are the subject of a sort of "green manufacturing" test.

  This prompted me to consider buying a replicator USB 2.0 ports alternative and all I would prefer one with more than 4 USB 2.0 ports, and in fact 6 or more USB 2.0 ports would be preferable. I'm not really interested in other types of ports that are often provided with the replicators of USB 2.0 ports.

  I would be grateful if someone could recommend/Advisor at a replicator USB 2.0 ports alternative that would be compatible with my laptop Pro M70.

  One of my concerns is how the port replicator USB 2.0 Port is powered. I think I would have preferred that the unit is powered by its own adapter, I understand is 5 Volts with 500 milliamps for each port, rather than to the laptop (probably would be less tax on the laptop, with less heating).

  Thank you
  AlanCB

  I can't comment on the question whether the Replicator you mention has its own power source, although I suspect, he does

  However, I have a satellite Pro M70 too and with a similar problem and wanting a hub to connect to all my external printers, Sandy etc using just one connection, I buy PA3390E-1MPM - a hub of Toshiba, Audio/USB multimedia center, which goes a step further and provides a hub not only for USB sources , but also for the speakers etc.

  It has its own power supply to the unit and connects via USB 2.0 to my laptop. It is also stackable with the Toshiba Gigastore 250 GB USB 2.0 external hard drive (PA3392E-1MPS) which I also use for backups, storing external data etc.

  Had the two units for 3 months now and everything works fine. I got headr of some problems with people in loss of access to the hard drive, but it seems that it was never if it has been disconnected by pulling the cord out usb, rather than make a ' Safely Remove Hardware to disconnect the USB device and so far have had no probs at all

  It has 4 ports, more port network and connections from the speakers for the configurations 2/2.1/4/4.1/5.1 full, more Creative software like drivers, more remote control useful to control audio devices. Oh, and also a Surround sound, and EAX

  Maybe a little more of your option, but worth it in my opinion. If you can't find it on the Toshiba site I have purchased from www.insight.com

  Hope that helps
  Steve

• Is the Satellite A200-10W supports a PCMCIA slot II type

  I want to know if the side slot on the satellite A-200-10w is a PCMCIA type II port and if not, adapters external usb for the same thing?

  Hello Hari

  Satellite A200-10W does not support PCMCIA location.
  The A200 supports only the Express Card location that is placed on the left side for laptop.

  > I get external USB for the same (PCMCIA) adapters

  Don t think so. I didn't see any USB key that would allow any PCMCIA interface.

  But I rally don't know why you want to use a PCMCIA card if the Express card slot is available.
  Using cards designed for Express card slot ;)

• Port forwarding on Time Capsule for Geniego

  Anyone know how to configure the port forwarding on time capsule?

  I need to set a port 8082 & 8083 for my Directv Geniego.

  Press the bar area and order at the same time.

  Airport utility type, press ENTER.

  Select time capsule, and then select edit (enter the code for the device).

  Select network, select "+" sign

  Firewall entry type: IPv4 Port Mapping

  Description: GenieGO

  Public UDP: If manual of the Consult of UDP user, enter the numbers of the port here (use commas to separate).

  Public TCP: If manual of the Consult of user TCP, enter the number in port here (use commas to separate).

  Private IP address: IP address of your GenieGO

  UDP private: same as the public

  Private TCP: Same as the public

  Select Save

  Update of TimeCapsule.

  Test.

• parallel port Laserjet 1100

  I have a HP Laserjet 1100, which is still going strong. None of my current laptops have a parallel port connection. They all simply the USB ports. So I decided to go and buy a parallel port print server

  (StarTech.com 1 Port 10/100 Mbps parallel network print server (PM1115P))

  http://tinyurl.com/6ct36xf

  to connect the printer directly to my network Amazon home.

  It arrived today and I discovered that the print server is parallel port is different from the one on the LJ 1100, which is much smaller.  If the connection of the printer port must not be a parallel port, I thought.

  So, I have to go back to Amazon. My question is: what type of port the 1100 there if it is not a parallel port? What type of print server do I need to connect it to the network?

  Thank you.

  Correction:

  I need a converter of males (HP) mini parallel centronic female parallel .

  Maybe it's the right pair.

  http://www.Amazon.com/Centronics-to-mini-adapter/DP/B001JYVEW4

  I'll check.

• Many of us have FMS RC helicopter/plane controllers who do not work on Windows 7 due to a non-existent port. How can make us it work?

  Windows 7

  Hello

  What port are you looking for?  If the post is not there, you need more likely to buy a PCI card with th port type you're looking for.  USB port should be available.  If you are looking for a different type of port, you need to add an additional PCI Express card.  In addition, please check the with OEM of the controller to check if the device is compatible Windows 7.  I suggest you contact th OEM for extra support.

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Aspire Port mystery r5-571 (R15)

  When upgrading my memory, I noticed a port that looks like a port of m2 but has only 4 pins on the right side instead of 5 pins I would wait for an m2 or a PCI Express port, at least I know. No one knows exactly what type of port it is? If I could add storage or any capabilities it so I'd like any info on this would be useful.

  Image is attached.

  Port of 2280 m2 for SSD

  It is one of the SSD M.2 supported:

  Flash drive SSD SAMSUNG NAND 512 GB MZNLN512HCJH LF + HF PM871 512 GB M.2 2280

• Port forwarding on several computers

  Hi I just bought a Wireless Linksys WAG325N router. I usually about 2-3 machines on my network WIFI and I'd like to enable the port forwarding for each of them on a particular port. It is easy to do for a single exact machine - simply type the port number and IP of the computer to the configuration - but the problem is - I would do it for each other: example: enable the port forwarding XXXX for 192.168.1.100, 101 and 102. Help, please? Thank you in advance.

  It is the application load in a sense. You can change the assignment of external ports to resolve the correct internal port on each machine.

  Say for example using rdp that uses (port/protocol) tcp/3389 (RDP client) application actually allows you to change the external port to connect to, if you specify after the investigation period. If for example say we have rdp access to all 3 computers in the outside world. We can configure the port forwarding on every computer

  (Computers)      (internal IP addressort)            (External IP/port)

  COMP A 192.168.0.5:3389 203.x.y.z:3389

  Model B 192.168.0.10:3389 203.x.y.z:3390

  Model C 192.168.0.15:3389 203.x.y.z:3391

  It is the purpose of a router to create routing tables.

  Of course, you will need to remember which ports are assigned to which device.

  It is certainly dependent on the application. Find out if your application or service supports changing the port, ftp, rdp clients, tftp, ssh all do... Most of the 'Good' services are, as those who built it were considered in a NAT environment.

  NAT network address translation =

  Most of the things if not at the level of the applications, services even in windows are tweakable via the registry. I wouldn't say that that if you don't have experience relavent. You potentially make your workstation unusable if you're wrong.

  I hope this helps.

• Unable to opena a port through Windows Firewall in Windows 7 Home Premium

  Original title: opening a port on Windows 7 Home Premium

  Each answer to this question does not apply to my pc because of this: when I open the Panel it is not a Security tab, but there is a tab to go directly to the firewall, and there is no button in the firewall to add a port.

  Any help would be massively appreciated, thanks :)

  Hello

  According to the description, I understand that you are not able to open a port in Windows 7 Home premium.

  Please follow the steps below to check if his help.

  1. Open Windows Firewall by clicking the Start button, click on the Control Panel, clicking Security, and then click Windows Firewall.

  2. On the left, click on advanced settings.

  3. On the left, click inbound rules. Then, on the right, under Actions, click the link of the new rule.

  4. Select the Port marked option and click Next.

  5. In the specific local Ports box, type the ports that you want to open, separated by commas, and then click Next. (For example, in this case, the TCP ports must be open are 418, 419, 420 and 421.) The wizard takes measures and open ports to receive data.)

  6. Select allow the connection, and click Next.

  7. Check the boxes for private or any other type of desired network and then click Next.

  8. Type a name (usually the name of any program to open). Click Finish.

  Hope this information is useful, if the problem persists please write us back with the quick information so that we can help you further.

• Unlock Port 1947

  How can I unlock port 1947?

  Hi Sandra,.

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you want to open the port using Windows 7.

  Try the steps.

  1. open the Windows Firewall by clicking Start , clicking Control Panel, clicking Security, and then clicking on Windows Firewall.

  2. click allow a program through Windows Firewall.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. click on add port.

  4. in the name box, type a name that will help you remember what the port is used.

  5. in the Port number box, type the port number IE 1947

  6. click on TCP or UDP, depending on the Protocol.

  7. to change the scope of the port, click Change scope, and then click the option that you want to use. ("Scope" refers to the set of computers that can use this port opening).

  You can also view the article as well.

  http://Windows.Microsoft.com/en-us/Windows/open-port-Windows-Firewall#1TC=Windows-7

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Errors of run Switchport Port-Security

  So I'm a bit new to switchport security.  I work on most of the ports in one location.  Its ports where I either switchport voice and switchport access VLAN or just switchport voice VLAN.  For some reason, these types of ports going into err - disable.  Here are a few examples.  Indications as to why it would stop even when I have the right MAC address would be very useful. Interface Fa0/3 has a phone attached to it and a connected computer the phone is off.

  interface FastEthernet0/2
  Description Table phone
  switchport mode access
  switchport voice vlan 2
  switchport port-security
  security violation restrict port switchport
  switchport port-security-address mac 34a8.4ea6.0f95
  spanning tree portfast

  interface FastEthernet0/3
  SAM PHONE x 1623 description
  switchport access vlan 3
  switchport mode access
  switchport voice vlan 2
  switchport port-security maximum 2
  switchport port-security-address mac 442b.031a.2975 - phone MAC
  switchport port-security-address mac e840.f223.8842 - MAC computer
  spanning tree portfast

  2 442b.031a.2975 DYNAMICS Fa0/3

  2 34a8.4ea6.0f95 DYNAMICS Fa0/2

  The newspaper says this whenever I turn on port security.  Any other port where there is only 1 VLAN or 1 device, it works fine no problem.

  27 June 2015 23:59:56: % PORT_SECURITY-2-PSECURE_VIOLATION: security breach took place, caused by MAC address 34a8.4ea6.0f95 on port FastEthernet0/2.
  June 28, 2015 00:00:01: PM-4-ERR_DISABLE %: psecure-violation error found on Fa0/3, putting the Fa0/3 in State of err - disable
  June 28, 2015 00:00:02: % LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/3, changed state down
  June 28, 2015 00:00:03: % LINK-3-UPDOWN: Interface FastEthernet0/3, changed State to down
  June 28, 2015 00:00:04: PORT_SECURITY-2-PSECURE_VIOLATION %: security breach took place, caused by MAC address 34a8.4ea6.0f95 on port FastEthernet0/2.

  I know I'm missing something because I am new to using switchport security.  I am wanting to lock the ports to prevent devices not allowed to plug in on my network.  I have disabled all DHCP, but I want to take a little further and prevent them to enter the network even and probe the network.

  EDIT - You forgot to mention that it is a 2960 version 15.0 (2) SE5

  Thank you

  David

  David, Kevin,

  Let me join you.

  The way I see the Fa0/2 work with its original configuration is:

  • The maximum number of secure MAC addresses is 1.
  • Access to the VIRTUAL LAN is 1, the voice VLAN is 2.
  • The static safe MAC address 34a8.4ea6.0f95 is added to the access VLAN, not to the voice VLAN
  • When the phone starts to make known by the voice VLAN, MAC address cannot be dynamically added to the list because the maximum allowed number of MAC secure is 1 and the list is already full. The fact that its MAC address is configured statically is irrelevant, because it is not associated with the voice VLAN.

  Try to delete the line

  switchport port-security-address mac 34a8.4ea6.0f95

  and replace with

  voice of vlan switchport port-security-address mac 34a8.4ea6.0f95

  and see if it solves the problem.

  Best regards
  Peter