U400 updated Touchpad

Similar Questions

• Satellite U400 - 10L - touchpad no longer works

  Suddenly, my touchpad doesn't work.
  Any suggestions that might help with this problem?
  My laptop is Satellite U400 - 10L

  Hello

  I think that you should first check if the touchpad is not disabled.
  Check the FN + F9 key combination.

  If the touchpad still does not work, try reinstalling the driver for the touchpad.

  Welcome them

• Satellite U400 - update BIOS for Vista 32 bit to Windows 7 64-bit

  I currently have Vista 32 bit on my U400. I intend to do a clean install of Windows 7 64-bit. I downloaded all the necessary drivers on the Toshiba site for the 64-bit Windows 7 update. I noticed there is a BIOS of Vista 64 bit driver. Do I need to install this before you proceed with the installation or after?

  So, is there a particular order to install all the drivers, utilities and applications?

  Thank you

  Hey Buddy,

  Normally, this update of the BIOS must be made. You will need to use all the features of your laptop.

  I have improved my U400 Vista 32 bit to Vista 64-bit. After this update I started the update of the BIOS. Everything worked properly during this procedure because I closed all programs that are running (also AntiVirus/firewall) and was registered as an administrator.

  About installation order I didn t find a specific list, so I used this command:
  -Chipset
  -Display
  -Sound
  -LAN
  -WLAN
  -Card reader
  -...

• Satellite U400 - update BIOS issue

  Hello
  I thought that I've updated the BIOS, but when I downloaded the file tohsiba and installed maybe I did installed it wrong I should change in the settings or something because the version of the BIOS is good it displays the latest version: TOSHIBA V4.80
  But on the SMBIOS version it shows the oldest a ver 2.5, please someone can tell me or show me how to upgrade that to?

  Here's a picture of you guys show what I mean:

  [http://img24.imageshack.us/img24/8007/screenshot001mc.jpg]

  and because in this version of the bios so there manny settings if I click on: Advanced settings: FLAGS, DMI and DEVICES but on DMI and I see 'Category' and there motherboard, system, chassis, OEM parameters and others, may be I should click then it will change in the new version even in not only the BIOS and SMBIOS or?

  Thank you

  Hello

  What version is broadcast in the BIOS settings?
  Go to BIOS and check this!

  Usually, we should see version 4.8
  If your update of the BIOS has been updated correctly, you will see the v4.8 in BIOS settings.

• Touchpad doesn't scroll after installing Windows 10

  Hey guys,.
  After you have installed Windows 10 my touchpad doesn't scroll more
  Can you help me?

  Try to uninstall the driver for the touchpad from the Control Panel, and then run Windows Update to install the updated touchpad driver.

• ScrollBar NB100 touchpad stops working after exit full-screen mode youtube

  I have some Toshiba laptops, satellite and now netbook100.

  All share a problem, the touchpad scroll bar:
  It stops working after you exit the full screen in youtube.
  Here's how to reproduce the incident:

  1. with the help of any mainstream browser, start playing a video on youtube, click on the button at the bottom right of the video full screen.
  2. click on [the cross] to exit full-screen. (next to button full screen.)
  3. check if you bar scroll that still work.
  4. a reboot will restore function.

  Currently I m on vista, I think that you will have the same problem under XP.
  The search in google (scroll touchpad bar stops full screen youtube) return more people will share the same question but no answer.

  Environments: win xp all, win vista all.
  All decks, Windows Update driver, updated touchpad driver.

  This is not a major technical problem, but for a netbook, it's very annoying.
  If anyone has this problem or answers, please share it here.

  Thank you in advance.
  Kind regards.

  To be honest, it's the first time I read on this issue.
  I m not a NB100 owner but I have a laptop and I m using IE as your browser and Windows XP.
  I checked this and my touchpad is not working correctly!

  I m wondering if this behavior would appear only the website youtube?  :|

• Questions of Touchpad on Satellite A100

  Hi all,

  My name is Bill, and I bought a Satellite A100 6 months.

  I am facing a strange problem with my touchpad. More precisely, the right button does not respond. Sometimes it automatically snaps and other time she made a left click unlike my settings that I put to right click.

  Usually, I use a USB external mouse and I do my job all of a sudden the right button is clicked without clicking.

  The most interesting is that I sent my laptop to my local service and they had replaced the touchpad with a new, but after a while (about 1 month) the problem reappears.

  Can - what someone knows something about this? I gather that maybe the motherboard is responsible, but I'm not sure.

  I want to note that I checked almost anything on software problems (I used the recovery CD, I installed new drivers for touchpad, I watched updated touchpad and so on)

  I think I'm very unlucky.

  Kind regards

  Bill

  Hello

  a solution would be maybe to send your machine to your servicepartner once again and to quote the problem persists.
  If they ask you, then tell you think so it may be something with the main card. Then they will check it properly.

  :)

  You know, if you have already checked everything, this may be a hardware problem.

  Welcome them

• HP 15-f337 Touchpad settings forget... tried everything

  I have a laptop of 15-f337 nine HP supplied with Windows installed 10.  I've updated touchpad drivers and all the recent Windows updates.  Still the touchpad restores the settings by default whenever the power is turned on.  I don't want the tactile click function.  I searched this forum and tried all the solutions and I have concluded that it is a design flaw that has not been resolved.  Looks like HP is at a standstill and hoping people will give up.

  Hello

  Try the following.

  Hold down the Windows key and press R

  In the run box, type regedit and press enter

  In the registry editor, navigate to the following

  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

  Inside, look for a key named DeleteUserSettingsOnUpgrade

  If it is present, right click on the key and select Edit

  Set the field data of the value 0 (zero) , and then click Ok.

  Close the registry editor.

  Make the Synaptics setting changes you need in the usual way and save them, and then check if they are now kept after a reboot.

  Kind regards

  DP - K

• Elite HP book 8560p: frozen touchpad

  Product REVIEW of BIOS and XU063UT #ABA 68SCF VER number. F.61

  My touchpad is frozen. I was dragging a few photos in a file. May touch some other keys at same time to use the touchpad. A light appeared in the upper left of the touchpad and the cursor is frozen. I read some of the answers forum & tried a few suggestion. The power one of the battery first, no change. I downloaded updated touchpad software, no change.

  I will add for the last year the touchpad seem to start to lose the tactile function of right to left, was living with her. I tried the zone configuration of the touchpad, it would work on the Setup screen only. Most of the time I hit the key several times to get an action to happen (on the left side of the button).

  CORRECTED, after reading from HP website, determined somehow the touchpad has been disabled. Unknown how. Light was in the upper left corner of the button was. Hit the corner turns twice.

• Mouse Touchpad on Satellite A105-S6980 does not

  Trackpad works but not the buttons of the mouse. Reinstalled driver but did not help. 7 the window running. Trackpad is turned on. Parameters for the trackpad in the control panel appear to be correct. Problem started when someone typing on my computer using Word.

  Hey Len,

  Thanks for posting your query in Microsoft Community.

  I understand from the information you have provided to us, that the mouse buttons do not work in Windows 7. I will certainly help you in this matter.

  This only happens with the word application or any application?

  Please follow the methods.

  Method 1:

  Run the troubleshooter from the link.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-za/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Updating touchpad drivers and check if it works very well.

  See the link.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you face problems more when working with Windows Mail on the Microsoft Community Forum.

• Satellite T130 N - touch pad

  My N t130, press, left and made a right click of buttons stopped working. an external mouse works fine. Computer still in warranty period

  Any suggestions?

  Ravi

  > My N t130, press, left and made a right click of buttons stopped working. an external mouse works fine

  Check if you did not disable yourself. I don't know much about your model, but usually you can do with fn + f9. On my laptop, it has a touchpad enable/disable button, to check your. Remove the usb mouse to check if it works, I know if you conncet the external mouse touchpad disable.
  Updating Touchpad drivers:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  If is not always work, restore the factory settings. Otherwise, it may be a malfunction of equipment

• Keyboard/mouse Lenovo z510 problems

  A few days ago I bought a Lenovo idea refurbished z510 and the keyboard and mouse are defective wildly. When I'm typing anything, after a variable amount of words the cursor either high point / return back/moving/crush, which led to delete me sentences and paragraphs or makes me take much too long to type simple messages/documents (for example, this message). I understand there is a risk that I took with the purchase of a refurbished laptop, but it is aggravating that I can not any work done and none of my troubleshooting techniques work. I'd appreciate any help!

  Hi 9inchnails,

  Welcome to Lenovo Community!

  According to the request, we have understood that you are facing problem with the keyboard and mouse of your computer laptop z510.

  As you mentioned that if you type the cursor will highlight or BACKSPACE.

  Please check external keyboard and mouse to the question.

  Updating touchpad drivers and check the issue.

  Click here for drivers according to the operating system.

  I hope this helps! Publish us back for other queries.

  Best regards

  Ashwin.S

• Why used my right click menu disappear?

  anyway I put my mouse, right-click menu appears, even if I right click and I can't seem to stop. It takes ages to type anything because I have to click and then move my mouse to a place where a right click menu will not pop up.

  Morgan23,

  Hello, this problem starts after installing new programs? It's a laptop? I've seen that happen before and updated touchpad drivers helped. Also, please do a full scan with your antivirus. Please post back with more information, if it does not help.

• G62-340US: laptop freezes constantly

  HP G62 - 340US Laptop, 3 GB, AMD Athlon II PC340 Dual Core 2.20 GHz, Windows 7 64-bit (product #XH066UA #ABA)

  I just can't take more.  Since the first day, this laptop has been poor performance.  Hang in there too.  Takes forever to open a program or a browser.  Anytime you click anywhere, the blue spinssssssssssssss circle.

  How can I reformat to factory settings if I do not all discs?  I don't think this will fix the issue because it was so out of the box.  I tried so many different things to boost performance (updated touchpad driver, updating the bios, remove the starting applications, etc.) but it does not matter.  I was going to upgrade the RAM 8 GB / 3GB, but I don't think that it should be considered to prevent him from hanging.

  Just want to go back to factory settings and re - assess.

  Thank you.

  @Barbenae ,

  Hello and thanks for the display on the HP support forums.

  With a laptop computer hooked up here there's several reasons for this.

  Have you cleaned your laptop to reduce the accumulation of things on the heatsinks and fans for the laptop can be cooled?

  Have set you your system power settings?

  Did you run the diagnostics of hardware BIOS to see if it is a RAM problem or hard drive?

  If this is not the case, here are a few links to check.

  Test a hard drive from BIOS

  Laptops HP - diagnostic system (F2)

  PC HP hardware diagnostics

  Regarding the recovery of the system, there is a link on how to do so.

  Performing a recovery of HP (Windows 8) system

  I hope this helps you.

  Thanks again for posting and have a great day.

• My cursor jumps to the right and cannot use it for games. Have the Toshiba laptop and Windows Vista Edition using Home Premium pack 2

  my jumps to cursor to the right of the page and will move for me when you play as Bejewelled. Have laptop Toshiba and use Windows Vista Premium Pack 2.

  Hello
  You did recently change?
  It is while you use other applications?
   
  I suggest that you update touchpad and display drivers for the cards and check.
  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in Device Manager, locate the touchpad, and then double-click the device name.
  3. click Driver tab, then click on set to update driver and follow the instructions.
  4. now Locate Display Adapter and then double-click the device name.
  5. click Driver tab, then click on set to update driver and follow the instructions.

  Now, try to follow the link provided to update a hardware driver that is not working properly and check the question below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  You can also change the touchpad settings and check.
  To do this:
  1. click on start
  2. click on Control Panel
  3. Select mouse and then check the settings
   
   
  Thank you, and in what concerns:
  Swati Keni-Microsoft Support