UAC is not asking for credentials for installers

Similar Questions

• Apple Watch does not ask for password

  In recent days, I discovered something disturbing.  If I take off my Apple Watch and put back on without having to type in the code 4 digit, even after an extra charge per night, it will not ask for a password after an hour or two and works normally.  If it's supposed to happen?  I couldn't find anything in the support forums.

  I got my setup shows to use a password because I got it last December.

  Suzanne

  Hi Suzanne

  If you use the following settings:

  -On your iPhone, in the application of Eve, go to: My Watch (tab) > General > detection of wrist - on.

  -On your iPhone, in the application of Eve, go to: Watch My > password > enabled.

  -Also on screen settings of password - unlock with iPhone turned on.

  Then, after putting on your wrist, your watch will unlock after whatever you do first: unlock your watch manually (by entering the access code) or unlock your iPhone.

  Then, it will remain unlocked (including when the screen is idle) until you remove it from your wrist. When you remove your watch, it locks automatically.

  More information:

  https://help.Apple.com/watch/#/apd748b87e2a

• Stor.E Slim 1 TB does not ask for password

  So I put a password on this disc using the supplied software.
  Then I took to use on another PC and it will not ask for a password?

  Do I have to install the software password on all laptops / PC that I use?

  Lock password software is needed to define the password reset / clear the password already set.

  If the HARD drive / data on the disk HARD has been already locked, you should always asked a password in case you want to access the protected data.

• When I start my computer, it does not ask for my password and it does this since I got it!

  Hello! I had a bit of problem my computer! Every time I have start or restart, it does not ask for my password! I have a big family and I only used of the on my account! I got the editable or something like that! I mean I can delete others has put some programs and all that! But when I start my computer, it does not ask for my password! Just open on my account! I already try to reset a password and everything and it does not work! But when come from my screen saver and I want to go she it ask for my password and it is normal that is what I want and when I she ask for my password, but if I restart or close and open it again it open on my account so EVERYONE can go on it! So please help me! Thanks to all the people who read this and thank you to all who will help me!

  Hello mk_wolf_69,

  Please see the link below with respect to automatic logon.

  How to enable the automatic logon in Windows XP

  http://support.Microsoft.com/kb/315231

• Error message: Picture.library.ms no longer works. Tried to remove the library as suggested but does not ask for confirmation delete a few deletions without asking for confirmation.

  Error message: Picture.library.ms no longer works. Tried to remove the library as suggested but does not ask for confirmation delete a few deletions without asking for confirmation. Also don't undersatnd how then restore you the other context using the trash of the library? Don't understand that your instructions please the ventilation in portions of beginner. Is - this recurring issue is sought in microsoft?

  Hello

  You solved the problem with the photo library?

  You have been informed that the question about the image library is fixed in the next thread.

  http://answers.Microsoft.com/en-us/IE/Forum/ie11-iewindows8_1/you-tube-videos-do-not-play-after-updating-to/ce05a70a-3548-44e7-b5ed-2602df641dca

  If you are now facing problems with videos from YouTube on Internet Explorer 11, try the steps in the above thread link and check.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Mail does not ask for new password after change

  I had to change the password for my email account based on Yahoo (sbcglobal dot) net because the hack/spam. It's the second time in 6 months, and I'm having the same problem that took place the last time. After changing the password through webmail interface for the account and which confirms that change has gone through by a disconnection and return again on webmail with the new password, I estimated that the Mail on my MacBook Air (OSX 10.11.4) app so the Mail on my 5 c iPhone iOS app are still happier never to communicate with Yahoo Server , sending and receiving mail, despite never forces me to put the new password.

  This is obviously less annoying than the problem where Mail asks password constantly, it should not all too obviously work in this way. If one of these devices were lost or stolen, I know now that I could not get this email account by changing the password. Apple support tell me that deleting and then reinstalling the account in Mail should solve this problem, but *? I won't be able to do if a device is never lost/stolen. Something is clearly abnormal in the way Mail communicates with this Yahoo Server and Apple needs to fix this on their end!

  OK, I'm a monumental fool, apparently, but so are at least half a dozen Apple Support "geniuses."

  I have iCloud active keychain. Therefore, this behavior is expected. Keychain passes the new password information to both the MacBook and the iPhone instantly after that I changed it on the MacBook via the webmail interface. No Mail app should ask for the password, because they already have through keychain.

  So I feel very stupid, but then again I am not a geek, and I'm not paid to know these things. What is their excuse? Why zero agents Support of Apple knew it was happening, or think to ask about it? Why was their first step to remove, then reconnect the account, which took me less than an hour from the last time I did, apparently unnecessarily? Honestly, one wonders if anyone knows how to do their job more.

  / end of rant

• Windows will not ask for password after disconnection and stop

  machine is aspire R13, WIN 10

  I set up a password for OS - on the machine, do not use a windows account. After the outside panel and closure, opening the lid takes me straight on the desktop without having to ask for a password. What is a password, if anyone can open the lid and have access to everything?

  If instead of disconnecting and leaving the computer to sleep, so he asked a password to wake up - as if an unknown person will have access to the computer to wake up from sleep. How stupid!

  Is that the reason for this is that microsoft is forcing me to use a MS account for the connection in order to use my machine?

  From another forum, the solution was simple: change the password. Now, he asks a password after disconnection.

• by using a standard user account, when it is run as an administrator, system does not ask for password

  • I created a standard account for one of my children. He installed a program that refused him permission to run. I went to "run as administrator" and should be asked for a username and password to allow him to use the program. Instead he gave me the same error message access denied.
  • I then tried to implement other programs on his desk to run as administrator and they opened, but they ask me password. Why not invite me for a username and passoword?
    
    

  But the my administrator account has a password!

  Log in as administrator, and then set a new non-empty password. Now, repeat the test under your son's account.

• Windows 8 will not ask for password on wake up from sleep

  My Dell laptop since the upgrade to windows 8 Windows 7, when I close my lid does not go to sleep, or when I wake to sleep, it does not ask me for a password, everything has been reset to the default values, but I don't know why it doesn't work. someone please help!

  The solution, as someone else has asked this question also and got the correct answer - see http://answers.microsoft.com/en-us/windows/forum/windows_8-performance/password-after-sleep/8ef46143-300e-41e8-aafb-b61782b67145 . There is a new setting of Windows 8 on top normal settings in the power settings.

  Be aware that setting how long time should pass before asking to specify a password is required is a per-user setting, so if you need to change the default value of 15 minutes, it takes to each user created on the system.

  For me, I took me 1 minute rather than always for all users, as it is pleasant, if after an accidental sleep, a user can always resume immediately. But the foregoing I have a password.

• HP Pavilion 15-n013ca: HP Pavilion - system will not ask for a user connection

  Had a virus - malware.  load malwarebytes and cleared.  I was able to reboot and log in.  I had too many running - Kaspersky, Mcafee and Windows virus protection systems.  Kaspersky has expired, then started the uninstall, frozen system.  I had to do a hard reboot.  I am now in a situation where when I start the laptop, the system receives the background color shows the date and time, but ask not my user name and password.  I can't connect to the laptop at all.

  I don't have a set of boot disks to this system.  I bought with windows 7, improved a couple of years of Windows 8 and never got to create a bootable cd.  What are my options?  I don't know if it's the windows registry which is damaged or not.

  Any help would be greatly appreciated!

  Hello

  As you started to uninstall Kaspersky, the system should created a restore point, if you can try to restore it as follows.

  Stop of the laptop and leave it like that for 10 seconds.

  Tap here to f11 as soon as you press the power button until you see a message "Windows is loading.

  On the next screen, select your Keyboard Layout and on the next screen, select Troubleshooting.

  Select 'Advanced Options', and then select System Restore.

  Click on yourcurrent system O and then wait as the system restore window opens.

  Choose the restore point created before you uninstall Kaspersky and then proceed to the system restore.

  Kind regards

  DP - K

• UAC is not inviting for some things from windows updates

  Hello, I noticed something strange since the windows updates this week. Some applications that require UAC elevation before no longer seem to make - games as games, Battlefield 2, etc. UAC is still ongoing enforcement and not disabled, as for example if I try precisely to run a program as an administrator, it appears, and some programs continue also to the prompt about opening like Malwarebytes Anti-Malware and all that the brackets in file systems without going through a dedicated service running for him, it just feels as if UAC has been 'relaxed' or at least updated with a list of programs is not to trigger for.

  I know that there is an update for the windows 7 UAC a few years ago which facilitated the situations in which the guests would appear, but it's on a Vista system and I don't know if it is problematic. I ran malware scans and they came to own; and this has only started happening (as much, I noticed) the last turns of windows updates, but by reading the articles in the knowledge base for them I'm not sure if one of them would have changed the sensitivity of UAC on Vista guests.

  Could someone tell if it is a consequence of any updates? Thank you.

  Hello

  I suggest you to check the following link, which talks a lot about UAC.

  http://TechNet.Microsoft.com/en-us/library/cc709691 (v = WS.10) .aspx

• Restore will not ask for ALL my backup set.

  Had to replace a failing hard drive.  The whole process of installation and update of all my software went seamlessly.  Restore my PERSONAL files, however, has been a nightmare.

  I have a set of 3 backup disks (each successive), but has asked only the FIRST restore disc and then (VERY briefly) used the other.

  Unfortunately, not all the files that he handed in my hard drive are the latest versions, and some of my files are still missing.

  QUESTION: How can I force restore to call for ALL 3 of the consecutive backup drives before he leaves?

  I've been at this for hours, and I got it about.   GRRRR.

  Hello

  1. the restore process hang or fail?
  2. do you get an error message?

  We cannot force all disks to restore both. The backup and restore only will guide you to complete the restore process.
   
  For more information on "back up and restore: frequently asked questions" visit this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Could not ask for the keys to Blackberry

  Code Signing page, couldn't ask the Blackberry keys order form because its automatically disconnect when I clicked on the option forBlackberry 10.1 above. I tried already several times.

  Please advise kindly. Thank you.

  I didn't belive unit updated their SDK for BlackBerry ID support chips.  You can use the link on the form of signature for BlackBerry 10.1 below, allowing you to ask the SJC of files that you can use to sign with the unit.  We have not a tutorial on our site for the signature in the unit.  Best to check their documentation for these steps.

  But if you can produce an unsigned release BAR since the SDK of the unit, you can still use our tools to sign using the following command:

  BlackBerry-sign - storepass

• Windows 7 does not ask for password when password protected sharing is on.

  Hi guys,.

  I'm no stranger to permissions etc as I work in it, but it confused me after 4 hours of messing around.

  I'm trying to make sure that when I share a file on my home network that windows requires a password in order to access what it is not doing.

  The following conditions are true for both machines:

  Are windows 7 Home premium

  Have file sharing enabled on each respective network adapter

  Are members of the home network

  Are both on the network, called "WORKING group".

  Assistant file sharing was turned on and off then to make sure it wasn't an influence, it is currently off as he auto-actions the user root folder.

  Network discovery is on

  File sharing and printer is on

  I tried the two combinations of sharing folders public or not, but is currently disabled.

  Streaming media is off

  Password protected sharing is on

  Tried the two combinations of user accounts and passwords to connect to other computers. (This is currently set to allow windows to manage)

  So I won't list them the public parameters are not relevant.

  I put one hand on my laptop remove 'Everyone' and 'administrators' only have my own authorized account which is be an administrator.

  My other machine but I still seem to be able to open and access the folder. I tried to change advanced sharing permissions and security settings to exclude any group that can be let my other pc on the network but so far still no prompt for password.

  I even went to regedit and apply the following on both machines:

  1. Open Registry Editor (Start search - regedit)
  2. navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
  3. create a new DWORD value with the following properties: NAME: LmCompatibilityLevel
  VALUE: 1
  4 reboot your PC and try again to establish the connection.

  Can anyone help?

  Thank you people!

  I think I've cracked the question:

  I created a new account admin on my PC and the first time I tried to access anything, I got the password. I don't have it a second time.

  I then removed and put in the passwords and then disconnected cache and back in and asked again the password.

  I tried the same thing on my other account, but it has not yet requested.

  It turns out that even on another computer, if you have the same username and password that it automatically authorizes for good once you enter the network password first.

• BlackBerry Desktop Manager 5.0 Smartphones does not ask for new OS

  I downloaded the latest OS for my BlackBerry Curve 8330 m and removed the SELLER. XML file. I also backed up all my data and applications. In accordance with the instructions on CrackBerry, when I plug my Berry and start DM, it is supposed to invite me to install the new OS, or if it does not "click App Loader and whatnot here."

  He don't ask me twice. How to actually install the new OS?

  Thank you!

  If it does not prompt you, you can begin the process by going to the Application Loader icon. This will start the same wizard to guide you through the process of loading.