UAC prompt

Similar Questions

• Why my network connection properties do not show more UAC prompt?

  I can't put my connection properties more. In network & sharing center when I rightclick > properties on the connection interface, it shows no UAC prompt. I have disable Netbios over Tcp/ip, but every time that I connect it changes to default (enable netbios..). I'm the only Admin with 2 profiles on my personal laptop without connection (wired / wireless, office, etc.) of local network either. Earlier, the same connection worked fine with the settings 'disable netbios. I tried to create the new connection (same ISP, USB 3 G dongle), reinstalled the drivers of network cards, deleted the old connections, but the problem persists. I can't set my connection properties!

  I noticed most of my local network/Services have a profile not attached with long unknown password. New connections I make in a user profile does not show in my another user profile, it wasn't like that before. I want to know the default TCP/IP registry, in particular Linkage, Bind, export etc if this may be the reason. (Values in HKLM/System/CurrentControlSet/Services/Tcpip/liaison & Interfaces examples / by default). Of course the values may differ in each machine, but I want to have an idea.
  Finally, I would like to see some improvements in security in the next editions of windows. UAC never warn you when some outsider load .reg hives or changes to the settings, it annoys only his own user/admin. Our firewall is open for the subnet Local in the discovery rule of the network for the network private by default, assuming that we are all connected to the cable network of offices. There is also two versions of the firewall for home users specific & businesses users. It is impossible to uninstall a Service it it gets corrupted or protect the process svchost.exe/legit if someone hacks. Coz anti-virus software fails to catch the thieves hidden legitimate process. UPnP, printer ports, of the discovery of the network are all known loopholes in windows firewall forget remote things. If someone makes an unknown connection to my PC something must warn me at least. With fast connections to today I don't think that any Messenger needs firewall exceptions. It is unclear what programs/services the firewall knows & blocks ("all programs/services that meet the criteria"), it should be editable to all net database using software/services, which can be exploited by the bad guys. I don't see any logic in the purchase of an operating system, then buy a firewall too, it should meet. Also a protection tool for our vulnerable register which is originally from the success of a rival to round shape & red/green color used to make a pie & a big city is named after it. :-)
  Thank you! -Manish. 17/10/12
     
  Hi, Maria Teresa K,.
  Thanks for the reply with some good suggestions & I love your header "Refreshing Office & opening word doc", operations, sometimes even what is more difficult and more complex are easier in windows.
  -Very well, it was related to administrative privileges removed by a hacker or my ISP. As I've seen Undocked profiles with long password in most Network Services & Local such as RPC, BFE.
  I wasn't starting in safe mode with networking (press F8 at startup), then then ran mode Directory Services repair as well. Finally called my ISP was no Sim Card of my 3G dongle. is CHANGED!
  Then as a last solution, I have my Dialer app right click & he ran as administrator. This time I could see UAC prompt while clicking network map & could set the connection properties.
  You were right about my two profiles being Admin & it took place in both, so they used netuser thing (that infamous Director of integrated hidden a/c. which is not known by the users but is well exploited by hackers). I saw this profile sunflower photo in my profile %-appdata-temp folder, I use different images for my two profiles. Also, someone wrote to Parvdm port I checked later, I don't have any printer at all, so this hack port printer & file and printer sharing is the culprit. Anyway now it seems fine, only this soft dialer privilege token is set, then run it as administrator, it's funny that I am the admin.
  Yes, I ran several system restores but this intrusion is older that my restore point limit, yet once no way to keep/save our best Point restaurant forever. Not sure/easy way to fix a corrupted user profile, to copy all in a new, most of the software refused to work, a lot of customization needs to be redone. This change of name ntuser.dat is too scary, what happens if I can not log on later, I had a nightmare with LogonUI.exe when I applied a 3rd party desktop theme shit earlier, I had to reinstall windows. So start, logging on things that I dread, all must keep a portable external drive with windows & its profiles.
  Now, I read & know using Standard user instead of administrator has a/c. for browsing the net, but this theory does not work in practice so many apps to keep updated/re-installing 5.0.6.1 versions each week, and many apps produce UAC guests. Half my time wasting on typing Admin password in the profile Standard exposed, much easier for keyloggers to record it & then secondary logon also runs with remote registry, management of firewall remotely etc. OK, they are not checked in my Public network, but they are in the list of the firewall exceptions for can not show WARNING!
  My current problem is solved, but I insist on these few things to develop;
  (a) a separate tool for the Protection of the independent record.
  (b) with HKLM and HKCU a separate HKLW & HKCW for Windows registry keys that is Unchangeable no matter what. To do this, future apps should be as portable as possible.
  (c) more intelligent firewall multimode, antivirus, recovery tools built in, checked the IP range for windows updates/upgrade. Services and process manager.
  (d) the names of files dynamic with static virtual names for the same. Password for any whole folder/usb/removable/external drive.
  (e) all the hidden info, exposed in detail to the owners of the OS, not for some professionals, don't worry not bad know all this, so why hide from users. for example, I don't like the unknown password in BFE service responsible for firewall, if it is managed by others, then what am I doing here! In order to better help files offline if you please.
  (f) all stay is discussed by experts revered worldwide.
  Thank you! -Manish. 21/10/12

• How to hide the accounts on the Welcome screen, but not on UAC prompt

  Running Vista Ultimate

  I created several standard users and multiple administrative accounts of the different members of the family to use.  I want them all to use their standard user account when connecting, but when UAC prompts elevated privileges, I want whether they are able to choose their administrative account.

  How can I hide the account on the Welcome screen, but allow it to be used in the UAC prompt?

  I found how to hide using the hklm\software\microsoft\windowsnt\currentversion\winlogon\specialaccounts\..., reg key but he's hiding of uac as well.

  Hello

  It's not exactly what you were asking that you however maybe it will get enough to do what you need to close.

  You should always let a no hidden Admin account and I would leave two, one that is total unused
  except for testing and other fastening. Also be sure to check the 'related links' on these pages.

  How to hide or show a Vista user account
  http://www.Vistax64.com/tutorials/94805-user-account-hide.html

  This one is mainly for reference.

  How to turn User Account Control (UAC) on or off in Vista
  http://www.Vistax64.com/tutorials/48893-user-account-control-UAC.html
  ------------------------------------

  You need to know about this too but DO NOT USE it regularly because if it corrupts, you can become
  Grill quickly.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Please check with what and how you ended up doing.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• The UAC prompt does not accept the password.

  Whenever I have do try to perform an operation and the UAC prompt appears and says 'to continue, type an administrator password and click Yes.' and the yes button is locked. There is no box to type the password. just by typing the password admin does nothing. Passwords work to connect.

  so after hours pulling my hair out and I was wondering why... it gives me access, I noticed that my account password protected which is suppose to be the admin account is a standard user account... or at least it is now... so now I have standard user accounts and no account Admin and everythings not locked with no way to change it... help

• How would a UAC prompt enter information identification of the administrator on the programs and the elements of the control panel of my choice? [Windows 7 Ultimate]

  I'm working on setting up a guest account on a Windows 7 PC I have. I was fiddling around in local security and group policy strategy to try to make an account secure, but limited on this PC. I understood how to fill most of the policies I want to apply to this account, but have not been able to find one for policy, as I said in the title. I want to make is that if a program or a component of the Panel tries to be executed, I wish a UAC popup prompt. However, I wouldn't that happen with all the programs and items in Control Panel, only some of them. I found how to block programs and settings panel of current or well configured, but I want some of them to run on the base if admin credentials are entered. Any help is greatly appreciated!

  Not really - they would not be able to get there. For most of the policies, your policy will be either hide the option completely (they'd never see even the ability to click on at all), or he would tell them he was disabled by policy and their only option is to click on 'OK '.  This is because UAC is not designed as a way to temporarily lift a policy - it is designed as a way to prevent a user (or more exactly, a running program using the security context of the user) to escape from their Bishop model and causing changes to files or registry keys that are not directly for them (their own key to personal registry or a file folder).

• How do I see what changes, UAC prompts all?

  When I run shareware or a program downloaded recently, I worry about what "changes" or UAC is prompting action.

  For example: Pixeur selector of color (http://www.veign.com/application.php?appid=107)
  I don't expect really a pipette to give me the UAC guests - but it does. However when I look at the UAC dialog for more details, he said only program location - no details about what is tyring to do.
  Given that the 'changes' or 'actions' of the program are what UAC alert me, I am concerned and want to know EXACTLY WHAT CHANGES or ACTIONS the program is trying to do, so I can confirm their.
  The UAC dialog box does not appear to be any information whatsoever?  I have to guess blindly, without knowing / being able to choose what I agree to?
  It's like a legal contract I don't get see first?
  ?????????????????????????????
  Why hell Microsoft choose to scare & alarm me, like that, without giving me any visibility or details - so I can make an informed choice.
  Sigh.
  I paid money for Windows 7, I thought that the days of Vista garbage exceeded & I finally have a decent OS.

  I paid money for Windows 7, I thought that the days of Vista garbage exceeded & I finally have a decent OS.

  We will calm down a bit and consider this:

  • UAC is designed to prevent programs that are not allowed to do risky things behind your back.
  • Attempts to create or modify files in the files system is considered to be risky.
  • It is also risky to attempt to change the registry.
  It's as simple as that. If the color of pixeur selector keeps generating warnings of the UAC, then you have three options:
  -To obtain a compatible version of Windows 7.
  -Check the FAQ to know how to bypass the problem.
  -Disable the UAC (not recommended).

• Windows 7 Home Basic is not install Auntie photon more modem because of UAC prompts

  I have a big problem since the last 2 days and not yet resolved, my computer laptop windows 7 Home Basic is not install Auntie photon more modem, when I try to install setup.exe, error appear UAC message "do you want to allow the program following an unknown Publisher to make changes to your computer?   If Yes to insert the password admin, but I have no admin password, I only have user password to run pc and it does not support the installation, I got this laptop in grants gov., and it's a built in password protected, admin I try resetting put uac also asking admin password , so I can not able to make a change with the UAC or install the software, now what I do to install the software of my choice, pls help.

  concerning

  Yuvraj singh

  Original title: WINDOWS

  I have a big problem since the last 2 days and not yet resolved, my computer laptop windows 7 Home Basic is not install Auntie photon more modem, when I try to install setup.exe, error appear UAC message "do you want to allow the program following an unknown Publisher to make changes to your computer?   If Yes to insert the password admin, but I have no admin password, I only have user password to run pc and it does not support the installation, I got this laptop in grants gov., and it's a built in password protected, admin I try resetting put uac also asking admin password , so I can not able to make a change with the UAC or install the software, now what I do to install the software of my choice, pls help.

  You need the admin password.  Contact the admin.

• Want to Turn off UAC prompt when you try to run a program.

  Original title: shortcut Windows 7 running a program that will start / stop services.

  I use a shortcut in windows 7 to run a program that start / stop services.  He always asks me permission to run this program and I always want to run.  But it's the only shortcut that I encouraged it from.  Is there a way to flag / allows this action?

  Hi ctcp-ga,.

  You can try to change levels of notification and check if you get any user account control prompt.

  Enable or disable the User Account Control

  http://Windows.Microsoft.com/en-us/Windows7/turn-user-account-control-on-or-off

  How can I change the behavior of user account control by using the slider?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-the-behavior-of-user-account-control-by-using-the-slider

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• UAC prompted on the login screen

  Hi all

  I've seen several posts on the user invited on the login screen. There are also several suggestions how to get rid of the account, so far I had no chance to delete the account of user invited to my login screen.

  I bought a brand new MBP and migrated all of my old Mac Mini to the new MBP. The guest user account was NOT visible on the Mac Mini.

  Here's what I've tried so far:

  • Checked 'Find my Mac' is NOT enabled
  • Guest user account is set to 'Off' under users and groups
  • A ran a script that I found in an older post in the Terminal

  None of the things above removed the user invited to my login screen.

  It's all solid fix how to get rid of the guest user?

  Thank you!!

  You said "guest user account is set to off in users and groups.

  Do you mean that the guest user account is always accessible in the ordinary journal?

  Also-

  When you are in users and groups - you by clicking on the lock - and enter your password to make changes?

  If so - you should be able to simply remove the account of guys using the sign minus (-) sign at the bottom of the box

• Unable to paste the password at prompt (run as administrator) UAC of notebook

  Hi all

  I can't copy and paste text from Notepad into the password field to the UAC prompt when we try to run or install any application by using the run as option administrator, on some machines in the domain. The strange thing is that the other machines in the domain do not have this problem. I checked the setting of the UAC on both machines and they are the same. I also made sure that GPO settings under "computer configuration > windows settings > security settings > local policies > options' security are the same."

  Pourrait - what it has to do anything with MIC (message integrity check) and UIPI (user interface privilege isolation)?

  I am trying to solve this with procmon and procexp but totally lost.

  In the hope of a response.

  Kind regards

  Haze

  Are all computers, the good & the bad guys, the correctly entered the Secure Desktop mode i.e. are their wallpaper gradation & obfuscation and nothing else than the Office secure allowing ['IU of altitude ','Credential UI '] to interact with [i.e., all computers, the UAC settings are to another always notify or default levels]?

• Problems with UAC, Sims 3 downloader and original windows

  Problems with UAC, Sims 3 downloader and original windows

  I have windows Vista and have been using it for a while to play the sims 3 and download games via original EA downloader/store.  I had run a windows update and an original updated in the last days and therefore my sims 3 expansion packs ceased to operate.  I uninstalled all and have reinstalled the original game of the downloader of origin and now when I try to download my expansion packs I get an error message saying that windows has prevented the application creates a download directory, please accept the UAC prompt to start to download this game.  I approved the promt and they have same message came still high and so I disabled UAC altogether and still got the same error message, I looked on the EA forums and the only line I can find of them our it may be a windows problem (which I doubt)?  Can you help me?

  Hello

  Method 1:
  Right click on all of the files and select run as administrator and try to install it.

  Method 2:

  You can try creating a new user account.
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Note: select the Administration option while creating a user account

  Method 3:

  You try to run the system restore at the same time that it worked very well.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  I hope this helps. Get back to us with results

• UAC Trust shortcut 1.0 = > Autostart

  A few weeks ago their was no avoid Windows 7 when I had to buy some laptops and PCs for friends. Not wanting to disable UAC, I started imidiately looking for a program for launching some existing programs without the hated UAC prompt.

  Eventally, I found UAC Trust shortcut 1.0. It lets you make shortcuts (like a white list), which grow more.
  The only downside is that you need to start the UAC Trust shortcut-service manually, each time the computer is restarted.

  Anybody know a way how to automatically restart this service?

  TIA, Jem.

  P.s. I've tried the way Planning task on the tracer.exe found in the installation folder, but nothing helped.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• User Account Control (UAC) in Windows Vista

  Dear Sir/Madam,

  I'm really happy of the UAC feature and also a big fan of Windows Vista. I had a few questions about UAC.

  (1) while UAC prompt appears, I've heard that it stops all processes of the system, but my Windows Media Player stops playing music even when the UAC box. Is there a problem with the security settings? UAC is currently working?

  (2) does not block the virus UAC to make changes to the computer, even when you run an administrator profile? Is it possible that the virus can secretly infect system files when you run the Administrator profile?

  Thanking you in advance,

  Kind regards

  Rannvijay

  Rannvijay Kapoor

  (1) while UAC prompt appears, I've heard that it stops all processes of the system, but my Windows Media Player stops playing music even when the UAC box. Is there a problem with the security settings? UAC is currently working?

  (2) does not block the virus UAC to make changes to the computer, even when you run an administrator profile? Is it possible that the virus can secretly infect system files when you run the Administrator profile?

  From my experience with UAC, it prevents new processes start

  UAC blocks only 2/3 of the virus, so it is possible that he let a virus on your system.

• Vistas UAC won't let me install programs

  So, I'm going to install Sony Vegas Pro 9 and used UAC prompt comes back, but this time, instead of having just my username regular, with a blank password field, the two fields are empty, and the picture is blank.  Challenging fingerprints hangs my computer, even if the Fingerprint Logon works very well.  And when I put in my domain and name (for example: domain\user.name) and my password, it will wait 10 seconds and then freezes.  Although recording on with my password and the name works without problem.  Can someone help me?  And I tried to turn off UAC, then a command prompt comes up, so I can't do it.

  Hello ReillyHowe,

  Thanks for posting on the Microsoft answers Forum.

  You problem is related to a problem domain opening as would be better suited in a different Microsoft Community.
  Please follow the link and post your question there.

  http://TechNet.Microsoft.com/en-us/Windows/default.aspx

  Sincerely,
  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• stupid question about UAC

  OK, it's a REALLY stupid question about UAC.

  I have several icons on my desktop. Some of them are games that must be run as administrator in XP compatibility mode.

  I rarely accidentally tried to open the icon, particularly if you use the keyboard to choose what I want.

  Is there a reason if I accidentally open a game that pushes me in height DO NOT hit 'Cancel' if I didn't intend to play the game at the moment, but trying to open something else? Something like a process being left in suspense, memory leaks, or any other reason why I can't Abort to launch the application to the UAC prompt?

  Hey, Slick,

  Clicking Cancel will prevent the running total process if you do not have to worry about the still ongoing services for memory leaks or game, etc..
  I hope this helps.