Ubuntu CD does not start in vmware

Similar Questions

• PlayBook Simulator does not start in vmware.

  I had just installed sdk playbook and Simulator on windows 7 and configure the Simulator on vmware.

  But the playbook Simulator does not start on vmware... He simply display the splash screen...

  Do you have another computer to try out it?

  For example, in my case, I have 3 PC. Two of them the Simulator installed and worked well, the third, no matter what I do I can't get the Simulator to go beyond the start screen.

  I even took a suspended version of the Simulator everywhere for my 3rd machine, and it has run for a little while so locked up when I tried to activate the mode of development. However, VMWare works perfectly for other sims installed on this machine (but with VMTools installed in the virtual machine), then it is not a VMWare question by itself.

  Personally, I think that unfortunately for certain combinations of hardware/OS simulator simply does not work.

  FWIW my 3rd machine is underpowered with only 2 GB of ram, an Intel ATOM (z520) processor and a GMA 500 GPU which are pushed along Windows 7.

  HTH - Rufus

• Satellite U200-179 often does not start after the installation of Ubuntu Live CD

  I'm installing Ubuntu edgy on my new computer toshiba laptop U200-179.
  I install linux without problems from the live CD, but when I try to restart the pc, often it does not start.

  During booting linux runs the utility to check the file system, although it seems that everything is ok and the boot stops.

  I also tried a different distribution (Knoppix 5.01), but with this one, the installation process stops at the beginning.

  What could be the problem?
  Luca

  You have upgraded to the latest version of the BIOS available (3.30)? The previous (2.40) had problems with some Linux distributions...

• the inventory of VMware service does not start, the wrong function, bad sql server port

  I've migrated vcenter SQL database to a new server after this KB

  https://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 7960893

  but now most of the vcenter services does not start cause of according to the inventory service.  I see service log of inventory which is the problem, it tries to connect to SQL Server by default, 1433 port, but my SQL server instance is listening on a different fixed port, I don't want to change.  Where can I configure the inventory service we another port of SQL Server?  According to a KB related to the above, it is possible to do

  https://KB.VMware.com/selfservice/search.do?cmd=displayKC & docType = kc & docTypeID = DT_KB_1_1 & externalId = 2033516

  but unfortunately I have vcenter 6 and the instructions above do not seem to apply, I can't even find ssocli, the mentioned folder structure does not exist on my installation

  
  Thank you.

  I solved this.  Despite what has been reported in the newspaper the issue was not the port.  The new database is a named instance, the connection string for vcdb.properties, he entered as the server name = hostname\instancename in fact, it is necessary to use two slashes return hostname\\instancename :-/

• VMWare Virtual Center Server does not start after Windows Update

  Help!  I'm under vCenter 5.1 on Windows 2008 R2 with SQL Server 2008 R2 Standard.  I have applied the latest updates for Windows (critical only) as it applied Service Pack 3 to SQL 2008 R2.

  Now the vCenter Service does not start.  It generates error 7024 in the Windows system log:

  The VMware VirtualCenter Server service stopped with the error special service that the system cannot find the specified file...

  and error 1000 in the Windows application log:

  Could not initialize the VMware VirtualCenter. Closing...

  PS - I confirmed that the SQL instance is running.

  Absolutely nothing has been done except the Windows and SQL updates.  Everything worked fine until this point.  Ko an article deals with a "space" condition, but there are a lot of available space.

  I have attached the file vpxd.log, he created.

  Clues?

  Thank you.

  OK it turns out that the WWW service is interfering with vCenter Service on Port 80.  The thing is that the WWW service has been set to manual start.  Somehow during the upgrade Windows or SQL, one of them decided to turn auto-start. After the reboot, the conflict occurred.  Once I put the WWW back service to manual start the vCenter service started OK.

• VMware Workstation 10 bug: DVD SATA drive does not start if we disable the floppy drive in the VMware BIOS

  Hello

  I use VMware Workstation 10, and I found a bug:

  With the all-new virtual machine (for example with Windows 8 x 64), if I choose a hard SATA and SATA DVD drive in VMware and I have to disable the floppy drive in the VMware BIOS, Windows 8 (or Windows 7) ISO does not start.

  If I come back in the BIOS to enable the floppy drive once again, my ISO boot.

  If I use the DVD IDE drive in VMware options, no problem if I disable the floppy drive.

  With "EFI mode", no bugs.

  Please, can you solve this problem? Thank you

  Hi freebeing,

  Thank you for reporting this issue.  We have reproduced it is internal and work on it.  Sorry for the inconvenience.

  See you soon,.

  --

  Darius

• VMware does not start - guest xp 32 bit SP3

  Running vmware guest 32-bit xp SP3 will not start not host is mac os x 10.6.4

  See zip files in next post according to Woody comments

  You still have not edited your original post and removed the copy and pasted the contents of the log file...

  Well I can start a Virtual Machine Window XP with your configuration so .vmx file at least, good sound, however, you will need to provide adequate information to help diagnose your problem and while the vmware.log file may be useful is not always tell the whole story, so take a look at HOWTO: ask (and answer) Questions as a guideline , then provide additional details and then just "vmware does not start - guest xp 32 bit SP3.

  Remember to change the message original and deleted the copy and paste the contents of the log file.

  (Just in case...) On the right side upwards under Actions click on Edit thread.)

• VMware.exe does not start

  Not sure when it happened,

  X 86 Win7 64, vmware 5 I think (vmware.exe is 14/08/2009-21:20)

  When I run vmware.exe (cmd line, nothing happens, no error, no messages.) He worked a few days ago. I can have installed a new drive, maybe asking a couple.

  Another app are ok, none of the exe under vmware seem to run. I tried to fix it, no luck.

  Google search (vmware.exe does not start), nothing obvious

  You don't know how to debug... y at - it track I can run?

  did you check your antivirus and firewall software?

  you have a process named webcam.exe or fixwebcam.exe running?

  ___________________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Update Mac OS, now VMWare Fusion does not start

  I upgraded to Mac OS 10.4.11 on Intel MacBook Pro and now VMWare Fusion does not start.  I've since installed, uninstalled, and reinstalled to Fusion 2.0.2.  That did not help

  I have attached the logs from VMWare. Any suggestions?

  John

  Hi John,.

  I checked your logs - thank you for them!  That you use in an accident in one of the Apple libraries (OpenSSL, to be precise), which uses VMware Fusion.

  I see a number of Mac OS X 10.4.11 users complain about the accident even in iTunes:

  http://discussions.Apple.com/thread.jspa?MessageID=8254606

  http://forums.Macworld.com/thread/105826

  They claim that the installation of the latest Apple security updates (they specifically mention 2008-007) solves the problem.

  Can you try to install the latest security updates, and let us know if this fixes the bug Apple?

  Thank you!

  Ben

• Fire fox does not start since 3.6.6 moving secmod.db helps not Ubuntu 10.04

  After the upgrade to 3.6.6 I was able to get firefox to start. I can not start with a new profile (firefox - p) cannot start if I remove my profile. No errors are reported that it does not start.

  This has happened

  Each time Firefox opened

  == upgrade to 3.6.6

  Fire Fox does not at all, even if it is in my process, as if his walk, I tried to uninstall and re install it... no chance. I also tried to uninstall and revert to the version previous and who does not work either

• Satellite P840/016 does not start a CD or DVD

  F2 using activated BIOS to boot from the optical drive, backed up and restarted. Find the CD created bootable from the same laptop computer using the recovery of Windows 7 repair disc but will not start.

  Tried the Ubuntu DVD that works like on all other laptops boot disk - still does not start.

  Changed the setting in the BIOS for non-secure - same problem.

  When you start your laptop press F12 to get into the boot menu. Place the bootable disc into the optical disc drive. Choose the CD/DVD device from the list in the menu and press ENTER.

  It work?

• Portege R100 - does not start from CD player

  I have Toshiba Portege R100. I want to format and start all over again

  I use killdisk, excellent utility program, normally takes place the disc cd but the machine does not start from cd player, even when it is said in the bios, it says 'error of cable' & drive still works fine when the system is installed & running

  I want to remove unbuntu & just xp, thought that I would start plus-plus easy or simply to remove unbuntu?
  If remove unbuntu, how can I do this?

  Best regards, TIM

  Hey Buddy,

  If you want to have XP only, try to boot from a XP disc. You can format the drive HARD whole with XP disc that even Ubuntu is installed. I put t understand why you use another program to format the HARD drive

  Then boot from a XP disc and follow the instructions on the screen. If it doesn't work, it seems to be the material of your player to malfunction.

• Windows XP restarts all the time; does not start mode safe mode and last known Configuration does not work either

  Hello! Recently, I installed Wubiand appreciates well. However, a few days ago, when I tried to boot XP on my netbook (EEE PC 1005hab), it restarts just constantly return to the selection screen of the BONES. I tried Safe Mode and last good Configuration known with anything will do. What should I do now? Ubuntu has not stopped working suddenly, so I can't access my data.

  I don't have to have a Windows XP CD, there is something weird Asus recovery instead. In addition, it is a netbook so I don't have an optical drive to run the recovery CD. I'm doing a Livecd of Linux USB so I can back up my data... but I can do but reinstall at this point?

  Thank you.

  The afflicted system has a working CD/DVD drive (even an external).

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu, it has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start pressing the F8 key with more urgency (earlier and more frequently) until you see disable automatic restarts on system failure, and then select it.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Windows XP does not start, no hard drive error

  I have windows XP installed on my hard drive of 160 GB WD Scorpio Blue PATA on a DELL Latitude D600. One day, I wake up and my laptop does not start. My computer starts up, leaves POST, but the hard drive does not start. He's right there. I try pressing the buttons but it starts a sound signal, so I have to turn it off. Normally, if there is no device that my computer can boot from it displays something along the lines, "no main boot device found. Press F1 to retry boot or F2 to enter the configuration utility. "but the screen does not show anything.
  I ran chkdisk and a number of other diagnostic tools on the hard drive, but nothing helped. I have Ubuntu on a USB key and with him, I can access the files on the hard drive - all files are intact, and I can read/write without problems. It just does not start.
  How would I go about fixing this? Any help is appreciated. It is the third hard drive that has failed inside my D600 (my second WD). I've had enough of this!

  Try to use the last good known Configuration:

  http://support.Microsoft.com/kb/307852

  and see if that clears things up to the top.

  Hope this helps

  Post back if necessary

  ____________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• DHCP server does not start - the storage control block address is invalid.

  I use a trial version of the Pro Workstation 12.1.1 on Windows 10. I seem to have a strange problem where the DHCP service does not start.

  I tried to go into the virtual network editor and then restore the default settings, which had no effect.

  The event viewer displays the following text:

  CreateFile Version ioctl(): VMnet8 (327680 393216): the operation completed successfully.

  / The storage control block address is invalid

  Checked the service and it runs under a local, verified system account permissions on the config dhcp / rental file in c:\programdata\vmware\ and both have system configured to full control. I tried to run the vmnetdhcp.exe in a command prompt to we hope to get additional information, but cannot be executed directly. I can't figure out how to get out of documented logging dhcp server in order to track down what could be the culprit.

  I tried to uninstall workstation, restart, reinstall, restart both unsuccessfully. I had version 9 workstation that was installed previously, in which the trial upgrade.

  Any suggestion would be appreciated.

  Figured it out.

  It appears during the workstation installation 9, he placed vmnetdhcp and vmnetnat in c:\windows\syswow64 folder. Pro 12 workstation puts these files in the default directory (C:\Program Files (x 86) \VMware\VMware workstation). The service was always pointing to the old location even SysWow64 after an uninstall and reinstall.

  I replaced the files SysWow64 folder workstation and services started right up.

  Checked the work by selecting NAT and gets an IP address from the host machine.