UCS and VMWare-VNIC-VMNIC active-active/active-standby

Similar Questions

• ASA (Active standby) site-to-Site VPN Question

  Hello

  I had the question as below

  Site A - 1 unit of VPN Netscreen firewall

  Site B - 2 units of ASA VPN firewall

  

  I'm trying to set up a VPN from Site to Site, but a problem with the configuration of the active standby.

  Initially, I tried Site A 1 unit Netscreen and Site B 1 unit ASA vpn site-to-site. There's no problem.

  but joins another ASA at site B and configure it as active / standby then I saw a few questions that I need help from here

  Things that confuse me.

  (1) do I need to use 2 public IP address on the SAA? (public IP for assets and the other a public IP ensures IP. it seems like a waste of the public IP address.)

  (2) link failover and dynamic failover can be configured on the same interface?

  Please help in this case, configuring VPN from Site to Site with active configuration / standby.

  just to add to this,

  just be careful when you dedicate an interface for dynamic failover, make sure that it is the highest capacity, or at least the same ability as an interface offers th

  so if you use concert for passing traffic interface uses a concert for dynamic failover port, several times we saw people using the management for steful interface when they ports of concert and they run into issues where the dynamic function does not work as expected

  You can read more here

  https://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/failover.html#wp1051759

• Satellite 3000-214: after CPU upgrade no screen and no HARD disk activity

  Hey all,.
  I have a 3000-214 Satellite that comes originally with a PIII-M 933 Mhz. (SL5CG)
  http://videoff7.free.fr/sl5cg.jpg

  I ordered on eBay a second hand replacement (1133 Mhz) CPU SL5CK. (same number of pins, the same processor family: RH80530)
  When I go in, the laptop starts, but there is nothing on the screen and no HARD disk activity.

  So I asked the seller if he had tested the CPU, it sent, he said no and sent me 2 CPUs of replacement, another SL5CG and a SL64Z (which does not appear on the Intel site for some strange reason, but which is of the same characteristics as the SL5CG..)
  http://videoff7.free.fr/sl5ck.jpg
  http://videoff7.free.fr/sl64z.jpg

  The two processors give the same result with nothing on the screen and no activity of the HARD drive either.
  I checked my BIOS, it is the latest version: 2.30.
  Some laptops in the series 3000 Satellite (e.g. 3000-601), are delivered with a 1133 Mhz CPU (SL5CK) and also share the same bios exactly like my 3000-214. (upgrades to the bios on Toshiba website for my 214 & 601 are the same exact links and MD5 are equal). Also the 3000-601 & 3000-214 share the same chipset: Intel 830MP.
  But for some reason, it does not.

  EC which could I missed?

  It is always possible that all 3 processors that I was sent by the seller are dead, but it would be strange at this point, I think.
  So my question is, anyone have any idea what I might try to work or have experience with the upgrade a Satellite 3000 CPU?

  My warranty is looooong Sub anyway, so if a Toshiba employee could check in the basis of how fast max CPU can be used on the Sat 3000-214, I would be very grateful.

  Thanks a bunch for any info.
  Kind regards

  Alcahest

  Hello

  I studied a bit in the web and it seems that the Satellite 3000 has been bundled with Intel Mobile PIII 800, 850, 900, 1000 MhZ CPU

  I think that this will not work because of the speed of the CPU.
  In addition, I found this Toshiba document:
  http://support.toshiba-tro.de/KB0/FAQ5300W5000XR01.htm

  It is said that it is not possible to replace the processor in a laptop Tosh because processors are connected to the motherboard using a process called TCP tape carrier package.

• I moved a drive and it says my activation key has already been used is anyway I can get it back to keep it active

  I moved a drive and it says my activation key has already been used is anyway I can get it back to keep it active

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question.

  This problem occurs because you changed the hard drive. When a change is made in the hard disk of the windows vista system will ask you to activate.

  To activate Windows Vista by using the automated telephone system, follow these steps:

  a. Click Start, and then click computer.
  b. click System Properties on the toolbar and then click here to activate Windows now in the Windows activation section.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. click Show me other ways to activate.
  d. click on use the automated telephone and then follow the instructions.

  You can also navigate to the link below and try to follow the steps to reactivate the copy of Vista.
  http://support.Microsoft.com/kb/950756

  Reference link:
  What is activation?
  http://Windows.Microsoft.com/en-in/Windows-Vista/what-is-activation

  Activate Windows on this computer
  http://Windows.Microsoft.com/en-in/Windows-Vista/activate-Windows-on-this-computer

  Please respond with the information. I'd be happy to help you further.

• How can I put Windows on a USB key which will be bootable by BootCamp and how transfer the activation code?

  * Original title: Windows 7 - CD to USB

  I bought Windows 7 (the two CD 32 & 64) many years for use on my early 2008 MacBook Pro, with an optical drive, via BootCamp. It worked very well.

  Now I have a new MacBook Pro without optical drive, but would like to install BootCamp and use Windows again.

  How can I put Windows on a USB key which will be bootable by BootCamp and how transfer the activation code?

  Thanks in advance for your help.

  Use Rufus:

  Rufus - create USB bootable the easy way discs

  Another solution:

  http://www.AddictiveTips.com/Windows-tips/create-bootable-Windows-7-USB-flash-drive-from-DVD-disc/

• unloading of feature to make dhcp off the WLC and put it on Active Directory.

  I need to use the feature of unloading to dhcp off the WLC and put it on Active Directory.  Someone at - it a walkthrough or a page for this?  I know it's just a checkbox and a redirect to the new dhcp server, but where the hell is the configuration on the WLC?

  Thank you!

  -anne

  You can go there.

  http://www.Cisco.com/c/en/us/TD/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_01001001.html

  Point to your existing ad integrated DHCP server.

• Control of VCS - H460 and punishment should be active?

  I have control of VCS and highway in production the sanction and h460 are both active on the highway, but inactive on the control.  Is this correct?

  I guess you saw the 'dormant' on a xstatus page https:///h323, right, or it is mentioned

  somewhere else as well?

  Maybe that Andreas might followed a request for improvement, because at least it can be confusing.

  On a VCS - C it appears in red (at least) letters on h323 config page.

  May not show at all on the vcs - c might be useful as well...

  In general h460 is a party which makes the highway a highway.

  If you would like to try for example to access to the

  https:///locallyregisteredendpoints page he would tell you that you do not have a license.

  H460 is a party that makes the fast lane of the motorway.

  So this 'inactive' is nothing you need to worry, this is the desired behavior. And its

  OK h.460 is not used on the SCV - c (this is not a bug it's a feature :-))

  If your firewall allows it and your VCS-E is set up to do this, you can try to register endpoint

  with the VCS E h.460.

  Generally when having strange symptoms its worth checking that there is no NAT help / Application

  bridge layer or what ever between the components involved and firewall ports are correctly

  configured and zone rules and the research of course are configured correctly.

  Read also the notes of publication and eventually upgrading to the latest versions of software.

  The course area has options has two h323 options that I would try to play in such a case:

  Demultiplexing "H.460.19" and "Protocol" mode (must be the same on vcs - c and - e).

  Andreas: What are the use cases of these parameters?

  In any case, his strange with his scrambled.

  J.House: Please note the answers using the star under the messages!

• I installed an oem of windows 7 in two from one office to another laptop but today I update my desktop pc and I can't activated

  I installed an oem of windows 7 in two from one office to another laptop but today I update my desktop pc and I can't activated

  INSTALLATION AND USE RIGHTS.

  a. one copy per computer. You can install one copy of the software on a single computer. This computer is "licensed computer.

  b. a computer license. You can use the software on up to two processors of the computer under license at some point. Except as provided in these license terms, you cannot use the software on any other computer.

  c. number of users. Except as provided in these license terms, only one user may use the software at a time.

  d. other Versions. The software may include several versions, such as 32-bit and 64-bit. You may install and use only one version at a time.

  You will need to purchase an additional license.

• ASA 5520 Active standby and ssl vpn loadbalancing

  I have a pair of Asa 5520 failover active rescue running. Can I use these two machines in a cluster of ssl vpn load balancing?

  N ° when a couple active / standby is part of a cluster of VPN, the rescue unit is still pending - she will not be actively terminate user sessions. Only the active cluster members (and non-failover) will do.

• Notification is not sent to the role, activity of Notification status is "Complete" and result of the activity is "strength".

  Hi all

  I have a custom workflow that works very well and a requirement came to send the notification to a list of users after a certain activity is done. To achieve this,

  (1) I created notification and the attributes that are required,message.

  (2) I am creating a special role and assigning users before you initialize the workflow process, and this role is assigned to a type of role attribute that has been defined as the interpreter of the notification.

  When the workflow starts, the activity of notification is not sent to the role while its status is showing as 'Done' and result of the activity is showing that the 'Force' when the workflow process is completed.

  Note: Creating ad hoc-role and assign to users happen correctly, other notifications are bring sent to the respective recipients. Only the newly introduced notification does not work properly.

  Could you help me with this?

  Hi all

  I have fixed this problem.

  When I made the changes first, I kept the attribute type of the special role as text instead of role and I transferred it in the database using WFLOAD and I was faced with the issue of the notice, then I realized and changed the type of the role attribute and loaded in DB using WFLOAD command This time, only the changes are not stored in the DB and I faced the question again. So I thought that associates other issue and therefore posted in this forum (apologies for that).

  Yet once, I saved directly turns him into DB instead of load using WFLOAD, now it works fine.

  Kind regards

  K. Kumar

• I have an old Photoshop CS3 that was installed on a desktop computer that has crashed and is still not bootable. I now have a new office with 10 windows and I installed it and it works. Activation is dimmed, but I can't save. It is said that there is no i

  I have an old Photoshop CS3 that was installed on a desktop computer that has crashed and is still not bootable. I now have a new office with 10 windows and I installed it and it works. Activation is dimmed, but I can't save. It is said there is no internet connection, which is not correct. What should I do?

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  - or run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)

• I bought the creative cloud to the photographer now, but my photoshop and my lightroom not active. Why? I use my ID, but I do not understand because my software not active automatically.

  I bought the creative cloud to the photographer now, but my photoshop and my lightroom not active. Why? I use my ID, but I do not understand because my software not active automatically.

  In Photoshop under the Help menu click on Sign In if you are not already connected.

• I have Abobe CS2 I bought and legally own. I have an old MacBook Pro who had to have the hard drive replaced. I reinstalled the CS2 software and I can't activated with an authorization code. I need the code to use my order

  I have Abobe CS2 I bought and legally own. I have an old MacBook Pro who had to have the hard drive replaced. I reinstalled the CS2 software and I can't activated with an authorization code. I need the code to use my software. I can't afford a monthly payment with Adobe Cloud. How can I get my software activated so I can use it? Thank you.

  Please follow the steps described in this document - error: "Activation Server unavailable". CS2, Acrobat 7, pass a hearing 3

  Thank you

  Bev

• Hi, how can I start my programs? An old verson of Adobe creative suite 2 premium for universities? I have a new computer and I find the activation code of the can´t. The old computer was rejected. Can you help me?

  Hi, how can I start my programs? An old verson of Adobe creative suite 2 premium for universities? I have a new computer and I find the activation code of the can´t. The old computer was rejected. Can you help me?

  Please check: error: "Activation Server unavailable". CS2, Acrobat 7, pass a hearing 3

• Impossible to click on "define and save as my Active Configuration for this project '"

  Environment: OWB 11.1.0.6 Client running on Windows XP Pro SP3 repository and targets on AIX (IBM UNIX).
  
  I have created a new Configuration under a specific project and I would like to make this configuration by default whenever I have connection and select this project.
  
  There is a checkbox when I click with the right button on the Configuration and select "Open the editor" that says "set and save as my Active Configuration for this project ' but when I select the check box and try clicking on 'OK' there is no response from the popup window and I have to click 'Cancel' to exit the popup."
  
  Any ideas on why this is happening and how to work around?
  
  Thank you very much.
  
  -gary

  Try restarting the Client OWB.

  Try right-clicking on the configuration in the Solution Explorer, then choose "Set Active Configuration".

  See you soon
  If