UCS BIOS advise

Similar Questions

• Update the BIOS advise please

  Hello

  I have a HP Pavilion Elite m9360f 64bits. It is now a little more than three years. I saw that there was a recent update of the BIOS since August 2010 and I would like to know if it would be to my advantage to download and install it. The reason is because of the following: 'The system thermal performance enhances' 'updates fan curve for support processer', there are other things listed also.

  Please advise me please. Thank you.

  Never update a bios unless it's to solve a critical problem that cannot be resolved otherwise. If a bios update fails for any reason, you will have a PC that is not useless and costly to repair.

  If you do not experience any of the following problems, then I say do not do

  • Improving the thermal performance of the system. (You need monitor time processor to determine if you have a heat problem)
  • Fan curve updates for support of the processor. (You don't need this except if you upgrade the processor)
  • Answer to the question with the system seems to hang when restarting if a HP Personal Media Drive is connected.
  • Resolves issue with the system suspended when 7 GB of RAM is installed.
  • Update Diagnostic tools hardware v4880.05.
  .

• Slimline 260-p026: how to start my 260-p026 from a DVD?

  I need to start my new 260-p026 since a DVD disc, so I can try to recover the data backed up from my defunct old PC. When the PC starts, I don't see any messages from the BIOS advising me how can I access the BIOS settings (I assume here that I simply need to change the order of boot... right?)

  Please advise how to do it.

  Hello:

  You must go into the BIOS and enable legacy mode and disable secure boot to boot from a DVD.

  It is a new starting procedure with all the PCs that come with the W8 or newer.

  Please see this guide for information on where to access these settings.

  http://support.HP.com/us-en/document/c03659945/

  I prefer rather than to change the boot order, press the ESC key at the beginning of the HP welcome screen for list options.

  Select the F9 boot options menu, and then select the DVD drive in the list.

• Cisco UCS C240 M3 BIOS Flash Image corrupt

  I have a Cisco UCS C240 M3 server than the bios flash corrupted image.

  I followed the steps to recover the bios but below the image, this machine couldn't find a recovery.cap file...

  I just plugged my USB key and the file recovery.cap in the folder root of the USB.

  also the FAT16 formatted USB and FAT32, but it failed.

  I plugged my USB thumb key USB which is at the center of the server.

  Help, please...

  also, the keyboard and the mouse doesn't work. they couldn't recognize too.

  bios_currup.jpg

  

  Have you had the recovery.cap ISO HUU for the ISO c240 (see screenshot)?

  Make sure the USB is formatted, and only the image of recovery.cap is inside.

• Satellite A500-025 - improvements of the new version of BIOS

  I did an update of the bios on my Satellite A500-025. I had a version 1.2 and 1.5 BIOS update BIOS.

  Anyone know what that improvements and is it advisable to always do a BIOS update when a new one comes out?

  Thank you.

  Hello

  Normally the changelog of the BIOS is placed on the Toshiba laptop, but if you can t find it, unfortunately there is no available changelog.
  By the way: I noticed that the BIOS changelogs are often placed on the Toshiba page we. Maybe you can find it there.

  And this update should be carried out only if it of really necessary. If you n t have any problems, to forget about this update.
  Never touch a running system! ;)

• Satellite L300 - dead after update BIOS!

  Hello!
  I had a problem with Windows XP, so I decided to update the BIOS. After update, I got 3 lines of errors. After the reboot, nothing appears on the scree! I have toke off the power to the battery and the power cable for some time, I had taken only one cable, but still nothing! No beeps, some noise of hard/dvd disc on begging. Can someone advise?

  Thanks in advance!

  Thom

  Hey Buddy,

  It seems that the BIOS is damaged and it must be reflashed to an authorized service provider. This is a delicate procedure so these tools can t be downloaded and are only available for the FSA. On the Toshiba site, you can find a list of all FSA. Simply contact the closest in the country and ask for help. Guys will help you best possible
  However, this forum can help you:
  www.theeldergeek.com/forum/index.php?showtopic=21209

• Update BIOS of 1, 70 - WIN on Satellite Z830-10 t - computer not supported

  Hi all

  I am installing the update of the BIOS 1, 70-WIN of 09/12/12, delivered in a folder called "bios-20120907140253', unsuccessfully zip.

  Whenever I run the .exe file, I get "this computer is not supported" returned in BIOS Toshiba package Ver.4.2.1 window.

  My laptop is PT22LE-00E004EN.
  Software from Toshiba Tempro advised me to install this BIOS update.

  Is that what someone else has this problem, and is there a solution?

  Thank you

  Rob

  In my opinion, you need not update the BIOS, even if the new BIOS has been updated.
  I have a laptop works perfectly with the old BIOS and I don't have day to a newer version, even if the new updated released

  However, I found really interesting thread with a solution:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=66787

  Here's another thread with the same error message:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?threadID=68345
  The solution-> retrieve the laptop initial configuration by using disk HARD recovery and try again.

  PS: do it before this try reinstalling the VAP

• BIOS on Equium A200 problem

  Hy...

  I have a problem with my laptop Equium A200!
  I tried to update my bios, I downloaded the update site and when I run, the computer crashed in response. Let him like that 30 min and still no response. I removed the battery and unplug it from the power source and now it won't start.
  Please someone advise me, how could I solve this problem.
  I know that I can reprogram the bios with an eeprom writer, but I would like to know if there is anything else I can do?

  Thank you mircea

  Hi friend

  West nothing you can do. I guess you still have some warranty left on your machine. Don t waste your time with reprogram an eeprom that is not really accessible with a writer normal eeprom (believe me, I know what I'm talking about). Click [HERE: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871], contact the nearest available service partner in your country and allow them to correct this problem, so won´t you have any other problem with your machine.

  Welcome them

• On a Tecra A2 BIOS password

  I want to install a password that must be entered in order to make changes to the configuration of the bios.

  However, when I try to do the password is required to start the computer - I don't want to.

  Unlike other computers, I am unable to find a setting for the password only effects setup (i.e. BIOS) and not the system (i.e. when his kick to the top)

  The security within the toshiba console option is unable to do so, because it signals that the installation is not available on the computer.

  Could someone advise me please on how to do this.

  Hello

  Quad is right. You can set the supervisor using the Toshiba Console password. If the SUPERVISOR password is set, the operating system can start but there is no way to get into the BIOS without password settings.

  If you set the USER password there is no way to get into the BIOS or OS settings without password.

  I put t know if your device comes preinstalled with DVD recovery, but if not all of these tools must be installed also. I don't know, but it must be installed TOSHIBA Console and TOSHIBA utilities.

• shaded in hp elite desktop 8300 bios virtualization options

  Hello

  I have a computer format microtour HP 8300 Elite convertible with Intel core i7-3770

  In the bios under the security system, I don't then activate intel vt - x and vt - d intel.

  P/N: C3B59ESR #ABV

  I tried upgrading to the latest BIOS v2.90, but without success, checked also all other options in the bios, a full CMOS reset... but no luck on either.

  Please advise!

  Below is a picture of the options as shown in the bios. As you can see I can only turn the prevention of execution of data.

  

  OK, problem solved. Some how the TPM has been blocked in an undefined state. After forcing the Activate by using the bios Setup utility and initialization of the TPM Module of windows (tpm.msc) I had to reboot and the bios prompted me to question if I wanted to activate the TPM. I accepted this and when entering in the bios by looking at the security settings of the system was able to disable Trusted Execution Technology and it gave me the option to turn virtualization options! It took me 5 hours to get the job of the thing.

• BIOS update failed - get a new motherboard?

  Well what can I say...

  I downloaded the update of the BIOS such as advised by TEMPRO or what ever it is called... Guess what the lovley fire off actavaited that became boring and are more and now my phone does not turn on!

  Toshiba would send me a new motherboard?

  Hello

  > Toshiba would like to send me a new motherboard?
  LOL :D
  I doubt that this is because why Toshiba ask a new motherboard?

  The update of the BIOS is not covered by the warranty and it should only be done if you have a problem with your laptop and not just for fun.

  What you can do now is to contact the nearest ASP. Technicians can try to reflash the ROM module, but in the worst cases, your motherboard should be replaced. :(
  Here, you can search the nearest ASP:
  [http://eu.computers.toshiba-europe.com] = > Support & downloads = > find an authorized service provider

  Welcome them

• HP Pavilion BIOS update

  I bought this laptop in December with 10 Windows installed. A few weeks ago I started to receive a notification in Support Assistant update THE system BIOS.  No matter how many times I run the update of the notice persists and never recorded Action log this update took place.

  After having checked with this Forum, it seems that other users have had problems with the updates to the BIOS and HP Support implemented warned against updating the system BIOS, unless there is a compelling reason to do so.

  1. because I am not having any issue that could force such update, should I simply reject the notification?

  2. If such an update is not advisable, why Wizard displays its notification?

  3 dismissing the notification would make this sensitive laptop security vulnerabilities?

  4. the instructions on the site of HP update BIOS theSystem are considerably more complex than the procedure launched from support Assistant. Exactly what is it?  The update to Wizard help Softpac number SP76353, Version F.19Ap1, size 8,89 MB.

  Hi @LAB7,

  Thanks for posting HP forums!

  I read your post and wanted to help.

  I understand that you have questions about the update of the BIOS. I agree that if there is no problem with the current system running, it is not necessary to update the BIOS. However, HP support assistant will fill the notification as soon as there is a newer version of the BIOS. You can reject the message and it won't cause security problems.

  There is another way to update the BIOS, by downloading it from the HP support page. You can put the number of your product here on this link: http://support.hp.com/us-en/drivers. Choose the right operating system on the page, it will show the drivers to your model, including the BIOS update.

  Hope that these could help. Let me know if you need more assistance.

  If this post helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• Re: Upgrade of the BIOS in a Toshiba Satellite L640

  Hi all, how is life. I have a Toshiba Satellite L640 with LUbuntu 12.10. My BIOS is v 1.70. I think I should update, because the latest version is 2.70 and he could solve some battery problems.

  The problem is that the bios upgrade software for the toshiba site is only for Windows. He is not yet back, in this case I could start from a USB Pendrive with FREEDos installed and do the upgrade.

  Then, someone knows some way? I read you try to run the upgrade through wine application is not recommended. Also, I guess that it is not advisable to pass by VMWare, but I don't know about it.

  Of course, I have no system to dual-boot, just Lubuntu Qantal.

  Thanks in advance

  You are right. Toshiba offers WIN version only, so it cannot be used with Linux or by using the external device as BACK up to date.

  What problems do you have with the battery?

• Satellite A200: Can't update Vista 64bits Bios 2.40

  Here's my question:
  I 2.20 Bios Vista 32 but I am trying to install the new version 2.40 and is impossible for me.
  I try and I try and have me always the same mistake, in box 15.

  I try a few different forms, Bios of x 64 vista, because I instaled Vista Edition home premium x 64.
  Vista 64 winphlash with Vista 32 ROM BIOS and still the same.

  I can't believe it but still the same problem

  Can someone help me?

  I put t see no reason to start a new thread if there is already a thread on the same topic:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=123211#123211

  It s always advisable to continue the discussion in a thread.

• Satellite A100: Error power USB from standby after update BIOS 5.20

  Hello

  I have problems of USB power since the upgrade my BIOS to 5.2 days on receipt of an email from Toshiba, advise the upgrade

  I got a 100 - 200 PSAA8E Windows XP Media Edition since the upgrade of the BIOS to 5.20 I get message error power but only when the computer comes out of standby

  The error message tells me that "a USB device has exceeded the limits of its hub port power.

  I have nothing connected to one of the USB ports

  I talked to guys tech at length to Toshiba, but they can't seem to explain or correct the problem - a same thought it could be a motherboard problem, but cut which like the timing is too coincidental to be something other than the upgrade of the BIOS.

  If anyone knows a fix, so I would be grateful - is - it possible to find a previous BIOS and roll back from 5.20

  I guess if it's the BIOS, then when they deliver another it will correct itself?

  Comments appreciated

  Phil

  Hello Phil

  Maybe again the stupid question, but I also want to know why you made the decision to do the BIOS update? Is there a particular reason or you just want to have laptop with the latest version of the BIOS.