User profile hive cleanup service do not appear to work with Vista!

Similar Questions

• Advanced actions do NOT appear to work ONCE the user fills in a questionnaire?

  Advanced actions do NOT appear to work ONCE the user fills in a questionnaire?

  In my project, I have disabled the Quiz results slide and manually set the actions of success/failure to "go to" a customized results slide:

  

  On results carts custom pass/fail (as well as all the slides that follow), I need to disable the playback bar so that the user cannot use the navigation controls. I have created a tip action to disable the playback bar and set it on every slide that follows the Quiz:

  

  The tip action fails to disable the playback on my personal results slides bar; but I know that the action does not work correctly because it works on all the slides that follow my personal results slides. This leads me to believe that there is something about the function "go to" success/failure that is causing my Advanced action not to function. Is there a work around for this?

  Just checked out, and it works for me. I combined the jump and turn off the bar reading a success and failure action:

  SuccessAction

  • Jump to drag the success
  • Assign the cpCmndShowPlaybar with 0

  FailureAction

  • Jump to slide fail
  • Assign the cpCmndShowPlaybar with 0

  Why you split? He was not even the need to create an advanced action.

• Using Windows 7 Outlook 2007 get more "not responding" just as with Vista.

  Original title: "Using Windows 7 Outlook 2007 put in more and more"not responding"just as with Vista." "Outlook pst file corrupt again and looks like I'm carefree like that again - not a very technical user here"

  Recently, I installed 7 due to problems with Vista. Prompted by crashing in Outlook 2007. Began with "does not" message and now I'm getting the same thing with 7. "» The last time it happened that I found the corrupted pst file and decided to skip the Vista and support 7. Love 7 (as turning on your TV in comparison) but get the same message. Outlook runs slow again and don't know what to do now.

  Hi JackinGeorgia,

  Welcome to the Microsoft Answers site!

  Are you facing this problem only with Outlook or any other program as well?

  It seems that some background programs is in conflict with the proper functioning of Office Outlook 2007. You can try to put your computer in a clean boot and check the base program leading Outlook hang.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The steps to perform a clean boot are given below:

  1 log on to the computer using an account with administrator rights

  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note:

  Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  Once you restart to try Office Outlook and see if you get the same error message. If not then follow the divide and conquer method mentioned in the article about which program is causing the problem.

  For more information about the clean boot, follow the below given link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart

  The question you have posted is related to Microsoft Office, and would be better suited to the Office Discussion groups. Please visit the link below to find a community that will provide the support you want.

  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our

  Microsoft answers Feedback Forum and let us know what you think.

• Dynadock does not work with Vista

  Press releases USA Toshiba the Dynadock was WXP and compatible with Vista, but it's NOT.
  Nobody knows when it's released software / or ways to get the Dynadock to work with Vista?

  Hi Stuart

  I put t know how it works in the United States, but here in Europe, according to the specification Dynadock, it only works with Windows XP SP2 home edition. I don't think someone can give you info on support for Vista especially here in the user forum.

  Try to learn more, contact your local dealer or partner authorized in your country.

• Is there a driver for Windows 7 available for this printer? One user in our office was able to make it work with the Vista driver.

  Is there a driver for Windows 7 available for this printer?  One user in our office was able to make it work with the Vista driver.

  According to the website of Epson here

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=Epson%20fx-980&OS=32-bit

  the latest drivers are for Windows XP 32-Bit.

  This Epson Web page says drivers

  http://eSupport.Epson-Europe.com/ViewArticle.aspx?LNG=en-GB&kbid=324521

  are available via Windows Update.

  Microsoft Windows 7 Compatibility Center:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=hardware&p=Epson%20FX-980%20Impact%20Printer&v=Epson&UID=C276001&l=en-us&pf=0&PI=0&s=Epson%20fx-980&OS=32-bit

  says it's not compatible.

  Clearly, there is an inconsistency in the tips above. I would try the road to Windows Update to see if his list - I would test it myself to see if its listed, but my connection to Windows Update seems to be suspended.

• I moved my HP Office Jet printer on my desktop and am not able to work with it now. Help me - what can I do to get it back on my list of printers Control Panel?

  I moved my HP Office Jet printer on my desktop and am not able to work with it now. Help me - what can I do to get it back on my list of printers Control Panel.

  Hi Liz L,.

  You can try to run the printer Troubleshooter and check.

  Printer in Windows problems

  You can also check out the following link to add the printer.

  Add or remove a printer

  Hope this information is useful.

• Windows 7 not stopped, why? With Vista and XP had no problem.

  Windows 7 not stopped, why? With Vista and XP had no problem.

  What can I do for her?

  Since I have Win7 on my pc does not more fully. All fans are
  turned on and the only way to stop it and hold the button for more information
  4 seconds.

  Can you help me?

  Thank you very much!

  Help!

  motherboard:Asus M2N - MX SE Plus (2 PCI, 1 PCI-E x 16, 2 DDR2 DIMM, Audio, Video, LAN)

  Life will be better

  I tried all the options, they are not working until I have to get into the BIOS and change the option to "Enable" APIC, save and reboot...
  My good computer shutdown!

  Please try to change the BIOS APIC option and find out for yourself on your computer!

• I installed Photoshop CS6 extended (student version) on my Mac in May last year. It has worked perfectly until recently when the system tells me that the program is perhaps not able to work with OSX (I have OSX 10.9.5). I have now uninstalled the PS one a

  I installed Photoshop CS6 extended (student version) on my Mac in May last year. It has worked perfectly until recently when the system tells me that the program is perhaps not able to work with OSX (I have OSX 10.9.5). I have now uninstalled the PS application and you want to reload. I have the S/N codes and redemption. How should I proceed?

  Please visit to download applications download Creative Suite 6 .

  Kind regards

  Hervé Khare

• my user profile is corrupted and will not load__

  • I can't get past the password. I put my password and I get a message saying that it cannot load the user's profile

  • I can't get past the password. I put my password and I get a message saying that it cannot load the user's profile

  Is this the real error message...
  Failed to load the user profile and the user profile service does not log

  If Yes, read on...
  You haveanother admin account , you can connect?
  If so, please do and do a system restore, if no help, run the Microsoft Support tutorial below.

  If you don't have another admin account, go into safe mode.
  Here's how to get safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and selectSafe Mode with network.

  In the window of logon in safe mode...
  1 can connect to your account administrator in safe mode?
  If so, do a restore system first, if no help, run the Microsoft tutorial support listed below.

  2. If you can't log into your own account, you see another admin next to your account in the logon screen?
  If you do, that one is the built-in Administrator account. By default, there is no password. Connect to it and new do a first system restore, if not help, run the Microsoft tutorial support listed below.

  If you are able to log on in safe mode, do a system restore. Choose a date when you were able to log in NORMAL MODE as your restore point.
  How to do system restore: http://www.vistax64.com/tutorials/76905-system-restore-how.html

  Tutorial from Microsoft support :
  http://support.Microsoft.com/kb/947215
  There are several methods,go through one by one.
  Method 3 has a "fix it for me" application
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• How to merge "Public Documents" and "My Documents"? The user in the 'Documents' files do not appear in 'My Documents', but are in "Public Documents".

  Win7 HP SP1

  These files appear in 'Documents', but do not appear in 'My Documents'

  They appear in "Public Documents".

  How can I merge the records of theses and never save in "Public Documents".

  Most is the user created, some files are program files.

  I have a profile of the 'public' on my computer when I connect, but I never use it, unless the office staff has a lot of programs open and I want to watch a movie

  or something I can change user to ease up on the use of the RAM.  Not sure if it is effective.

  examples of FLE: crashdump (empty)?, funny, auction sales of goodwill, agreements of music songs,.

  NativeFus_Log (empty)? , Tango (1The, a download of a messaging application), telescope, Youcam (program)

  There is also a 'my images' and 'Public Pictures', not sure why.

  Thank you!

  Right-click in the document library, click Properties.  Choose here, whether you want the public location to not use (or you can even remove it completely).  You can also choose which location is used as the default save location.

• the user of Windows 8 service does not have the opening of the session; user not found.

  I can't sing on my PC. The display of error messages: SERVICE does NOT have THE USER LOGIN; USER NOT FOUND.

  I only have one user on my PC and its administrator. I tried the system restore and I did not work.

  Hello

  Please try this patch and see if that helps:

  http://www.kapilarya.com/user-profile-service-failed-the-logon

  Hope this helps, good luck :)

• Captivate 7 user variables ' $$Learnername$ $", the name does not appear in its entirety...

  I use 7 Captivate.  I created a 'Learnername' user variable and added to the text entry area. However, the display name does not appear on the text of the legend. For example. Rebecca Donaldson has been added in the input box of text on the next page only Rebecca Dona' came.    I tried to increase the size of the text caption, rename the variable and redo everything, but nothing seemed to work.    Anyone know what could be the problem and how to fix it? Much appreciated!

  Insert the vsriable into the legend using the NVI icon the
  tab proprties. You can specify the number of characters to display.

• Essbase Service does not appear on the list of Windows Services

  Hi gurus,
  
  I tried to install the Hyperion Essbase 6.2.4 on Windows Server 2003 version and most of the thing works except that the Essbase Service itself does not appear on the Panel of Windows Services, whether on the previous installation of Windows 2000 Server.
  
  I tried reinstalling the software but the problem is still not resolved. I need to have Essbase Service on the list to allow the availability of service 24 x 7.
  
  I know that the Essbase version is quite outdated, but I'd be happy to hear from you guys.
  
  All advice please?
  
  Thank you.

  In version 6, you need to set your ip to the service. Go to start run and type cmd and click ok
  Then in the command window type
  Essbase.exe - service installation and press ENTER. The device must install.

• Background Intelligence Transfer Service does not appear in the services

  (BITS) Background Intelligent Transfer Service is not in the services on my XP Pro OS. My computer has stopped automatic update of windows, etc. It seems that the BITS disappeared. I'm at my wits end as the restoration of this service. I tried the system restore and no luck. Please can you recommend a way to restore this service without causing any serious problem for the software of the laptop?
  Thank you

  Open Notepad, copy and paste the following text in Notepad (the Windows Registry Editor is the first line, no space before it) save the notebook under the name of all the files and name it BITS.reg after u save it, double-click your file u saved BITS.reg & it will add the following data to the registry that will restore the BITS service:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BITS]
  'Type' = dword:00000020
  "Start" =: 00000002
  "ErrorControl" = DWORD: 00000001
  "ImagePath" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00,------.
  74,00,25,00 5 C 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73,------.
  00,76,00,63,00,68,00, 6f, 00, 73, 00, 74, 00, 2nd, 00, 65, 00, 78, 00, 65, 00, 20, 00, 2d, 00,------.
  6 b, 20, 00, 00, 6F, 00, 65, 00, 74, 00, 73, 00, 76, 00, 63, 00, 73, 00, 00, 00
  "DisplayName"="Background Intelligent Transfer Service".
  "DependOnService" = hex (7): 52, 00, 70, 00, 63, 00, 73, 00, 73, 00, 00, 00, 00, 00
  "DependOnGroup" = hex (7): 00, 00
  "LocalSystem ObjectName"=""
  "Description"="background transfers files using the bandwidth network inactive." If the service is stopped, features such as Windows Update or MSN Explorer will be unable to automatically download programs and other information. If this service is disabled, any services that explicitly depend on can fail transfer files if they do not have a mechanism of fail safe to transfer files directly through IE in case BITS has been disabled. »
  "FailureActions" = hex: 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 03, 00, 00, 00, 68, e3, 0c,------.
  00,01,00,00,00,60, EA, 00, 00, 01, 00, 00, 00, 60, ea, 00, 00, 01, 00, 00, 00, 60, ea, 00, 00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BITS\Parameters]
  "ServiceDll" is hex (2): 43, 00, 3 a, 00 5 c 00, 57, 00, 49, 00, 4F, 44, 00, 00, 4f, 00, 00, 57, 53,------.
  00, 5 C, 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 71, 00, 00, 6 D, 00,------.
  67,00,72,00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00, 00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BITS\Security]
  "Security" = hex: 01, 00, 14, 80, 90, 00, 00, 00, 9 c, 00, 00, 00, 14, 00, 00, 00, 30, 00, 00, 00, 02,------.
  00, 1 c, 00, 01, 00, 00, 00, 02, 80, 14, 00, ff, 01, 0f, 00, 01, 01, 00, 00, 00, 00, 00, 01, 00, 00,------.
  00,00,02,00,60,00,04,00,00,00,00,00,14,00, fd, 01, 02, 00, 01, 01, 00, 00, 00, 00, 00,------.
  05,12,00,00,00,00,00,18,00, ff, 01, 0f, 00, 01, 02, 00, 00, 00, 00, 00, 05, 20, 00, 00, 00,------.
  20,02,00,00,00,00,14,00, 8 d, 01, 02, 00, 01, 01, 00, 00, 00, 00, 00, 05, 0, 00, 00, 00, 00,------.
  00,18,00, fd, 01, 02, 00, 01, 02, 00, 00, 00, 00, 00, 05, 20, 00, 00, 00, 23, 02, 00, 00, 01, 01,
  00,00,00,00,00,05,12,00,00,00,01,01,00,00,00,00,00,05,12,00,00,00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BITS\Enum]
  "0" = "Root\\LEGACY_BITS\\0000."
  "Count" = DWORD: 00000001
  "NextInstance" = DWORD: 00000001

• Error message: "the Task Scheduler service does not appear to start" when you back up files.

  Original title: error in Vista Task Scheduler

  Hello. I am running Vista Home Basic. I'm trying to back up my files, but get an error stating that "the Task Scheduler service seems not be started. Please start the Task Scheduler service and try again. "I don't know what that means and I couldn't save my files before. Do you know how I can fix this problem? Thank you

  Hi MK_806,

  You can try to scan the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Check if there is information in Event Viewer which may help us to solve the problem:

  What are the information contained in the logs of the event (Event Viewer)?

  For more information, you can also consult the following article:

  Troubleshooting Task Scheduler

  Hope this information is useful.