UCS460 M1 with single drive

Similar Questions

• Raid PowerEdge r.620 with single hard drive controller

  Hi all

  I have Dell PowerEdge r.620 with 1 * 1 TB hard drive, Raid Controller using mini H710... When I try to install Win Server 2008/R2 x 64 the HDD is not detecting, I've read in this forum of the disc cause hard does not detect is pilot raid is not installed, but I don't have that single hard drive is possible to set up raid with single hard drive or I don't have to use raid controller but I still don't understand how to set up the server with no raid...

  Thank you...

  Dimm21

  Sorry for the late reply, do you mean raid controller in the server? If you want to say, I always do not install driver coz is new server than i've got...

  I want to know, if posibble install raid on one hard drive and how to configure who... Server raid controller is mini H710

  Thanks for your response

  Yes, the RAID controller.  One you have?  I'll assume a PERC H710 for now:

  The H710 PERC is NOT compatible non-RAID (you cannot use a single disk without RAID)... in order to use a hard drive, you MUST configure a single drive RAID 0.  This must be done in the RAID controller BIOS utility, accessed by pressing CTRL-R during POST when prompted.

  Once configured, you need TO load the driver for the operating system, see the drives connected to the controller.

  If you have a H310, it SUPPORTS no RAID, so you do not have to configure anything in the RAID controller BIOS, HOWEVER, you MUST always load the RAID controller driver during installation.

• can I share documents in iCloud drive with another drive to iCloud user?

  can I share documents in iCloud drive with another drive to iCloud user?  If so, how to do that?

  No, at the present time, iCloud is configured for use by a single account to share data between devices of the owner of this account.  Your best bet for what you are looking for would be to use a third party application like Dropbox or Google Drive.

  You can share files individual even if - iWork sharing links to documents in iCloud - Support Apple iWork

• Equium A210: "tsst corp ts-l632h" firmware is not compatible with my drive

  Last year I had an Equium A210 17l of pc world. I recently bought some dvd - r tdk discs and the drive cannot read them. It's as if there is no disk in the drive.
  So I thought I'd hunt around to see if there is updated firmware for the drive. I downloaded the firmware from this site, but when I try to update it says that the disc is not compatible! Evey bit of software I said the player is a * tsst corp cddvdw ts-l632h * with firmware to01.

  The firmware I'm trying to download is [this | http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=UK&selCategory = 2 & selFamily = 382 & selSeries = 173 & selProduct = 742 & STAS hortMod = 680 & language = 13 & selOS = 26 & selType = 50 & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = 8 & electedLanguage s = 13 & type = 50 & page = 1 & ID = 63137 & DISO =-1 & driverLanguage = 42]

  But whenever I try to run it it says that it is not compatible with my drive! What is going on?

  Jim Venner

  I recommend you to first install the 2 firmware until the you´re trying to upgrade the drive with the a3 because it is possible that the a3 requires the 2.

  Please visit the site to download drivers, download the firmware 2 and check if it works.
  Would appreciate any comments on your part.

  Welcome them

• Since the Safari update to the most recent, problems with Google Drive

  Since the update of Safari to latest, problems with Google Drive

  There are serious issues with Google Reader itself at the present time.

  Google is working on it.

  I suggest stop smoking GoogleDrive and remove (with the minus sign) of the SystemPreferences-> users & groups-> LoginItems.

  Until further notice. Take no risk.

• Need help with DVD drive - Qosmio G30

  Hello

  Sorry, my English is so bad. I need your help. I have a Qosmio G30 (PQG32E) and I have a problem in the DVD player. I see a (!) instead of the DVD drive in Device Manager. I think it's a problem with the driver. I don't know what I can do to solve this problem.

  Please can you help me?

  Perhaps this problem can be solved very easily.
  Have you noticed a code error 31 or 32?

  Possibly a registry entry is corrupted.
  Go into the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Remove the drive from Device Manager CD/DVD, and then restart the laptop.

  I would appreciate any comments from you.

  Good luck

• Pavilion 14-v202tx: problem with the driver

  Hello

  I got a Win7 64 bit and I have a problem with a driver: network controller pci device and BCM43142AO

  My laptop HP Pavilion 14-v202tx

  Please help me

  Hello

  Broadcom Wifi

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66445.exe

  Broadcom Bluetooth software

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66402.exe

  PCI device

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Kind regards.

• JP Pavilion envy 17 n008nl: problem with a driver

  Hello

  I can't solve a problem with a driver.

  Here is the description:

  \VEN_8086&DEV_095A&SUBSYS_50108086&REV_61\4&3ac2d821&0&00E3

  Should which driver I install?

  Thanks in advance

  Here are the network drivers. Please install the network drivers:

  http://support.HP.com/us-en/document/bph07165

  ALSO

  Try to install HP Support Assistant that will automatically download and install updates/drivers:

  HPSA link:

  http://WWW8.HP.com/us/en/campaigns/hpsupportassistant/hpsupport.html

• niDMM.cs exception: "the device was not recognized. The device is not supported with this driver or version. »

  Hi all!

  I have a question about using a DMM (PXI-4065) with VStudio 2008 and Measurement Studio 2009.

  Because DMM are not always supported in .net, I downloaded niDMM.cs 3.0 wrapper of the web site of NOR.

  I also downloaded example c# measure DC Voltsto compare with my request.

  Both an example and my application fail trowing the exception [-1074118656] 'the device was not recognized.  The device is not supported with this driver or version. " class constructor is called.

  DMM = new InstrumentDriverInterop.Ivi.nidmm ("PXI3::12:INSTR", true, true);

  I guess it is function of device PXI!

  I also tried to use a VISA alias as "pippo" and then I tried to insert a device unexistent name. In any case the same exception was trown.

  NOR-DAQmx 8.9.5

  NOR-DMM 3.0.1

  NI-VISA 4.6.1

  NOR-MAX 4.6.2f1

  Roberto

  Hello Robson,

  Maybe you areusing an incorrect descriptor itrument, try please the instructions contained in the following document:

  KB 33A96PCW: receive error-1074118656 when running OR DMM screws

  Let me know if this might help.

  Best regards.

• How to set the parameters of the AKD with LABVIEW driver?

  Hello

  I am looking for a simple example to set or read the AKD with Labview driver settings.

  The AKD has ethernet communication and control is analog - AKD-P00306-NBAN-0000

  I want to use Labview to read the paramerters even as Kollmorgen WorkBench

  Thanks for your help

  Thank your for your help

  I found a solution with the TELNET Protocol

• Card mother H-IG41uATX HP works @ 1066 Mhz with single 2GB 1333 Mhz RAM

  Hello

  My card mother H-IG41uATX HP works @ 1066 Mhz with single 2GB 1333 Mhz RAM (Apacer PC-10600) @ 7-7-7-20.

  BIOS is Version 6.08, 07/07/2011.

  BIOS it detected as PC-8500. CPUZ shows like PC-10700 work clocked at 533 Mhz (= 1066 MHz DDR).

  The processor is Intel Pentium Core 2 Duo E 8400 3.06 GHz with FSB 1333 MHz.

  WIndows 7 operating system

  1. Why does is not able 1333 Mhz motherboard @ full speed?

  2 working memory @ 1066 MHz @ 7-7-7-20 VS memory work @ 1333 MHz @ 9-9-9-24, which is better?

  Khelifi

  Sure... While theoretically fastest speed of memory should be faster, there is little or no difference in the overall performance of the memory. The memory CASE latency generally increases the rated speed increases. Latency means basically 'backwardness' and this latency to counterbalance the gain by increasing the speed. Still, you would never notice a difference between the two.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• I'm trying to set up a wireless network and it is said that something does not work with the driver.

  Hi there tried to hook my laptop up to wireless as ethernet cable keeps me tripping. I am complete technophobe and propably have the only laptop that gets used especially to open the door.

  Have tried everything I can think even threaten her with glass of water after trying to connect to the wireless network, that it is said that there is something that doesn't work not with the driver if it means something to you. I have a toshiba, if it helps.
  Thank you
  original title: I hope someone can help technophobe

  It is said that there is something not working only not with the driver

  You probably need to install some network drivers for your wireless card.

  Download drivers

  Visit the manufacturer's Web site and select your computer model (this is usually done in the Support section). You should be able to download drivers for your model. Download the driver (s) and follow the instructions to install - every computer is different, so I can't give you exact directions. You can also try to use Windows Update to get drivers - it is located in the start menu.

  Update of the hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Establishment of a network domestic:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  For more information network:

  Start here to set up a home network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/start-here-to-set-up-a-home-network-in-Windows-7

  What do I need to connect to Internet:

  http://Windows.Microsoft.com/en-us/Windows7/what-do-I-need-to-connect-to-the-Internet

  Adding a wireless computer

  Set up a wireless network:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  If your network is wireless, run the wizard to Set Up a network on the computer attached to the router.

  1. open Set Up a network by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center click on set up a new connection or a network and then click on set up a new network.

  2. the wizard will guide you in the process of adding other computers and devices to the network. For more information, see:

  http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network

  Manually add a wireless computer

  1. sign the computer.

  2 open the connect to a network by clicking the network icon in the notification area.

  3. choose the network wireless from the list that appears and then click on connect.

  4. type the network security key or password if you are prompted to do so, and then click OK.

  -You will see a confirmation message when you are connected to the network.

  5. to confirm that you have added to the computer, follow these steps:

  -Open network by clicking the Start button, then Control Panel. In the search box, type network, and then, under center network and sharing, click on view network computers and devices.

• I bought a computer from a business and it came not with all drives.

  Original title: I bought a computer and it came not with all drives.

  I bought a computer from a business, and it was a computer on the network. It came not with all drives. Is it possible to reformat the system with out having to re - buy windows xp or office? Can I get copies of XP and Office? I still have the XP sticker with the computer.

  If they don't give you the disks, all you need is a boat anchor. Ask them to give you the disks and product keys. Otherwise, you will need to buy.

• Cannot install Vista service pack 2 is 800f0a09 error code with the message that there are problems with the driver for dell latitude

  Original title: why I get error code 800f0a09 to upgrade to windows vista service pack 2

  I have a laptop del that is running on Windows Vista Edition Home Premium. I tried to download itunes but it requires service pack 2. Whenever I try to update to service pack 2, I get the message following error code 800F0A09. He also mentioned problems with the driver for dell latitude. What can I do to fix this please.

  Thank you

  Hello

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  You can not install Vista Service pack 2 and get the error with code 800f0a09 and the message that there are problems with the driver for dell latitude.

  The problem may occur if some of the components of the update are corrupt.

  What is the full error message that you receive?

  I suggest you follow the steps mentioned below to check if the problem is with the update components:

  Method 1: Reset the update components

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Run the system update readiness tool

   

  See the site:

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Method 3: Turn off the antivirus software

   

  See the site:

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-in/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card

  connection network card

  my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card... I'm not sure how to solve the problem of the dat

  Hello

  Did you change your computer?

  I suggest you to follow the links and check out them.

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems