UN able to turn VM

Similar Questions

• Not able to turn Mute or LED on / off on Satellite Pro P300 - 19 p

  I am more able to turn the Led lights on and off via the touch button with a picture of a light with a cross through it.

  Any ideas?

  First of all, you should check if this button has been configured correctly in the Toshiba button control.
  This utility is located in the assistance of Toshiba-> optimize

  Check if on / off lighting or Mute has been selected.

• I use Envy 17 with a job posting and I need to be able to turn it on even if the lid is closed? Thnx

  Hey! Regarding my HP Envy 17 1085 eo. I use my Envy 17 with an external display, and I have to be able to turn on my pc, while the cover is closed (clamshell). It is possible while the pc is in "standby", while activating the mouse keyboard og - but Windows break mode standby after a certain time, leaving me frustrated as I then need to open the lid of my desire and press the button 'walk', to use the Windows. Is it possible somehow? Thank you very much!

  Hey dhalb_,

  Have you ever watched the Power Options window (start > type 'power' > click Power Options) where you can change when the computer sleeps (left)? As long as you stop the computer periodically (2 - 3 times a week, if you use it every day) it would be nice to never go in "standby mode" while it is plugged.

  For a while, I used a laptop as a desktop replacement with an external monitor and ran into the same frustration as yourself. I shut down my computer after each use if so I came up with a scheme where I could leave the screen all half open, just enough to be able to press the power button.

  If you prefer to go in standby mode, you can go to the advanced power settings (Power Options > change Plan settings next to the selected power management > change advanced power settings), extend your sleep and set "Hibernate after" connected to never by typing 'Never' in the field minutes. Click on apply and OK.

  I should mention that it does not extend the life of your computer to run constantly. Hard drive failure and the motherboard issues sees much more often on machines that are constantly running. Computers bogged down and run slowly when the memory is full. Memory erase them and will reset when the computer is turned off. Here's a link explaining more on the accumulation of memory and aging of the material.

  I hope these suggestions help. Please let me know if you have any questions.

• I use photoshop 5.1. I'm painting a picture. previously in the tool hue/saturation from the drop of the image then adjustments, I was able to turn an image into sepia or cyanotype so that change the hue, saturation & lightness, but TH

  I use photoshop 5.1. I'm painting a picture. previously in the tool hue/saturation from the drop of the image then adjustments, I was able to turn an image into sepia or cyanotype as well as change the hue, saturation & lightness, but the minute his does not give me this option. can anyone help?

  To reset the preferences:

  If Photoshop is already open on your screen, close (Quit). Then press and hold Shift + Ctrl + Alt (Win) / command + shift + Option (Mac) on your keyboard and start Photoshop.

  A dialog box appears asking if you want to delete the preferences file existing ("settings"). Click Yes in the dialog box. The existing preferences file will be discarded and a new one will be created.

• I couldn't deactivate my license from my old laptop because it is quite a pity and not able to turn on more

  Hi, my old laptop is blackout already. So now I use a new, but I could not use my license back because I n turn off of my old laptop. Problem is I have not managed to disable my old laptop, because the computer laptop completely damage and not able to turn on more.

  In this case, you will need to contact Adobe technical support, they will certainly check and assist you accordingly:

  [Click on always need help (help), then select the Chat option]

  Contact the customer service

• Illustrator does not recognize my GPU NVIDIA 920 M, what driver is up-to-date. Even with my Intel Graphics 5500 which is recognized, I'm not able to turn the GPU performance. What can I do?

  Illustrator does not recognize my GPU NVIDIA 920 M, what driver is up-to-date. Even with my Intel Graphics 5500 which is recognized, I'm not able to turn the GPU performance. What can I do?

  In addition, all the menus to stay for a while and then disappear. I have to be fast to all operations, including by opening a file, apply an effect or export a file.

  Images:

  

  Jonathan,

  I'm afraid that you are locked into the GPU problem, described by butz in post #13 here:

  https://forums.Adobe.com/message/7773402#7773402

• How can I get my PDF to save mode landscape instead of portrait orientation? I am able to turn to see the landscape and save the file. However, when I open the new file is saved, it's back to portrait mode. Help!

  How can I get my PDF to save mode landscape instead of portrait orientation? I am able to turn to see the landscape and save the file. However, when I open the new file is saved, it's back to portrait mode. Help!

  Hi samanthac39242619

  You must register to organize PDF service https://cloud.acrobat.com/organizepdf & use PDF tool organizing to turn the pages at all times.

  Kind regards
  Nicos

• able to turn off the photo review?

  I just bought a DSC-HX200V and would like to be able to disable the picture review function after that I took each picture. Currently, I have to wait a few seconds after each shot until I get the shot and I'm concerned that he may make me miss shots. I also have a Panasonic FZ150 and it allows me to turn it off so I can keep shooting. Everything about the Sony is so much faster and I really like the zoom, but examination of the picture slows down the whole process. Is there a way to disable this option?

  To work around the problem, you can half press the shutter button while the image is automatically continued on the screen. In doing so, the automatic review time is cut short and the camera will immediately return to the shooting mode. This will speed up the process of shooting in succession.

  If this post answered your question, please mark "accept as a Solution.

• HP pavilion g4 1104 dx: hp g4 not able to turn dx

  My laptop has a problem because when I press the button walk / stop it shows flashing on the power supply and caps lock button once. The fan also runs for a few seconds and then everything goes off. It does not display anything. What can be the problem? Please help.

  Hi @cliffkaka

  Thank you for your request, I will do my best to help you!

  I understand that when you turn on your notebook, you see some flashing lights.

  Here is a link to the laptops HP - troubleshooting LED blink Codes or beep at start or start Codes will help you to decide the issue.

  If you need a replacement part that I provided the HP G4 Notebook PC where you can get replacement procedures and the numbers that they are required.

  Good luck!

• I am not able to turn off my laptop with the software

  Hello

  My laptop is flaky for some time but now it will not off without using the physical switch. I tried to reinstall Vista, but as you know, during installation Vista must be turn off and on several times to install.

  The first time Vista try to turn off, it crashes until I have to cut the physical switch so can never go beyond this stage.
  Anyone got any ideas?

  Thank you.

  Hello!

  You must give us a bit more information:
  -laptop model
  -Microsoft disk or Toshiba recovery DVD

  In your case, I would try the recovery disk.

  Maybe you can try another CD/DVD, for example Linux boot disk if you have the same problem.

  Good bye

• Not able to turn on the Touchpad

  So I just bought the Dm4 2070us TODAiY and already the touchpad works wrong. It seems when my fingers accidentally touch the section "disable touchpad" pad touch it just closes and won't turn on again, is there a special way to wake up, he, y at - it a way to prevent this all together? Any help would be appreciated

  In the settings of the synaptics drivers include a feature called ACM -Mitigation of accidental Contact.refer - c01983909 to change the size of the toucpad area where you can disable the area of follow-up on the touchpad button ON / OFF.

  

• Not able to turn off old computers so Acrobat Pro works... Help!

  I have adobe acrobat pro and just got a two new computers to replace the two who died. Now, we can not use our acrobat pro, what he tells us we have to open another program like Photoshop. I guess he wants me to turn off my old machines, which is not possible given that the drives are dead... what I'd do to fix this?

  Hey schwerind,

  It is not possible to deactivate the license on a computer with dead hard drives.

  You could try installing Acrobat on a new computer and if she asks you a serial number, then Contact the customer visit to get more assistance related to the activation of your product.

  Kind regards

  Ana Maria

• Unable to activate bluetooth for pc Dell 1545. Downloading the software? and still not able to turn on bluetooth. Control Panel doesn't recognize all bluetooth connectivity

  Check updates for bluetooth and found 2 on Dell updates. Downloaded both, but when entering the control panel and clicking Add, nothing happens. Do not see the bluetooth icon on the task bars and no ACK on Control Panel

  Hello
   
  Do you see excalamtion mark next to the bluetooth module in Device Manager?
   
  Also check if the bluetooth module is listed in the Device Manager.
   
  Follow these steps and check if they help.
   
  Step 1:
   
  Make your devices bluetooth discoverable and taken in charge by your operating system.
   
  Step 2:
   
  Uninstall and reinstall the Device Manager bluetooth modules, and check if it helps.
   
  a. Click Start, type "Device Manager" in the search box and press ENTER.
  b. click on continue. The Device Manager dialog box appears.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. in the list of device types, click bluetooth module,
  d. right click on the device, and then click Properties.
  e. click on the driver tab.
  f. click on uninstall. Click OK.
  g. in the Device Manager dialog box, click the Action menu and click Scan for hardware changes.
  h. restart the computer automatically reinstall the drivers.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Sound is not working, not able to turn on the audio device

  my sound I have doesn't work do not at all. I tried active but it only show the inactive button

  someone knows how to fix this?

  Hello
  
  If it only shows the option to disable that this particular reading device is already activated. I ask you to check if it is the device of correct reading you want to use.
  
  Method 1.
  Allows us to do all of the methods listed in the articles below and check if we get the sound.
   
  No sound in Windows
  http://support.Microsoft.com/GP/NO_SOUND
   
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
   
  Method 2.
  Also, if your sound problem is specific to Windows Media Player or Windows Media Center, you must follow these steps:
  a. Click Start, and then type sound in the text box start the search.
  b. nattering in the Panel section listed above.
  c. click on the Read tab and click on the image with a green check mark next to him (should be the default device) so it is highlighted.
  d. click on the properties button.
  e. click on the Advanced tab.
  f. uncheck the box next to this line: "Allow applications to take exclusive control of this device."
  g. click OK.
   
  Also, make sure you have the latest audio drivers installed on the computer.
  See the article below for more information.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• touchpad not being able to turn on or off

  tried to power off completely, but it does nothing, light just blinks.

  Trying to force a reboot - hold down both the power switch and the Center button for about 20 seconds until you see the logo of HP flashing, then release them.

  After the reboot, verify normal operation.

  WyreNut