Unable to access the attachment, installation photos in hotmail.
When I click on attachments, photos, etc. in hotmail nothing happens, almost like the entire facility for sending attachments has been disabled. I recently had a virus deleted. Everything else works fine, I just got a new Norton antivirus installed and my computer everything had been cleaned by a computer expert.
Hello tmb09,
There is a separate instance specifically for Hotmail, MSN and Windows Live products.
Click on the link below to ask your question in the appropriate forum.
http://windowslivehelp.com/product.aspx?ProductID=1
They will have the best experts able to solve your problem.
Sincerely,
Tags: Windows
Similar Questions
-
Original title: I tried to apply the photo viewer to open a file and the photo viewer icon replaced each icon on my desktop. Now I can't open anything on my desktop. What is going on?
The name is below the icon, but the correct icon has been replaced by windows Photo Viewer icon. When I click to open it, it says: windows Photo Viewer cannot open this photo because Photo Viewer does not support this file format, or you do not have the latest updates... I don't know what I did!
Hi,
Thanks for posting your question in the Microsoft Community.
From your problem description, I understand that you are unable to access the photo viewer; and also cannot access the desktop icons because they are changed to the photo viewer icon. Please let me know if you do not experience this problem.
I understand the inconvenience caused to you. I'll help you solve the problem!
Before troubleshooting, I have little information on the issue.
1. did you of recent changes to the computer before this problem?
Try the methods suggested in the article below and check after each method:
Method 1: Icons change incorrectly in Windows: http://support.microsoft.com/kb/2396571
Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the in the Microsoft Knowledge Base: 322756. How to back up and restore the registry in Windows: http://windows.microsoft.com/en-us/windows-vista/Back-up-the-registry
Method 2: Run scan files system (CFS) auditor, to repair missing or corrupted system files.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7: http://support.microsoft.com/kb/929833
If the problem persists, post your reply with the results and the questions asked above. We are happy to help you further in the advanced troubleshooting steps!
It will be useful.
-
Unable to access the BPM UI composer despite the installation of BPM Suite 11 g
Hello
I installed the suite BPM (& SOA suite too) but even after starting Admin Server and managed server (soa_server1), I am unable to access the composer BPM (I'm
with the help of URL similar to http://host/bpm/composer) if I can access WLS console, EM, BPM worklist application etc. correctly. I just wanted to check, what else to do to use BPM dial? Kindly let me know.
Thank you
HardHi harsh,
Did you also put the news of port as following: http://localhost: 8001/bpm/composer
Kind regards
Rommel Pino -
Firefox is unable to access the internet
Hello
Firefox is unable to access the Internet. Internet in the phone works, because all applications in my phone are able to access the Internet. I tried to access several different web pages. Their work. The screen is all black, no error messages appear. The strange thing is that Firefox Sync seems to be able to connect to the server, and I can download plugins.
Best regards
Joel HedestigYou can try using the beta version of firefox mobile?
https://play.Google.com/store/apps/details?ID=org.Mozilla.firefox_beta
-
MY mail server hardisk full so cannot start services & also unable to access the mail server
I have the server messaging, but Hardisk ful then failed to start Services and also unable to access the e-mail mail server troubleshooting steps.
Hello
The question you have posted is related to professional level support. Please visit the below mentioned link to find a community that will support what ask you:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
-
I am unable to access the Windows XP updates and unable to set up the automatic update. I have not given an error code. I was only told I can't perform these functions. I don't have the windows disk that the computer came preloaded with Windows and I don't remember the Administor password I created 5 years ago. Can anyone help?
Assume that:
http://support.Microsoft.com/kb/316524
You receive an error message 'Administrators' only when you try to visit the Windows Update Web site or the Microsoft Update Web site
http://support.Microsoft.com/kb/189126
Microsoft's strategy concerning lost or forgotten passwords
What I can offer: http://support.microsoft.com/kb/321305
How to connect to your Windows XP-based computer if you forget your password or if your password expires
-
I'm unable to access the internet with my CV due to the reception of the following - xp Antispyware 2011 alert. How can it be deleted? I have McAfee Total Protection Plus, but which apparently does not work. Help, please.
This problem existed for about a week.Hello
· What is the exact error that you are experiencing?
· How long have you been faced with this problem?
· Remember to make changes to the system?
It seems that your system is infected by a virus or malware. I suggest you to run a scan on the system online to make sure that your system is free from viruses and malware. Click on the link below.
http://OneCare.live.com/site/en-us/default.htm
Also, I suggest you to download and install Microsoft Security Essentials on the system. Click on the link below.
Microsoft Security Essentials
http://www.Microsoft.com/security_essentials/
I suggest install Malicious Software Removal Tool from the link below and then install it on the system and are looking for malware.
Malicious software removal tool
http://www.Microsoft.com/security/PC-Security/Malware-removal.aspx
-
When install or remove a product, get error cannot access the windows installer
Whenever I'm installing an update or remove a product, I get the message "Cannot access Windows Installer"
Hello
· What are the programs you are trying to install on the system and updates?
· Have you managed to install the updates before on the system without any problems before?
· Remember to make any change to the system?
I suggest you follow the steps mentioned below.
Method 1:
I suggest you to check in services if the service Windows install is set to automatic. Follow the steps mentioned below.
a. Click Start--> Run--> "services.msc" [press on enter]
b. scroll down and find "Windows Installer".
c. right-click on it and choose "Properties".
d. on the properties page, verify that the "Startup type" is set to 'Automatic'
e. confirm the "Service status" is "started."
f. click "OK".
Method 2:
I suggest you unregister re-register Windows install and check if it helps. Follow the steps mentioned in the article below.
Error message "Could access the Windows Installer Service" when you install the application
http://support.Microsoft.com/kb/319624
Method 3:
I suggest you to reset the windows update components and check. Follow the steps mentioned in the article below.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Method 4:
I suggest you to download and install Windows install from the link below and check.
Windows install 4.5 Redistributable
I suggest you follow the steps mentioned in the articles given below for further assistance.
Error message "Could access the Windows Installer Service" when you install the application
http://support.Microsoft.com/kb/319624
How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer
http://support.Microsoft.com/kb/2438651
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit ourMicrosoft answers feedback Forum and let us know what you think. -
System cannot access the windows installer (error 641)
original title: System cannot access the windows installer
Have free AVG and cannot uninstall it or install the Windows updates. message is "cannot access the Windows install. Get error 641 on windows. Vista home premium 32-bit operating system. Recently downloaded IOLO System Mechanic recommended by DELL. problem seems to be since then but do not respond IOLO
Download a FREE program called Revo Uninstaller
http://www.revouninstaller.com/revo_uninstaller_free_download.html>. It allows to uninstall any program completely, including the files of monitoring programs. works very well, that you should have no problem more reinstall after uninstall this program.
Just don't allow the computer to restart if the part of Revo Uninstaller asks you if you want to restart now or later. Select afterwards and let Revo finish an orphan looking for registry entries. Reboot after Revo ends.
TIP: If you still think again your registry database must be cleaned, repaired, amplified, to the point, healed, twisted, fixed, enlarged, "swept" or optimized (it isn't), readhttp://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See alsohttp://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx
The Mechanic.and of dumping life system you will be happy.
UTC/GMT is 09:11 Sunday, May 20, 2012
-
After I 'google' a web site address, I am unable to access the page directly by clicking on the link in the address; the page hangs and does not respond.
What antivirus you have installed before? Is the virus/malware-free system? If you have a current antivirus installed and you went through at least some of the malware removal steps I list in the link I have given if you are sure that the system is clean, uninstall McAfee and see if that solves your problem. If you connect to the Internet behind a router, you can be sure for this quick test. If you are connected directly to a cable/dsl modem, then firstly download Avast or even Microsoft Security Essentials (both free). Then, disconnect from the Internet and uninstall McAfee. Install the antivirus of your choice and test. If all goes well, your problems have been caused by McAfee. This is not surprising since McAfee is perhaps the worst choice for safety, we could do.
If you had any antivirus installed before McAfee, then you must go through all stages of thorough removal of malware listed in the my link before anything else. MS - MVP - Elephant Boy computers - don't panic!
-
We have a Nextbook but are unable to access the Internet at home
We have a Nextbook but are unable to access the Internet at home, even if we have a laptop and PC. How to solve this problem? Thank you.
Hi Vernon,
1. you are trying to connect the Nextbook to wireless (Wi - fi) network in your home?
It is a tablet based on Google's Android. As it comes to one product other than Microsoft, I suggest that get you in touch with the manufacturer about this issue. You can contact them at the following link:
http://www.nextbookusa.com/techsupport.php
Hope this information is useful.
-
I'm unable to access the Web site rewards club mail
I'm unable to access the Daily Mail online REWARDS CLUB site WEB TO ENTER MY NUMBER ONE
Hi BrianSheridan,
1. what happens when you try to connect to the site?
2. you receive an error message?
3. what web browser do you use?
4. what version of IE are you using?
5. are you able to open the Web site in the other computer?
If you use Internet Explorer, then perform the following troubleshooting methods:
Method 1:
Optimize Internet Explorer, and then check how it works.
Check out the following link to optimize Internet Explorer.
How to optimize Internet Explorer
Note: This article is also applicable to Internet Explorer 9.
Method 2:
Also perform the following troubleshooting steps.
Can't access some Web sites in Internet Explorer
Method 3:
If you use Internet Explorer 9, then perform the steps in troubleshooting at the following link.
Some sites Web may not behave as expected in Internet Explorer
-
Unable to access the network using Edimax N300 universal Wi - Fi extender
Original title: Edimax Extender will not get internet access
I naoual got a N300 Eimax universal Wi - Fi extender but I am unable to connect to the internet. They suggest setting up near the wi - fi access point to get the signal stronger and I got to show connected in the window ' currently logged in ', but it does not connect to the network. EDIMAX has proposed upgrading the firmware, but I was unable to get any joy with that either. Anyone with any ideas would be appreciated.
Hi Gofchap,
Thanks for the question of validation in Microsoft answers community!
I imagine the frustration you feel when you are unable to access the network.
The problem may be because of the Extender, diverter, or with the network adapter.
1 did you do changes on the computer before the show?
2. do you receive any error messages?
3. What is brand and model computer?
4. have you tried to connect without using the extender?
I suggest you to visit:
Wireless and wired network problems
I hope this helps. If the problem persists, let know us and we would be happy to help you.
-
remote VPN and vpn site to site vpn remote users unable to access the local network
As per below config remote vpn and vpn site to site vpn remote users unable to access the local network please suggest me a required config
The local 192.168.215.4 not able ping server IP this server connectivity remote vpn works fine but not able to ping to the local network vpn users.
ASA Version 8.2 (2)
!
host name
domain kunchevrolet
activate r8xwsBuKsSP7kABz encrypted password
r8xwsBuKsSP7kABz encrypted passwd
names of
!
interface Ethernet0/0
nameif outside
security-level 0
PPPoE client vpdn group dataone
IP address pppoe
!
interface Ethernet0/1
nameif inside
security-level 50
IP 192.168.215.2 255.255.255.0
!
interface Ethernet0/2
nameif Internet
security-level 0
IP address dhcp setroute
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
Shutdown
No nameif
no level of security
no ip address
management only
!
passive FTP mode
clock timezone IST 5 30
DNS server-group DefaultDNS
domain kunchevrolet
permit same-security-traffic intra-interface
object-group network GM-DC-VPN-Gateway
object-group, net-LAN
access extensive list ip 192.168.215.0 sptnl allow 255.255.255.0 192.168.2.0 255.255.255.0
192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
tunnel of splitting allowed access list standard 192.168.215.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
MTU 1500 Internet
IP local pool VPN_Users 192.168.2.1 - 192.168.2.250 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
enable ASDM history
ARP timeout 14400
NAT-control
Global 1 interface (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 59.90.214.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
AAA authentication http LOCAL console
AAA authentication enable LOCAL console
LOCAL AAA authentication serial console
Enable http server
x.x.x.x 255.255.255.252 out http
http 192.168.215.0 255.255.255.252 inside
http 192.168.215.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic dynmap 65500 transform-set RIGHT
card crypto 10 VPN ipsec-isakmp dynamic dynmap
card crypto VPN outside interface
card crypto 10 ASA-01 set peer 221.135.138.130
card crypto 10 ASA - 01 the transform-set RIGHT value
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 65535
preshared authentication
the Encryption
sha hash
Group 2
lifetime 28800
Telnet 192.168.215.0 255.255.255.0 inside
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 5
Console timeout 0
management-access inside
VPDN group dataone request dialout pppoe
VPDN group dataone localname bb4027654187_scdrid
VPDN group dataone ppp authentication chap
VPDN username bb4027654187_scdrid password * local store
interface for identifying DHCP-client Internet customer
dhcpd dns 218.248.255.141 218.248.245.1
!
dhcpd address 192.168.215.11 - 192.168.215.254 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
Des-sha1 encryption SSL
WebVPN
allow outside
tunnel-group-list activate
internal kun group policy
kun group policy attributes
VPN - connections 8
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value split tunnel
kunchevrolet value by default-field
test P4ttSyrm33SV8TYp encrypted password username
username kunauto password bSHrKTGl8PUbvus / encrypted privilege 15
username kunauto attributes
Strategy Group-VPN-kun
Protocol-tunnel-VPN IPSec
tunnel-group vpngroup type remote access
tunnel-group vpngroup General attributes
address pool VPN_Users
Group Policy - by default-kun
tunnel-group vpngroup webvpn-attributes
the vpngroup group alias activation
vpngroup group tunnel ipsec-attributes
pre-shared key *.
type tunnel-group test remote access
tunnel-group x.x.x.x type ipsec-l2l
tunnel-group ipsec-attributes x.x.x.x
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:0d2497e1280e41ab3875e77c6b184cf8
: end
kunauto #.Hello
Looking at the configuration, there is an access list this nat exemption: -.
192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
But it is not applied in the States of nat.
Send the following command to the nat exemption to apply: -.
NAT (inside) 0 access-list sheep
Kind regards
Dinesh Moudgil
P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community
-
Unable to access the store using the proxy server.
I'm in Windows 8. I'm unable to access the app Store. He said:-"we were not able to connect to the Store.This could not have come because of a problem with the server or the connection network has expired. Please, wait a few minutes and try again.and some other applications also. I use a 1.1 proxyserver (squid) that requires basic authentication.
However I m able to use some of them as weather, maps, etc.I read solutions who suggested to temporary disable firewall and antivirus for test, I even try it but fails again.
Other suggestions where has been going for windows 8.1 upgrade level, but how can I get this update, as it is downloaded in store that I can't access. Help, please.
Hi Anand,
Your computer is connected to a domain?
Using a proxy server can allow the administrator to limit access to the Internet.
You can reduce the effect of these problems by allowing unauthenticated through your proxy server access. We recommend that you enable unauthenticated access only for connections to URLs used by each application that has a problem. Some proxy servers may suggest that you create a list of URLs (also known as the 'white list') permissions.
Please refer to the article to address these issues that relate to the use of Windows Store apps or use of Microsoft applications that are included with Windows Update or Windows 8, you can include the addresses mentioned in the article in a list of permissions ('white list') on your proxy server and enable HTTP and HTTPS access for them :
The use of proxies authenticated with Windows 8
For more information, see the article:
Using the Proxy selection and Proxy bypass lists
You can also consult the steps by Rajesh Govind, Support Engineer, may 4, 2013 and check.
Windows 8 apps not able to detect the proxy for my machine settings.
Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.
Maybe you are looking for
-
Witam, gdy loguję się iTunes Store pojawia mi się komunikat: Tego Apple ID nie używano jeszcze w sklepie iTunes Store. Smoking w Stuknij, aby się zalogować, a następnie przejrzyj information o koncie. Klikam smoking na wszystko zgadzam się I wypełnia
-
How can I restore my display of Mozilla Firefox?
Today, 26/11/2011, my Mozilla screen has completely changed and favorite eliminated, toolbar items, reduce / full page icons at the top, my pc down tool bar icons and the line of the URL at the top.
-
Tried to restore my computer to an earlier date & it keeps its back indicating it cannot restore to this date. I tried 6 different dates that are bold and assume to work. There is no info on what to do next
-
Webcam works does not in Studio 1535 with Windows 7
Hello I have a portable studio 1535, it came with the Windows Vista operating system. However later on, I had installed Windows 7 Ultimate OS. My webcam first worked with Win 7. But for some time it does not work. I downloaded the driver for the Webc
-
I can't create a new folder in one of my libraries or anywhere else?
I used to be able to create new folders, but it does not work now, and I don't know why? I am running windows 7 64 bit. I tried to click on the link to create new folder, I tried to move the file and clicking new folder doing, none of this works. I t