Unable to access Windows Management Instrumentation software. Management of Windows files may be displaced or missing.

Similar Questions

• Windows cannot copy files required for installation. The files may be damaged or missing. Error code: 0 x 80070241.

  I had a lot of trouble trying to install the 64-bit version of windows 7 Home Premium on my 64-bit vista, and my question is multi-part. If it is relevant, it's my 2nd copy of windows 7 I have tried. Initially, I had the problem of not being able to run the installation on two copies with the error "'autorun.dll' could not be found or is damaged. Error code is [0x7E]. "However, I managed to get into with my 2nd copy installation after restarting my computer. Once in Setup, I got another error that stopped the installation that says "windows not could create an installation folder. Error code is 0 x 80070017. "Again, I rebooted my computer and started the installation again, this time following installation was decently through but stopped when I got the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. "I then backed up and restarted my computer and then tried to use the option to install custom but then got the error"E:\sources\autorun.dll is not designed to run on windows or it contains an error. Try to install the program using the original media, or contact your system administrator. "coupled with the error"the file 'autorun.dll' could not be loaded or is corrupt. Error code is 0xC1"again once I restarted and tried the custom option but got the error" Windows has no load the required file WinSetup.dll.» The file is possibly corrupted. To install windows, restart the installation. Error code is 0x3E6. "I restarted my computer and tried the custom triple option more and still have the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. »

  I understand that my problem is very complex, but it seems to be built around a missing or damaged file. Thanks if you can tell what's wrong or what to do.

  Tips for solving common problems when Windows 7 won't install troubleshooting

  1. start Windows Upgrade Advisor to see if there are known issues that might affect the installation and correct them.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  2 disable any security software, including anti-virus programs and firewalls.
  3 make sure that your computer has the BIOS and latest drivers.
  4. disconnect all external devices except the keyboard and mouse before installing.
  5. If your computer/motherboard integrated video use and remove the dedicated video card.
  6. If you have a large amount of RAM (memory), try to reduce the amount of RAM installed. 1 GB if 32-bit installation, 2 GB for 64-bit, then replace RAM if the upgrade was successful.
  7. If you have downloaded Windows 7 and it burned a DVD test burn again at the slowest speed possible. It is also possible the download may have errors, you can try to download it again.

  8. check your RAM (memory) to find errors. This can take some time.
  (A) Insert the Windows 7 DVD and restart the computer.
  (B) start from the Windows 7 DVD.
  (C) select your language, and then click Next.
  (D) click on "repair your computer" then select the operating system to fix it.
  (E) click on the link of the Memory Diagnostics in the system recovery menu.
  (F) the computer will restart and your memory is checked for errors.

  9 turn off startup programs:
  (A). Click Start, type MSCONFIG in the search box and press ENTER.
  OK the authorization of user account control and password if necessary
  If you are using XP: click Start, run, and type: MSCONFIG and click OK.
  (B) on the general tab, click Selective startup.
  (C) just below the selective startup, clear the checkbox "Load Startup items".
  (D) click the Services tab, check "Hide all Microsoft Services", and then click Disable all.
  (E) click OK, and then restart the computer.
  (F) try the upgrade again.

  (NOTE: If the upgrade fails and you continue to use your rear security software, then also go back into MSCONFIG and under the general Tower XP/Vista tab, click "Normal startup", and then click OK to exit.)

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Upgrade Vista to Windows 7 error: "Windows cannot copy files required for installation. The files may be damaged or missing. Error Code Ox80070017.

  I am upgrading of Windows Vista Home Premium (32-bit) for Windows 7 Home Premium (32 bit) - but getting stopped everytime I try, I end up with a dialog box stating: "Windows cannot copy files required for installation. The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation. Error Code Ox80070017.

  What should I do to resolve this problem and allow full of Windows 7 installation? (my computer is a Compaq Presario V6000).

  Hello

  What installation media you are using?

  Method 1:

  Error 0 x 80070017 translates "CRC error" which means that the files that are copied from the disc are not making it to the hard drive with the same structure, which means that the 'original' the disk files are modified/changed/corrupted while being copied to the location of the 'destination' on your disk during Setup.

  This usually means a bad DVD, or an error reading on the DVD player.

  I suggest you follow the link and check.

  Upgrade Windows Vista to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7?T1=tab02

  Method 2:

  Temporarily disable the antivirus on the computer running software and check if you are able to install the software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  WARNING: There may be loss of data through an analysis using firewall to eliminate the virus as appropriate

  Method 3:

  I also suggest you to follow the link and check.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• Unable to access Windows Update page

  I am running XP Service Pack 3 and were unable to access the Windows Update page for a few weeks now. I get an error message saying that "Internet Explorer can not locate the page". I tried several routes to access the update page, but they all fail. Analysis of virus and malware picked up nothing. I am running Internet Explorer Ver 8.

  It turns out that the problem was software malicious. After the last post, more I tried to do at least I could do: Internet Explporer wouldn't start again, I could not copy files from one drive to the other and my backup software has been disabled. I have reinstalled Windows to solve problems. Scans of my files from backup using Quick Heal has revealed the presence of Trojan.Gen, who may have let in some other bad guys. I can now access the update site.

• Unable to access Windows Live account

  Original title: "my father is vacationing in Australia (from the United Kingdom) and cannot access its live windows account, even using web2mail, suggestions?
  I him sent a link to MSN and the actual address for the record on the page, but nothing. Help!

  Psalm of love that he asked me to help him!

  Hello

   
   
  1 did you do changes on the computer before the show?
  2. what happens when you try to access Windows Live account?
  3. you receive an error message?
  4. which version of the operating system you are using on the computer?
  5. what browser you use to access Windows Live mail?

  If you use Internet Explorer you can try to optimize Internet Explorer and check:
  How to optimize Internet Explorer
  http://support.Microsoft.com/kb/936213/no
  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  You can also view the application in the Windows Live forum to improve assistance:
  http://www.windowslivehelp.com/

• Unable to access windows update

  I can't access windows update.  When I go to Start Menu and all programs and click Windows Update, it says that it cannot display the page.  I use a 2003 Dell Dimension 4550 running Windows XP

  Error message when you try to install updates from the Windows Update Web site on a Windows XP-based computer: "Windows Update has encountered an error and cannot display the requested page.
  http://support.Microsoft.com/kb/914226

  Perhaps this may help-

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• I'm unable to access Windows Installer.

  I can't access windows installer, that nothing can, he just left work; Ive tried every thing. How can I solve this problem? Help me please

  Try to reinstall Windows Installer:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=8483

  Makoi

• After the installation of Windows XP Pro. Unable to access Windows Update

  After installing a new Windows XP Pro using my original Windows XP Pro. dish. can only access MSN explore to access my emails but cannot access or open Windows Update site. Help, please? Recently, my PC crashes and I still reinstall a fresh Wnidows XP Pro.

  I already solved my problem at hand. The main reason as to why I can't access Windows update because I had only Windows XP Pro and not the Windows Service Pack 1a. After loading the Windows Service Pack 1, I was able to access the Windows Update site. Thank you for taking the trouble to make your help.

  Yours Sincerely. Sebastian Tan

• Unable to access windows media player toolbar and also how do I check that port 1935 is not blocked?

  Original title: another question about Windows Media Player

  Some about WMP reading, apparently, there's a tab "Tools".  I don't see.  Where he could hide?  Also, I use the firewall of Windows (XP).  How can I check to see that port 1935 is not blocked?

  Hello

  To access the windows media player toolbar, press Alt, or right click on the arrows at the top of the media player.

  See the articles that contains information about firewall ports.
  How to manually open ports in Internet Connection Firewall in Windows XP
  http://support.Microsoft.com/kb/308127
  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users
  http://support.Microsoft.com/kb/875357
  Windows Firewall may block some programs to communicate on the Internet after you install Windows XP Service Pack 2
  http://support.Microsoft.com/kb/842242

• Unable to access Windows 7

  We cannot access Windows on one of the 2 user accounts on my other computer (office) - both say that the relevant password is incorrect.

  It runs Windows 7 Home Premium, for remote access is not possible.

  The problem started at startup and coincided with a behavior strange keyboard.  The "caps lock" has the effect opposite iit should I, .e when it is indexed and the indicator light is on, it is lowercase and vice versa when it is turned off.

  Sometimes it does not strike at all.

  Tried a reset of password, prepared on a laptop drive, but it does not on the desktop, no doubt because the 2 machines have different passwords.

  Thought about using the ease of the option access, with a view on the establishment of the command voice, but computer reacts to by clicking on this icon.

  Any ideas please?

  (I'll use only a last resort restore disc)

  Thank you very much for reading this - I hope someone can help!

  Annie

  Here you go:

  1. Ask a friend to burn a CD repair system for you. It takes less than five minutes through Control Panel / backup and restore.
  2. Use this CD to boot the machine into Windows Repair Mode.
  3. Open a command prompt so that you can test the keyboard. If he answers incorrectly, replace it with another keyboard, or use an external USB keyboard.
  4. In Repair Mode, use system restore to restore Windows to a point while your problems began.
  5. Create, test, and document an admin account to spare for future emergency situations.

• Unable to access windows app stores

  Hello

  I'm unable to windows connection app 'store' and play free applications namely raaga, mahojang, collection of solitaire and various applications.  No application is
  opens.  I get the error like '0x80070426' code please help
  model i3521

  Why don't the windows store download updates or applications?
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_store/why-wont-the-Windows-store-download-apps-or/6bf18b87-AE76-4C39-9ede-5923274e06d8

  Try this suggestion.

  Windows 8 Store Update 0x8024001E error code
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_cp-windows_store/Windows-8-store-update-error-code-0x8024001E/49820d2a-241e-471e-89F4-7b5440bb8abf

  The poster means Windows key + X when he mentions "Activate Windows + X and turn on the command line (Admin)".

  -What are you connected to a Local or a Microsoft Account account?

  Introduction to Windows 8: If you use a Local account or a Microsoft account?
  http://www.7tutorials.com/introducing-Windows-8-should-you-use-local-account-or-Microsoft-account

  What happens if you create and test with another Windows user?

  See if the program can diagnose any problems and fix them.

  Download and run the troubleshooter modern UI App and check.
  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  What to do if you have problems with a soft
  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Try to clear the cache of Windows Store:

  On the screen, press Windows + R key to open the Run dialog box.

  Type WSReset.exe and press ENTER.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/default.aspx/KB/929135

  He speaks among other things that the firewall does not might be a possible cause.

  FIX: Cannot install Apps from store Windows 8
  http://www.thewindowsclub.com/fix-unable-install-apps-Windows-8-store

• Information system may not collect information. Unable to access Windows Management Instrumentation software. Management of Windows files can be moved or missing.

  Information system.
  Popular management files moved or missing.

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  If it does not, then thanks for posting any repetitive error message in Event Viewer on startup (Start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work.  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• Unable to access windows update settings, message, some settings are managed by your system administrator. »

  Original title: unable to automatically update important updates.

  There is no error message when I open Control Panel > system and security > Windows Update > change settings.

  On this page, that I can't even select or choose other important updates options.

  In addition, on top of the same page, there is information highlighted: "some settings are managed by your system administrator."

  However, I have a personal laptop at home and use the laptop as administrator.

  I already tried troubleshooting, but it was useless for this problem.

  Hi Said,

  It seems that you use Windows 8. You will not be able to access the Group Policy Editor (gpedit.msc) If you use Windows 8. Group Policy Editor can have access on Windows 8 Pro/Enterprise edition of Windows 8.

  Have you tried the other suggestions contained in my previous post? security software i.e. un-installing third if installed computer and to access the windows update settings by enabling the built-in Windows administrator account.

  If you have tried the steps above, please answer us with results to help you further.

• Unable to access Windows Installer on Vista 64

  I can download but not install itunes on Vista 64.  Get the following message-

  The Windows Installer Service could not be accessed. This can occur if you are running Windows in safe

  Mode, or if Windows Installer is not installed properly. Please contact the support of aid personnel"the computer is not in safe mode and I can't install some other downloads

  Please answer in the language of "dumb" blonde, so I understand!

  Hi MsLindie,

  Thanks for choosing Microsoft answers Forums.

  What version of iTunes you trying to install?

  http://www.Microsoft.com/Windows/compatibility/details.aspx?type=software&p=iTunes&v=Apple&UID=7&pf=0&PI=0&s=iTunes&OS=32-bit

  Version of ITunes 7.6 and it is compatible with Vista 64 bit system. Assuming that you are trying to install a compatible version of iTunes, try the steps mentioned below to "Could access the Windows Installer Service" error message:

  Try to install iTunes after each of the following steps:

  1. start the Windows Installer service.

  Click Start and in the search field type Services.msc and press ENTER.

  Double-click Windows install

  Set the startup type of Windows Installer to manual.

  Click Start to start the service. If we get a message, please note that

  Click OK.

  2. try to download a newer version of the windows package install autonomous from the link below:

  http://www.Microsoft.com/DownLoads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  64-bit version of Vista: Download this file: Windows6. 0-KB942288-v2-x 64.msu

  Try to install iTunes, if the problem persists always post here so that we can provide further assistance.

  Hope this information helps.

  Kind regards
  Manasa P-Microsoft Support.

• Unable to access windows Explorer using vista

  Without any provocation, Vista has suddenly stopped allowing me to access my C: drive. I can not open as well control panel.

  Hello
   
  Do you get any error message when you try to access the C drive?
   
  I suggest you do the following and check.
   
  Step 1:
   
  First of all, appropriating the reader and then grant sharing permissions.
  
  To do this, follow these steps:
   
  a. click the drive you want to take control and then click Properties.
   
  b. click the Security tab and then click OK on the security message (if one appears).
   
  c. click Advanced and then click the owner tab.
   
  d. in the name list, click your user name, click Administrator, if you are logged in as administrator, or click the Administrators group. If you want to take ownership of the contents of the folder, select the Replace owner of subcontainers and objects of the box.
   
  e. click OK and then click Yes when you receive the following message is displayed:
   
  You are not allowed to read the contents of directory folder name. Do you want to replace the the directory permissions with permissions granting you full control?
   
  All permissions will be replaced if you click Yes.
   
  Note folder_name is the name of the folder you want to take charge.
   
  f. click OK and then reapply the permissions and security settings that you want for the folder and its contents.

  Reference: http://windows.microsoft.com/en-us/Windows-vsta/What-are-permissions
  
  Step 2:
   
  Try the following:
   
  a. click the Start button, and in the box, type find in: services.msc
   
  b. press the Enter key on your keyboard.
   
  c. the Services window should open now.
   
  d. scroll down to Software Licensing, then right-click on it and select Properties.
   
  e. under the general tab, click the Stop button.
   
  f. set the Startup Type to automatic, and then click on apply.
   
  g. click on the Start button under the service status.
   
  h. last, restart your computer.  Control Panel must now open normally.
   
  Step 3:
   
  You can also test the problem in safe mode and check if the problem persists.