Unable to choose the host when you deploy a virtual machine template

Similar Questions

• Unable to choose the Date when you try to schedule

  Hello
  I created a report with date setting where I can choose a date before to display the report, but ehrn I am planning the report that I am not able to select the date but I not see the parameter here but doen't calendar pop up... any suggestions please...

  It is an Oracle BI publisher Bug in 10.1.3.4.1... this should work in Firefox... I'm wrong? His problem in IE 7.0

• Unable to join the homegroup - when you attempt to join I get this message: cannot create a homegroup on this computer

  I tried all the suggested 'fixes' and am still unable to join. My network has worked well until I installed W7. I can create a homegroup on any computer (I have 4 on the network), but no other computers can join. All I get when you are trying to reach is "impossible to create a homegroup on this computer". It is a problen very common, judging from all the complaints I've seen on the forums. With no exaggeration, there are thousands of people are unable to use this 'easy '... home network Please don't tell me to disable my firewall or computer time sync or one of the other "fixes" that do not help.

  Hello

  Since you're so desperate, you can configure the network to the office network.

  It's a little more work than the collective dwelling, but the results are more flexible.

  -----------------------------------------

  Here you have the whole story because what Win 7 can make wise network.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Homegroup = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Network of home or work = fundamentally similar (and better) to the previous methods of theWorking Group sharing which allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  Group residential-recommended-links - http://windows.microsoft.com/en-US/windows7/HomeGroup-recommended-links
  Homegroup - frequently asked questions - http://windows.microsoft.com/en-US/windows7/HomeGroup-frequently-asked-questions
  Why can't I create a homegroup? - http://windows.microsoft.com/en-US/windows7/Why-cant-I-create-a-homegroup

  Change-a-group home-password - http://windows.microsoft.com/en-us/windows7/Change-a-homegroup-password
  How to leave a homegroup - http://windows.microsoft.com/en-US/windows7/Leave-a-homegroup
  To turn on/off and set the IPv6 components - http://support.microsoft.com/kb/929852

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  ** Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• wget timesout when you create a virtual machine

  Hello

  I'm building a Virtual Appliance using Vmware Studio. It's basically a device of Tomcat, so I provide a JDK and Tomcat package in the Build Studio process.

  When the Studio generates the VM, it tries to download the JDK and Tomcat and install both on the virtual machine. The download and install tomcat works very well, but JDK package timeout on the wget due to the size of the package. The error I get in the errorlog file-

  Connection to [address] | : [Port]... connected.
  Application of proxy sent, awaiting response... Error (Connection timed) out of reading in the headers.
  Abandon.

  How can I configure studio to allow of largest wget wait times during the construction of the machine Virtuelle/Virtual Appliance.

  Thank you.

  Most of the calls in perl code Studio wget use a 'constant' in /opt/vmware/lib/build/VADK/Constants.pm called WGET_TIMEOUT:

  void WGET_TIMEOUT {return ' - timeout 60 - tent = 1' ;}}

  You can change the timeout value in this function.

• Now need the capacity of resources using a virtual machine template

  Hi all

  Thanks in advance,

  I'm looking for a script Powercli who must give an output showing how these virtual machines can be deployed in ESXi cluster if the supplied virtual computer configuration example. @

  Sample of VM

  4 GB memory

  2 CPU

  SIV

  You could do something like that.

  Note that this is not a calculation of real slots to a cluster, which would require, by looking at the actual use of the VM largest.

  Also, note that the script uses the available threads, if the nuclei are needed the property for the CPU must be adapted.

  $vMem = 4

  $vCpu = 2

  $clusterName = "mycluster.

  $esx = get-Cluster-name $clusterName | Get-VMHost

  $tvCpu = $esx | Select @{N = 'vCPU'; E={$_. ExtensionData.Hardware.CpuInfo.NumCpuThreads}} |

  Measure-object-property vCPU-sum | Select sum - ExpandProperty

  $tvMem = $esx | Measure-object-property MemoryTotalGB-sum | Select sum - ExpandProperty

  Select - InputObject $clusterName - property @{N = "Cluster"; E={$_}},

  @{N = "CPU slots"; {E = {[Math]: Floor($tvCpu/$vCpu)}},

  @{N = "Mem slots"; {E = {[math]: Floor($tvMem/$vMem)}}

• Perl script for deploying a virtual machine template

  Am looking for a perl script for the deployment of the existing models on Vsphere virtual computer. So far, I got access to the virtual machine. I saw that there is a utility called new-vm on the powershell. I'm running a linux machine and therefore seeking an alternative to perl. Kindly give me pointers or help me with some documents.

  Thank you!

  Well, I managed to create a virtual machine from the template using the vmclone.pl script, which is part of the vmware sdk. But post creation that he's not leaving means VM State is off. I'll have to find a way to start the virtual machine as well.

• can't choose the printer when you print the HTML report

  Hello

  I lost many many hours trying to correctly print a report that consists only of a JPEG image.

  After a conversation in the forum, I have concluded that the LabVIEW includes a printing Standard reports bug, because it cannot handle properly the margins and the scale of the image. But, when using Standard reports, I could choose which printer to use.

  So, I use HTML reports smoothly to print the report, but the choice of the printer has a problem. No matter which printer is chosen by a Menu of the ring, it prints to a printer even all the time.

  Could you please give me a tip for this problem?

  I enclose the corresponding code:

  

  
  

• HFM API - class not registered in the journal when you connect from another machine

  Hello

  I'm working on the HFM API, and I'm facing a problem that occurs only when I've run them from a machine that is not one on which is installed the HFM.

  What happens is that when I try to connect from a client machine (on which are installed the HFM customers) I get an error (which I can check on the HFMErrorLogViewer) indicating

  "Class not registered".

  The error is displayed in the error XML string some details, and I see in this xml code that the customer name calling HFM made its appearance in the Svr Field (which I assume is an acronym for 'server').

  I set up the connection using the method on an instance of the SetLogonInfoSSO called HsxClient and I opened the application using the OpenApplication method, which I am passing the name of the server as a parameter also. The connection works (ie: the object is not a null instance), but then I get this error 'Class' unregistered, on the CHsvcDataLoad.cpp of file on the server.

  Any suggestion is well accepted.

  Thank you

  bidi

  Hi, thank you all for the advice.

  The problem was that simply VB6 was not properly load the dll, I added, removing and adding them once again did the trick (happy to ignore the reasons too long as it works now).

  The problem, reported on the server was in fact, as says Chandra Bhojan-Oracle: a customer a, caused by wrong loading of the DLL.

  Thank you

  bidi

• Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel. Got the unable to create the specified task

  Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel.
  Got the unable to create the specified task

  Hello

  What is the exact error message received when the problem occurs?

  Methood 1:

  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps in the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833 

  Method 2:

  You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  I suggest to put the computer in a clean boot state, and check if the problem persists, see the link:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: See step 7; Reset the computer to start as usual after troubleshooting is performed.

  Method 3:

  You can temporarily disable the security software and check if the problem occurs. Check out the following link to do the same thing:

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps! Let us know if you need more assistance.

• The behavior of business rule when you deploy a new version

  Hi Experts,

  My client is using bpm11g, they asked when you deploy a new version of bpmn process with build-in the business rule, what will happen to the existing and update of the composer?

  The old rule will be updated with the new version or will be preserved as it was? If the latter is true, when the new version will be effective?

  Best regards

  Hello

  What has to happen, is it time that you changed a BR in the composer, that a redeployment of the composite does not replace the amended administrative rules.

  You can / should export your composite of EM then you JDeveloper project reflecting changes in the BR in composer: using Oracle SOA composer with Oracle Business Rules - 11 g Release 1 (11.1.1.6.1).

  Kind regards
  Martian

• I'm unable to deselect specific fields when you set the Reset button in a form.  I can only "select all" or "deselect all". Someone at - it happen?

  I'm unable to deselect specific fields when you set the Reset button in a form.  I can only "select all" or "deselect all". Someone at - it happen?

  Yes, this is a common problem. Use the SPACEBAR to toggle individual mailboxes.

• Unable to choose the range in iMovie

  Unable to choose the range of iMovie 10.1.2

  Hi, Jeff.

  You can select a range inside a clip with your clip in the timeline, placing your cursor on it and hold the 'r' key when you drag your cursor over the clip while pressing your mouse or track pad.  The range will be described in a yellow box.

  To select a range of multiple clips, select the first clip, and then select the last element while holding down the SHIFT key.

  Best,

  -Rich

• I am unable to stop the hosts of loading process, because it takes a lot of memory

  I am unable to stop the hosts of loading process, because it takes a lot of memory

  Hello

  Some processes have to load, however, you can use these tools to check those and look for ones that
  can use a lot of memory after loading in the Manager of tasks - processes tab - CTRL + SHIFT + ESC
  Check the CPU column.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Unable to prepare the host to Vcloud Director

  Hi all

  Hope you guys can help me. I try to install the track of vcloud Director version, and I got most of this work. The problem I have now is that I cannot prepare a host. I installing the server in a cluster, I have no shared but only storage using local disks (wondering if this isn't the problem). I added my vcenter server, which is a virtual machine on a host, but I'm still unable to activate the host for its use.

  I read somewhere on the forums that it must be in maintenance mode, but it does not work. In fact if I do this, the host gets a Red Cross in the available column. On the only host I get an error saying connection refused. The other, they say just can't prepare host.

  Any help would be welcome.

  KettieKop

  You need to meet the prerequisites first, specifically to have active DRS.  For the active DRS on the Cluster of hosts in vCenter, for the DRS, you need to have more than one ESX host AND the shared storage.

  Shared storage is a requirement for vMotion (as the DRS is on your virtual machines for load balancing)

  Several hosts is necessary to allow pools of resources (you need a place to load their balance)

  Once you meet the requirements, then you should be able to view the ESX host, when you try to prepare them for vCloud Director.

  Best regards

  Jon Hemming

• Satellite 1800-354 is unable to load the driver when it is turned off during the night

  Hi could sombodu help me to solve this problem.

  My laptop wives is unable to load the driver when its been delivered overnight. It's normal runs when the drivers installed and when it was turned off for about a half hour.
  The laptop has windows xp sp2, the card is a belkin f5d7010 802.11 g and I downloaded the latest drivers for it. Thank you louis.

  Hello

  This driver is the problem for the PCMCIA port or wireless network card?

  Good bye