HFM API - class not registered in the journal when you connect from another machine

Similar Questions

• Normaliz.dll was not found, Explorer does not 'Class not registered', and the restore points are gone

  I left the room for about 20 min then when I came back I got this error

  QPService.exe - Unable to locate component
  This Application has failed to start because Normaliz.dll was not found. Re-installing the application may fix the problem.

  Then I restarted and had the same problem.  If I click 'OK' and then I get "Quickplay Resident Program has stopped working," then the error box changes the same thing but for avast and when I click on it I get "avast!" Antivirus has stopped working. "Click again and"GrooveMonitor utility has stopped working ". That's about 10 programs until next stop errors.

  The Explorer is also not work, my computer, folders, windows update, and many many other programs won't open.  Whatever this either in the Explorer tells me 'class not registered '.

  What I tried:

  • System restore - but it says that I have no restore points.  I used to have dozens, I did a lot of myself, and I don't know where they went
  • I tried to download Normaliz.dll, but when I tried to extract it to System32 (following the instructions I found on the web) he's not here, he gets another error.  So I put it on the desktop but then realized that I can't move it anywhere because I can't pull the top of my work or the Explorer.  I also tried to go into the Task Manager and do 'New task', but if I type anything this either in or click on 'Browse' then I get the same error on Normaliz.dll and then Manager tasks becomes inadmissible and accidents.
  • I tried to go into safe mode and Explorer still does not work, "New task" in the Manager tasks still does not work and I still do not have restore points
  • I tried a few other recovery tools before start and none of them has contributed to

  A lot of what I've tried has been recommended by other people when I did some research on google, but most people seem to have this problem because of IE, but I don't use IE and haven't for months.  Also solutions that seem to work for them have not worked for me.  I can't understand what caused it because I have not downloaded anything recently and it just happened when I left the computer and came back later.

  Any help would be greatly appreciated, I don't really want to destroy everything and reload windows.

  This looks like a general Windows failure since all kinds of independent programs stopped working. I would like to begin the troubleshooting process by testing your hardware from the hard drive and RAM. The machine can also be overheating. You can do it yourself or take the machine to a local professional reputable (not a type of BigComputerStore/GeekSquad of the place).

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  MS - MVP - Elephant Boy computers - don't panic!

• The requested operation is not implemented by the server when you try to access the VI Client with ESX hosts

  Hello

  We have problems with the VirtualCenter (which someone else works).  I need to access some of the virtual machines and tried to connect through the VI client to all ESX hosts.  I get this error after I give him password, username, and hostname:

  The requested operation is not implemented by the server.

  I'm sure I got this race last year.

  A reflection as to why it does not work?

  Thank you!

  Hello.

  How you launch the client?  Is it a shortcut with possibly a few settings in there?  If so, try running it without parameters.

  Good luck!

• Can not get on the internet when you use the merge with WindowsXP

  I upgraded to Fusion 2 and am running Windows XP.  Windows XP has not check when I installed it because I wasn't getting on the internet because of all the viruses that draws windows.  Now I find that I have to check Windows after 30 days.  I can't WMWare to help me after 30 days of free support (which is a bunch of Bull).  Anyway, I tried everything that is listed in this forum and through the FAQ, the s and videos and I still can't get it to work.  Can someone help me please?

  Jim

  JudgeJim wrote:

  Problem: I can not go on the internet whenever I'm on Windows.  My Mac is not a problem with online.  When I start the merge, I agree, but when I start Windows XP, it tells me this:

  Could not open/dev/vmnet8:

  No such file or directory.

  Virtual device Ethernet0 will start disconnected

  Sometimes it will say instead of vmnet8 vmnet0

  If you have found errors like that something is not right.  Have you tried to uninstall/reinstall Fusion? Note: This is not the virtual machine at the request of Fusion.

  I tried which was published for the myers40k (adding ethernet0.virtualDEV = "e1000" to the .vmx file) but that didn't fix it when I restarted merger/Windows (the text .vmx file was closed).

  This is for Windows Vista not XP and you should not apply for bugs for Vista on XP unless you know that it is normal.  So sometimes it's better to ask to be sure before try you things are written to him in a team oriented to a specific operating system.

  I also turned off and reset the network using NAT and bridge under network settings, and from the command prompt (I'm not too comfortable with the command prompt) at the command prompt, my IP address showed this: fe80::5445 etc, but it did not show my correct IPAddress, just this list of characters.

  I have broadband with a Linksys WRT54G Router. I bypassed the router and went directly to the computer. I think it must be in the software because it did not help

  If your router does not work properly, you should be able to use Bridged to network client, but without the router online, you need to set the client to use the default NAT network.  If you change the types of networks while the guest id launched, you must release/renew the IP address.  Restart then comments does this, but there are other means and until you learn what they are just restart the guest of change so that the client is not running or suspended.

  I would start by checking the .dmg against its published MD5 sum file you have downloaded VMware to make sure that it is not corrupt.

  Uninstall/reinstall Fusion and restart the Mac.

  Start merging and then the virtual machine and it if error reports after the exact wording of the message and a screenshot if needed.

  If she has any errors and you can't even access the Internet, then you need to validate the other information requested previously or there is nothing else that I can do without checking the parameters of the information requested previously.

• How to set up the MySQL database to connect from another computer?

  Hello

  I have a huge problem with that.

  What I want to do is:

  I want to create a system (in LabWindows/CVI) this will (among others) allow users to send simple messages to each other. So I want to create a MySQL database , which will be based on a server. Other computers running the system then is able to remotely connect to this database and read a certain table to see if they have new messages. I want that the client computer to connect through the LAN to the database on the server.

  But how can I do this?

  1. How to create a database that can be connected through the LAN?
  
  
  2. How my connection string should look like not on the client computer?
  
  
  3. What configurations on the client and server computers can I do?

  Any help is appreciated, and if you could suggest how can I do to reach my goal. I'm a very competent programmer, but HATE those network things.

  Thank you

  Umer

  Nothing really associated with LabWindows. Try http://dev.mysql.com/doc/refman/5.7/en/tutorial.html for the database installed and running on a server.

• Problem with the resolution when you connect to a projector

  I regularly used my laptop connected to a projector via a cable VGA for PowerPoint and video clips view in Windows Media Player.   It is automatically detected and adjusted for different sizes of screen of the laptop screen (1366 x 768) and projector (1024 x 768) and projected with success.   Recently I connected the laptop to a second monitor - also 1024 x 768 - instead, and even once, it fits perfectly.

  It suddenly stopped setting for the resolution of the projector; When I go to the resolution of the screen, the option to set the resolution of the second screen is grayed out.   No matter if I use extend or duplicate, he insists that the two screens are 1366 x 768.   This has happened with two projectors, all two used to work properly.   I also tried different VGA cables.  The end result is that the image of the projector is hurry to tray.

  I can connect fine to the second monitor via the VGA port and sometimes with different resolutions for both screens.   I can also connect to a TV via an HDMI cable.   I can't try a HDMI cable for the spotlight as it is ceiling mounted, and the other is old and is not an HDMI connection.

  I checked the drivers and they seem to be up to date.

  My laptop is a Dell Latitude running Windows 7.   The graphics card is an Intel HD Graphics 3000.   I tried many suggestions already given on these forums without success.   The real puzzle is that it was working fine and nothing I can draw has changed except that I connected on the other monitor.

  Hi Tony,.

  Thanks for the reply with the status of the issue. I'm sorry to know that the issue is still unresolved, your efforts to solve this problem are much appreciated.

  I suggest to follow the method below and check if that helps:

  Method 1: Perform a system restore.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  System restore WARNING: when you use the system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Method 2: Uninstall all hidden devices:

  Step 1: See the article below to activate the devices hidden in Device Manager.

  Look at a hidden devices

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553955 (v = vs. 85) .aspx

  Step 2: After you enable hidden devices, remove devices from Device Manager.

  1. press start.

  2. type device manager in the start search box.

  3. Select Device Manager in the search result.

  4 uninstall everything that are grey also uninstall the drivers to display completely.
  5 restart the computer and install the drivers to view the manufacturer's Web site.

  Hope this information helps, just reply to the State of the question to get help.

  Hi Rizwan

  Unfortunately, I do not have a restore point old enough until the problem occurred.   I have not found any that was relevant in hidden devices, but in normal Device Manager mode when I clicked on "monitor" it opened a "Generic PnP" entry even when there was no extra monitor or projector fixed.   When an additional monitor has been attached, there were two of these entries.   I disabled them both, and I found that I can now adjust the resolution of a second monitor to a different setting of the laptop screen.

  Thanks for your help.

  Tony

• Unable to choose the host when you deploy a virtual machine template

  Good Morning-

  I feel that the answer to this is with myself; However, I would ask - I try to deploy a virtual machine model for test purposes and I want the virtual machine must be created on a specific host.  When I start the Wizard "deploy the virtual machine of model", I am only able to select the cluster and not a specific host.   Is it possible for me to be able to select the host to which the virtual machine will be deployed without disabling DRS?

  Thank you very much in advance for the help.

  Steve

  What happens if you right click on the host that you want to deploy on the virtual machine to and select deploy from model - but don't forget if you have a DRS activated with anything other that Manuel DRS will select the host on which the virtual machine starts on and it would not be that you deply to--

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Virtual Drive do not show in the BIOS after you connect Virtual Media to the iDRAC

  Hello

  I had a problem with iDRAC to install from an ISO OS image to a M600 server.

  I have measurements are:

  1. connect to the iDRAC, System-> Console-> launch Viewer

  2. in iDRACView, Media-> CD Media-> ISO Image-> [select .iso image and OS]-> Connect-> closed

  After restarting the server, "boot sequence" in the shown BIOS

  CD-ROM USB device (not installed)
  USB Floppy device (not installed)
  Hard drive C:
  Embedded NIc 1 MBA v4.4.4 Slot 0400

  Manaul Dell boot sequence should show Virtual CD etc but I have everything installed not.

  Cannot start server from the image but the "current status" in Virtual Media to iDRAC is 'connected.

  My server is a Dell M600 and iDRAC IPMI version is 2.0 and the firmware version is 1.60 (Build 3).  Help, please.  Thank you

  RDG,

  Certainly an unusual problem.  A few questions to better understand the issue.

  1st. A it worked correctly at any time, or is - this first enter this part of the functionality of the iDRAC?

  2 have you tried different media in order to ensure that the issue is not isolated just for this disc?

  What is particularly unusual as connected virtual media lists, it's clearly is not resolve as expected.

• PC will not open .jpg to MAC when you export from Lightroom

  When I export a photo from lightroom on my Mac on my external hardrive, they are very good. I can then open it with mac, etc. When I plug in my external hardrive to my PC and open the pictures, some of them only are visible. It looks like 2 different collections of photos. One is. _IMG_xxxx.jpg and the other is_IMG_xxxx.jpg. the. _IMG_xxxx.jpg will open on pc. When I check the properties of the photos that some are newer once I exported from lightroom and some of them are those of an earlier date, and yet I exported just as the exact photo on MAC, Hung my outside up to PC and checked. Did I miss something in my export options? I can export or "save for web" in photoshop (as a jpg file) and have no problems with opening the photos on a PC. Why is lightroom sends me in trouble? Thank you!

  FAT32 should work OK for this purpose I was just curious to know if it was something different.

  I think that what happens is that Lightroom is not correctly check if the image already exists in the folder. Remove the images from your PC or your Mac after you transfer? You might want to try to do only for the Mac (which will remove the dot files too). You can also reset warnings dialogs in Lightroom, which is done in the preferences-> general section.

• How to get the event when you click Add another button in a table.

  Hello
  How to recognize the event in processFormRequest click on the button Add another line of the footer of a table?
  
  Suppose if the ID is anotherRow (I mean ID of the button to add another line of the footer)
  
  If I give if (pageContext.getParameter ("anotherRow")! = null)... its not recognizing the event that is returning null only...
  
  I want to perform certain actions when the user clicks Add another line of footer. Please let me know the details of how identify when add another line is clicked...
  
  Thank you
  Srikanth

  Hello

  If you have only one table with add_row_button, and then copy the following code works perfectly

  If (tableBean.getName () .equals (pageContext.getParameter (SOURCE_PARAM)))
  (& ADD_ROWS_EVENT.equals (pageContext.getParameter (EVENT_PARAM)))
  {
  ...
  }

  tableBean is the Handle for your advanced table, hope, it will help you.

  Kind regards
  Out Sharma

• How to protect the files on the computer when you connect to a WiFi hotspot?

  If I have internet access in the coffee-shop, they provide Wi - Fi service,

  Referring to a following linked picture, I have always to deselect file and print sharing for my network setting the option,

  It will be safe enough protect anyone taking any file in Notepad?

  Thanks in advance for your suggestions

  http://www.terryscomputertips.com/images/file-and-printer-sharing_2.jpg

  Original title: how to protect your files by free Wi Fi?

  Hi oem7110a,

  Thanks for posting your query in the Microsoft Community. It seems that you have a problem with the protection of your files in a wireless hotspot. We can get this fixed number by systematically. It can be frustrating for you. But, don't worry, we're here to help.

  Method-

  I would have you look at the article-

  A Wi - Fi connection: 8 tips for working safely wireless hot spots

  http://www.Microsoft.com/atwork/remotely/hotspots.aspx#fBid=X51tFoD9rGf

  We know if you need help. We will be happy to help you.

  Thank you.

• No characters on the paper when you print from Word or Excel

  When printing from Word and Excel - printer goes through all the steps and sounds but no ink on the page. Print test and other programs non - SM page print very well. Worked fine before (maybe 2-3 months I have used Office but print very well before)
  Windows XP and Office 2003

  Hello Allen_99,

  Thanks for visiting the site of the community of Microsoft Windows XP.  The question you have posted is related to Office and would be better suited to the office community.  Click HERE to find a community that will provide the support you want.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Updated in the database when you go to another page

  When the user has entered data, he can click on a link. Send this link to another web site.
  My wish would be that when they click that link two actions will be performed:
  

  I close this issue and I create another topic.

• Class not registered. MovieMaker error message. Also clip-player shake trying to start, but never does. Is - this memory?

  Always 'class not registered' is the answer to why MovieMaker cannot import as many files. I finally realized that if I have all the "Windows"associated files with QuickTime (which I do often because QuickTime Pro has been my editor that works, but I wish you MovieMaker to work because he has a different user interface that doesn't have a QuickTime Pro and it also looks like a very good program)

  Well of course MovieMaker will say that he has not "registered class. But then I associate any Windows, and I use Windows Media Player on Windows media files (it is a ball game all nother as to why PhotoStory3 will not identify ANYTHING either import in Windows Media Player and its unbearable playlists because (sorry but really... Windows how much a control freak should we be?)) Windows Media Player is a great product but the playlists and psycho how they are and how they control much else if you don't have them good... I want to say that I classify even not my media as Playlists insist!  He drives me crazy that they will sort not even by directory!  OK OK... Sorry... but these are really statements and probably a reason why people eventually switch to Mac. Windows Media Player wants to control how PhotoStory3 works and opens to your media... he wants to sort that you want to associate with it in a way that is so incredibly frustrating and it moves all the time, so that you don't know what's left in an archive it seems always continually come up with... UGH)

  Yes, back to Movie Maker. Sorry... but it turns out that Movie Maker also does not seem to recognize any "class" of files that it needs to import easily. My WMV files and *.wma and.. *.avi. but he says: "class not registered". And believe me, that I am registered in each file that appears to be a DLL "library", which I guess MovieMaker can make reference. I'm out of my element when it comes to talk about these 'libraries' and controls, but I signed repeatedly 5 main DLLs in Movie Maker as well as the outside System32 DLL which seem to have an impact on it.

  I have trouble while registering the 3 final files into MovieMaker that all look the same. I keep holding out that maybe this will be the trick to get MovieMaker to work. At LEAST for the mounting clip player to operate. Does anyone know where this video player is native of...... It is also associated with Windows Media Player. And as I'm probably suspect... what I find the most space on my computer or go buy more memory (there is no place to install more unless I probably get a new computer) to get this video player to work.

  So the *.dlls 3 in MovieMaker can't register are:

  C:\WINDOWS\system32\regsvr32.exe C:\Program Movie Maker\wmm2eres.dll
  C:\WINDOWS\system32\regsvr32.exe C:\Program Movie Maker\wmm2res2.dll
  C:\Program Movie Maker\wmm2res.dll C:\WINDOWS\system32\regsvr32.exe

  AND that's just ONE of the many ways that I tried to save them. But they come with a 'success'

  And finally the codecs associated with MovieMaker. I even went into this program identification codec under DirectX diagnosis... "Softella Filter Manager" or something like that... and I poured through it and find all instances of the MovieMaker filter DLL and I have reUpped its relevance in each case his link with some codec. I don't know exactly what I'm saying here but in the list of codecs and filters... so many things related or listed with the MovieMaker wmm2filt.dll - they were designated never "use".  And I clicked on them which has arisen again. All that that means I don't know but I thought she would at least give feedback in the program and tell him... It is used.

  Sorry for my long rant. I obviously do not include programming that much, but I tour and research about and I was out with these two programs (Windows MovieMaker 2.1 and 3.1 PhotoStory) for a month or more... trying to make them work.

  Any tips would be appreciated if you bother to do so through my rants.
  Thank you

  Hello Brianeclus,

  Thank you for your message.  With regard to the registration of the dll in your system.  Please, try the method explained in the link below.
  http://www.windowsmoviemakers.NET/forums/ShowPost.aspx?PostID=26233
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot get signal when you connect the TV to HDMI port.

  * Original title: HDMI Signal

  Hello. My nam is Kieu. I have a problem and and we hope you guys can helo me. I just bought a Gateway desktop all-in-one computer and tried to connect it to the TV via the HDMI port, but I could not get signal on my TV. Help, please.
  Thank you very much

  Hi David,

  Thanks for posting your query in Microsoft Community Forum!

  According to the description of the problem, it seems that you are unable to get the signal when you connect the TV to HDMI port.

  I will certainly help you with this issue.

  Here are some steps that you can try in order to solve the problem.

  Step 1. First you need a video cable to make the physical connection. For a better image quality, you need to connect the computer to the TV using standard VGA ports or via DVI to HDMI Cable provided your TV supports these ports.

  Step 2. Open thedisplay settings' ' in your Vista computer and Activate the output to the TV screen. You can reflect the content of your computer on the TV or extend the display as a double screen control.

  Step 3 Pick up your TV remote and switch to "External inputs" in the menu. You need to change the value by default "Video 1" to a different selection which may be "HDMI 1" or "video 2" depending on how you made the connection. "

  Important: Make sure you connect the cable to the TV before turning on the computer, because sometimes it may not recognize the external display.

  You may also change the resolution of your TV screen using the display settings in your panel of control remains the image may appear distorted.

  For more information, see the article.

  Connect your computer to a TV

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  If anything in my post is not clear or if you have any questions on Windows, feel free to let us know. It is our pleasure to be of service.