Unable to connect/configure PSC 2020 using MAX

Similar Questions

• Unable to connect to the internet using Firefox or IE

  Unable to connect to the internet using Firefox or IE. I can ping other pc on my network home and can ping websites such as google.com. Other PCs on the home network connect without problems. Nothing has changed in the network or the configuration of IE/Firefox. The only change is that I have installed the update to Vista SP1

  Hello

  Stack TCP/IP Winsock settings in Vista has probably been corrupted.

  Journal to this page and scroll down, there are instructions for Vista.

  http://support.Microsoft.com/kb/811259

  Jack, MVP-Networking. EZLAN.NET

• RCU error: unable to connect to the database using the contact information provided

  Hello

  I am not able to connect to the database using the remote control 11.1.1.10.1 to create patterns. I ran the UCR even a week ago and I managed to connect. My database and listener are up and running and the host and the credentials are correct. I don't know where is the problem. Any help will be appreciated. Attaching the screenshot for reference.

  

  Concerning

  Oumaima

  Hi Handal

  Thanks for the reply. Looks like someone had blocked the firewall settings, so I was unable to connect to the database using the port.

  Thank you

  Oumaima

• Unable to connect wireless, "ACS user exceeded max sessions" users

  Some corporate users are unable to connect to the wireless company.

  On the WLC, I get the following logs:

  Authentication failure AAA for UserName:dto029 user Type: USER WLAN

  The GBA, I get the error:

  Authentic doesn't have a default group for ACS user exceeded max sessions (by default) 192.168.47.46 DTO029......

  That means "user ACS exceeded max Sessions? How can I solve this problem? Connection problem faces few users, while others are able to connect.

  Corporate SSID, Session Timeout & Client Exclusion is not enabled. The WLC version is 7.0.98.0 and the version of the CSA 4.2.0.124

  The problem is solved the ACS is restarted. Is there a permanent solution?

  Thanks in advance.

  Hello

  the error means that the users belong to the ACS Group (or the user themselves) has a "max session" setting, as described here:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/Overvw.html#wp826493

  .. and the user exceeds this limit.

  ACS can indeed limit the number of concurrent sessions for the same user name; This counter is based on the RADIUS account management information received from the AAA client: the session counter is increased when receiving a 'Start' accounting and it is decreased when you receive a "Stop" on accounting package.

  ACS for a reason if any don't receive an Acct-Stop, it won't reduce the number of session, so it may happen that your users exceed the max concurrent sessions allowed indeed.

  You can check the active sessions on the "users" ACS report:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/LgsRpts.html#wp680304

  If you restart ACS, this info is reset, so everything will work again, as you say; as an alternative, you can also use the options 'Purge logged in users' on the logged users page, but it would be wiser to really solve this problem by checking if... :

  -do you really need the config of max sessions? Otherwise, you can simply disable this on users/groups configuration

  -If you need for this limitation and the problem is related to the session that overlap, which means that the WLC should not send the Acct-Stop because there is always a session active and a new one is created at the same time, you can consider increasing the number of maximum session.

  HTH,

  Federico

  --

  If this answers your question please mark the question as "answered" and write it down, so other users can easily find it.

• Satellite A500 - 03P: unable to connect to the WLan using Win 7 + event message

  Hi all

  I recently bought the Satellite A500 with the offer included Windows7 while he was available late October 09.

  So I had the Toshibe DVD for the upgrade and followed the steps and Visa home premium upgrade to Windows 7. Now I have two questions.

  (1) I get a system event Notification after start, talk to me about the system event log. The full message is below.

  Unable to connect to a windows service
  Windows could not connect to the System Event Notification service. This problem prevents limited users to logon to the system. As an administrator, you can view the system event log to see why the service failed

  (2) I was able to use this laptop for the internet before the upgrade, both via a USB wireless drive as well to the office via a DSL modem.
  Now I can't access the internet after the upgarde of Windows 7!

  For example the Optus dial-up box pop up appears commandeLorsque I click on 'connect', it does not connect.

  Can anyone help please?

  Thank you
  C I

  Hey Buddy,

  (1) did you check the Configuration of the Service for this service? The Boot System Event Notification Service type must always be set to automatic. This service is absolutely necessary for Windows and shouldn't t be disabled or set to manual startup type.
  Check it!

  (2) to be honest I never heard on the internet BEFORE, but normally, it should also be possible to access the Internet with Windows 7.
  Make sure that the WLAN or LAN card is installed properly and check the TCP/IP settings. If you are missing some driver you can get on the page of Toshiba.

• Satellite L300D: Unable to connect to a network using WIFI

  I can't connect to a network using WIFI on my new laptop (which seems to be fairly widespread)
  When I followed the advice of the Knowledge Base, he said I should see an unknown device icon when I click on the other peripheral icon instead there is an icon of Ethernet controller with a yellow label on it

  Any help would be accepted with gratitude,

  Kind regards
  David

  Hello!

  What section of the Knowledge Base do you mean?

  However, try to update the driver. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Sometimes, I read in the forum that a BIOS solve the problem too.

  Additionally, make sure that the wireless is turned on with the power button on the computer laptop and FN + F8.

  Good bye

• Equium L300 unable to connect to my router using wireless

  I have a laptop Equium L300 and can't connect to my router using the wireless option.

  I am told that the wireless feature is disabled on my pc but the switch on the front is activated.

  Can connect with the cable is the wireless.

  Anyone know what this could be?

  Try pressing Fn + F8, only the activated Wifi become?

  In Device Manager, the wireless device is reported to work ok?

  Try a BIOS update as well.

• Unable to connect to the network using the super pole, Virgin media

  Original title: Wireless Connection, it connects, but you cannot use the internet laptop, acer 7520on

  Hi tried to connect portable to new super Virgin Media hub he connected but could not get on the internet all I tried sometimes hidden I have a laptop on the same system is not a problem I do following Phil

  Hello

  Do you have an error message when you try to connect?

  Perform the steps in the link and check.

  The Super hub troubleshooting blank media

  Hope this information helps.

• Unable to connect to the internet using a Wi - Fi connection

  original title: wireless connection problem

  My son can connect to the internet with his phone and the ps3, but no more with his laptop

  He was able to connect before on laptop. No matter what he tries, he can't re - connect his laptop to the internet... It has windows 7
  Thank you

  Hi mikecampbell,

  If you are still unable to connect to the internet with a wireless and wired connection, make sure first that the wireless card is turned on. On most laptops, there is a button in the front of the laptop. If you are still unable to connect to the internet, follow the steps described in this document.

• Unable to connect to the Internet using Auntie Photon, it shows the device has been disconnected or is not available when clicking on the button connect

  Original title: Auntie Photon

  Hi all

  I use Auntie Photon on windows platform 8, and it shows the device has been disconnected or is not available when clicking on the button connect. For this reason, I am not able to use internet on my Laptop.I also in contact with the customer service and they told me to take the laptop to any engineer to solve this problem.

  Help, please.

  Hi Varun,

  Thanks for posting on Microsoft Community. I understand that you are not able to connect to the Internet using the dongle Auntie Photon. Let us work together as a team and try to get this fixed number.

  Please help me with the following information related to this issue:

  1. You have installed the required software on your computer which came with Auntie Photon?
  2. Do you see an error or exclamation point in Device Manager when you connect Auntie Photon dongle? See the steps to check:
  • Press Windows Key + X.
  • Select Device Manager.
  • Check if there is no error or exclamation point under Auntie Photon.

  This problem can occur if device drivers are not get detected or due to missing/corrupt device drivers.

  Please follow the steps mentioned below:

  Method 1: Run the hardware troubleshooter

  The convenience store is an automated tool that checks the hardware attached to the computer for known problems and provides details on how to correct them. Follow these steps to run the troubleshooter.

  1. Press Windows key + W on the keyboard.
  2. Type the Troubleshooting in the search bar and press Enter.
  3. In the Troubleshooting window, click show all in the left pane.
  4. Click hardware and devices.
  5. Click right on material and devices and and select run as administrator.
  6. Click Next and follow the on-screen instructions to complete the process troubleshooting.

  If the troubleshooter could not find and fix the problem, I would suggest trying the following method and check.

  Method 2:

  Note: Make sure that the Auntie Photon dongle is plugged.

  Step 1: You can try to uninstall and reinstall the drivers of Auntie Photon and check. Follow these steps:

  1. Press Windows key + X on the screen.
  2. Select Device Manager.
  3. Expand the network adapter and right click on driver and select Uninstall.
  4. Restart the computer.
  5. Windows will automatically load the drivers.

  Step 2:

  You can also try to launch the Windows updates and install all the updates that are available including the driver in option and the updates of the firmware.

  Windows Update: frequently asked Questions

  You can also get in touch with Auntie Support and check the updates to driver for Windows 8.

  Please answer us on the State of the question to help you further.

• Satellite L300D-10U - unable to connect to the internet using LAN and Win XP

  Hi all

  I had a very big problem with my card.
  I can t connect to the internet.
  I searched the forum but without any determination :(

  I did everything. I have checked ipconfig nothing, check the mode safe mode with local network nothing.
  Someone said too
  "(1) once the Ethernet is connected, power of the DSL Modem. Cycle." ("Some Modem picks up the MAC ADDRESS of the network card on where it was previously connected and restarting it redétecte this new")

  How to disable the modem?
  And another question: can someone tell me what works of LAN drivers in Sat L300D-10U on XP?
  I put t even know that :(

  Help me

  Hello

  The Satellite L300D-10U belongs to the series of PSLC0E and it supports the Realtek LAN card.
  LAN driver can be found on the page of Realtek.

  You ask how to disable the modem? I think you mean how to reset modem DSL
  Well, usually your modem should support an ON / OFF button simply turn it off and then turn it back on.

  If you are unable to access the internet then you should first check if your modem is properly configured and that the right data ISP (internet service provider) was used.

  Sorry, but that's all I can say right now I think you should just check your modem settings, make sure that the NIC is properly recognized and connect the model of the laptop using a LAN cable.

  All that s

• Unable to connect to cRIO (OK in MAX)

  Hello

  I am exploiting my cRIO from a different computer than usual (after the usual hard drive has failed) and having connection problems. The two are running LabVIEW 2013 and Max I can see LabVIEW 13.0.0 in real-time as well as NOR-RIO 13.0 and NOR-RIO IO Scan 13.0 are all installed. MAX said that the cRIO is connected and running.

  However, in my project, I can't connect to the cRIO properly (right-click, 'Connect' does nothing, and the "LED" on the icon stays dark). If I open a new VI on the cRIO, he can run and read data from the modules, but has no function or the controls available in the menus. In the Project Explorer, the RIO appears with the message "features not available."

  I've attached a screenshot of diagnosis to explain the situation.

  Thanks in advance for your advice.

  See you soon,.

  Elizabeth

  It would be useful to see what software is installed on your local computer, rather than on the cRIO. Most probably, you have not the Toolbox in real time on the PC.

• Unable to connect to the internet using Ethernet

  I have a Mac mini as I try to connect via Ethernet cable to a modem Comcast Arris TG862. I was connected via Wifi without problem (with the exception of the slower speeds). I know that the Ethernet ports on the back of the modem seem to work, since I can listen to my TV, etc. In settings > network Ethernet shows as green and connected and gives me an IP address, but as soon as I turn off Wifi no web page doesn't load.

  What I am doing wrong? I thought that it would just connect. On the Ethernet port lights, which I think means data transfer. Otherwise, I need to tell Firefox or Chrome to turn to the Ethernet connection?

  Thank you!

  The default configuration is to have the WiFi over Ethernet in the Service order.

  The order must be set such that the (desired) primary service is at the top of the list and the backup service is below.

  If you look at the order of service when it is connected to the network, the higher is the provision of access Internet one (or at least, he thinks Yes).

  To set the order, click on the menu of the machine and choose the order of Service. Move Ethernet to the top of the list. This should make it primary unless he loses the connection.

  However, it must move up Ethernet and provide a connection when you have turned off the WiFi. When you disable WiFi on the Mac, the Ethernet connection move to the top of the list and show a green connection?

• Satellite L735-10V - unable to connect to the internet using ethernet

  I have problems connecting to the network via ethernet.
  connect the ethernet cable and the laptop connects to the net, but after a few seconds it disconnects.
  I don't know what the problem is.

  I tried to disable TCP/IPv6 and it doesn't work.
  Please can someone help me here.

  It's just killed me.

  It is not easy to say what may be the problem.
  Have you noticed the same thing using WIFI?

• Satellite L20: Unable to connect to the internet using mobilephone & dongle BT Mecer

  Hi all

  Mine is an edition of Satellite L20.
  I recently installed XP Professional Service Pack 3. I connect to internet using my USB cable with my Sony Ericsson C702 (use the phone as a modem).

  Since there is no bluetooth built into my laptop.
  So, I bought a Mecer bluetooth dongle. I installed the bluetooth software. Can I transfer data between my laptop and my mobile phone via bluetooth.

  Now the problem is I can not connect to the internet via bluetooth. I opened my bluetooth IVT software and paired my laptop and mobile computer. Then I opened my Sony ericsson suit and looked for my mobile finds, my mobile and still once he pairs with my cell phone and when he tries to connect with my mobile phone its shows "device cannot be detected, try again." I tried to reconnect, not matching and pairing it several times, but no use.

  I also found one thing, just after it displays "Device cannot be detected," a pop-up message "SEPCSuite.exe has encountered a problem and closes the window with options."
  1) send to microsoft
  Including 2) send.

  What can we do to fix this problem?

  No idea...?

  See the website of your provider of Bluetooth software to help. This forum is for Toshiba Software only.