Unable to connect laptop to a wireless printer

Similar Questions

• Connect laptop to a wireless printer wireless

  I don't know how to get my wireless printer to recognize and accept orders to print from my wireless laptop.  I have a netgear router and my thin deaktop computer functions. I don't have the procedure. Thank you.

  Install the printer software.  Follow their instructions.
  
  --
  Martin Stanley
  MS - MVP
  --
  How to ask Questions the Smart way
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

• Unable to connect to the network wireless printer.

  says the printer cannot be contacted over the network. Said also the printer is not enabled when it is turned on.

  What printer brand and model?

  What version and the service pack of Windows?

  Check the led or LCD screen on the printer to confirm that the wireless status is OK (the printer can be powered on with the wireless turned off).

  Depending on your printer, print a network information page or use the LCD Panel to determine the IP address of your printer.  Make a note of it.

  Open devices and printers, click the printer icon, select properties and click on the Ports tab.  If necessary, click and drag on the vertical line between the 'Port' and 'Description' in the 'Port' wider column header line (you can't see the vertical line in the example below, but this is where it is) to do.  Is the IP address in the selected line (corresponding to your printer) identical to the IP address that the printer has reported?  Click 'Cancel' to close the screen.

  

• Printer Hp6700: unable to connect to the router wireless D - Link DI-514 when SSID Broadcast is set to no.

  HP6700 printer: unable to connect to the router wireless D - Link DI-514 when the router Broadcast SSID is set to no. My MAC laptop and HP laptop both work with the set SSID on no. If I change the router Wireless SSID Broadcast is YES, then the printer HP6700 can connect to the wireless router. I set up the printer it saying that the SSID and password have been, the same as both of my laptops, but it connects ever, unless I have change the router to broadcast the SSID. Help!

  Have you tried to update the firmware on the DI-514?

  You can also try to set a static IP address on the printer, and then assign the printer to the list of DHCP static in the interface of the router.
  To give a static IP address to your printer:
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.
  Now, stop the router and printer, start the router, wait, and then start printing.

  After that you remove and re - add the printer to your Mac.

  Show support by clicking on the blue Kudos star in the post that solved your problem. Doing so will help the other members of the forum their solutions also.

• Cannot connect my HP 6520 wireless printer

  I have this printer for less then a month, and although the scan is slow and printing is well it worked fine. I have recently moved to the University and I can't connect to the internet.

  Everytime I try, it says ' unable to connect. Unsupported authentication or encryption type '. I can connect to my iPhone and the Macbook Pro perfectly fine without any problems, but I can't seem to connect to the printer.

  I really need to work, given that I paid a lot for it and it does not only have less than a month.

  Can someone help me please? I have no information on the router, since it is the wifi at the University.

  Well do you have an Ethernet connection in your room?

  Options: Choose only one.

  1. connect the printer to your computer via the USB cable from the printer (not just a USB cable... a printer USB Cable).  Connect wireless to your network of schools.  Recommended.

  2. If you have an Ethernet connection in your room, you can connect to your computer via an Ethernet cable and you can now use the printers Direct wireless for wireless printing.

  3. switch back and forth between your schools network and wireless SSID Direct printers to print wireless.   This option would be less convenient.

• Connect laptop computer Win7 wireless all in one single premium 309g

  For some reason when I try to connect my Win7 laptop to my home network and the premium all in a 309g printer which is connected wireless to my network home and trying to get the printer to print on my laptop, in the add printer box, it turns out the printer 2 times. The first time as Photosmart premium 309g and there still the same name of the printer, but with "HPOB437F" in the name of the printer. most later showing a green check mark. The two printer icons look like 2 different model printers. Also when I click on my computer with drives C, D, G, then Z to the printer. When I got this installed printer before ever stood there.

  Any help in setting up my installation would be appreciated.

  A may be associated with the simple operation of the system driver and the other related to the complete HP software.

  Delete the one with less settings, I guess.

• Unable to connect to my router wireless - Satellite A200

  Hello

  Can someone help me to connect my laptop to my wireless router? He used to work, but note accept the security code that my other pc is running without problems. The laptop connects to other unsecured sites and is ok hard wired to the router. I tried re enstating the router on the laptop but not joy.

  Anyone got any ideas I can try?

  Thank you

  Hello

  Are you sure you used the security code? Maybe do you a misspelling, so I would try to check it again.

  In addition if you use DHCP on your router, your laptop get an IP address?

  By the way: Toshiba laptop you have and you did update the driver WLAN?

• Satellite Pro 6100: unable to connect to internet via wireless network

  Have had some problems with the audio device Yamaha for another thread, which now seems to be resolved. Thank you!

  However, do not know why, but now unable to connect to the internet via a wireless network, although the router works well as another computer in the House is connected wireless.

  When you check the available wireless networks it comes up with "no wireless networks were found in range, make sure that your computer's wireless switch is on.
  Where to check it, can anyone help?

  Thank you

  On the left side, there is WLAN switch. Make sure that the switch is in on IT. After doing this using FN + F8 key combination and activate WLAN device.

  After having done that, you should be able to see the WLAN networks available in your area.

• I am unable to connect to my router wirelessly to parents. I tried to reset the modem and the router and it still does not work.

  Presented labtop parents and can connect via ethernet, but still cannot connect to the wireless router. Ive rebooted both the modem and the router and ive also unplugged the power source. Help, please...

  original title: unable to connect to the wireless router?

  Hi Brandon,.

  What operating system do you use? (Windows 7, Vista, XP?)
  You receive any type of error message when you try to connect?
  What exactly happens when you try to connect?
  You receive an internet connection when you connect with an Ethernet cable?
  There are a few good troubleshooting in this thread. I suggest to look to see if it helps at all:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/unable-to-connect-to-a-wireless-network-Windows-7/734ecdef-99fb-4862-b63a-04cfa448cc06

• Printer maybe Setup connects through USB and wireless printing? or either one or the other?

  I would like to connect my printer to the since my MAC using a USB cable and also be able to use the wireless printing functionality without having to reconfigure my printer.  Is this possible?

  I have a Photosmart 7520

  Hello

  All my tests were using Windows, but I think we can do it for Windows why not Mac. It takes config of the printer as a wireless printer (IE to connect to a network) and install drivers, or applications on OTHER computers and mobile devices.

  Kind regards.

• Unable to connect to get the wireless event ID: 8002 task category: AcmConnection; Event ID: 12013, event ID: 11006

  Hello

  I have a Dell Latitude E6440 Win 7 Enterprise 64 running on a domain. It will connect to an unsecured network, and he can see the secure network in the list when I click the icon for the wireless connection on the system tray. When I go on manage wireless networks, the secure network is not displayed (and so I can not delete the network to try to add new). Normally, we would add the network protected here. I click Add, type the name in the correct syntax, add the necessary information (2/WPA-Enterprise TKIP or EAS) and click Next, it returns immediately with "an unexpected error has occurred." The same thing happens when I hit the connection in the list of available networks that appears when I open system tray icon: he said that it was impossible to connect, when I hit the Troubleshoot, it is said that he could not identify the problem. The event log shows error below. I could not find any resolution here or elsewhere who respond to the fact that I can connect to networks unsecured wireless, but unsecured wireless networks.

  Other notable troubleshooting procedures:

  • Uninstalled/Reinstalled with the latest wireless adapter driver
  • Other laptops may have access to the same secure wireless network
  • The first configuration error automatic WLAN in the event log is event ID: 12013, attempting authentication 802. 1 x. Then the event ID: 11006; declaring "explicit Eap received to fail". After a few days of alternating every 3 errors, they started only error event ID 8002.

  Log name: Microsoft-Windows-WLAN-AutoConfig/Operational
  Source: Microsoft-Windows - autoconfiguration WLAN Service
  Date: 04/06/2014 11:53:55
  Event ID: 8002
  Task category: AcmConnection
  Level: error
  Key words: (512)
  User: SYSTEM
  Computer: [ComputerName. AREA]
  Description:
  Autoconfiguration WLAN service cannot connect to a wireless network.
  Network adapter: Intel Centrino Advanced - N 6235 Interface GUID: {f27af762-dff8-4927-84e0-7f4ade30dcc9}
  Connection mode: connect to a network secure without a profile profile name: [NAME of the SECURE NETWORK]
  SSID: SECURE NETWORK [SSID]
  Type BSS: Infrastructure
  Reason for the failure: the specific network is not available.

  The event XML:

  8002

  0

  2

  24010

  191

  0 x 8000000000000200

  1475

  Microsoft-Windows-WLAN-AutoConfig/Operational

  [COMPUTERNAME. AREA]

  {F27AF762-DFF8-4927-84E0-7F4ADE30DCC9}

  Intel Centrino Advanced-N 6235

  Connect to a network without a profile

  [NAME OF THE SECURE NETWORK]

  [NAME OF THE SECURE NETWORK]

  Infrastructure

  The specific network is not available.

  163851

  0 x 6

  Hello

  The question you posted would be better suited in the TechNet Forums. Large networks, domains and windowsserver questions version are supported via TechNet so best to check with Experts there. I would recommend posting your query in the TechNet Forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?filter=AllTypes&sort=lastpostdesc&brandIgnore=true

  Hope this information is useful.

• Satellite A300 - 12K unable to connect to the ADSL wireless modem

  My Satellite A300 - 12K suddenly cannot connect to a dsl wireless modem... There are no changes made to the parameters of
  However it connects to a modem that is not encrypted.

  Any idea what the parameters might have changed?

  Hello

  Why you n t reset the modem and check the settings?
  Configure encryption of the modem settings and encryption settings of the WLan card.
  Check if you are using the right key and change it if necessary.

  Sorry but there is no magic answer for you question, we must check everything and if necessary you must reconfigure everything!

• Unable to connect laptop to TV via HDMI cable

  Original title: unable to connect

  I recently put HP G-62 - b51SE.I tried to connect to my HDMI TV using the HDMI cable but nothing works. Is there a way I can connect. What settings should I do in order to make the display appear on television. I have windows 7 ultimate.

  Hi Lovemicrosoft,

  1. first you need a video cable to make the physical connection. For a better image quality, you must connect to the computer to the TV using standard VGA ports or via DVI to HDMI cable provided your TV supports these ports.

  2. open the "display settings" in your Vista computer and activate the output to the TV screen. You can reflect the content of your computer on the TV or extend the display as a double screen control.

  3. pick up your TV remote and switch to "External inputs" in the menu. You need to change the value by default "Video 1" to a different selection which may be "HDMI 1" or "video 2" depending on how you made the connection. "

  Important: Make sure you connect the cable to the TV before turning on the computer, because sometimes it may not recognize the external display.

  You may also change the resolution of your TV screen using the display settings in your panel of control remains the image may appear distorted.

  Link to view:

  What should I know before adding TV tuners to use with Windows Media Center?

  http://Windows.Microsoft.com/en-us/Windows7/what-should-I-know-before-adding-TV-tuners-to-use-with-Windows-Media-Center

• I'm trying to connect my Canon MG5200 wireless printer to my new HP laptop with Windows 7 Home Premium.

  The printer is connected to my office and is a part of my network. However, I tried both the printer installation and troubleshooting (which is what he says, he need next to the State of the printer on the network) and none of the options worked. Suggest me you think I try?

  You do that?

  "Program to load the CD supplied with the printer. This CD should be installed in each computer or laptop that needs access to the printer. Once the CD program is installed, the router connected to the main computer will allow each computer or laptop to locate the signal of the printer. »

• Connect a laptop to my wireless printer

  Hello

  I read in the nets, but not found something to help my particular problem.  I just bought a photosmart C4480 and wireless upgrade kit.  Installed successfully with the adapter plugged PC tomy.  We want to allow the laptop for my son to use my printer and I found some intsructions, which suggests that the card not on my PC.  However, on the installation of the drivers on the top of the Tower, he wanted the adapter plug (which we did).  Print the two PCs, but we must exchange the adapter between the machines to make them work.  Of course, this is not normal?

  Any suggestions?

  Hello

  Success!  It helps when you have all the info.  Thanks a lot for your help!