Connect a laptop to my wireless printer
Hello
I read in the nets, but not found something to help my particular problem. I just bought a photosmart C4480 and wireless upgrade kit. Installed successfully with the adapter plugged PC tomy. We want to allow the laptop for my son to use my printer and I found some intsructions, which suggests that the card not on my PC. However, on the installation of the drivers on the top of the Tower, he wanted the adapter plug (which we did). Print the two PCs, but we must exchange the adapter between the machines to make them work. Of course, this is not normal?
Any suggestions?
Hello
Success! It helps when you have all the info. Thanks a lot for your help!
Tags: HP Printers
Similar Questions
-
Unable to connect XP laptop to my wireless network. Diagnotics says 'error trying to validate the Winsock base providers' couldn't get cable or Internet.
Hello
Try the methods below to solve the problem.
Method 1:
How to reset the Protocol Internet (TCP/IP)
http://support.Microsoft.com/kb/299357Method 2:
How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista
http://support.Microsoft.com/kb/811259
To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
-
Connect laptop to a wireless printer wireless
I don't know how to get my wireless printer to recognize and accept orders to print from my wireless laptop. I have a netgear router and my thin deaktop computer functions. I don't have the procedure. Thank you.
Install the printer software. Follow their instructions.
--
Martin Stanley
MS - MVP
--
How to ask Questions the Smart way
http://www.CatB.org/~ESR/FAQs/smart-questions.html -
Cannot connect Windows XP to the wireless printer.
WINDOWS XP PRINTER WI - FI CONNECTION
I have Windows XP Media Center Service Pack 3 OS that worked a HP Photosmart Plus B209 a - m with a USB cable. Since I just bought a new laptop (Windows 7 Professonal OS) I decided to create a home network with a router Cradlepoint MBR 900. The two laptops (XP and 7 OSs) were connected to the internet via the router with no problems. Windows 7 Pro OS laptop is connected wireless to the printer Photosmart Plus, I had implemented as confiquiration wireless the printer first. But the failure of the attempt to get the OS Windows XP Media Center to connect to the wireless printer. During the installation process to connect the printer to the XP system wireless it asked me to choose which printer I wanted to connect to. The Photosmart Plus printer was selected and visible, then I clicked Next. Shortly after, a small screen appeared stating the "serscan.sys" file could not be found and I have to insert a Windows XP Pro CD to get the file or run the installer of this file. This issue has occurred both when I tried to install it with the CD provided by HP and when I tried installing the HP download website. All I have is a recovery for Windows XP disk provided with the laptop and not a CD Windows XP Pro. What should I do to fix this? Thanks, LonnieThanks, that was fast. Please, let me make sure I have this correct. First of all, I have two recovery disks provided with the computer, with Windows XP Media Edition and one for the drivers. I should not use either of these disks, right? If I had the previous correct answer then let me ask the following question; When looking to borrow the disc should be Windows XP Media Edition or can I borrow any disk of Windows XP? Kim Merci for your help continues. Lonnie
Lonnie,
Before the hunting around for friends who might have a CD, do the following research. For each of them, make sure that you have checked the search options in the 'Advanced Options' to
- Search system folders
- Search for files and hidden folders
- Search subfolders
Search your entire hard drive and both CDs you have to serscan. Do not include the .sys at the end of the file name.
Search for Driver.cab. Report of the Office (s). On your hard disk, you should find one or both
- C:\Windows\i386\Driver.cab
- C:\Windows\Driver Cache\i386\driver.cab
You can also find these files on the "recovery disk".
Report what you find, including locations of found nothing. It is possible (but I don't think likely) you will find a file named serscan.sy_ - If Yes, include this information in your results.
Or, if you want to ignore all this, you can download serscan.sys since my SkyDrive-->
The file should go to C:\Windows\system32\dllcache (a hidden directory) and probably in C:\Windows\system32 (I do not use this file, if it is not in my system32 folder).
Or you can just save it to your desktop and "direct the Setup" it there (if you do this, check more later to confirm that he got into C:\Windows\system32\dllcache and if not, put a copy).
-
Unable to connect to the Dell 966 wireless printer.
Original title: unable to connect to my wireless printer
My laptop is a dell running windows vista and I have a Dell 966 printer all-in-one. I can't have printer to pick up the signal from my laptop wireless. Im not to share the printer also. All the indicators are on my laptop and printer. I also have no ip and not the gateway ip address.
Hi gus,.
Than you for your message.
"I can't printer to pick up the signal from my laptop wireless."
You use a wireless router to share your network?
"I also have no ip and not the gateway ip address."
Is - with reference to the computer or the printer?
"The question is my cell phone and my printer can not communicate. My printer does not have an IP address.
You try to get the laptop to deliver the IP address of the laptop?
I propose to move the printer closer to the network router to isolate the interference problems.
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
HP 2540: Connection iPad2 at the HP wireless printer
Can I connect iPad 2 to hp 2540 via Att hotspot using AirPrint myfi? I thought that the iPad 2 could connect directly to an HP e-printer anyway
Hello
Another option if you encounter problems, make him print the password is disable password protection. You will be able to do in using of frontage on the printer and find the menu option that relates live wireless. When you find it, clear apssword protection.
Once the logic of direct apssword wireless is disabled you should be mean to connect the printer directly without the need of a password.
-
Unable to connect my laptop XP Prof on printer Officejet J6450 AIO usb (in network)
Due to some problems of scanning, I have reinstalled my AIO on my USB port of office instead of the old Dell (Windows 7-64) ethernet link. However, I'm unable to connect from my laptop with XP Pro. I downloaded and installed the latest version of the software of full J6450 and can do a test print, but cannot access the printer through the center of Solution, that's why the scanner and other features are not available from the laptop. Also, is anyone know hence the hp software file is extracted to so I can re - run the Setup file?
The IOA has a w/l button, so I'll try an instalation w/l on the laptop.
Hello Tracer_C
Thanks for responding. The error was 'the scan cannot be performed because another program or computer uses... ". "The w/l installation was successful, after that several unsuccessful attempts. (I accept the blame for it). After 2 or 3 tries, I noticed the obligation to connect the printer to the USB port of the laptop to install the drivers. Apres_que the drivers have been installed the software it reset the network, and it does not connect until I plugged in the printer on the desktop).
I thought I could do a no-w/l installation, but it is just as well, because I don't often print the laptop anyway, so I can keep the w/l off on the router function until I need to print from the laptop.
I found the installation for Xp folder: C:\Documens and Settings\Temp\7Z***.tmp\Setup.exe Settings\nom of utilisateur\Local.
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
ALL CHECKS that I KNOW OF DO s: idea
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
ALL CHECKS that I KNOW OF DO s: idea
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hey answerstoernest
· try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer
You can also track information to try to solve your problems of printer below
read the printer correct that information the slot microsoft, including the 'fix - it' and the other links here
Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
and read this microsoft tutorial too
Introduction
This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.
How to use this tutorial
For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Walter, the time zone traveller
-
Unable to connect laptop to a wireless printer
Hello:
We have a laptop HP with Windows 7 Home Premium 64-bit.
and a HP all-in-One Photosmart Premium C309g printer/copier/scanner.
It was all together upwards and work wireless very well for a few years.
Our wireless router went wrong.
We replaced our DSL modem and the wrong Linksys router with a modem router Netgear.
We have established between the bridge and the laptop's wireless connectivity.
We are unable to establish connectivity between the laptop and the printer wireless.
Printing works fine via a wired connection.
Is this connectivity issue... cannot connect wireless...
a network configuration problem & sharing Windows... or... is there something that needs to be
configured in the gateway provided by AT & T?
Thank you
DaleB
So, you configure your laptop to recognize the bridge and he knows the SSID and password, but you have set up your printer for the same SSID and password? Until you do, it will NEVER work wireless...
You will need the manual of the printer as it must be installed at the end of the printer...
-
Problems connecting a laptop to a wireless network.
I have a laptop among many others that does not connect to a wireless network. simple DSL line and router. First, I tried to fix the conection and received the message "cannot renew the IP address. I ran diagnostics and hardware seems OK. Diagnostic software says authentication failed. I went to CMD and tried ipconfig/renew, it did not help. Should not the router because other machines are accessing OK. What's next?
Yes, I just used the system restore feature and took care of him this way... do not know what the user did to corrupt the password/authentication...thanks I apreciate the help!
-
How to connect wired computer to the wireless printer.
I spent hours on the phone with a representative of brother yesterday to try and get my DCP-L2540DW communicate with my computer without the computer being on wi - fi, without success. We already all this up and running, but we had to get a new router and configured Time Warner Cable technician differently things. I tried to re-creation of the network on the printer, but that did not fix the problem.
I tried following all the steps that I can find online and the brother of troubleshooting, but I had no luck with either. Thanks in advance for any help
Lets try to connect the printer using the LAN cable connection and see if you can get your PC to connect to this first. Disable all wireless on the printer and the whole upward for the connection of LAN cable.
FYI: If the ISP's modem has a built-in router, it is best to fill the modem. Having 2 routers on the same line can cause connection problems: link >http://www.practicallynetworked.com/networking/fixing_double_nat.htm and http://computer.howstuffworks.com/nat.htm if the modem cannot be filled then see if the modem has a DMZ option and enter the IP address of the router gets the modem and put it in the DMZ modems. Disable any WiFi modem from the ISP and filters such as firewalls and other. Make sure that the printer and the PC is connected to the EA router and not the ISP's modem.
-
I can't connect my laptop to my wireless router.
connection to the wireless router
Please, I have problem in connecting my second laptop to wireless belkin n router. In the past, I have had no problem my old laptop second connection for the wireless, but when the laptop was damaged, I had to replace it with a computer hp laptop window 7. But this new laptop is unable to connect to the radio. When I installed the particular beklin on the portable installation cd it asked me to connect the usb on the laptop adapter as indicated on the manual. By computer scientist in maplin and Comet, I was told that I don't have a usb adapter, since it is a new laptop. Please could help me? Thank you.
Contact Belkin support.
-
Is it possible to connect the HP Photosmart C4780 Wireless printer without USB cable?
Hello
My family and I recently moved and while moving, something inevitably get lost or left for account. I am fighting to get this printer and will so I don't have to bother people at the front desk at school to print my documents for me. I have lost/misplaced both the HP Photosmart C4780 printer software disk and the USB cable. I have no idea where these things are and have not found them within two months, we've been in the new House.
I solved the issue of the loss of the installation disk by downloading it from the HP site. My problem is now getting beyond the USB connection and get the currently installed software. Because I run on a MacBook Pro, it always tells me that I need the USB key to continue the installation. I'm on a Verizon Wireless router, and I even tried to find the printer on my wireless network with no luck.
Help, please!
Thank you.
It's the type of cable you will need (ignore the color of the cable, the ends are the important part).
Have a new router is not a problem, but remember the SSID and password wireless exactly, otherwise it will not work (if you decide to try Method 1). It's a bit like "trick" your printer into thinking that your new router is your old a long enough to configure the network settings for the new (desired).
-
I have a 6 month old Toshiba, laptop Windows 7 64 bit. The printer is a printer wireless Brother Multi-Function.
Hi DeniseGarner,
1. have you made changes on the computer recently?
2. what happens when you try to print from the Internet?
3. If you are using Internet Explorer, then what version of Internet Explorer is installed on the computer? To determine which version of Internet Explorer that you are currently using, start by opening a browser in Internet Explorer. Then select 'Help' - > then 'about Internet Explorer '. This will then show what version you use. http://support.Microsoft.com/kb/969393
4. do you get any error code or message?
If you use Internet Explorer, then proceed as follows.
Method1.
I suggest you try the steps in this article.
You receive a script error and are unable to print from Internet Explorer 9: http://support.microsoft.com/kb/2652062
Method 2.
I can't print or preview before printing a Web page in Internet Explorer
http://support.Microsoft.com/kb/973479I hope this helps.
-
How can I connect my laptop to the wireless internet?
Ive recently bought a new laptop and im eager to connect to wireless internet but I can't remember the password for my name wireless as my old laptop just used to connect to it and the password has been saved there. So the name appears just and I can't connect to it im wondering if I need to create a new name wireless and if so do I need to remove the one to do this and how?
Follow these instructions...
http://www.Microsoft.com/athome/organization/wirelesssetup.aspx#fBid=18RAS7QwckB
Maybe you are looking for
-
MacBook Pro does not detect monitor Dell through CDM
Guys, a few weeks ago I asked a question if bolt of lightning 2 CDM-compatible monitors. You guys lied. I got the Dell P2715Q today and I have connected to the computer with the USB cable I had Plug and cable thunderbolt. I did everything, but my Mac
-
Using an IP191 monitor, have random horizontal stripes on the screen - have no problems with other browsers. also no problem with FF on the other PCs on the family. These "streaks" seem to be the domain of the high frequency analysis; they can be eli
-
Laptop HP 15-r014tx: signal audio dts
I have installed audio drivers, still, I am not able to see dts audio control panel in the control panel. earlier, it was, but could not open, so I uninstalled the driver and reinstalled but now the same setting is not available.
-
Hello I have a HP Pavilion dv6t-6000 CTO Quad Edition Entertainment Notebook PC that I bought a year ago. I searched exhaustively PC's maximum memory media. Two manuals, which I downloaded from HP site got two different answers. It said a maximum of
-
More hp c4780 prints fotografías desde mi pc
Patrick C 4780 photosmart hp MI no me already print fotos desde put imagenes en mi pc, puedo hacer para mi problema did what? Gracias