Unable to connect local CD/DVD drive (error VMware)

Similar Questions

• Add/Remove components error and DVD driver error: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Original title: Add/Remove components error and DVD driver error

  Yesterday, I removed several components of windows to attempt to clean my cpu. After the reboot, I noticed that my DVD drive disappeared. I tried to update the driver but told me I have the most updated version, I uninstalled and reinstalled the drive, but I still get the same error. Under Driver Details, it shows that I have a lot of drivers for my Phillips DVD player. However, the status of the device is the following: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. I've done the troubleshooting, and the two options has not fixed the problem.

  Then I tried to add windows components that I removed, thinking maybe that was the problem. However, when I try to add them, I get an error message that says: 'Setup cannot copy the file zClientm.ex_' it shows the location of this file as being in windows/i386, and of course, the file is located in this folder. So when I go to browse to locate the file, I find and click on it to open it, but I keep getting the same error message that the file is not found and Setup cannot continue.

  I realize that this problem seems very rare and weird, but any help at all would be appreciated. Thank you.

  Hello
   
   
  Code 39: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Explanation of error codes generated by the Device Manager in Windows XP Professional http://support.Microsoft.com/kb/310123

   

   

  Method 1.
  Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then automatically solves the problems that he finds and offers additional resources if the problem is not resolved. Click run now in the article below.

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

   

   

  Method 2.
  Also, try the methods listed in the section below and check.
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• on startup, I get the message, unable to connect to all network drives

  at startup I get message (unable to connect to all network drives) I use windows 7, intel i3, 64-bit and ie9.

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Method 1: Perform the steps from the link below and see if it helps.

  Programs may be unable to access some network locations after you turn on user account control in Windows Vista or in Windows 7

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  Method 2: Click on the link below and see if it solves the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Networking/cannot-reconnect-all-network-drives/5c5a4492-1634-4479-91f9-b4d2763b31d2

  Hope this information helps.

• Unable to connect to the Remote Agent of VMware Converter

  I'm trying to V2V an our old infrastructure of VMware 2.5.x our vSphere infrastructure W2K Server.

  I've done several servers of the old infrastructure without problem.

  On this particular server, however, fails with the error "Unable to connect to the Remote Agent of VMware Converter"

  The journal of the points below on the $ IFC share.

  [2011-01-14 12:32:40.008 'P2V' 4788 info] [ClientConnection, 101] Connection to IPC$ on 10.101.0.171 like 10.101.0.171\administrator
  [2011-01-14 12:33:10.086 'P2V' 4788 info] [, 0] SMB Manager: connection error for share [\\10.101.0.171\IPC$]: 1792

  [2011-01-14 12:33:10.086 'P2V' 4788 WARNING] [ClientConnection, 115] Unable to connect to IPC$ on 10.101.0.171. Reason: Error unspecified in the mechanism of the remote execution
  [2011-01-14 12:33:10.086 'P2V' 4788 info] [ClientConnection, 119] Renounce the attempt to connect to IPC$ on 10.101.0.171
  [2011-01-14 'P2V' 4788 error 12:33:10.086] [task, 295] Task failed: P2VError REMOTE_UFA_FIREWALLED (10.101.0.171)
  [2011-01-14 12:33:10.086 'P2V' 4788 verbose] [task, 339] The transition of InProgress asked congestive
  [2011-01-14 12:33:10.086 'P2V' 4788 verbose] [task, 388] Successful passage

  Any suggestions for a solution would be appreciated.

  It looks like maybe the firewall on the server. Install the converter directly on the machine you want to convert, or temporarily disable the firewall.

• connection to a local CD/DVD drive freezes

  Hello!

  I have seen this problem several times in the last days: trying to connect my local DVD drive via vSphere Client with a virtual machine, the CD/DVD button says 'connection... '. "but never actually finalizes the process. I think that yesterday I was able to solve this problem by turning off the virtual machine, remove the device configuration and adding a new. Now, even if I delete the device, the power on the virtual machine (i.e. the CD/DVD button is grayed out because there is no device), turning off the virtual computer and add a new drive, and then turn it on again, the reader is always displayed as "connecting...". »

  Is this a known issue? And how to get out of this situation?

  As this thread is always updated from time to time, I would like to answer my own question:

  The problem occurs, when there is more than one instance of vSphere Client running at the same time. I do it often, as I have more than one Server vCenter to manage. Even if all customers of vSphere are closed, check that no process failed or suspended "VpxClient.exe" are around. Kill, if necessary. Restart a single new vSphere Client, and remote media will be connected.

  From vSphere Client as an administrator is not necessary. The fact that it is running under a different user name is also probably the reason why that works.

• Unable to connect, 'Local only' for a few days now

  Approximately every 2 months home my computer Windows Vista unable to connect to my network.  I get the Local only and in the area of the network it is stuck on "identification" and will never stop.  I rebooted, reset the router and the modem, etc..   This usually lasts for days then it pops up right back on and it's fine.  Any ideas I can do if I don't have to wait days for it to reconnect?   Thank you.

  > Ken - Support Engineer: you can try another card network (wired) to this computer?
  I contacted my OEM. The Ethernet chip is based on the motherboard and cannot be replaced without replacing the motherboard.

  My OEM suggested to reinstall the drivers or a system restore before SP2 or wipe the laptop and re - install Windows.

  I tried reinstalling the drivers, nothing works. When I have more time, I am considering a system restore before SP2. If I wipe Windows I'll probably install XP Pro instead. I am completely sick of Blista.

  Another difference I found between Networking in Safe Mode and Normal Mode is the failure of the (spldr) security processor loader driver; It fails in the former mode, but is OK in this last mode. I sent the error report to Microsoft via the reports of problem and Solutions for your reading.

• Unable to connect to the host.   Error: The specified version is not found

  vmrun-t esx h https://192.168.1.123/SDK u root Pei password list

  Unable to connect to the host.

  Error: The specified version is not found

  Any ideas why it does not work?  It is run on a Windows XP workstation.  The target server is on the local network and running ESXi 4.1.  The vmRun version is 7.1.2 and is installed with Workstation 7.1.2.

  I also tried Ubuntu 10.04 with vmRun from a Workstation 7.1.2 installation.  There, he also fails with the same error.

  Note that ESXi 4.1 is used to test installation is not allowed and is running in demo mode.  Management of the vSphere client works without any problem the same Windows XP workstation.

  Any help would be appreciated.  Thank you.

  You must install the full package of VIX by http://communities.vmware.com/community/developer/downloads. It contains only components to manage the workstation. Please note that I had to install in the VIX 1.10.1 order then Workstation 7.1.2 to get both to work on my Windows 7 computer.

• "Unable to connect to the Skype server" error on samsung wave 723

  I got Skype Lite (or the Java thing, whatever we call it - does not allow calls - only CAT) on my Samsung Wave 723 for more than six months. Earlier this week he suddenly disconnected me and when I tried to log in again it showed this error "Unable to connect to the server of Skype." almost immediately after, I started signing in. I tried to reset the settings in Skype, my phone settings, I took out the battery and reset even WiFi. Then I tried to connect with a few other WiFis - still the same error. My friend has the same version of Skype Lite on his cell phone, and it works very well and without errors.

  Anyone know how to fix this error? It is urgent, please.

  Solved the problem on my phone. I just had to add the area code to my phone number in the connection menu.

  @yousef8824: I downloaded my Skype Java one of those ages of links it is a. not useful at this time.

• Satellite L300-1BW - 19 on CD/DVD drive error code

  Hello people, Satellite L300-1BW my wife lost her DVD player - manager of material properties gives the following error:

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  I tried to uninstall the DVD driver, then reboot to let her re - install, but it still comes back with the same defect :-(

  Any ideas anyone? ?:|

  Hello!

  Try to delete upper filters and lower, as in this Knowledge Base article Microsoft has offered:
  http://support.Microsoft.com/kb/314060

  (1) run Regedit (start > run > Regedit)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  Good bye

• Unable to connect to the Internet, receive error message: DEBUGER END WIRE.

  Original title: unable to connect to the Internet

  Hello

  I am using Dell inspiron 1525 with Win.Vista Home Premium 32 bit

  When I connect to internet I displays message DEBUGER CANCEL THREAD

  There is no driver problem

  Someone help me

  I thank & regard

  Satish Baker

  Hi Sissi,

   

  1. you are using a wired or wireless?

  2. do you and changes to the network card or manually change all the settings?

  3 when was the last time it worked?

  4. are you tring to set up internet connection in windows vista for the first time?

  Please follow the links below to solve the problem.

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

   

  See also this: the problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

   

  I hope this helps!

• Unable to connect [Local account]?

  OK, then I hit the Windows key + C then that in the modern Photo App and it has...

  "You are not connected right now."

  No problem, other than the app gives you no. CLUE on WHERE or HOW connect you.

  So the question is... WHERE or HOW a sign in the Photo App?

  Flickr works correctly and automatically connects me to see all my photos.

  Modern App Mail retrieves all of my emails, which makes me assume
  that I am connected.

  Skydrive in notification area icon said: SkyDrive-Up to date.

  So why doesn't App State Photo, "you are not connected right now?"

  https://8hdmqq.SN2.livefilestore.com/y1pK4ukl6A8RB8TS8isYVdmSXcx4vfBL3FVdOd9C9lnJFakt2iZd5delP78114lXjjzoq1whgTeFXWPEbcCVGAn-OJrM6uKZQ-3/can ' t%20sign%20in.png?psid=1

  Click on the unable to connect error below provides the tile of SkyDrive to see what it details.

• Unable to connect to the Internet, the error message "Cisco AnyConnect VPN agent service is not responding. Please restart this application after a minute"

  Original title: unable to connect to the internet

  Whenever I connect to my computer and get it on my desk, it goes on to say that Cisco AnyConnect VPN Service not available. How can I fix? I am not connected to the internet and I can't connect to the internet as well. He said also Cisco AnyConnect VPN service agent is not an answer. Please restart this application after a minute. Also, I can't use my firewall for some reason, if I try to allow its loading and the greenbar's going that far - then stops and says that there is an error. I forgot where I tried to activate.

  Oh thanks for the help but I fix it myself. I just did a system restore to a month before

• Unable to connect to my laptop computer error "the user profile service has no logon. User profile cannot be loaded. "

  Original title: unable to connect to my laptop

  I tried to connect my laptop this morning and received this message "the user profile service has no logon. User profile cannot be loaded. Currently, I run in safe mode to get here. My os is windows 8, I have no restore point for system restore was released. I changed the password but when not even a joy also came not preinstalled os so no disc to any kind either. I'm no computer whizz but I don't have a little and follow instructions if any of you guys have any suggestions

  http://www.eightforums.com/user-accounts-family-safety/6084-any-fixes-user-profile-can-t-loaded-Windows-8-a.html

  The manufacturer of the system should give you a method to restore the system to factory settings as well.  Maybe the press of a button to start, or you were supposed to make the media or something similar.  Call NOW and ask if you can get a CD/DVD restore media.  Get, even if it costs a bit.  Better to get it so that you don't need that when you do.

  Windows 8/8.1 also restore, refresh and restore capabilities.  It's good for some things, but methods of restoration/recovery of the manufacturer are the best long term for several reasons.

• Unable to connect to the server Essbase (error #1051293)

  Hello

  Using Essbase Integration Services Consol, I created a template OLAP, and then click OLAP Metaoutline and even checked. But when I tried to load the members and the data I just had an error that is "unable to connect to the Essbase server: Localhost (error #1051293).

  If any of you have solution for this issue, so kindly help me.

  Saami

  Do you know who your security Admin? Or at least you have access to Shared service URL?

  In LDAP, type your user ID and you see your start-up. Add the new app to your user ID, and you define.

  Essbase Administration Services to help online

• Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

  Original title: Unable to connect to the wireless network

  Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

  I should add that I have tried the solutions of the previous forum on this topic, and none worked.

  Hi Marilynnla,

  Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

  Read this article and follow the steps. Lets see if it helps in any way.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2 (Works for Windows XP SP3 as well)