Unable to connect my system to the internet after reinstalling my OS.
NEED HELP IN OBTAINING MY COMPUTER CONNECTED TO THE INTERNET
I recently had to reinstall my computer Dell Dimension 4600 (Windows XP with service pack 1) because the computer crashed I lost all my files. I worked with a Dell representative for instructions. Yesterday we finished the installation. But now I can't connect to the internet. I tried myself to troubleshooting, but since I'm not well informed on the computer back and donts of installation, nothing worked for me. Should I upgrade to windows? Help, what do I do?
Hello Akobash
Most likely, you have not installed the drivers for your network card. Here is the link for the drivers for your system. You will need to select the arrow next to 'Network' drop-down list, and then select the network appropriate for your system driver. You probably need to register this driver on a flash drive or other portable media. Once you've saved it you can then insert the support in your Dell Dimension 4600, access media, then run the driver installation program. Follow the instructions on the screen to complete the installation, and if necessary, you may need to restart. After that the driver installation network and you can get online I suggest you only install other drivers for your system from the link provided. If you have any questions please let us know. Thank you.
Tags: Windows
Similar Questions
-
Download never stops
When I make a wireless connection (or even a dial-up access) to the Internet, the download starts. I didn't ask this, and waited to see if it stops. It never seems to. Even after 500 MB has been transmitted. I tried selective startup with all this that deleted except what is necessary to recognize the wireless device. That does not fix the problem.
I turned on the firewall and Norton Antivirus.
Is it possible to trace communications to tell where it comes from? Or any other suggestions on how to fix this?
Thanks again - this time to Jack.
I agree that I'm probably lacks enough understanding to solve this problem in a forum like this.
PRTG Network Monitor myself to work, but can't find anything in which seems to follow the link which causes the continuous download. Very probably, I didn't know how to use it properly - it came with a pretty important manual which I didn't read entirely, and what I've read, I found to be of a technical level that is beyond me. It seemed to be a good piece of software and I enjoyed a chance to make a free download...
I looked your site ezlan and this was helpful. I did start > run > msconfig and experimented with turning off of a variety of elements of start-up and also on the Services tab most of the non-Microsoft services. Now I disabled all startup items, and on the Services tab I have disabled all non Microsoft services except Norton anti-virus and NovaCore SDK (which is needed to establish the connection of Virgin Mobile). I left all on Microsoft services. Needless to say that this configuration did not stop the download.
But here's a brilliant note: I stopped the download by 1) conclusion on TCPview the process ID (PID) that has been accumulating the ongoing increase received bytes, 2) with this PID, I went to Process Explorer and double clicked on the process that had this PID. Then, on the Services tab, I read on each of the 25 - odd services that were running and a guess and stopped the BITS service. Presto! Download stopped. This service seems to take care of the updates for the operating system and other things, and I guess that's a rather crude way to fix things. I see that in the start screen, I can uncheck the BITS service, and maybe I should do this to keep it from start to start.
So you can see that I have a fix of some kind, although I know I need to occasionally cancel for the Microsoft updates. I will continue to operate in selective startup mode and you uncheck the BITS service in the section of the Service of the start window.
At the risk of taking more time, I ask a few questions (hopefully) final:
Offer a clue as to what kind of problem I have my 'fix'?
How much harm I do by removing the BITS service?
Thank you very much.
Dave
-
I am unable to connect my system using the microsoft account.
Separated from this thread.
Hello
Unable to connect to my system using microsoft account IAM. I forgot the password, so went online and reset it, try to connect with the new password still showing the error message "your pc is offline. Please sign in with the last password used on this C. P'?
no idea about my old password and unable to connect with the new password too.
What is the fix for this?
Hi Deepika,
Thanks for posting your query on Microsoft Community forum.
I would be grateful if you can provide us with the following information to help us better understand the issue.
- Do you have any active account except your Microsoft account?
- Are able to connect to your e-mail you used as Microsoft account using the new password on the web?
I suggest you refer to the following articles in order to retrieve your forgotten password.
What to do if you forget your Windows password
http://Windows.Microsoft.com/en-us/Windows/what-do-forget-Windows-password#1TC=Windows-8
Note: When you reinstall Windows, make sure that you must back up all data.
Return to your Microsoft account if it has been compromised
http://Windows.Microsoft.com/en-us/Windows-8/get-back-blocked-hacked-account
Hope this information is useful.
Thank you.
-
computer does not connect to the internet after reinstalling XP SP2 wit
After that the computer we reinstalled windows XP with SP2. The operating system loaded fine, but don't can't get the computer to connect to the internet. Went through all the steps suggested even check the Service Manager to ensure that the appropriate services are started. Any help would be appreciated.
Hi DamonBrigham,-What exactly happens when you connect to the Internet? You get an error message or error code? If Yes, indicate the same.-Do you have a cable or a wireless connection?If this is a wired connection, try starting mode safe mode with network and check if you can connect to the Internet successfully.Networking Mode safe mode starts Windows in mode safe mode and includes the network drivers and services needed to access the Internet or other computers on your network.
See this link for instructions on the boot safe mode with networking:
-
Cannot connect to Internet after reinstalling vista.
* - Original title - OUR Dell laptop came with the vista operating system
OUR Dell laptop came with the vista operating system. Myhusband dislike vista. Exp of Windows has been installed on our laptop. recently, virus disabled the jury mouse & key. I reinstalled vista. How can I connect to the internet. I get an error msg. the underlying ethernet connectivity required for the broadband connection was not found. pls install activate the ethernet adapter.
Fran
Hi Joseph,.
I see that you can not connect to the Internet after reinstalling vista. I'll help you with this problem.
1. What is the brand and model of the computer?
2 have you installed all necessary drivers after installing vista?
3. do you format the disk hard while re - install vista?
4. who is the ISP?
I suggest you to refer to this article and check if that helps.
Wired and wireless network problems: http://windows.microsoft.com/en-US/windows/network-connection-problem-help#network-problems=windows-vista&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1
Let us know if you need assistance with any windows problem. We will be happy to help you.
-
Original title: connection problem
I'm unable to access my computer (windows 8) with my microsoft account. The password works for the connection to outlook on the internet, but not the computer.
The message I get when trying to connect is simply that I cannot connect you at this time and that I should follow a link to reset the password - what I've done without result. The computer is connected to the internet.
Hello
Thanks for posting your query on the Microsoft Community.
With the publication of the description, I understand that you are unable to access your computer using Microsoft password account on the machine Windows 8. I will certainly help you get this problem.
I would be grateful if you could help me with more information:
1. Since when you are facing this problem?
2. What is the exact error you receive by accessing the computer?
I would say to you follow the suggestions provided by Cliff_N responded on 7 December 2012 in the below thread Microsoft:
Important information: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.
Note: When updating, the applications you have installed Web sites and DVDS is deleted. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.
For more information, you can consult the Microsoft article.
What to do if you forget your Windows password
http://Windows.Microsoft.com/en-us/Windows/what-do-forget-Windows-password#1TC=Windows-8
Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.
-
Unable to connect to the internet after installing Windows 8 Pro
I installed Windows 8 Pro on my laptop, but I can't connect to the Internet. When I diagnose the problem, it can not find the problem. I use a computer dell laptop. The notification on the corner of the Office says I'm connected. I use a wifi that works fine as I can connect my iPad with it. Can anyone help?
Hello
Thanks for posting your question in the Microsoft Community.
I understand that you can not connect to the Internet after the installation of Windows 8 Pro operating systems. Correct me if I'm wrong.
I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:
1. you receive an error code or message?
2. what web browser do you use?
3. don't you try to connect to a wired connection?
4. What is the Dell laptop model number?
Please follow the methods and mark the question below:
Method 1:
Step 1:
Start the computer in safe mode with network and check if the problem persists by following the link below.
Start settings for Windows (including safe mode):
http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode
If the problem does not persists in Mode safe mode with networking, and then perform a clean boot.
Step 2:
You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.
To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.
How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8:
http://support.Microsoft.com/kb/929135Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.
Method 2:
Follow the steps in the link below.
Wireless and wired network problems:
Method 3:
Follow the steps described in the links below.
Why can't I connect to the Internet? :
http://Windows.Microsoft.com/en-us/Windows-8/cant-connect-to-Internet
A Wi - Fi & networking:
http://Windows.Microsoft.com/en-us/Windows-8/connect-Internet#1TC=T1
For reference:
Connect to the Internet:
http://Windows.Microsoft.com/en-us/Windows-8/connect-to-the-Internet
Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.
-
Unable to connect to the internet after installing updates
Original title: I can't access the internet after running the latest updates! Please notify.
I can't access the internet after you run the last update! Please notify.
Hello
1. What is the error message that is disayed when connecting to internet?2. what type of internet connection do you use?3. Please post the KB number that was finally installed update.Please follow the links below to elp solve the problem.Method 1Using the troubleshooter from network in Windows 7Method 2Start the computer in start mode minimum avod conflicts with third aprty software.How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Note: When you have done all the troubleshooting steps, follow step 7 of the article mentioned above to start the computer in normal mode.You can run this tool and display the results.
Internet Connectivity evaluation toolMethod 3Step 1Start in safe mode with Networking if you have awired connection and troubleshoot completed the question.Description of the safe mode.
http://Windows.Microsoft.com/en-us/Windows7/what-is-safe-mode
Step 2
a. turn off your antivirus software and firewall
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-softwareb. disable your firewall
http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-offImportant note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
I hope this helps.
-
App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra
App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra
After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.
But Google chrome works well.
So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:
2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection
-
HP Envy: Instant ink "connect your printer to the internet" emails
I'm often abroad and so my printer is turned off for extended periods. I continue to receive e-mail from hp saying that my printer is not connected (I'd be very worried if it was!) and I should connect my printer to the internet - that of course isn't possible. Anyone know if it is possible to disable this feature? I have looked at various preferences in my account but cannot find a way to do it - emails are very irritating!
Hi @Adrian774,
Thanks for getting back to me.
I was browsing the documentation that I have on this printer and has been unable to find out exactly how much power these printers use. The printer HP Envy range are marked with the ENERGY STAR logo and qualified
to ENERGY STAR specifications of the Environmental Protection Agency of the United States for imaging devices. -
My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it does not work either.
This general situation may be similar to what is mentioned in this sequel to thread of the CSA
and if the remedy is to use instructions; detailed and I hope they are correct...
Re: Restart fails after installation of El Capitan help!
Or you can try and see on the repair of the system and then if your disk utility can
See the Macintosh HD, as a boot volume, you could restart from OS X Recovery to
the Mac system, to see if this solves the problem. There may be more than one cause.
You could try and boot into OS X Recovery, utilities out there, and other options are available.
• OS X: on OS X Recovery - Apple Support
This example uses a special partition on the hard drive of recovery which is not in the
same disc that the Mac OS X section; However if your hard drive is missing, these other
items may also be at risk. You must have and maintain backups of your duplicate content
on the external storage drives closed; In addition, a Time Machine backup helps to restore.
• Apple OS X and Time Machine tips:
http://pondini.org/OSX/home.html
• Tips for OS X - using HD recovery:
http://pondini.org/OSX/RecoveryHD.html
{Using the utility disc and other tools can be done from the boot OS X Recovery volume
Beware of the fact these tools can also delete or reformat your content; wiping.}
Don't know what to say; you could see visiting an Apple store with genius if
There is an official store. Usually for best time planning you would contact them for an appointment.
- Make an appointment at an Apple Retail Store Genius Bar
- Find an Apple authorized service provider
- https://locate.Apple.com/country - Apple - find places - selector of country (if outside the U.S.)
Or if there is no official retail Apple Store with genius, the following suggestion would be to contact
a service provider authorized Apple, an independent specialist who is qualified in the repair of Apple.
In any case...
Good luck & happy computing!
-
Error message "connection error. Check the Internet connection. " When you try to enable Web Services on HP Laserjet 1606dn.
Operating system: Windows 7
Thanks for the help,
Howard
Last UPDATED 21/07/13: after upgrading the firmware to the latest version, I could enable web services. Great help has this video: http://www.youtube.com/watch?v=Q5gpIGZXDXw
Thanks for trying to help.
In my case, it did not help.
I followed the instructions on this video: http://www.youtube.com/watch?v=Q5gpIGZXDXw.
The key was the update of the firmware, I think.
Walter
-
network cable unplugged wiundows xp
I'm unable to connect to wireless modem, the message's problem is the network cable is unplugged got new cable stillHello Verashanley
Since how long did begin?You have added a new software or hardware to the system?If the issue took place recently then you can try the system restore.If you have recently added anything to the system (hardware or software), then remove.If the system restore does not then check in Device Manager and verify that the network card is considered and no errors appear.To open Device Manager, click Start, and then click Control Panel. Click performance and Maintenanceand then click System. In the hardware tab, click Device Manager.Check the type of network card you have and that you try to update the drivers from the hardware manufactures Web site.Also, check the connection for the network adapter. Do you see any physical damage. When you plug the NIC saw all the lights on the network card lights up? If not, then you can deal with a hardware problem and need to contact the manufacture of the system and see about obtaining the card replaced.Let me know the results. Thank you. -
Original title:
Multiplayer on FSX used to work, but now there is an error message that says: unable to connect to GameSpy check your internet connection. What should I do?
I can connect to the local network, but not to the Internet (GameSpy).
Hi Matt,
Thanks for coming with your question in the Microsoft Community Forums.
It is apparent from your message that you get an error "Could not connect to GameSpy check your internet connection" when playing multiplayer on FSX.
You can try the steps in this link and check if that helps.
Microsoft Games: Multiplayer troubleshoot
http://support.Microsoft.com/kb/819836
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 3 of the KB article provided above.
Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
You can check out the following link and check:
Support for common issues of PC games
http://support.Microsoft.com/ph/7745
If the steps above could not solve the problem then it will be better to communicate with spy Game.
View the results of the proposed measures. Please let us know if you need help with Windows in the future and we will be happy to help you.
-
Firefox crashes whenever I connect my phone to the Internet
I just connect my phone to the Internet whenever I'm on my home WiFi network or Internet connection high speed, so I only use my part-time phone data connection. But whenever I plug in my phone (a X Starmobile KNIGHT, KitKat) Internet, Android always tells me, unfortunately, "Firefox has stopped." Did Firefox optimized for those who have "always - on" connectivity to the Internet? What are the possible workaround solutions for this?
Hi Bonarae,
Firefox shouldn't be gel like this; Looks like something is wrong.
Could you try to remove Firefox and then reinstall it to? Maybe with a new start, Firefox will be better behaved.
Warning: this will wipe all your data Firefox from your phone - including bookmarks, history, etc.
To do this:
- Open the game Google store
- Search for "Firefox".
- In the search results, tap on Firefox to see full information
- Press the button Uninstall
- Once the uninstall is complete, click install to reinstall Firefox.
Let us know if this solves the problem!
Maybe you are looking for
-
updates not responding error 80070641 code
-
Wireless adapter installs - is msg not found wireless adapter and the adapter never turns on.
HP desktop system Windows Vista Router DLink and compatible adapter for Windows 7 Inserted the disc and MS for installing drivers appears Microsoft window pops up saying: these data are incorrect. Install the drivers updated the site Internet DLink a
-
I have a server blade and s5000 620 switch (16 servers with NIC 10gig), I want to create three different VLAN's (12--> 192.168.12.1,15--> 192.168.15.1,192.168.8.1) and I want to assign VALN ip to the Server Blade, please help me on this configuration
-
traffic on PowerConnect 28XX series
Anyone know if there is any parameter to specify traffic on the Dell PowerConnect 2816 or 2824 manageable web?
-
Cannot open windows 7 or safe mode or anything else!
I have a laptop Toshiba Pro/P300 newish supplied with Vista, but I, perhaps foolishly, had a 'real' copy of Windows 7 Home put on it. It worked fine for 2 years then it started crashing last month (save data of disc/so-called) every day, but recently