Unable to connect smartphones to C50-A-1E2 Satellite Pro using Bluetooth

Similar Questions

• Unable to connect to a Sony DV from my laptop using the firewire port after the installation of updates

  Original title: connection for Vista FireWire camcorder problem

  I used to be able to connect my Sony DV camcorder to my laptop using the FireWire on the camcorder and laptop.   Once it is connected the Movie Maker detect my camcorder and automatically transfer the video.  However, since I've updated my computer laptop July 13, 2012, my laptop does not recognize not the camcorder.  I checked my computer and your camcorder is not yet listed.  I checked the latest updates for the driver of the firewire port 1394 and is the day the device is functioning properly.  Can anyone throw any light on this.  The only thing I can think is that since the update, he may have done something for the connection.

  Hi Scarlett,

  Thanks for the post. I'm sorry to hear that the Sony DV camcorder is not detected.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.
  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1. What is the model number of the Sony DV camcorder?
  2. you receive an error code or message?

  3 update do you have installed?

  See the Windows updates are installed:

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Please follow the methods and mark the question below:

  Method 1:

  First of all, let us check the status of the FireWire port in Manager devices to do this, follow the steps below:

  Check the status of the port in FireWire devices Manager

  a. Click Start, in the search box type Device Manager and press to enter.
  b. If you don't see the FireWire controller (probably listed under "IEEE 1394 Bus host controllers") in the list, then it is not correctly installed.
  c. If you see a yellow exclamation point, then you must install the drivers, who are usually on a CD that comes with the FireWire card with the camcorder.

  Method 2:

  Step 1:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Step 2:

  A device driver is not installed or a hardware device does not work correctly after you install a Service Pack in Windows Vista:

  http://support.Microsoft.com/kb/948187

  Method 3:

  Connecting i.Link® (IEEE 1394) of the camcorder is not recognized by the computer.

  http://www.KB.Sony.com/selfservice/viewContent.do?externalId=C86798&sliceId=1&MDL

  For more information, see the link below:

  Import analog video to your computer by using a DV camera:
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-analog-video-to-your-computer-by-using-a-DV-camera

  Import video from a videotape:
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-from-a-videotape

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Satellite Pro A300: Bluetooth headphones sound decreases when it is connected

  Hello

  I have a pair of headphones Creative SE2300 Bluetooth that I use with my Satellite Pro A300 and its built-in bluetooth.

  They connect well and work as they should (including the A2DP and AVRCP) except that the sound cuts every 20 seconds or more for anything from a fraction of a second for a couple. Abandonment of sound is completely intermittent no apparent reason for it.

  Now earphones Creative also came with a transmitter to connect to any helmet and the connection to it works perfectly with no decline in the sound. I also connected the earphones to my phone and it used to listen to music, and once again the connection is flawless.

  So why the connection to my laptop is so bad?

  I have improved the battery Bluetooth to the last v7.00.16 (T) and my headphones are fully charged.

  Any help will be very appreciated!

  You have any other Bluetooth connections configured for example data synchronization?

• PCMCIA card does not recognize the connection to the local network on Satellite Pro 4340

  Hello world

  I have 2 Satellite Pro 4340, running Win2K, SP4. I bought a card PCMCIA 10 / 100MB of Ultron (more or less no name :-))

  When you insert the card, Win2k recognizes the card, but when the I plug the network cable, it does not recognize the connection. Cable is fine. It seems there is no power on the PCMCIA card. I read on some forums that there is a problem with the Topic100 Card Bus driver and voltage. I see that many people have the problem but not where to find the driver for the problem :-/ I couldn't find a driver on toshiba support site. A

  ll have an idea, or better a link where I can download this driver? Any help is appreciated and thanks in advance for your help, support and answers.
  Corey

  If this card needs a driver you will not find it on the download page of manufacturer of portable. You must check the card producer site.

  As you know in the world of computers, it has set different standards. Produced very often cheap are not designed for these standards, and you can have different problems. I recommend you to use high quality products.

• Satellite Pro 6100: Bluetooth - how to connect the mobile phone

  I already have a satellite pro 6100 with the bluetooth software on. I tried to connect to my mobile phone without success. The problem seems to be with the laptop rather than the phone.
  How can I connect successfully. I have to update the new drivers? I bought it refurbished 3 years ago and I'm just getting round to the use of bluetooth!

  Well, the Bluetooth software has been installed on your laptop, BUT the question is:
  Your group has installed Bluetooth card?

  AFAIK the Bluetooth is an option available on this unit. You must check the Device Manager and check the bottom of the unit if the Bluetooth label has been placed.

  I think that you cannot connect your mobile phone because BT is not available.

• Unable to connect more then 2 monitors for Mac Pro end of 2013

  I was wondering if anyone had this problem and found a solution.

  The Mac pro (end 2013) model that I have would not work with 3 or more screens, little matter what I do. Even if him are all connected to separate buses. Only 2 would work at any given time. When I cut the work one, one nonfunctional lights.

  They are related:

  Computer-> Thunderbolt to HDMI-> monitor

  Computer-> Thunderbolt to HDMI-> monitor

  Computer-> monitor-> HDMI/DVI

  Setting up and connecting cable is not a problem here, because I tried a lot of different ways to connect with different types of monitors.

  Just replaced a new video card and the problem still there.

  am I missing, or hurt?

  any idea is aprisiated!

  Thank you!

  OS X El Caplitan

  10.11.6

  2.7 GHz 12-Core Intel Xeon E5

  64 GB 1866 MHz DDR3 ECC

  AMD over-pants D700 6144 MB

  Mac is unable to produce interfaces to more than two screens "legacy" levels of tension necessary to keep them from dropping out. You need an ACTIVE adapter for some of these screen to run more than two (including the interface HDMI built-in, that counts as if connect you something). poster "legacy" is other than DisplayPort and Mini DisplayPort

  Adapters ASSETS have re-drivers of signal in them, that's why they are more expensive. As long as you stay under 1920 wide, you don't ask the very expensive adapter Apple DVI Dual-Link, $ 100.

• Toshiba 32RL938 - unable to connect to the PC with Win 8.1 using WIDI

  Hello

  I have a 32RL938 TV and I would like to connect my PC to hybrid to WIDI.

  But I have a problem, when I search the TV, I can't.
  I have Windows 8.1 and I am doing this: http://www.intel.com/content/www/us/en/architecture-and-technology/widi-software-setup-win-8-1-video.html.

  When I go to the list of PC and TV, I can't

  Sorry for my bad English,
  Shiro.

  Well, the Toshiba 32RL938 TV supports definitely Intel WiDi
  The question is if your PC supports the Intel WiDi too?

  First of all, you should check if you can run Intel WiDi on your computer.
  To do this, see this page of Intel:
  http://www.Intel.com/p/en_US/support/highlights/wireless/wireless-display

  If your laptop has been upgraded to Windows 8.1, visit this page to check the updates.
  http://supportkb.Intel.com/wireless/wireless-display/templates/selfservice/intelwidi/#Portal/1026/article/5780

• Unable to connect 2 external monitors via the Port Replicator using Portege Z30 - 16U

  Hi all

  I need hell, I just moved from another laptop for Portege Z30 - 16U, I spent hours trying to connect my 2 external monitors to my Replicator Port Hi-Speed III 120W, but my laptop will see a monitor.

  I used 2 external monitors with my laptop for years because I do a lot or reading and I don't want to use the one and the laptop screen.

  I tried the mixture of a VGA and a HDMI and VGA cables, but nothing works.

  Can anyone tell me how I can connect and discover 2 external monitors with this laptop and port replicator, I can't believe that this is not possible, it makes no sense that Toshiba would then technilogically behind other laptop manufacturers.

  Thank you

  Liga

  Hello

  I'm not familiar with the Z30 Portreplicator, but the general behavior of the replicators of the double-displayconnector, is that 1 can be used.
  Not 2 simultaneously.

  I could be wrong, and you should easily be able to check it out - use only 1 at a time.
  First, then the other.
  If the two works when used alone, then my suspicion is right.

  I hope this helps!

  TOm BR

• Unable to connect to secure the WLAN with Satellite L30

  I just bought my laptop L30 and use that in a few hours. I have a frustrating problem that was annoying me:
  I have a model number of the wireless modem/router (+ 2 years) belkin F5D7360 - my wireless network. My router is configured with a SSID and configured to use the 11g and 11B modes.

  Connect to my network without wire in unsafe mode works very well. So it's not a thing g 11 or 11 b...

  As soon as I turn on security: WPA-Personal, PKIP encryption - the machine does not connect. Windows detects the network but when I try to connect - it returns an error saying authentication has expired - check the network settings. Several attempts that windows automatically diagnose and repair the problem does not work.

  I've rechecked, triple checked all the setting. Even changed passwords. Still no joy.

  It isn't the network installation - as when I connect with my Belkin 54g PCMCIA card - it works fine. Of course, I want to use the built-in... wireless and I want my network to be sure.

  To basic family support of Windows Vista Edition that comes with the package.

  I'm quite a techie, but this is my first experience with Vista - and Toshiba laptop.
  Currently, I'm stuck and eager to solve this annoying problem.

  Any ideas?

  [Edited by: admin on 15-Sep-2007 19:30]

  Hello

  Have you noticed the same behavior, use a WEP encryption? I have goggled a bit, but I wasn't able to find any info on this Belkin router.

  Please try to reboot the router and try to connect WLAN again.

• Unable to connect my P1102w printer to my network wireless (using Mac OS 10.6)

  I have a home network wireless vanilla (D-Link to a cable modem) and a MacMini running OS 10.6.8. My Mac laptop and 4th. GEN iPad work seamlessly. But my attempt to long hours to connect my new HP P1102w network was totally frustrating, despite a careful study of the documentation pdf, device/self test the printer configuration sheet, sailing on this forum, I'm looking at a slew of videos YouTube/HP and following all sorts of directions.

  The only consolation is the printer works fine on USB connection.

  Here are a few questions I met and that stopped me in my tracks:

  Carefully following both instructions pdf and video operating instructions online to HP, I get by step 6 w / no problemn. but then I go to step 7, which says:

  "Under the Mode of Communication , Infrastructure -click, select your network SSID from the list of names of the network (SSID)" and then click on the button. ""

  Problem is that there is nothing in this window. What I see is a State of the Wireless: enable or disabled (according to choice). And even if I try to select enabled, happening right now for people with reduced mobility. Aside: I note that the printed instructions show a copyright date of 2011. It's ancient history in the world of the CPU.

  Other issues: the single IP address I can find for the printer is the IPv4 address, but it is only for direct printing Configuration. What is the IP I'm looking for?

  Address of the printer hardward, I suppose, is your MAC? Boy, I sure could use better use of language here.

  So, needless to say, I'm stuck. It seems that it takes THAT hard, but so far nothing that I could find on the HP support or forums seems to help. Thanks for any advice you can provide.

  PS. I wouldn't go back this printer because I am a lover of HP printer, two decade, but alas, I might have if I can't find a solution.

  John Northwest

  Dear Gemini02,

  Thanks a lot for your helpful answer. It seems very complete, and I'm happy to give it a status of resolved problem, although I have not yet tried.  The reason is, one day before receiving your message, I benefited from technical support from HP that came with the guarantee of my printer (Oh!) I would have called them first before going on the forums. Lesson learned) and they took me in hand.

  I quickly reached a support person surprisingly knowledgeable and helpful tech (work of the night in Manila, PI shift), and I quickly accepted allow access remotely to my Mac and printer. For much of the next hour she practically held my hand as she walked through a fairly complex set of steps (very similar to yours) and here!, the problem has been resolved. She later sent me the steps she helped me through, as follows:

  ADDITIONAL INFORMATION: WIRELESS PRINTER CONNECTION

• Unable to connect to my microsoft account in the Pro Surface

  Hello

  My friend send the surface pro in Australia. But, because of a problem, I am not able to connect to my microsoft account. I was able to subscribe photos and other services. But, whenever I try "switch to microsoft account" under the "users" menu it says try again later and when I try to make a new account from microsoft directly through it, it also shows an error message. Also, when I try to connect to the store it shows "The PC is not connected to the internet" even though I am connected to the internet. Get really bothered by this.

  Guy!

  Finally fixed it. It was a stupid mistake. The problem was that the time and date are mistaken in the pro surface and also in the region. Once I got it, it worked. Thank you guys.

  See you soon.

• Unable to connect to the server, must be updated to use Lr. is there something wrong.

  Can someone tell me if creative cloud is down, I can't remotely access even the cat, their server is down?

  Hi charlottel,

  Please follow the steps in the link below.

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  Let me know if it helps.

  ~ UL

• Unable to connect to the Internet with my Satellite 1800 712

  Hello

  had to reinstall Windows XP Home on my Satellite 1800-712, unfortunately do not have the recovery disc otherwise it would all be ok.

  Now, I can't get on internet, I downloaded new drivers for LAN, they installed ok, LAN is set to autodetect, USB wireless dongle drivers installed everything is ok.

  In my tray icon (bottom right) shows the networks but with red cross... I get a message saying that wireless networks are within range, click here to see the networks... when I click, Sun protection comes up saying no. networks in range... aarrrgggh.
  What can I do, please?

  Hello

  First you need to check if the wireless network adapter appears in Device Manager (expand network controllers).
  If the local network adapter is listed and there is no yellow exclamation point, this means that the wireless network adapter has been installed correctly.
  Now you have to activate the Wlan switch (somewhere on the side of the laptop) and the FN + F8 key combination.

  Now Wlan is enabled and you should be able to set it up.
  You can use a 3rd Wlan tool part for configuration or specific parameters of Win XP.

  Check it!

• Unable to connect my scanjet 5300C on my new computer using windows 7

  I can't find a driver for my 5300C scanjet works with windows XP but not windows 7

  This is because the scanner is so old that no driver was never updated on an obsolete product.  I'm sorry.

• Re: Connect external monitor for Satellite Pro

  Hello

  I tried to connect my TV to my laptop Satellite Pro using an HDMI cable and a HDMI VGA cable. I did the key function and 5 but the TV always displays no signal, I checked the plug HDMI plugs into TV (3 of them) with my Virgin media TV box and they all work as expected, any help would be appreciated, does my nut with respect.

  Updated drivers and tried ATI tool without result, actually when I plug the HDMI into the laptop it doesn't recognize it, but it will be visible in the ATI software but still no signal.

  Any info appreciated
  Win 7 32 bit. Satellite Pro Bush 32 '' TV connection. .

  Hello

  If yo9ur laptop is preinstalled with the original operating system that you have received from Toshiba and if you use high quality HDMI Cable t should work.

  I put t know how it works on your TV, but if you use the HDMI 1 port number please allow this TV port and when this port is enabled using FN + F5 key combination to witch from laptop to TV.
  When you use FN + F5 you see several options here? Something like LCD, LCD + HDMI or HDMI only.