Unable to connect to a powershell session

Similar Questions

• Unable to connect to remote PowerShell and get error message.

  I have two computer to Windows 7.

  Unable to connect to remote PowerShell and this error message

  nvoke-command - computername XXXXXX - scriptblock {}
  get-process} - administrator credentials
  [XXXXXXX] failed to connect to the remote server XXXXXX with the
  error message: WinRM client cannot process the request. If the
  authentication scheme is different from Kerberos, or if the client computer is
  not joined to a domain, then HTTPS transport must be used or the destination
  machine must be added to the TrustedHosts configuration. Use winrm.cmd
  to configure TrustedHosts. Note that computers in the TrustedHosts list might
  do not be authenticated. You can get more information about it by running the
  following command: winrm help config. For more information, see the
  about_Remote_Troubleshooting help topic.
  + CategoryInfo: OpenError: [XXXXXX], PSRemotingT
  ransportException
  + FullyQualifiedErrorId: ServerNotTrusted, PSSessionStateBroken
  PS C:\windows\system32 >

  PS C:\Users\Administrator > Invoke-Command - ComputerName XXXX - ScriptBlock {get-process} - administrator credentials
  [XXXXXX] failed to connect to the remote server XXXXX with the following
  error message: the client cannot connect to the specified destination in the
  request. Verify that the service on the destination is running and that he accepts the
  applications. Consult the logs and documentation for running management service
  on the destination, most IIS or WinRM. If the destination is the WinRM
  service, run the following command on the destination to analyze and configure the
  WinRM service: "winrm quickconfig". For more information, see the
  about_Remote_Troubleshooting help topic.
  + CategoryInfo: OpenError: (XXXXX:String)], PSRemotingTranspo
  rtException
  + FullyQualifiedErrorId: CannotConnect, PSSessionStateBroken

  # Outgoing connection is fine because I can connect to a different machine here. However incoming connection does not work

  # Tried several things like "Enable-PSRemoting - Force." and it starts Properperly

  # And since I put the machine in workgroup, as well run "Set-Item WSMan: \localhost\Client\TrustedHosts * ' (it is running successfully as well)

  # Infact WinRM QuickConfig will not work.

  # And tried with and without firewall. and also applied several patches, but has not solved the problem

  Please notify

  Original title: WinRM

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Whenever I connect to a remote connection, I get an error message "unable to connect to this Terminal Server session remote control"

  Original title: unable to connect to this Terminal Server session remote control?

  Whenever I work with my friendly by connecting remotely, this information is pop ups as follows:

  Remote control cannot connect to this Terminal Server session. It is a known problem with Windows 2000 and XP and can occur under certain, rare conditions. To remady this situation, ask the local user switch to another session (connecting, on or off), or restart the computer.
  I know it's something related to windows authentication. But want to know in detail about this notification.
   

  Hi Victor,

  The question you posted would be better suited in the TechnNet Forums.

  I would recommend posting your thread in the link below:

  (Services Terminal Server) remote desktop services:

  http://social.technet.Microsoft.com/forums/en-us/winserverTS/threads

• I am unable to connect to the virtual pc Xp mode when I try to open a session given an error unable to connect to the domain that a domain controller is down or unavailable,

  I am unable to connect to the virtual pc Xp mode when I try to open a session given an error unable to connect to the domain that a domain controller is down or unavailable,

  Hi Rajendra Patil,

  I suggest you to ask your question on the TechNet Forums.

  Windows Virtual PC and XP Mode.

  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

  I hope this helps!

• Unable to connect wireless, "ACS user exceeded max sessions" users

  Some corporate users are unable to connect to the wireless company.

  On the WLC, I get the following logs:

  Authentication failure AAA for UserName:dto029 user Type: USER WLAN

  The GBA, I get the error:

  Authentic doesn't have a default group for ACS user exceeded max sessions (by default) 192.168.47.46 DTO029......

  That means "user ACS exceeded max Sessions? How can I solve this problem? Connection problem faces few users, while others are able to connect.

  Corporate SSID, Session Timeout & Client Exclusion is not enabled. The WLC version is 7.0.98.0 and the version of the CSA 4.2.0.124

  The problem is solved the ACS is restarted. Is there a permanent solution?

  Thanks in advance.

  Hello

  the error means that the users belong to the ACS Group (or the user themselves) has a "max session" setting, as described here:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/Overvw.html#wp826493

  .. and the user exceeds this limit.

  ACS can indeed limit the number of concurrent sessions for the same user name; This counter is based on the RADIUS account management information received from the AAA client: the session counter is increased when receiving a 'Start' accounting and it is decreased when you receive a "Stop" on accounting package.

  ACS for a reason if any don't receive an Acct-Stop, it won't reduce the number of session, so it may happen that your users exceed the max concurrent sessions allowed indeed.

  You can check the active sessions on the "users" ACS report:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/LgsRpts.html#wp680304

  If you restart ACS, this info is reset, so everything will work again, as you say; as an alternative, you can also use the options 'Purge logged in users' on the logged users page, but it would be wiser to really solve this problem by checking if... :

  -do you really need the config of max sessions? Otherwise, you can simply disable this on users/groups configuration

  -If you need for this limitation and the problem is related to the session that overlap, which means that the WLC should not send the Acct-Stop because there is always a session active and a new one is created at the same time, you can consider increasing the number of maximum session.

  HTH,

  Federico

  --

  If this answers your question please mark the question as "answered" and write it down, so other users can easily find it.

• Unable to connect receive error Windows cannot open session because your profile cannot be loaded.

  Original title: unable to connect.

  I am a user domain and when I try to log in with my references, get a message stating that windows cannot login because your profile cannot be loaded. What is the problem because it is impossible to create the profile in the registry or any other problem? I use Win XP OS.

  Hello

  The issue of Windows XP, you have posted is related to Windows XP in a domain environment. It is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

• Unable to connect to Apple ID after upgrade to ElCapitan 10.11.5

  I have the Macbook Air 11 "1.4 Ghz i5 with 4 GB 1600 MHz DDR3 (early 2014)

  I can't connect to the Apple ID (iCloud, Appstore...) after upgrade in ElCapitan 10.11.5

  About 3 weeks ago I improve my OS in ElCapitan as there was a signal of the Appstore upgrade.

  The download process and the installation was successful, but stuck on 'prepare your mac' session. It took about 2 hours, with cursor processing... Then I closed (push the power button on the keyboard) and turn.

  My Mac can work and in "about this Mac" already made it known that the OS is ElCapitan 10.11.5.

  But unfortunately, since then, I can't sign my Apple ID in the Mac (I use several apple 'iphone', 'ipad' products and my apple ID still works)

  

  I came to the nearby authorized Apple service, they don't have that one solution to re - install my Mac and I have to pay

  Maybe someone has a solution...

  Hi atiqurrakhman,

  From the information provided, it appears that you are unable to connect to your Apple ID for several services on your Mac from your update of OS X El Capitan 10.11.5. I know it's very important to have access to these services on your Mac, then I would be happy to provide assistance.

  Before you start, I recommend that you create a backup of your data using Time Machine. This website will provide more information:

  Use Time Machine to back up or restore your Mac - Apple Support

  Since the update seems stuck, it can not been installed properly on your system. The next step, I would recommend that you reinstall OS X from recovery using the steps here:

  How to reinstall OS X on your Mac - Apple Support

  Reinstall OS X from recovery

  If a recent Mac, you can use OS X Recovery to reinstall OS X.

  

  1. Turn on your Mac.
  2. As soon as you hear the startup tone, hold down the command and R on your keyboard.
  3. Release the buttons after the appearance of the Apple logo.
  4. If you are prompted, select a Wi - Fi network, or connect your Mac to the Internet via an Ethernet cable.
  5. After that the recovery menu will appear, select the option to install OS X.
  6. Follow the prompts on the screen to select your destination drive and install OS X.

  Once this process is complete, try to sign in with your Apple ID using multiple services to see if the problem has been resolved.

  Have a great rest of your day!

• gettign error "unable to connect".

  Hello

  I have new phone purchase watch Elife E3 a few days ago. I downloaded Skype-free IM & video call, and it works great 2 - 3 times when I open a session and after 2 - 3 times it gives "Unable to connect" error when I connect.

  the I uninstall Skype and reinstall it again and it works fine, but after 2 - 3 times it is in error "Unable to connect" again do not know what the problem is.

  any body has any solution for this.

  Thanks in advance

  Sunil

  For a long time, tap the app and choose 'Clear data' or something similar to reset. Its a big trouble, but it's the only solution. To avoid this, I suggest to sign first and the app completely in the drawer of the app from closing before turning off WiFi because it helps a lot. Also, perhaps heat your device upwards before running Skype to avoid it hanging.

• Unable to connect the WD external hard drive

  Original title: external drive wd drive 1 TB.

  I have a problem getting my computer to accept my drive external wd on d ' training. I have a basic dell computer vista laptop.

  They have been connected for more than a year. No problems with the previous backups. The last time I used my computer for offline family history, he was running slow and not answered, then it crashed. Can only access the files already on the c drive. During an attempt to access previous back ups, model said unidentified ports connection. All I can think to try... Tried to connect to another computer in the library. Not showing no sign that it is connected. How can I get the previous files and back ups, or has permanently hard-drive?

  I hope that I haven't lost 4 years of work?

  I am not connected to the internet at home and only go on the net to my library

  Hi John,

  Thanks for the post. I understand that you are unable to connect the WD external drive.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1. you receive an error code or message?

  2. have you made any recent hardware or exchange of software on your computer before the show?

  3 have you tried to connect the external hard drive on another USB port?

  Please follow the methods and mark the question below:

  Method 1:

  I suggest you to run the Microsoft Fix It from the link below.

  Hardware devices do not work or are not detected in Windows:

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Uninstall and reinstall the USB drivers.

  You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the following steps:

  a. Click Start and then click Control Panel.

  b. click System and Maintenance, click System and then click on Device Manager.

  Note: If the control panel is in Classic view, double-click System, and then click Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  c. in the Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  d. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows will automatically reinstall all USB controllers.

  Note: Connect USB devices to the computer once the drivers of conflict are uninstalled, and once the computer is restarted.

  If you are still having the same problem then you can check the device USB drivers updated using windows update.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  WD external drive is not recognized or detected in Windows XP after installation and use

  http://wdc.custhelp.com/app/answers/detail/A_ID/1695/p/228/session/L3RpbWUvMTM1MDQzMTYwNy9zaWQvQ0NTdVFVOGw%3D

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• BB Simulator, get: "unable to connect to the selected Mobile Data Service, please try again later."

  I run MDS firstly, it seems well, window is open. But when I run the Simulator, in my case 8300. I get error when you try to access any web resource: unable to connect to the selected Mobile Data Service, please try again later.

  I've initially tried to do this on win7 and moved to xp, which solved my problem of MDS, but I still can't get networking funciton on the Simulator. All that I'm missing? Need to make

  Had, it works with the help of Michael on StackOverflow.

  On Win7.

  (1) uninstalled java and things bb.

  (2) fresh installed JDK 6 with the SDK

  (3) path added to jdk/bin to the path environment variable

  (4) downloaded Simulator runing 4.2 os No 4.5

  (5) installed MDS and Simulator in folder BlackBarry under C: /, runing administrator installation

  (6) powershell started as an administrator

  (7) sailed to MDS folder via powershell run.bat and executed

  8) sailed to BB Simulator via powershell folder and run 8300.bat (downloaded 8300 simulator)

• Unable to connect to the computer because the password is not be accepted.

  Hello

  So yesterday, I decided to put a password on my pc (Windows 7 Home Premium 64-bit), but when I turned on my pc today, he immediately said that I have to enter a user name and a password first.

  But I did have the chance to fill in anything but it was weird.

  Anyway, I pressed OK and it sent me to the login screen.

  All of a sudden there is 2 users, instead of one, but none of them was my account.

  They both had no name or avatar so they were square just empty, and they're all two protected by Word.

  My password does not work on both accounts, so I can not connect. I tried to get with Safe Mode, but even then he asked me a password!

  I have a few projects out there that need to be finished and send it within 2 weeks so I really need these files.

  I don't mind if I have to format my whole hard drive, but is it possible to go beyond the login screen?

  Or just a way at least to get some files?

  All advice is appreciated!

  -Martin

  Hello

  If you put a password on it, it is normal that next time you start it will ask for this password.

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  To use system restore to log on Windows 7 or Windows Vista when you lose access to an account, follow these steps.

  Note To do this, there must be a restore point from the system in which the connection was successful.

  1. Insert the Windows Vista or Windows 7 DVD, and restart the computer.
  2. When you receive the following message appears, press a key:
     Press any key to start from the CD or DVD.
  3. Set the following preferences and then click Next:
     • To install language
     • Time and currency formats
     • Keyboard or input method
  4. Click repair your computerand select the operating system you want to repair, and then click Next.
  5. Click System Restore, and then click Next.
  6. Click on the food that you want to use, and then click Next.

     Note Click a restore point that will return the computer to a State where the connection is successful. After you use the system restore feature, reinstall all programs or updates that can be removed. You won't lose any personal documents. However, you may have to reinstall programs. You may also need to reset some personal settings.

  7. Confirm the disks that you want to restore, and then click Next.
  8. Click Finish, and then click Yes when you are prompted.
  9. When the system restore process is complete, click restart to restart the computer.
  10. Once the computer restarts, click close to confirm that the system restore process has finished successfully.
  11. Use an appropriate method to open a session. For example, log in using an older password, or log in using another computer account.
  12. etc.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  http://support.Microsoft.com/kb/189126/en-us

  Tools third password

  Some third-party companies claim to be able to bypass the password that have been applied to files and features that use Microsoft programs. For legal reasons, we cannot recommend or endorse any of these companies. If you want to help to break or reset a password, you can locate and contact a third party company for this help. You use these third-party products and services at your own risk.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  _______________________________________________________

  Saving your files:

  You can remove the hard drive and put it in a hard drive USB enclosure > plug it into another computer > and try to read and copy your data in this way.

  Or, you can download Knoppix > make a bootdisk to > start your system with it (IF your material is all work) > and copy your data from the hard drive like that.

  http://Knoppix.NET/

  _______________________________________________________

  To reinstall the operating system:

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  See you soon.

• Unable to connect XPMuser mode

  I m unable to connect user-xpm, my laptop is on a domain, I forgot the password, I tried windows recovery but still impossible to recover the password, I have reset the password to the server for the user to xpm after that I logged in mode xpmuser, but it displays a message that "you do not have it have access to the logon for the session" what to do to connect xpmuser where I kept my files and programs?

  someone please help.

  katyana_89

  Ansari

  Hello Ansari Nazim,

  You have the same problem as described in the link below?

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/xpm-user-unable-to-login-forgot-password/88393d90-9a4a-4E2B-9a85-0b130bff8e53

  If Yes, then you must post your question in Technet for better assistance.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  Windows 7 IT Pro category

  Hope this information helps.

• Unable to connect to 11.1.2.4.0 using OBIEE 11.1.1.7.0 Admintool HFM

  Hello!

  Im trying to import a HFM cube admintool hollow OBIEE but im getting the error below.

  The RPD is generated by the OFMA config_utility and its pool of connections.

  The looks of connection as follows:

  ADM:thin:com. Oracle.HFM.HsvADMDriver:FMCLUSTER:APP2015

  Someone has experienced this problem where ins OBIEE't able to connect to 11.1.2.4.0 using Admintool of OBIEE HFM?

  I have read the post on John's amazing blog, but in this case, he was using OBIEE 11.1.1.9.0 against HFM 11.1.2.4.0

  More of life than that...: HFM 11.1.2.4 as a source of data in OBIEE

  < OBIEEVersion > 11.1.1.7.0

  < HFM_VERSION > 11.1.2.4.0

  [2015 06-18 T 15: 56:18.000 + 02:00] [OracleBIServerComponent] [ERROR: 1] [] [] [ecid:] [tid: 16f0] [nQSError: 77031] error occurs when calling remote ADMImportService service. Details: Details: []

  Unable to connect to the ADM.

  com.hyperion.ap.APException: [0] EPMHFM-69052: preferential kunde inte oppna applications.

  at oracle.adm.session.ADMDriverSession.openApplication(ADMDriverSession.java:3260)

  at oracle.adm.session.ADMDriverSession.connect(ADMDriverSession.java:128)

  at com.oracle.hfm.HsvADMDriver.openConnection(HsvADMDriver.java:95)

  at com.oracle.hfm.HsvADMDriver.HssConnOpenConnection(HsvADMDriver.java:67)

  at com.hyperion.ap.adm.HssConnSessionWrapper.HssConnOpenConnection(HssConnSessionWrapper.java:1483)

  at com.hyperion.ap.adm.HssAdm.openConnection(HssAdm.java:912)

  at com.hyperion.ap.adm.HssAdm.internal_openConnection(HssAdm.java:1799)

  at com.hyperion.ap.adm.HssAdm.openConnection(HssAdm.java:1065)

  at oracle.bi.integration.admimport.service.ADMImportClient.openConnection(ADMImportClient.java:64)

  at oracle.bi.integration.admimport.service.ADMImportService.openConnection(ADMImportService.java:159)

  at oracle.bi.integration.admimport.service.ADMImportService.executeDataSources(ADMImportService.java:146)

  at oracle.bi.integration.admimport.service.ADMImportService.execute(ADMImportService.java:67)

  at oracle.bi.integration.javahost.ServiceRpcCall.processMessageInternal(ServiceRpcCall.java:55)

  at com.siebel.analytics.javahost.AbstractRpcCall.processMessage(AbstractRpcCall.java:251)

  at com.siebel.analytics.javahost.MessageProcessorImpl.processMessage(MessageProcessorImpl.java:193)

  to com.siebel.analytics.javahost.Listener$ Job.run (Listener.java:223)

  at com.siebel.analytics.javahost.standalone.SAJobManagerImpl.threadMain(SAJobManagerImpl.java:207)

  to com.siebel.analytics.javahost.standalone.SAJobManagerImpl$ 1.run(SAJobManagerImpl.java:155)

  at java.lang.Thread.run(Thread.java:662)

  ]]

  Any help is greatly appreciated

  Thanks in advance!

  Lamin

  Hi John!

  The problem is solved!

  The culprit was a path reference in opmn.xml which was not properly get picked up.

  Thanks for your time and your ideas!

  Cordially Lamin

• When I change authentication to LDAP (EMbedded LDAP) vco for test, vco client is unable to connect to vcenter. Can someone tell me what is the problem I have

  It is seemly all things are OK configuration web page

  But vco client is unable to connect to vcenter

  Have a screenshot of the vCenter plug-in would help.

  If it is set at the session by the user that the vCO will try to authenticate with the LDAP credentials embedded on the vCenter which of course will fail.

• FDM Create Application Error: Unable to connect to the database.

  Hello
  While trying to create a new application of FDM, I am not able to connect to the database. error: "unable to connect to the database. Please check the databases and verify the database is '. '. able to connect to the DB using the command line.
  
  I created the user in Oracle with access s/n (provided permissions: RESOURCE, CONNECT, CREATE SESSION, CREATE VIEW, CREATE DATABASE LINK)
  Oracle 32-bit client is installed with windows server 2008 R2 64-bit.
  
  I need to update the variable path or any other parameter that needs to be updated.
  Please help solve this problem.

  Hello

  I tried test the connection to the database of FDM help a 32-bit UDL file to check the 32-bit Oracle Client is installed and where the provider OLE DB for Oracle was not available.
  It was a problem with the installation of the Oracle customer 11.2.0.3, it seems that it is a known bug (NOTE > install the 11.2.0.3 Oracle OLE DB provider since the installation of Client media registers properly the provider [ID 1380742.1] Bug: 13417266 WHILE upgrading from 11.2.0.3, Setup is unable to REGISTER DLL ORAOLEDB).
  We have installed Oracle earlier version client and have seen the for Oracle OLEDB provider.
  After this created FDM application successfully.

  Thank you