withICH driver problems (controllers usb family

Similar Questions

• HP Photosmart B110: Solutions Center installs - problems of usb - only wanted to scan - how to install the scanner part

  -With the help of HP Photosmart B110

  -Use of Tower/Desktop computer running Windows 7 64 bit

  Printer/Scanner connected via WiFi to router

  -Printer part works, I can print to this device

  -Scanner is accessible via the device Web page.

  I want the software of the scanner Solutions Center.

  I can't install the Solutions Center on Windows 7 64 bit. Setup stops and says that I have USB hardware and driver problems. USB on my Tower is USB2 and USB3 ports. Everything works perfectly and the Windows Device Manager has no problem with USB drivers/devices.

  How can I install the scanner software (or all of the Solutions Center software)?

  Tried to look in the folder for the files of instsaller scanner, nothing seems to work. (pulled other positions where it not install Solutions Center). Computer is working very well, so my only option at the moment is to look through the device's Web page, but it is not the best. And I would like to use the software. Also one third of the software "fax and scan" software and windows does not see the connected B110 (probably because it is on a network and not directly plugged into a usb port), so these two options came out.

  HP forum, help please. Is there a way to bypass the usb part? I use this device on a network. Windows 7 sees (even if only as a printer), so also want windows to consider it as a scanner as well.

  Thank you

  Hi @jedi11csa,

  Thank you very much to get back again.

  I just talked with a few colleagues in this regard, and this problem seems to be more a matter of Windows operating system, if the computer displays that USB related errors as well as the installation had not yet reached the point where it asks you to select your connection type.

  Maybe it's an investigation that is best suited for community Microsoft Forums as my resources have been exhausted in this respect.

  I hope that you are able to find the solution you need.

  Thank you.

• Peripheral Audio USB-Mulit-channel has a driver problem and PnP device problem.

  I try to use the blue ice pre - amp for recording. Under channel-Mulit-USB Audio Device, device status, it displays "this device cannot start. (Code 10) "once I start the troubleshooting process it shows that even after reinstalling the driver it still does not work and that there is a problem with the device PnP I already tried to uninstall the driver and restart my laptop to let windows try again but nothing works.  Please help D:! Thank you all very much! :]
  -Kyle

  Hello

  1. is this problem limited with a specific USB device?

  2. it worked before?

  3. using this unit for the first time on this computer?

  4. the other USB devices work properly?

  Method 1: Run the troubleshooter and see if it helps.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues. You may need to update the chipset drivers and the USB controller

  Follow the given article below for more information.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  In addition, update the driver from the manufacturer's Web site and see if it helps.

  Method 3: Uninstall and reinstall the USB drivers and check if the problem persists

  1 disconnect all USB devices except the USB keyboard and mouse.

  2. click on start and type device manager in the start search box and press ENTER.
  3. Select the Device Manager and a pop-up window will Device Manager.
  4. click the + on controllers USB Bus to develop it.
  5. right click on all controllers USB and USB Root Hub that is listed, and select uninstall.
  6. restart the computer.
  7. plug in the appliance and check if it works.
   
   
   
   
  I hope this helps.

• The conclusion for M - Audio MobilePre USB driver problem

  The conclusion for M - Audio MobilePre USB driver problem

  Use: iMac

  OS: El Capitan 1011.2

  The latest driver I could find was 1.8.1.

  Error message:

  Installation failed - Setup could not install the software because there was no

  available software

  I would use this hardware with Final Cut ProX 10.2.2 and Garageband 10.1.0.1

  A quick search seems to indicate the latest version of the driver to be 1.2.1 - there was no 1.8.1 I could find. It has been out for more than a year, so no mention of El Capitan, but it could work. I'll make sure that you have the right to download and try again.

• Seagate FreeAgent GoFlex USB external hard drive problem

  I have a Seagate USB external hard drive. It is loaded with all my pictures and music. I can not open. I did in the past without problem.  It is a Seagate FreeAgent GoFlex. It says that I have the drivers updated. I've started and restarted. uninstalled and installed etc. It's also almost if there is nothing on the disc. When I plug it into the USB port it will not appear in the my computer tab, however, it shows in the toolbar at the bottom as installed but with nothing on it. When I run the troubleshooter, it says that the problem can not be detected, but it also says that the device is functioning properly. I do not know because I can not the specifics to fill. Y at - it somewhere that I can take this drive to see if someone can see if my files are always about this and that so they can transfer to another drive? Help, please!

  [Moved from comments]

  Hi Philippe,.

  Welcome to the Microsoft Community and thank you for the post about it

  It seems that when you connect an external hard drive Seagate USB to your computer, there is no indication in the drive. I appreciate the action that you tried to solve the problem.

  I would like to know the following information.

  (1) what version of Windows is currently installed on your computer?
  (2) have you tried to connect the hard drive to other USB ports?
  (3) you are able to use other USB devices?

  I suggest you to connect the hard drive to another computer and check.

  Your answers are important to us, please write to us with the requested information so that we can help more.

• Driver problem with GalaxyTab 10.1 - peripheral USB MTP has a driver problem: Microsoft Virtual WiFi Miniport has a driver problem

  I just a GalaxyTab 10.1.  Connected to the computer and got the following driver problems: "USB MTP device has a driver problem" and "Microsoft Virtual WiFi Miniport has a driver problem.  What are the corrections?  My automatic updates are up to date.  is it a problem to Microsoft or GalaxyTab?

  Hi David,

  1. have you received any disk software for GalaxyTab 10.1?

  Method 1:

  You can try to start the Fixit material and check.

  Hardware devices do not work or are not detected in Windows

  Method 1:

  You can try to uninstall and reinstall the device.

  a. click the Start button, in the start search box, type devmgmt.msc and press to enter.

  b. Select the USB device and right click on it.

  c. now, select uninstall.

  d. restart the computer.

  Alternatively, you can download the drivers for your Samsung device from following link:

  http://www.Samsung.com/UK/support/detail/supportPrdDetail.do?menu=FW&prd_mdl_cd=gt-P1000CWAXEU

  2. What is the error or message code you get for Virtual WiFi Miniport in Device Manager?

  Method 1:

  Alternatively, you can try to reinstall the Virtual WiFi Miniport driver and see if it helps.

  a. click the Start button, in the start search box, type devmgmt.msc and press to enter.

  b. Select the device to Wifi Miniport Adapter, the network adapter and right click on it

  c. now, select uninstall.

  d. restart the computer.

  After the computer restarts, the drivers will be installed automatically.

  Method 2:

  If you're still having problems, then try updating the chipset and network card drivers.

  For more information, you can consult the following articles:

  What to do when a device is not installed correctly

  Updated a hardware driver that is not working properly

  Hope this information is useful.

• Attempt to connect Smart Rugby at DoubleTwist, USB device driver problem

  Original title - mobile phone android

  Try to connect my Smart Rugby to DoubleTwist. USB MTP device has a driver problem. What can I do?

  Hello

  Check with the manufacturer of phone or your support telephone company if they were provided with the phone.

  Rob - SpiritX

• prolific usb-to-serial com port driver problem. I can't load the driver from propper for her. What should I do?

  prolific usb-to-serial com port driver problem. I can't load the driver appropriate for that. What should I do?

  Hello edmcski,

  This thread has been created in the Feedback forum. the Microsoft moderation team has moved this thread on the forums of hardware and drivers.

• USB Port driver problems

  Windows XP Professional will not recognize my key USB flash drive in the USB ports before; However, it does not recognize the flash drive in the back USB ports of the Tower pc which is very annoying. How can I get the drive J it is called on the front USB port of the tower to recognize my flash drive? I want so that it can detect the flash drive as soon as I insert it into the front USB port. In addition, the front USB does not detect my Ipod USB port or USB digital camera.

  Sometimes the front USB ports are not yet connected, so it's good to open the suitcase and check. Sometimes these ports on the motherboard just died, especially if the computer is old.

  Have the ports before does not work, is a very common problem that can have various reasons:

  http://www.Google.com/#hl=en&source=HP&q=front+USB+ports+not+working&AQ=0&AQI=G10&OQ=front+USB+por&FP=be5ffa94030d2d34

  Unfortunately, it will be difficult for someone who is not practical with the computer to help effectively. It's strictly a hardware problem and nothing to do with Windows.

  A good solution is to buy a USB hub (I prefer those motorized), attach it to a rear USB port, but do it right from the start where it provides additional ports are easily accessible. USB hubs are not terribly expensive, around $ 25-30 for a motor home. MS - MVP - Elephant Boy computers - don't panic!

• __Vista and external hard USB drive problems. __

  I have an old USB Maxtor attached an external hard drive with vista home premium.  It was working fine until I left for two weeks.  Now, vista starts up with this drive connected.  When I unplug the USB connection, it starts OK.    Second, but related.  I use this drive to Flash the pictures on the box of the gadget.  Works OK for a bit, then the photos appear more.  I redefine the source folder to make it work again.  The two problems are related to the external hard drive.  Is it vista, usb or drive?

  Any help would be appreciated.

  Vinnie

  Hi Vinnie,

  I suggest you try the following steps to refine the question:

  Step 1: connect the USB device to a different USB port and test it.

  When a device is not functioning, Device Manager also typically displays an error message with an error code that comes with it. First, search for errors in the Manager of devices to do this, follow the steps below:

  Step 2: Disconnect the USB device, then on startup, check for the error code in Device Manager

  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in Device Manager, look for the USB device, and then double-click the device name.
  3. under the gaze of general tab for the status of the device for any error code indicated.

  Get-help-with-Device-Manager-errors
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors

  Step 3: Disconnect the USB device and start, run the fixit provided in the link below at the office level.
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Thank you, and in what concerns:
  Ajay K
  Microsoft Answers Support Engineer

  --------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Driver problem with prolific USB-to-Serial and Windows 7 connector

  I'm trying to connect a UPS to PowerPanel to my new ACER computer with 64-bit Windows 7 via a prolific USB-serial connector software. The convenience store says he has a driver problem the convenience store is unable to correct. However, messages also said that my driver is up to date and the device working properly. I have installed, uninstalled and tried to fix several different drivers, run the troubleshooter, etc.. I tried to run the stand-alone Windows Installer, but it says "not compatible with your computer." Help! Is there anything else I can try?

  Hi Mary,

  Until solve us the problem we need more information on the issue.

  ·        What is the exact error message that you receive when you connect theprolific USB-serial connector to your computer?

  ·         Could you plug the connector on the computer as soon as possible without any problem?

  ·         What is the model number of the connector?

  ·         The ups and the computer manufacturer and what is the model number?

  ·         Who is the stand-alone Windows Installer you tried to install?

   

   

  You can first check if the USB connector to prolific series model if its compatible with windows 7 Access the link below to check the compatibility with Windows 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  You can also contact themanufacturer prolific USB-serial connector and check if the device is compatible with Windows 7 and if you need to install any other drivers to get the device to work.

   

   

  Post back with the required information.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• USB mass storage device driver problem

  I have 64 bit computer purchased new in July 2012, running Windows 7 with a Lexmark Interpret S405 printer.  It has been installed and works well for months and today, I asked a print a page on a Web site, and it would not print.  I received an error message indicating that the printer cannot communicate with the computer.  I tried to delete the request for printing, but the computer did not respond.  So I rebooted it.  After it restarted, I went to devices and printers to check the printer, and there the image representing that she needed troubleshooting.  Tried, but it did not fix the problem.  Then I received another message: USB Mass Storage Device has a driver problem.  Tried to find and install the updates for it, but the info said that the driver was already installed.  Can you help me solve this problem?  I'm not a computer scientist, just a frustrated computer user.  Thank you!

  I asked a question yesterday about an error message that says: USB Mass Storage Device has a driver problem.  This morning I tried unplugging the power to the printer and then plugged back in.... problem solved.  No need for additional assistance at this time.  Thanks anyway!

• Samsung Mobile USB Remote NDIS Network driver problem woth Windows 8

  Hello

  I've updated since a Windows 7 PC to a Windows 8 BPC.

  Previously, with Windows 7, I had no problem USB modem to connect to the Internet via WIFI to my Samsung Galaxy S3 (or 3G).
  With Windows 8 However, I can only attach a few minutes and then the connection is cut. When I watched the driver by using the Device Manager on my PC, I saw the following error message:
  "Samsung Mobile USB Remote NDIS Network has a driver problem".

  I used PC troubleshooting functionality that does not set it and gave me the following message is displayed:
  "The mobile Samsung remote NDIS device USB network adapter lives driver or problems with the material, do not set".

  I uninstalled the driver and reconnected my phone via USB, USB port checked attaching who re-installed the driver.
  I then the internet connection on my PC for a few minutes before it shuts down again and the process repeats.
  I have looked on various online forums and some suggest that the driver in using and liked?

  There is no problem of connection and access to my phone via USB, just storage attached to connect to the internet using my phone signal.

  I have also contacted Samsung who advised me to contact Microsoft.

  Please can you help me?

  Thank you very much
  Ian Nugent

  iannugent,

  In case you still have questions, because I had the same problem myself, the pilot would have to stop when the registry was refreshing.  However, he could not find a driver dependent and would not completely load the driver, that "off" your internet connection.

  The solution is to

  -Open your device manager,

  -Find the SAMSUNG NDIS device under network adapters

  -Right-click on the troubled device and select Update driver software

  -Select Browse my computer for software driver

  -Select Let me pick from a list of drivers for devices on my computer

  -Select Remote NDIS based Internet sharing devices and click Next

  .. .that should be your dependent on engine and you should have no problem thereafter I've not had any since.  In addition, there was no reboot needed.  Windows figured it all as soon as I installed this driver dependent

  I hope this helps.

  The e

• M9U93PA: problem wih usb driver for my laptop

  need driver for my usb driver.,.

  the hardware id is below. pls send the driver

  PCI\VEN_8086 & DEV_22B5 & SUBSYS_80C5103C & REV_21
  PCI\VEN_8086 & DEV_22B5 & SUBSYS_80C5103C
  PCI\VEN_8086 & DEV_22B5 & CC_0C0330
  PCI\VEN_8086 & DEV_22B5 & CC_0C03

  Hello

  Try the driver on the following lin k.

  https://Downloadcenter.Intel.com/download/24896/USB-3-0-Intel-USB-3-0-driver-for-Intel-NUC

  Kind regards

  DP - K

• My mouse freezes as soon as I connect a flash drive for my USB XP

  My mouse freezed up as soon as I connect the flash drive to my USB key.  I then get a message that says: "power surge on Hub Port, a USB device has exceeded the limits of its hub port power.  Help solve this problem click this message. "Which of course, I can't because the mouse is stuck to the top.  I then turn off the computer by the turn button and reboot.  It is then very well until I have plug the flash drive and then I get the same thing again.  I have several flashdrives and it does the same thing with each of them.  I tried to take to another computer and they worked very well.  I scanned the virus and they were clear.  I also scanned my computer for viruses and it was clear.  My mouse is not a USB mouse.  It's an old computer and caches at the back of the tower.  The only other USB device I have is my scanner and it works fine.  And I get the same thing, even when the scanner is disconnected.   I am confused because I can't save or retrieve information from my flashdrives.  My daughter says my windows is confused and thinks I have too many devices plugged in at the same time when I'm not.   I have Windows XP.   How can I solve this problem?

  My mouse freezed up as soon as I connect the flash drive to my USB key.  I then get a message that says: "power surge on Hub Port, a USB device has exceeded the limits of its hub port power.  Help solve this problem click this message. "Which of course, I can't because the mouse is stuck to the top.  I then turn off the computer by the turn button and reboot.  It is then very well until I have plug the flash drive and then I get the same thing again.  I have several flashdrives and it does the same thing with each of them.  I tried to take to another computer and they worked very well.  I scanned the virus and they were clear.  I also scanned my computer for viruses and it was clear.  My mouse is not a USB mouse.  It's an old computer and caches at the back of the tower.  The only other USB device I have is my scanner and it works fine.  And I get the same thing, even when the scanner is disconnected.   I am confused because I can't save or retrieve information from my flashdrives.  My daughter says my windows is confused and thinks I have too many devices plugged in at the same time when I'm not.   I have Windows XP.   How can I solve this problem?

  This is the result of not not more likely USB ports. You can try to update the drivers of usb device, but if the problem there is not a lot you can do otherwise than to buy an expansion usb card. You can disable usb error reports to stop seeing the error.

  http://support.Microsoft.com/kb/329632

  1. open Device Manager

  2 expand the Bus USB controllers section. Are looking for, then
  Double-click a host controller that has either the word "Universal" or
  'Open' in the title.

  3. in the Properties dialog box, click the Advanced tab, and then select the checkbox 'don't tell me about USB errors ".
  Note: If you deselect this option, all other USB error messages will also die.