"Unable to connect to debugger" on the physical unit

Similar Questions

• I'm unable to connect to wireless modem, the message's problem is the network cable is unplugged got new cable still

  network cable unplugged wiundows xp

  I'm unable to connect to wireless modem, the message's problem is the network cable is unplugged got new cable still

  Hello Verashanley

  Since how long did begin?
  You have added a new software or hardware to the system?
  If the issue took place recently then you can try the system restore.
  How to perform system restore in Windows XP.
  If you have recently added anything to the system (hardware or software), then remove.
  If the system restore does not then check in Device Manager and verify that the network card is considered and no errors appear.
  To open Device Manager, click Start, and then click Control Panel. Click performance and Maintenanceand then click System. In the hardware tab, click Device Manager.
  Check the type of network card you have and that you try to update the drivers from the hardware manufactures Web site.
  Also, check the connection for the network adapter. Do you see any physical damage. When you plug the NIC saw all the lights on the network card lights up? If not, then you can deal with a hardware problem and need to contact the manufacture of the system and see about obtaining the card replaced.
  Let me know the results. Thank you.

• My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it

  My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it does not work either.

  This general situation may be similar to what is mentioned in this sequel to thread of the CSA

  and if the remedy is to use instructions; detailed and I hope they are correct...

  Re: Restart fails after installation of El Capitan help!

  Or you can try and see on the repair of the system and then if your disk utility can

  See the Macintosh HD, as a boot volume, you could restart from OS X Recovery to

  the Mac system, to see if this solves the problem. There may be more than one cause.

  You could try and boot into OS X Recovery, utilities out there, and other options are available.

  • OS X: on OS X Recovery - Apple Support

  This example uses a special partition on the hard drive of recovery which is not in the

  same disc that the Mac OS X section; However if your hard drive is missing, these other

  items may also be at risk. You must have and maintain backups of your duplicate content

  on the external storage drives closed; In addition, a Time Machine backup helps to restore.

  • Apple OS X and Time Machine tips:

  http://pondini.org/OSX/home.html

  • Tips for OS X - using HD recovery:

  http://pondini.org/OSX/RecoveryHD.html

  {Using the utility disc and other tools can be done from the boot OS X Recovery volume

  Beware of the fact these tools can also delete or reformat your content; wiping.}

  Don't know what to say; you could see visiting an Apple store with genius if

  There is an official store. Usually for best time planning you would contact them for an appointment.

  • Make an appointment at an Apple Retail Store Genius Bar
  • Find an Apple authorized service provider
  • https://locate.Apple.com/country - Apple - find places - selector of country (if outside the U.S.)

  Or if there is no official retail Apple Store with genius, the following suggestion would be to contact

  a service provider authorized Apple, an independent specialist who is qualified in the repair of Apple.

  In any case...

  Good luck & happy computing!

• Unable to connect to aol. The mistake of AOL bed AC - 3000 084100103

  Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs

  I have a Windows Professional (Windows 7 6.1) on my new HP Pro Book 4525 s. I downloaded AOL 9.6 and unable to connect to aol. The mistake of AOL bed AC - 3000 084100103. How can I solve this problem?

  Hi Harry00700

  The error message seems to be accurate with the AOL servers. I suggest you to follow the links and check if it helps.

  http://Canada.AOL.com/help_files/canada_help9/Frequently_asked_Questions/What_if_I_cannot_connect_to_the_AOL_service.htm

  http://help.AOL.com/help/microsites/microsite.do?cmd=displayKC&docType=kc&externalId=222310

  If this is not enough, you can communicate with AOL.

  http://help.AOL.com/help/microsites/microsite.do

  Hope the helps of information.

• Unable to connect my phone to the pc

  Unable to connect my Nokia 625 to my pc to acquire urgent help

  Not here, it is just a Web site by peers (no one here is paid to provide assistance). If you do not want to get telephone assistance, you must call the PC manufacturer

• I am running Windows 7 Professional. Unable to connect, do not accept the password. Locked out! How to get back IN?

  The last time that I turned my computer off all seemed well.  When I turned it on, once again, I was unable to connect using the same password that I have been using since the user account has been created.  I can't sign with my accout used regularly (with administrative privileges) or my administrator account.  Whenever I try a message appears on the upper left side next to a small red circle with an "X" in the middle that says "Windows Security" white. And right below says "HRESULT 0 x 80074003.»  Why can I not sign? Why won't my password?  Please tell me that there is a solution. I have a lot of important things on my computer that I can't afford to lose.  When I tried to back up my system on an external hard drive, it would not even show up either of the two hard disks on the computer and apparently does not recognize external hard drive 500 GB.  He has always tried to save everything on the internal 'C' drive. Since there is not enough space to back up my system, I get a message saying that there is not enough room and choose a different disk and try again.  I need HELP BAD!

  The last time that I turned my computer off all seemed well.  When I turned it on, once again, I was unable to connect using the same password that I have been using since the user account has been created.

  I have a lot of important things on my computer that I can't afford to lose. I need HELP BAD!

  There are a lot of options built into Windows to help you out of this situation:
  • Restart the computer with your Windows repair CD, then use system restore to set Windows to a point when your computer worked well.
  • Log on to your account admin to spare, and then reset the password for your existing account (works only if you set up an alternative admin account).
  • Log in as administrator mode without failure, then reset the password for your existing account (the password is usually empty).
  • Insert your flash drive USB with the password key file (only works if you have taken the time to create such a key file).
  • Use the password indicator (works only if you have created a hint and if it's good enough to allow you to guess the password)
  • Check your paper files (works only if you threw down the password somewhere)
  On the documents, you cannot afford to lose: there are three groups of people.

  • The largest group: those who do not back up their important files or save them only once in a blue moon.
  • A small group: those who now save their files frequently because they have suffered a major disaster.
  • The smallest group: those who back up their files regularly because they prefer not to wait for the disaster to happen.

  There is a gradual migration from the first to the second group. The transition can be extremely painful. You can probably save your files this time but next time you may lose the lot unless go out you in the first group.

• I am unable to connect my system using the microsoft account.

  Separated from this thread.

  Hello

  Unable to connect to my system using microsoft account IAM. I forgot the password, so went online and reset it, try to connect with the new password still showing the error message "your pc is offline. Please sign in with the last password used on this C. P'?

  no idea about my old password and unable to connect with the new password too.

  What is the fix for this?

  Hi Deepika,

  Thanks for posting your query on Microsoft Community forum.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. Do you have any active account except your Microsoft account?
  2. Are able to connect to your e-mail you used as Microsoft account using the new password on the web?

  I suggest you refer to the following articles in order to retrieve your forgotten password.

  What to do if you forget your Windows password

  http://Windows.Microsoft.com/en-us/Windows/what-do-forget-Windows-password#1TC=Windows-8

  Note: When you reinstall Windows, make sure that you must back up all data.

  Return to your Microsoft account if it has been compromised

  http://Windows.Microsoft.com/en-us/Windows-8/get-back-blocked-hacked-account

  Hope this information is useful.

  Thank you.

• Unable to connect to sys giving the name of the database

  Hi all
  I can't connect to the sys user when you give the name of the database, but with no database name I can connect.
  
  [oracle@ccoshs02xvdbs04 path] $ sqlplus sys/passwdA123system@mps01dev as sysdba
  
  SQL * more: Production release 11.2.0.1.0 on Tue Mar 1 10:38:36 2011
  
  Copyright (c) 1982, 2009, Oracle. All rights reserved.
  
  ERROR:
  ORA-01017: name of user and password invalid. connection refused
  
  
  Enter the user name:
  ERROR:
  ORA-01017: name of user and password invalid. connection refused
  
  
  Enter the user name:
  ERROR:
  ORA-01017: name of user and password invalid. connection refused
  
  
  SP2-0157: unable to connect to ORACLE after 3 attempts, leaving SQL * more
  [oracle@ccoshs02xvdbs04 path] $ sqlplus sys/passwdA123system as sysdba
  
  SQL * more: Production release 11.2.0.1.0 on Tue Mar 1 10:40:06 2011
  
  Copyright (c) 1982, 2009, Oracle. All rights reserved.
  
  
  Connected to:
  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL > show parameter instance
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  whole active_instance_count
  cluster_database_instances integer 1
  instance_groups string
  instance_name string mps01dev
  instance_number integer 0
  instance_type string RDBMS
  open_links_per_instance integer 4
  parallel_instance_group string
  parallel_server_instances integer 1

  Purchase below and post result here

  sqlplus sys/passwdA123system as sysdba
  alter user sys identified by passwdA123system
  conn sys/ passwdA123@mps01dev as sysdba
  

  In this case if you can not connect then your entry mps01dev actually made another service.

• Unable to connect to 2wire922 in the Windows 7 computer.

  Original title: I can get on the internet but cannot connect to my 2wire922 I may change the setting on my computer by mistake

  I can get on the internet but cannot connect to my 2wire922 I may change my setting by mistake

  If so how can I change this back

  Hello

  1. you receive an error message or code?

  2 did you change on your computer before this problem?

  You can follow this link completely and check if the problem persists:

  Windows wireless and wired network connection problems

  Hope the helps of information.

• Unable to connect new devices to the network

  I have a WRT610N which does not allow me to connect all devices to the wireless network. He is a recent problem I was able to connect new devices before. Devices on the wireless network, those who have been on the network are able to disconnect and reconnect. That new devices are excluded. Went through the admin screens to see if something is wrong, but can't find anything. Any suggestions?

  Disable wireless security all the and try to connect with any temporarily.  Make sure that the MAC address filtering is DISABLED.  If you can connect now to go back and add the security on.

• Unable to connect to Debugger

  Hello

  the title is very clear I think... My Flashbuilder cannot successfully connect to the debugger. It's very strange because I've done everything in the office today... Here, everything works like a charm...

  Any ideas? Read a lot on google for this problem, but nothing seems to help. May not be a difficult thing?

  greetings.

  Hey,.

  the solution:

  Add vmware player (!) to the Windows Firewall... :-)

  VmAre (depending on the software) was still in the list, but the player was not... Boring, but maybe it will help someone else.

  Welcome.

• Unable to connect after update of the preflight IOS app

  Since the last update of the application of DPS preflight on iOS, I am unable to login to see the projects. I am able to connect to the DPS dashboard with the same username/password.

  What should do?

  Thank you

  Ulrich haha

  The app apple approved is not oriented to our production department. The dev team is aware and is working to solve this problem and get a new construction submitted to Apple for review.

• Tecra 9100: Unable to connect external monitor to the APR III Plus via DVI

  Hello
  I have a laptop Tecra 9100 that I try to use with an Advanced Port Replicator III (APR3 +) to connect to an LCD flat screen widescreen Dell via the DVI connector, but so far without success.

  All other connections on the APR3 + operate without problem, the monitor stir however not until Windows finishes loading, how it shows a totally white screen with black bars very close down vertically.
  I upgraded to the latest version of the BIOS and tested all the cables, but in vain. I also carefully searched from Toshiba Web site, but the only document which deals with taken ports supported on the APR3 + I can find does not list my laptop model at all.

  Please can you tell me if this mode of operation is supported and if it is how to enable it?
  Alternatively, if it is not supported, could I use a VGA - DVI cable to connect the APR3 + LCD flat screen?

  Concerning
  Ross.

  Hello

  I see that you have updated the BIOS. I think that it was not a bad idea, but you also need to check if you have installed the latest version of TOSHIBA Mobile Extension 3.
  I don't know if that helps, but please check.

  How to check the current version of TOSHIBA Mobile Extension 3
  -Select Control Panel in the start menu.
  S ' please click on ' Add / Remove Programs "from the control panel.
  -TOSHIBA Mobile Extension 3 for Windows XP V3.xx.xx.XP"appears in the list of software to ' Add or Remove Programs".
  -If the current version of TOSHIBA Mobile Extension 3 installed on your computer is V3.19.00.XP or more, please upgrade to the new version V3.21.00.XP.

  How to upgrade the TOSHIBA Mobile Extension 3 to version V3.21.00.XP
  -Uninstall the current version of TOSHIBA Mobile extension 3
  -Restart the computer.
  -Download the new version, unzip it by running, and run "Setup.exe" from the compressed file.

• Unable to connect data Explorer to the server InsightCM

  Installed InsightCM without error, connected to the cRIO-9048 and collecting data.  -machine x.x.x.2

  Data Explorer installed without error - machine x.x.x.3 InsightCM

  When to launch Data Explorer get a very bland pop error - up 'impossible to connect to the server of CM OR insight on ' - host name is the host of x.x.x.2.

  A. I executed the following this link http://zone.ni.com/reference/en-XX/help/374419A-01/cmanlsmain/server_connect/

  1. Ask a server administrator to check that NEITHER InsightCM Server is running.
  
  
  2. Make sure that you are connected to a Windows account with permission to access the server directories where NI InsightCM Server stores data files. To check this, ask a server administrator for the location of the network data files, and then try to navigate there in Windows Explorer.
  
  
  3. Ask a server administrator if the NI DataFinder server is running. If the DataFinder server is not running as a service, or if the credentials for the run as service at expiration, the DataFinder server stops and the data Explorer cannot connect.
  
  
  4. If an error indicates that the provision of the equipment is not configured, ask a server administrator to set the page of material available in the Systems Manager.

  B. I checked all the obvious places.

  1. low firewalls completely on the two hosts

  2. network connectivity between two hosts

  3 netstat - na | find "6342' on the hote.2 - it is listening.

  4. ...

  Looking for suggestions on how to troubleshoot (or point out something obvious, if I missed).

  Just need a log file or track of something with a little more substance other than the pop-up.

  Any suggestions are appreciated.

  Thank you

  Danny,

  I reinstalled as an administrator and can now connect to the server InsightCM.

  Thanks for the help and for the additional steps on how to ensure that the registration process is complete.

  Appreciate the prompt response.

  Thank you

  -Beck

• Unable to connect target RT in the LabView project

  Hello

  I use time LabView real-time 8.5 on a desktop PC. I see the target at MAX where I can change the network settings on the target and use FTP without problem. But it is impossible to connect to the target in a LabView project.
  The error of the target journal wrote:
  ####
  #Date: Monday, June 9, 2008 03:04:29
  #OSName: PharLap
  #OSVers: 13.0
  #AppName: PH_EXEC
  #Version: 8.5
  #AppKind: AppLib
  #AppModDate: 09/06/2008 06:55 GMT

  LVRT. DLL loads the address: 0x003EE000

  Can someone help me?

  Thanks in advance

  Hello everyone.

  The problem is solved! The reason of my problem is that LabView RT 8.5.0 supports no more than 2 GB of RAM installed on the computer, as described in this document.
  My RAM GB setting the things that were not possible before:
  -to connect to the target in a LabView project and deploy the code.
  -to activate the multiple core processor in the BIOS of the machine

  I said that the withdrawal of the USB keyboard is useful. Indeed with my keyboard plugged in, when I install other software as server VISA for example, MAX do not recognize the target automatically, I have to add it manually by specifying the IP address and I can not connect to the target in a project of LV.
  Unplug the USB keyboard (and other devices) to solve this problem.

  Good day...