Sound of Z51-70 LENOVO fan (by clicking / singing)

Similar Questions

• g510 Lenovo fan noise

  Hi, I bought a lenovo g510 a few months previously, he worked very well until a week ago, when I heard a loud noise coming from the fan of the laptop as soon as I pushed the power button to start the machine, after a second or two, the sound went and the laptop starts fine, but a few days ago This happens again, now if I put my ear close to the fan I hear a noise level of the fan almost sound like a rattle of the rotation of the fan, very low however. I need to fix this problem or is not a big problem?

  Thank you.

  Hi Alisheikh,

  Normally, if the laptop fan is running, and a moment ago the angle of the fan change a little and can generate its minute, this is normal and it will not have any problem.

  Publish us back for other queries.

  Best regards

  Shiva Kumar

• G510 Lenovo fan problem

  Hello! I have problem with my lenovo g510 fan. When I play games the gpu (intel hd4600) is approximately 90 degrees Celsius and I heard the fan noise, but when I do the removal of dust in the power manager I can hear it clearly. Is there something I can do? I want the fans to be the most effective they can be, and I don't mind if the noisy fan.

  Thanks for the reply!
  Running the utility to remove dust permanently did not help so I decided to buy a cooling pad. Thanks for the help!

• Lenovo fan own u400

  Is there some manual or tutorial to clean a lenovo u400 fan. After 9 months of using one, it starts to become very noisy and its overheating.

  Thank you

  Hi Blitit,

  U400 Service training video...

  http://service.Lenovo.partner-management.com/content/CourseWarePublic/6578/player.html

  How to open hood rear...

  http://forums.Lenovo.com/T5/IdeaPad-Y-U-V-Z-and-P-series/help-in-choosing-HDD-Upgrade/m-p/739463#M54...

  Zehn

• G780 Lenovo fan noise

  My laptop fan made a lot of noise lately, I checked already a lot of forum, if I already checked the easier solutions. I removed the dust of my fan (there is almost no dust!) I checked my CPU for portable use, this is about 3%, is not because the CPU is overheating. It starts just making a lot of noise for no apparent reason, in my opinion. What can I do? should I just install a new fan? In my opinion, my fan is in good condition, as far as I can tell.

  The only reason why my laptop heat keeps the fan running all the time.

  My computer does not detect any problems. But the noise is really irritating.

  Thanks for the support.

  Temperatures look good, so this isn't a problem.

  If the fan made this kind of noise then it must be replaced.  Not quite sure about what Fan / Heatsink heat your model contains as the guide indicates the possibility of 3 it might be.  Your fan should have a part number FRU about it for better identification.

  An alternative is to buy just the fan only.  The fan can be disconnected from the heat sink and just replace it.  EBay is a good source for new fans.

• The speakers click when the fan starts and stops Equium A100-147

  I recently bought the 100-147 satellite and noticed that a click comes from the speakers (or headphones or external speakers) when the fan starts up and even when the fan stops. Sometimes it s quite remarkable, other times not so remarkable.

  Everyone can hear that click? If it's normal, I can live with that, otherwise I will return it for repair. Any comment please?

  In addition, it seems slow at startup and shut down. Put into service takes 2 minutes and 35 seconds, and stop to 33 seconds. Is this normal bearing in mind, it is running MCE? I have loaded additional software such as Itunes, Nero, Office 2000, Photoshop 5.0 etc.

  Thank you for reading.

  Clicking noise when the fan starts or stops turning is not uncommon. On my satellite a similar sound will appear when the fans begin to turn or the HARD disk starts to spin.
  Then worry about don t, I think its OK.

  The start-up procedure can take several times when a lot of applications and software to load at the beginning. Equium A100 seems to be one of the newer laptops, and I assume that different applications Toshiba load at the beginning.
  Also an Antivirus applications could extend the startup procedure.

  You might try testing something. Disable the antivirus of loading at the beginning and check if the laptop will start faster.

  It s even with stops. All background processes that are run in the context of the operating system should be closed until the laptop shuts down completely.

• With each mouse click sound

  each mouse click, I get a sound. I tried everything to turn off this function and rebooting my computer, m ais that nothing works. It is driving my crazy. Maybe I need to reinstall my Windows 7?

  I can't cut my sound. Each mouse click, I get a sound. Have you tried everythin, computer rebooted, none works. Help! It's driving me crazy!

  Hello
   
  a. don't you get the sound when you click in internet explore or anywhere in windows like windows explore etc. ?
   
  Follow the ateps below to turn off the clicking sound in Internet Explore.
  1. click on the Start button in the Windows 7 menu bar.
  2. on the start menu, click Control Panel.
  3. in the Control Panel dialog box, click hardware and sound.
  4. on the hardware and the sound dialog box, click change system sounds.
  5. in the sound dialog box, use the scroll bar until you see the event entitled: Start Navigation
  6 click on Start Navigation
  7. in the drop-down list select None sounds
  8. click on OK
  That's all. Your nattering of Internet Explorer (IE) should now be disabled.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Lenovo D20 GTX 1080 SC plus Random closures - also, what are these thermal sensors?

  I have a Lenovo D20 workstation, I upgraded my GTX660 to a GTX1080 and started having some weird random offs of the power system.

  I bought the card on October 21 to run Civ 6 better, fine installed map and ran for three days without any problem.

  The third day, the system itself off the power run game. No BSOD, no warning of any kind, just don't click off.

  Done a lot of troubleshooting and seemed to track down for a thermal problem, because once I did a full clean and system fans and back together, everything worked...

  Flash forward another 2 weeks, mid-game Civ 6, stop at random one another down. System still clean as a whistle...

  It's now a battle since to maintain the system for more than a few days sometimes for a few minutes as it will at the same time more and more.  Last hour of Gears of War 4, exactly the same task.  Thinking it is thermal, I upgraded to something bigger heatsinks (fans work normally same towers / etc), system is now 20 degrees cooler and I still get the random low stop...

  Thought that's current partner, if I traded in my PSU I have for my box of spare prod... No effect.

  Thought the card was dead, so I traded in my old GTX660, the system worked flawlessly...  Swapped the D20 1080 another that I have here, and it worked perfectly fine solid launch an automated Civ game 3 days...  Swapped the 1080 in my D20, worked for another 3-4 hours, then click power off.

  I continue to roaming to heat I have some temporary sensors which seem to put the wrong mistakes, I have one that always is at about 128C called "Remote1" 2 other D20, I have here do not have this sensor, I literally stripped everything out of the box and the sensor "remote1" remains.  Where is it?  (see attached photo)

  HW_Monitor shows my CPU nice and cool... SpeedFan shows a CPU @ 31 c and the other at 101 c, the two seem well in HW monitor. Am I an overheating? OR am I not?

  Here is my complete listing of the system:

  D20

  2 x X 5675-3, 06 Ghz

  48 GB DDR3 RAM

  GTX1080 HC 8GB

  LSI/3ware 9650SE RAID card w/5x3TB

  Kingston 240 GB SSD (boot drive)

  I did the following diagnosis:

  Added new radiators - thermal. (Works great with GTX660, not with the 1080).

  Re-sitting all the RAM, I even changed a lot.  Memtest passes.

  I removed the RAID card and associated hard disks. (I thought that's where they get "Remote1".)  It isn't.).

  I tried the two 16 x slots in the system.

  I ran a full stress test using the handbrake and P95 to try to make the system draw as much power as possible to stress the CPU/PSU/MEM, wanted to test the GPU at the same time so I ran a civ 5 automated and civ 6 interactive game. It ran for several hours and clicked itself turned off AFTER I had finished the stress on the CPU... (I killed the brake hand and P95 and just got Civ execution).

  I swapped the power supply with a known good unit.

  I placed the 1080 in a solid known D20 chassis, no problem.

  I checked the mobo for swelling / leaks / breath caps. No there that I can see.

  I ran the sound system high mode and fan speed used same used maximally all fans, always off System... All time seemed cool except "Remote 1". Read local 66 c.

  I changed the bars that I use.

  I changed the wall outlets that I use.

  I entirely cleaned the system and all associated fans.

  I tried ALL video pilots...  I have done so of restorations and clean installs Windows bored me.

  Windows provides no newspaper except to say "power has been removed from the system or the system became unresponsive.

  BIOS is like a power failure and will reboot the system (once I put it to turn on automatically).

  I'm at the point where I'm going to empty the entire chassis and start over again because its so intermittent and so random that I can't pinpoint the problem.  When you look at Speedfan, the a 'CPU' that says its 101 c, when he goes to 110 c, that seems widely when the system will be eager to stop, he stopped at a few times and 115C, but HW_Monitor still reads the CPU is also nice and cool, with cores running between 35-40 degrees Celsius, not anywhere near 100 101 c...

  I spent several hours on it and still can't seem to find answers that are concrete...

  Someone at - it ideas?  Someone has ideas on what/where all these thermal probes are?

  Can someone give me any ideas would be great...

  Hello

  First of all, thank you guys for getting back to me so fast, I know that you guys must be flooded and I really appreciate your support on my aging material.  You are a credit to your teams.

  So I'm in the mode full tinker now, and as I am not under warranty, it is not as if I had nothing to lose = D.

  I think I have tracked down the problem - but I said at least 6 times in the last few weeks.

  The EVGA GTX SC 1080 has a metal radiator that runs the length of the card, these fins are exposed along the law and the length as a vent along all sides of the map, the side exposed to the door frame and the side which is exposed to the motherboard. There are also a few air holes in the top (bottom?) of the map. When the GTX 1080 is seated in the slot 16 first x, all the heat from the back of the card is discharged directly on the North Bridge heat sink.  This seems to be what it heats up a lot, and why the 660 fact ever, the events don't go anywhere near him.   In fact, I removed my GPU right after a stop down and the NB heatsink was hot touch was a 3 degree burn.

  so I tied a 40mm fan on the heatsink to the Northbridge PCI, he turns to 4000-5000 + rpm and managed to cool the heatsink about 30 degrees, it starts as 65 degrees rather than 95 and revolves around 82-85 under a load of game...

  I'll keep you posted on the tests.

• My speakers and headphones produce distortion whatever I play (music, videos, sound system).

  Original title: audio disturbances

  Hello

   
   
  I use lenovo T420. with windows 7 32-bit and processor intel core i7.
  My speakers and headphones produce distortion whatever I play (music, videos, sound system)
  I ve recently spilled water on the keyboard water resistant but I don't know if it has anything to do with it.
  Kind regards
  Malik Majali

  Hello

   

  Method 1: Run the following fix - it:

  Diagnose and automatically fix problems of Windows audio playback:

  http://support.Microsoft.com/mats/AudioPlayback/

   

  Method 2: Uninstall and reinstall the audio card drivers.

  See the following steps:

  (a) click Start, right click on computer.

  (b) click on properties, click on Device Manager

  (c) expand sound, video and controleurs controllers game, right click on the wireless adapter option

  (d) click on uninstall

  (e) now go to your computer / site Web of the manufacturer of the device, download the updated drivers and install them.

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/is-is/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• [3000 N500] Disable system sounds

  I hope this isn't a double post

  Please advise on how to disable the sound system on a Lenovo 3000 N500. I'm making reference to the very annoying "beep" to the critical battery power or plug / unplug the AC adapter.

  I disabled all the sounds in the CP of Vista, but it does not solve the problem.

  Thanks in advance

  It worked on my Lenovo 3000 N500:

  In 'Control panel', open 'sound', and then in the Strait, in the "Play" tab, double-click the icon "speakers". This will open a 'the speaker Properties window. Click the "Levels" tab and it will show two fields, speakers and PC speaker, click on the small speaker for pc speaker icon and it should show a circle with a slash through it showing that the pc speaker is disabled. Click OK or apply depending on what is highlighted.

  billsite34

• change keyboard clicks ios10

  Hello apple support.

  When I update my iPhone to iOS10, the keyboard click sound changes. Instead of a normal "click", it is now producing a punk sound.

  Is there a way to change the sound back as iOS9?

  If this is not the case, can I change my iphone to iOS9 again?

  Thank you very much.

  With sincere friendships.

  William

  Hello, masterwil!

  Please bring your question to Apple Support communities!  I'm happy to help in any way I can.

  You are right, that the clique of keyboard are different in the iOS 10.  While it is not a way to restore the 'click' sound from iOS 9, there is a way to disable the clicks completely.  Please go to settings > sounds and scroll all the way down.  There you will see the toggle switches that allow you to turn both the new keyboard clicks and the new sound of locking in iOS 10.

  Have a great week!

• No sound after installing windows 10

  I installed Windows on a PC with windows 8.1 10 and now no sound.  I have to download new drivers?  ?????  Thanks for your help.

  Hello

  This could be one of a few different issues. First, we will check your drivers.

  • Open Start, type Device Managerand select it in the list of results. Under sound, video and game controllers, select your sound card, open it, click the driver tab and select Update driver. If Windows can't find a new driver, search for one on the device manufacturer's Web site and follow their instructions.

  • If these steps do not work, try to uninstall your sound driver: open the Device Manager, right click (or press and hold) the audio driver, and then click Uninstall. Restart your device and Windows will try to reinstall the driver.

  • If this does not work, try using the generic audio driver supplied with Windows. Here's how: in the Device Manager, right click (or tap and hold) your audio driver > Update driver software... > Browse my computer for driver software > Let me pick from a list of drivers for devices on my computer, select the Device high definition Audio, select Nextand follow the instructions to install it.

  If you're still having problems after trying these methods, we will try to run the audio Troubleshooter.

  Keep me posted on your results!

• HP pavilion g series: no sound through the speakers

  If the laptop is showing all the drivers etc are correct and it works even shows her on the equalizer with the background of the right speaker symbol However im not receive no sound at all

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp59001-59500/sp59154.exe

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When finished, stop the laptop.

  Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When windows has reloaded, open your download folder, right click on IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, reboot the laptop and let windows load completely for a few minutes before checking.

  Kind regards

  DP - K

• HP ENVY 15-j119so: no sound on my computer

  
  

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the AMD graphics software at the following link (the reason for this is the software package will also reinstall the Chipset drivers)

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63449.exe

  When reinstalling the AMD software is finished, stop the laptop.

  Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When windows has reloaded, open your download folder, right click on IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, reboot the laptop and let windows load completely for a few minutes before checking.

  Kind regards

  DP - K

• Spectrum of HP: No sound

  Hi guys

  my computer has just made an update, and I have no sound at all! It's already happened, but I don't remember how I got the sound back. very frustrating as the icon of audio B & O you cannot change all of the settings, when you click on listen nothing works and it does not recognize when you plug in headphones

  any advice appreciated

  Lyndall

  Hello

  Try the following.

  Download Conexant HD Audio Setup on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp77501-78000/sp77502.exe

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right-click the Conexant device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp74001-74500/sp74132.exe

  When the reinstallation of Chipset has completed, restart the laptop.

  When windows has reloaded, open your download folder, right-click on the setup of Conexant and select "Run as Administrator" to launch the installation.  When he finished, restart the computer again and let windows to load completely for a few minutes before checking it in.

  Kind regards

  DP - K