Unable to connect TV to new router

Similar Questions

• Unable to connect to my new router cable, my XP and Windows 7 machines

  Vista, wireless router Netgear, no link, please help

  No matter what I try, I can't connect to my new router cable, my XP and Windows 7 machines work fine but the Vista laptop are it. Have searched the web, looked at this site and the forums, but nothing does not jump and helps me solve the problem. I use a HP Pavilion DV9000 laptop, all service packs updates and so forth... any ideas?

  I suggest that you contact your ISP and get their help in setting up the Vista machine so it connects properly.  They know the right settings for the access provider, while we do not have and that there may be something else you need to do with Vista which is different of the other two systems (and hopefullly the ISP will also know and be able to talk you through the process).  I call my ISP all the time and they are VERY useful and have ALWAYS resolved any problems, I called (even if sometimes he had a visit from a technician).

  If the ISP Can ' t/don't/can't help you, then after coming back here and we'll try to go through it step by step, even if we cannot have all the information we need.  But I am sure that they will be able to help you more quickly and more effectively and with greater chances of success.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Impossible Windows 7 computer upstairs to connect to a new router that I just installed. It worked fine before.

  I changed ISP and changed my wireless routers. My computer laptop windows 7 connects perfectly, no problem. Cannot connect my desktop computer which is on the floor. IF I take my laptop it it works fine. I changed the settings secure to unsecured and it connected correctly. When I changed this back in would not work again.
  It says that windows is unable to connect to my router. I have reset my modem and router and it continues to happen... What can I do?

  original title: unable to connect to the wireless router.

  Hello

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• OfficeJet 6600 e-all-in-one: Wireless connectivity with the new router problem

  We had the printer since 12 months, workin with no problems.

  Just got a new modem/router (NETGEAR V7610) installed as part of the NBN implementation and I can't get the printer to connect to the new router. 5 and 2.4 G active networks. The two defined newtorks on security WPA2-PSK [AES].

  The printer detects the wireless (2. 4 g) network, but can't coplete the connection. Tried the two direct input the network key and using WMA.

  -The display panel shows "wireless invalid password (WPA) is entered.

  -The results of network printer test page indicates a FAILURE on safety.

  I was able to connect to multiple other devices (laptop, iphone, Kindle...) without any problem. Used the two direct entry of the key network and WMA.

  Anything else I can try?

  Find a new update of the firmware for the printer (May 9, 2016).

  After you apply the update, the printer is able to connect to the new modem.

• I have an Adobe Creative account and my payments come out every month; However, I am unable to connect with my new account or access programs I have installed; It only let's login me under my old account. Can someone help me solve this problem?

  I have an Adobe Creative account and my payments come out every month; However, I am unable to connect with my new account or access programs I have installed; It only let's login me under my old account. Can someone help me solve this problem?

  Hello

  I see that you have an adobe account with the same email with forums, however, I don't see no subscription under this account.

  If you can't change the email during indexing, see the steps below:

  The OOBE and rename it OOBE.old and then try to connect with the correct ID:

  Location: -.

  Windows C: \ directory users\ user account-App data-local-adobe \oobe

  MAC: Go / go to the folder / Application support / Adobe / oobe

  If nothing helps, please contact adobe support:

  Contact the customer service

• HP Deskjet 3510: Cannot connect wireless with new router

  I got a new modem with router wireless integrated into my cable company.  Now, I am unable to connect wirelessly to my printer. He seems incapable of finding new wireless information.  The closest I could get the printer screen advised to 'hold the WPS button. '  However, my cable company has confirmed that the WPS NO button there and is not an option.

  Can someone help me get my printer working again?  Thank you!!

  @LisaC11

  Printer:

  E-all-in-one printer, HP Deskjet 3510 range

  Full software features:

  File name: DJ3510_1315 - 1.exe

• Satellite Pro 6100 - unable to connect to the WLAN router

  Hello

  I brought a 2nd hand Satellite Pro, model version SP6100 (PS610E-029ZV-EN), P4 1.7 Ghz, 512 MB, 30 GB, with Windows 2000 Pro loaded.

  I can't connect to my wireless router. The switch is in the correct position.

  I want to change to XP using the key provided with the new laptop (dual OS) however I can't reformat using a XP disc at the start up or if I use the recovery cd (start with holding C and let go when he works up) it starts but displays 'specification drive not valid' three times and charges Win2000.

  Can someone advise how (or if!) Can I reformat I want?

  Any help will be greatly appreciated.
  See you soon.

  Are you sure that the wireless network adapter has been installed in the laptop?
  Check in Device Manager

  On some series WLan is optional. This means that the WLan card is not installed, but it is possible to install an and, consequently, the laptop contains the WLan switch.

• Satellite A105 - unable to connect to the wireless router more

  I had the success of connection to a router Wireless Linksys for the last few months. Today, that I couldn't connect to the Linksys still another. A few times I have to connect to the Linksys router, but I got a weak signal so I would be disconnected. The green bars on the router Linksys under available networks are all solid green full bars, but I can't? t connect.

  To do or check to login once more?
  Thank you

  HM, you will need to do some research! What was the last you´ve installed applications? Installed new drivers/tools/software on your computer?
  If not you already installed the latest drivers for the chip wireless for your laptop? If not already done, then try it and Don t forget to update BIOS. :)

  If anything brought success then just to give a few comments. :)

  Welcome them

• My HP shows it is connected to the new router, but does not connect to the internet. How should I do?

  I have a HP G60 Notebook PC with Windows Vista Home Premium, it is about 4 years old. I recently got a new Cisco Linksys E1500 wireless router, which is connected to my home computer. My laptop shows that it is connected to the home network, but it does not connect to the internet. Other laptops in the House are able to connect to the network and to the internet. Mine seems to be the only one not working do not. Why it is not working? What should I do about it?

  I ran the network diagnostics. It is said "a problem with you network router or modem broadband could prevent an internet connection." I have disconnected these two and tried again. It did not work! I have also connected my laptop directly on the modem and it does not always connect to the internet. I tried to reset the network card. My IP settings are set to automatic.

  My internet connection was not a problem before last week (when I got a new router). What is the problem with my computer? Help, please!

  Hello:

  If you have an Atheros wireless adapter in your PC and you have not updated the driver, I recommend that you install it.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-99392-1&mode=3

  Wireless adapters Atheros with former pilots, dislikes the new Linksys routers.

  If you have an Atheros wireless card, and your wireless driver is more than 2 years, I am very confident that this will solve your connection problem.

  Paul

• Unable to get online with new router-"Local access".

  Original title: can't get online with new router.

  I'm having a lot of trouble to get online with my laptop.

  My roommate has recently got a new EE Brightbox. It works perfectly well with his laptop and mobile phone. Also works with my mobile phone. However, when I try to use my laptop it only gives me "Local access". I have no problem connecting to the router, but it just won't let me go online.

  Tried to disconnect/reconnect the connection Wireless on laptop from scratch with wired connection to router, router and router reset re-booting. None of them have worked.

  Any help would be great?

  Laptop works on Vista.

  Hi Rob,

  Thanks for the reply.

  Have you tried methods of resolution of the problems mentioned in the previous answer?

  Please update the State of the question, we are here for you help!

• Problem connecting to the new router

  When we all first our WVC54GC Setup was quick and easy, and we used it without event for 1-2 years. Now, we have replaced our old router with a WRT610N. Everything else, wired and wireless, connected to the new network without event after I have updated their SSID settings and security. (A new uses WPA - WP2, the an old WEP) but for this camera I can not to do. I read the articles on this page and plugged all the correct settings, but it still won't talk of it in wireless mode. (With a cable that is no problem). What I'm missing here?

  You must be identical on both devices wireless settings to establish communication between your router and the camera... Ensure that your camera settings Wireless 2.4 GHz of your router... Try Basic WEP security and see if that works, if WEP works you can change security to WPA... Once you have set matching the wireless settings, unplug the cable ethernet and power cycle the two devices and see if you can see your wireless camera...

• Unable to connect with the modem router e2500

  I have an old Speedstream 5100 modem hooked to my router e2500. Everything works well except if for any reason any my modem disconnects from the ISP I can not log in via the route to reconnect it. I need to connect a cable modem to computer direct run connect script then modem plug in router all is well again.

  Any ideas why the connection to the modem router is blocked?

  Thnaks,

  Al

  al_mathews wrote:

  My Speedstream has only an Ethernet connection so I did not know that he resembled a router for the local network. I changed the mode of bridge on the PPoE configuration on e2500 / Speedstream and reconnected to the ISP on the e2500 configuration screen. Who can solve the problem of reconnecting from now, it is run on the e2500.

  One thing I see now is since I left the modem IP set to 192.168.0.X can't do it all through the e2500. Is it because my DHCP in e2500 is configured with 192.168.1.X range IP modem is not covered in my network? If I directly connect Speedstream and place you IP 192.168.1.X will become visible on LAN?

  You are unable to access the modem even if you have a PPPoE connection. For PPPoE the E2500 will not need an IP address from the modem so it does not have DHCP on WAN port and so we never see. When you try to access the address of 192.168.0. * the E2500 it will route through the tunnel PPP to the ISP.

  If you connect your computer directly to the SpeedStream it should automatically get a DHCP address (assuming that the computer is still ongoing on the DHCP protocol and not with a static IP address and the SpeedStream does not automatically neutralize the DHCP server in Bridge mode). If you have configured a static IP address on the computer, you must change the IP address to an address of 192.168.0. *.

• 3050 printer all-in-one - connects to the new router?

  Hello

  I just got a new router installed and since can't get my Deskjet 3050 to a wireless connection.

  I tried to go into the router setting and adding via pin and WPS button but no work

  I tried the part configuration of the HP set up in my Mac, but only crashed every time so I uninstalled the printer and re downloaded. However he now does not have as an Application, but I can still select in sub printers, but can only print via cable Wi - Fi and not

  Help - very frustrated

  Thank you

  It's weird.  Try disconnecting the power to the printer without turning off first.  Unplug the unit from the rear of the printer and omit the cable for 30 seconds.

• Unable to connect to the netgear router, it says failed to connect check connection

  Original title: netgear router

  Im trying to connect to my netgear router a TI repeat check connection failed to connect, but I can go on the internet. He began to do after I changed the channel on the router one moment I can reconnect you to fix. or go to the web page on the internet to solve if someone could help me that would be great.

  Hello

  1. What is the model No. the Netgear router?
  2 have you tried to login using the different browser and check?

  Check out the following link and check if you can access the router page.

  
  

  If you are unable to log on to your router

  http://KB.NETGEAR.com/app/answers/detail/A_ID/1097/~/if-you-cannot-log-on-to-your-router

  Alternatively, you can contact Netgear support for more details:

  http://forum1.NETGEAR.com/

  If you have any other questions, answer here and we will be happy to help you.

• Connection to a new router with WPA2 Personal

  I recently had to buy a new router - a Linksys WRT610N. It uses WPA2 Personal wireless security settings. I can't connect to wifi with my Palm T / X I have the latest version of Enterprise installed, but it is a home connection. I can't downgrade my WEP security - is there a way for it to work? Thanking all in advance...

  Oh happy day! Using the checklist as suggested work - changed from mixed to B/G setting on the router and all of a sudden, it was my network, plain as day, on my T / X - a few insertions of password and I am strong. I don't have the download of the company on my T / X and I had to go home in two other devices but it is a painless procedure otherwise. Thank you, once again. I should add that Linksys support gave me 2 different answers, a flat-out "No way." and the second "you will have to change all your settings on each device-good luck!  (not very encouraging). Palm phone support wasn't better "can't do" - I did not pay, of course.

  I'm passing this because I have an "instinct" that, despite all the negativity, I read there are some VERY bright, helpful people there voluntarily helping each other.  I hope that this post will encourage the other NOT to give up.