Unable to connect to Internet through router WRT400N.

Similar Questions

• Linksys router WRT54GL is unable to connect to internet through motorola sb4200 modem

  Hey there,.

  I'm having trouble connect Router wrt54gl wireless to a motorola sb4200 modem. It is intended for dhcp automatically connect!

  but no luck so far!

  any help much appreciated!

  Thank you

  Martin

  You said nothing about the netgear. In this case you don't probably have internet either if you connect your computer directly to the modem.

  As I wrote before: the ISP is blocking your internet connection on the device that you have connected before. If it is the netgear you clone the mac address of the netgear. It must be printed on the netgear.

  Otherwise try to reset the modem. Or unplug it from the power supply and wait a few minutes. Then connect the router to the modem. Turn on the modem and once it is turn on the router.

• WRT54GS - no internet connection is detected and yet my computer cable to connect to internet through router

  I had my router for a little over a year. I am connected to a wild blue satellite modem. He has worked without problem for a year.  Now, he claims not to detect an internet connection, even if the computer connected to the router has no problem connecting to the internet. I just can't connect wireless to the internet because the router thinks that there is no internet connection. I have reset several times, turned on and off the power to the modem, followed all the troubleshooting instructions. All the lights on the modem and the router. I need to replace the router, or I would encounter the same problems with a new?

  If you use the update 1.6 LELA LELA 3.0 and your problem will be solved.

• I have a SBS 2011 and cannot connect to internet through VERIZON FIOS.

  I have a SBS 2011 and cannot connect to internet through VERIZON FIOS. The SBS is unable to detect the IP address and gave an error message. I never get to a screen that allows me to type in the "IP address of the router" or "IP address". Verizon told me that their router address is "192.168.1.1". After a new trial, I added my NETGEAR FS105 switch between the FIOS router and my PC 2 and SBS. Result - conflict of addresses of servers.
  Any suggestions or solutions to this problem?

  Thank you
  Chuck

  Hi Chuck

  Your question is addressed in the Microsoft Answers forums.

  Please ask your question in the following forum.

  Small Business Server Forum:

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  Concerning

• On my iMac running training camp. I get a message saying that my PC cannot find the wireless hub and it is unable to connect to internet Explorer. Help!

  Connection Wi - Fi with internet explorer 8

  I'm under Boot Camp on my iMac with OS 10.6.8. I am connected to the hub of my son-in-law over a wireless connection.  I can access the internet using Safari on the side of the Mac of the partition successfully, but I can't access the internet by using a wireless setup on the side of the PC of the partition by using Internet Explorer 8.  I get a message saying my side PC created by Boot Camp can not find the wireless hub and is unable to connect to internet Explorer.  Help!

  Hello

  ·          What is the version of the operating system running on your computer?

  I suggest you to install the drivers for the network card on the manufacturer's Web site and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  See: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

• My computer connects to the wireless internet, but I am still unable to connect to internet even though it is always connected to the wireless connection.

  connection Wi - Fi

  My computer connects to the wireless internet, but I am still unable to connect to internet even though it is always connected to the wireless connection. How can I solve this problem and what could be the problem?

  Hello

  1 did you change your computer, after which the issue started?
  2. during how long have you had the problem?
  3. what web browser do you use?

  I recommend to update your network card drivers and check if that helps.
  http://support.Microsoft.com/kb/283658

  Let us know the status of the issue and also please answer these questions.

• Cannot connect to internet or router

  Original title: Wifi problems

  I struggled to stay connected to the internet/router since I was at my aunt's House and their DSL guy used my laptop to troubleshoot internet problems here.  Any thoughts on what they were doing or how can I fix?

  Hello

  From the description of the problem, it seems that you can not connect to internet or router. I understand the inconvenience.

  (1) what exactly happens when you try to connect to the internet? You get the error message?

  (2) did you of recent changes to the computer before the show?

  Let us, perform the steps in the following article and see if it helps.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Please let us know the status of the issue after performing the steps mentioned in the article above. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards.

• Unable to connect to internet home with Blackberry 8900 for windows 7

  Unable to connect to internet home with Blackberry 8900 to windows 7, error = a network cable is not plugged in correctly or may be broken, tried a different cable, same problem?

  Hello

  1. are you able to use the Blackberry 8900 on any other computer?

  2 have had any changes made to the computer before the show?

  Please follow the steps in the link.

  Support for attached modem use

  http://btsc.webapps.blackberry.com/btsc/viewdocument.do;jsessionid=55C4DA5CE489E53E47CDDDB9FA0C6A59?externalId=KB05178&sliceId=2&cmd=displayKC&docType=kc&noCount=true&ViewedDocsListHelper=com.kanisa.apps.common.BaseViewedDocsListHelperImpl

  If you are still experiencing a problem, I suggest you to contact Blackberry support team for assistance.

  http://supportforums.BlackBerry.com/T5/community-corner/BD-p/corner

• Unable to connect to Internet in Firefox 33.0

  I just installed the FF33.0 update and I am unable to browse the Internet.

  I'll have to use a different browser on the same laptop to access this site.

  I have Windows installed on a computer 8.1 laptop i7. I connect via WiFi using my router broadband. The connection is good (checked and double checked). Can't even access my router through FF33.0 GUI.

  I checked the Firefox site and downloaded FF33.0 from there. Went through the process (update was chosen) and the same problem occurred.

  Hello, normally these problems are caused by a security/firewall software which does not recognize and therefore blocks the new versions of firefox. If please delete all the rules of the program for firefox to your firewall and let it detect the new version of the browser again.

  Difficulty of problems connecting to websites after Firefox update

• BlackBerry smartphones URGENT aid NEEDS! 'Unable to connect to internet.

  Hi, hoping someone on that can help me.

  I have had my blackberry of the flame for about a month now, I'm with vodafone UK and my rate includes unlimited internet access. I was able to use the internet very well until two days ago, when I got a message saying "unable to connect to the internet, please try again later" I contacted vodafone to this topic earlier in the day and they were quite baffled, told me that everything on my account seems fine and should work fine. The person I spoke made me remove my service books and you sign up again using host routing table. Finally after trying many other things (pulling on the battery, a soft reset, update my SIM Card.) removing books worked service!

  Now (after a hard reset I did) the phone displays the same message telling me I can't access the internet. I repeated the steps to remove my service books and register again, but it only allows me to browse the internet for a short period, until the message is displayed again?

  Everything works fine... Apps, Messenger, call, send SMS...

  Please if someone knows something that will help then I would be very grateful. (Also I did a full cleaning of the phone security - it did not help, the message was still displayed.)

  Hi & thanks for the quick response.

  After phone vodafone up (yet) I was put through to the technical support who told me able for them to update my card sim in order to correct the flaws that I needed to go into internet options, manual switch and choose a random network my phone is picked up (obviously don't pick up not vodafone). After confirmation that my sim card has been updated at the end there I then switched back to automatic in my internet settings and it told me that I have to turn off my phone and take out the card battery & sim for an hour.

  After all an hour and a half, that I decided that I had left the phone long enough & tried to access internet when, surprisingly it worked! (and it's still working fingers crossed).

  Once the phone was back on I received notifications informing me I was registered with the network and I should start to receive email & tel in no time... I did!

  So for someone who is having the same problems or similar, I suggest the ringtone to the top of your service provider and asking them to update your sim card!

  Thanks again for your response, I hope my phone WORKS now as I really like my Blackberry Torch

• Satellite L500D - unable to connect to the WLAN router

  Hey all,.

  Hoping that someone here will be more help. For some reason, my laptop won't connect to a wireless network today and it was working fine yesterday.
  When I troubleshoot I get: there might be a problem with the wireless network connection card

  I called belkin and the Lady reset our wireless under a new name which we I = didn t need that my roommate who has vista had no problems with his internet. When I connect the cable through my laptop, I have internet

  Now that I see there no button on my phone to activate the wireless it connected always automatically and the led is on.

  Hi Ren,

  In the wireless issues forum, you can find hundreds of discussions on different WLAN problems.
  Did you check that?
  I think that you will find your answer.

  According to your assignment on resets the router I think that it s properly configured. Check the router security options if the SSID is visible and then encryption and password. Also, make sure that the MAC address filtering is not enabled.

• Satellite Pro 6100: unable to connect to internet via wireless network

  Have had some problems with the audio device Yamaha for another thread, which now seems to be resolved. Thank you!

  However, do not know why, but now unable to connect to the internet via a wireless network, although the router works well as another computer in the House is connected wireless.

  When you check the available wireless networks it comes up with "no wireless networks were found in range, make sure that your computer's wireless switch is on.
  Where to check it, can anyone help?

  Thank you

  On the left side, there is WLAN switch. Make sure that the switch is in on IT. After doing this using FN + F8 key combination and activate WLAN device.

  After having done that, you should be able to see the WLAN networks available in your area.

• Unable to connect to internet via WiFi

  Hello

  I am unable to connect WiFi with my laptop. It displays connected to the router but the Red (X) between the router and the network. In the system tray to allow brand yellow exclamatory sign wireless. I am able to connect using my cell phone & macbook pro with WiFi, so there is no problem with the router. When I try to solve the problem using the windows feature, and then he said gateway is not available. I can connect to the internet using the cable & I can connect to the Wi Fi on different router but not able to find out why it does not connect with this router Xfinity?

  Here are the details:

  Laptop computer: laptop Compaq Presario CQ58 155SA
  Serial number: [personal information]
  Product number: B6K01EA

  OS: Win 7 64 bit

  Router: Xfinity Comcast

  Please notify. Thanks in advance.

  Thanks & best regards,

  REDA

  Say hello to new raj_sach.

  You have to call Comcast and ask another router.  This model is known to have many questions.

  If you take a look at the job for the router (click here), you can see that it supports up to Windows 7.  This means that all users on Windows 8 will have an update of the firmware (even if you have Windows 7, I wanted to report it).  ARRIS published an update that solves a number of problems with this router - but it will not work on the version you get from Comcast.  This means that Comcast will have to release their own update to solve problems.  You can see on this site on the site of Comcast that this router is known to have problems.

  You can see similar problems in this article and this thread.

  Contact Comcast immediately and ask for a new router.

  Have a great day!

• Unable to connect with the modem router e2500

  I have an old Speedstream 5100 modem hooked to my router e2500. Everything works well except if for any reason any my modem disconnects from the ISP I can not log in via the route to reconnect it. I need to connect a cable modem to computer direct run connect script then modem plug in router all is well again.

  Any ideas why the connection to the modem router is blocked?

  Thnaks,

  Al

  al_mathews wrote:

  My Speedstream has only an Ethernet connection so I did not know that he resembled a router for the local network. I changed the mode of bridge on the PPoE configuration on e2500 / Speedstream and reconnected to the ISP on the e2500 configuration screen. Who can solve the problem of reconnecting from now, it is run on the e2500.

  One thing I see now is since I left the modem IP set to 192.168.0.X can't do it all through the e2500. Is it because my DHCP in e2500 is configured with 192.168.1.X range IP modem is not covered in my network? If I directly connect Speedstream and place you IP 192.168.1.X will become visible on LAN?

  You are unable to access the modem even if you have a PPPoE connection. For PPPoE the E2500 will not need an IP address from the modem so it does not have DHCP on WAN port and so we never see. When you try to access the address of 192.168.0. * the E2500 it will route through the tunnel PPP to the ISP.

  If you connect your computer directly to the SpeedStream it should automatically get a DHCP address (assuming that the computer is still ongoing on the DHCP protocol and not with a static IP address and the SpeedStream does not automatically neutralize the DHCP server in Bridge mode). If you have configured a static IP address on the computer, you must change the IP address to an address of 192.168.0. *.

• Unable to connect to the netgear router, it says failed to connect check connection

  Original title: netgear router

  Im trying to connect to my netgear router a TI repeat check connection failed to connect, but I can go on the internet. He began to do after I changed the channel on the router one moment I can reconnect you to fix. or go to the web page on the internet to solve if someone could help me that would be great.

  Hello

  1. What is the model No. the Netgear router?
  2 have you tried to login using the different browser and check?

  Check out the following link and check if you can access the router page.

  
  

  If you are unable to log on to your router

  http://KB.NETGEAR.com/app/answers/detail/A_ID/1097/~/if-you-cannot-log-on-to-your-router

  Alternatively, you can contact Netgear support for more details:

  http://forum1.NETGEAR.com/

  If you have any other questions, answer here and we will be happy to help you.