Unable to connect to Skype's frozen blue screen

Similar Questions

• Unable to connect to Skype message when I try to log on to ipad or iphone

  Hello

  Although I can connect with my account on the web, I got a message on ipad or iPhone I try to connect "unable to connect to Skype.

  So where is the problem. ?

  Thank you

  After the test, the problem was not in Skype, in fact, Skype is blocked in Egypt on 3g even the USB data connections
  Thank you

• Unable to connect through SKYPE contacts

  Unable to connect to contacts through SKYPE

  Hello Samhrutha G,.

  Click on the link here on Skype on importing your contacts to use on Skype.

  If you have any more specific questions on Skype, please post in the Skype forum. Clickhere for a link to the Skype forum.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Unable to connect to Skype in Windows 8.

  Original title: Skype using the problem

  Sir when I connect my Skype account... After a few seconds, it shows that... hase of Windows has stopped working this application... and I am unable to use Skypeon windows 8...

  Hi Usmannaseer,

  Welcome to the Microsoft Community Forums and thank you for sharing your request here.

  I see that you have some problems with the connection to Skype in Windows 8.

  Let us work together to solve this problem.

  Please answer these questions so that we can better understand the issue.

  1. what is the exact error message that you receive?

  2 who represent do you use to sign in to Skype?

  3 this problem occurs with a Skype account?

  4 the issue manifests in another computer with Windows 8?

  Please get back to us with the results.

  Please follow these steps to change the name of the Skype folder.

  a. on the desktop, press Windows key + R to open the Run dialog box.

  b. type %APPDATA%\microsoft\windows\sendto and press enter.

  c. in the new window, look for a folder called Skype.

  d. rename it to Skype_old.

  e. restart Skype.

  Note: You will need your password to re - open a session and re - set all the default options.

  If the problem persists, please post this question on the Forums of Skype community.
  http://community.Skype.com/

  Please get back to us with the results.

  If you have any other questions about the Windows operating system, help us on this forum. We are happy to help you.

• Unable to connect to Skype

  Mr President, I am not able to connect to Skype from the last 2 days. My internet connection is working. I checked my firewall. There seems to be no problem with him. Help, please. I need to make urgent calls. Thank you

  Try to replace it with Google DNS.

  https://developers.Google.com/speed/public-DNS/docs/using

• opening of Skype call causes blue screen

  ORIGINAL TITLE: Urgent... Help, please... Blue screen

  When I'm about to open Skype call my laptop screen always turn blue, then I downloaded view blue screen then he told me that my driver is broken and he is ntoskrnl.exe, how can solve this problem the bluescreen on always keep coming and then restart. He said something as preparation to dump...

  Help, please. because I just brought this computer... Please help... How can fix the ntoskrnl.exe driver?

  Hello

  Check with the help of Skype and their forums, as it may be known issues.

  Skype - Support
  https://support.Skype.com/en-us/

  Skype - Forums
  http://Forum.Skype.com/

  ------------------------------------------------------------------------------------------------------------------------------

  Ntoskrnl.exe is a component of Windows which means than anything else he has led astray. More likely
  the root cause on top of my head are the WiFi (wireless) or network (wired) NIC drivers. Check with
  system manufacturer (manufacturer of motherboard for customized systems) or the actual manufacturers. (See
  driver update methods below.)
   
  ----------------------------------------------------------

  Pick up the pieces after a computer crash
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) for a second or less
  the time of the BSOD for more information on the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows details
  application of all accidents occurred in your system. The information breaks down is extracted from
  the wer files created by the Windows Error Reporting (WER) of the operating system component
  whenever an accident occurred. AppCrashView also allows you to easily record the list of accidents
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ========================================================================

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Vision like: FROZEN BLUE SCREEN

  My computer needs to be restarted after an automatic update (Kaspersky). On okaying the reboot, the computer restarts.

  It came with a blue screen and the message 'SYSTEM THREAD EXCEPTION' UNHANDLED

  After a second attempt, pulling on the power cord and wait about an hour, the blue screen came back with another message "WDF VIOLATION."

  I tried to restart, press the F2 key. I was taken in the "HP PC HARDWARE DIAGNOTICS UEFI" screen.

  A restart, using the F12 key has taken to "Please select boot device", but or "UEFI boot Sources" would work.

  Each gave the message "error: no boot disk was detected or the drive failed.

  I need help.

  I had to do a system recovery

• «"" Error: unable to connect to Skype "»»

  Spoiler (Highlight to read)

  Hi all!

  Hi all!

  I have a problem with Skype, even if im use for 2010, he never get this error.

  This time, it is showing an error called: "Skype cannot connect. Below is the image.

  Even you, the username and password are correct and verified. The account is accessible from the web page on Google Chrome!, but not from my laptop Dell, Windows 7, the Skype application icon!

  Kindly, suggest somethinggggggggggg... I really need to connect...

  Spoiler (Highlight to read)

  Thank you

  Thank you

  

  6.3.73.105 is much older than 6. version 14 . 3<>

  You must update your Skype.

• Unable to connect to Skype account.

  Original title: SKYPE

  I have problems logging back on my Skype account. I did a backup and recovery with no luck. Everyone HELPS

  Hello

  Thanks for posting in the Microsoft Community Forum. Rest assured that we would do our best to help you.

  Answer the following questions which would help us understand the issue:

  1. what exactly happens when you try to sign in to Skype?

  2. do you get an error message/code? If Yes, what is the exact error code/message you get?

  3. which version of Skype you installed?

  4. have you installed security software on your computer?

  Try these steps and check if that helps:

  Step 1:

  If security software is installed I suggest to disable the security software for the moment and verify if you are able to connect.

  Note: Be sure to activate or activate security software once you are finished with the test.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  Also to disable the firewall for the moment and check. To do this, visit the following link:

  http://support.Microsoft.com/kb/283673

  Note: Be sure to enable the firewall once you are finished with the test.

  Step 2:

  You can also post your query to the Skype forums in the following link.

  http://community.Skype.com/T5/English/CT-p/English

  Hope this information helps. Please do not hesitate to answer, we would be happy to help.

• Unable to connect to Skype last with Messenger account

  Hello

  I see that this has been asked before, but no matter how I search, I can't find an answer, so I hope someone will be able to help here please?

  For the last year I've been deliberately uses an earlier version of Skype as it was (and still is) a problem of signing in the last version of which was an old MSN/Messenger account. I get the message saying that my login details were not recognized. Then I found on this forum if I rode back to an older version of Skype would be all well... and it was... until today...

  I now have the question when I sign in I am disconnected back and said that I have upgraded (see photo). But with the latest version... I sill have the problem where they tell me my login details are not recognized.

  I have a true Skype account in my own name, but it is work related and I don't want to mix all the contacts. The one I use in my personal account was my old MSN/Messenger account and it was taken over by Skype.

  Help!

  I use a computer laptop Dell Latitude E6500 and Windows 7 Professional, I have four years and not had a problem until now.

  Why doesn't the latest version of Skype with old Messger login?

  Thank you very much

  Alison

  

  Try to reset all settings to Internet Explorer by default:

  http://Windows.Microsoft.com/en-us/Windows7/reset-Internet-Explorer-settings

• Unable to connect via wifi with iOS

  These days I was unable to connect to Skype when on any wifi. As soon as I turn off wifi and use my cell network signed in full. I have a 6 s iPhone running the latest iOS and versions of Skype. Anyone else having this problem? I tried to reinstall the software with no luck.

  Never mind... 3 attepnts later took an uninstall, force the restart of the iPhone and reinstall to get it working again.

• Cannot connect to Skype, Windows desktop application

  I can't connect to Skype Windows desktop App Win7, Skype 6.9.0.106. Username and password are good. I can log on with these on skype.com. Also I can log in using my address WP8 and hotmail.com. If I try to use my e-mail for loging hotmail.com address, this brings me to the name and password of user Skype page.

  Error: Unable to connect to Skype.

  6.9 Skype is an older version. All Skype versions prior to 6.14 are now disabled, which means that you can longer use the version 6.9. The version currently is 6.21. You must update your Skype.

  http://www.Skype.com/en/download-Skype/

• Unable to start - blue screen STOP: 0X0000007E

  original title: STOP: 0X0000007E (0XC0000005, 0X89B16963, 0X8B76B87C, 0X8B76B578)

  I was working on my laptop Acer Aspire and suddenly my restarted windows and then leave her unable to start and just show a blue screen with the error code as STOP: 0X0000007E (0XC0000005, 0X89B16963, 0X8B76B87C, 0X8B76B578).

  I tried to run in safe mode, then even I tried all the options available in the Advanced menu to restart that we get after pressing F8 but just fails. Repair of the system showed the error Impossible to repair in the same way his unable to restore and unable to start with last successful boot setting.

  Kindly let me know what to do I have lots of important data in my hard drive that I don't want to lose.

  Hello

  Unless the drive itself is completely fried the data on disk can be recovered by putting the hard drive
  in another computer as 2nd or a case of external hard drive using a USB connection - then the data
  likely to be backed up or copied to other media.

  Of course, the major problem is that the system does not boot even in Safe Mode.

  Setup/settings (BIOS/CMOS) often F2 so screen shows that it boots CD/DVD on the 1st in the boot order-
  Start with a Windows 7 disc and try the Startup Repair tool. Also, try restoring the system from there. (Don't forget to)
  Set the boot order to when.)

  Those who cannot not helped at all and will need you the help of a real computer store (no leeks and)
  Displays a BestBuy or other stores) or system manufacturer support.

  =================================================================

  Here are the usual methods to troubleshoot the bluescreens if you have access to some and still have a
  problem.

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top 3 answers.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  -----------------------------------------------------------------------------------------------------------------

  The system has RAID? If so, it is very suspicious.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-
  -------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Unable to connect to my profile at the start, the SCREENS ' SAYS the PROFILE SERVICE does NOT have the USER logon

  "Unable to connect to my profile when starting, SCREENS SAYS'THE PROFILE SERVICE does NOT have the USER logon"

  Profile of user could not be added

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Recent upgrades: KB2419640, KB976902, KB890803 when installed I can't start and get the blue screen.

  After that the installation of upgrades KB2419640, KB976902, KB890803 I'm unable to boot.  I get the blue screen.  I used chkdsk, memtest etc. No problem.  I disabled the upgrades to prevent settling.   I'm not comfortabel thereby.  Is there a solution?

  You are able to boot mode safe? If you can, do and run System Restore:

  To access the system recovery environment in Windows 7, simply start your PC, just before the system loads the Windows operating system. Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. You will see a new option 'Safe Mode', select this option and press 'Enter' on your keyboard.

  System Restore -Windows 7 features - Microsoft Windows

  After you're booted in Normal mode, click Start, all programs > Windows Update

  Check for updates, now updates you're experience problems with, each of them right click and click "hide update".

  If they are updated driver in particular, do not install them, hide them instead, any update of the driver offered, instead of this download directly from the manufacturers Web site.

  HowManage , Configure and troubleshoot Windows updates releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP