WRT54G V6.0 Web Based Interface question

Similar Questions

• WRT54GX4 - difficulties to access the configuration Page of the router Web-based

  WRT54GX4 - difficulties to access the configuration Page of the router Web-based.

  I have tried all posted to forums and knowledge for several weeks now with no luck.  I can feed the router to push and access the router's web-based interface, but only for a few minutes that she was leaving the loading to half way through and or does not load.  If I turn on the wireless side I can access the router at will without any problem. My warranty is almost over. I'm at my wits end. I would like to replace it under warranty if I can. (^ 8.

  Update: I fell up on top of the fix for my problem. After many reconfigurations over the past two months I've tried turn on all newspapers. Since the age of the newspaper I did have a problem of access to my router.

• newbie on getting interface question web work 3424 and 3448 (remailers)

  Hello - I'm over sale of this announcement because the situation has changed.

  We are a church and we try to expand our network.  the requirements are to install a public thread-access point (WAP) on port E1 and E2-48 ports to be part of a community for the Church Office staff.

  We do not want anyone on the E1 - WAP to access what anyone at the Church Office.   I have a configuration below script that works very well to meet our requirements, but as soon as I run one of the following commands, I'm more able to access the unit via a Web page:

  whenever I run one of the following commands:

  Switchport mode private - vlan community
  switchport mode private vlan isolated

  I'm more able to use Web page interface.

  Here is the script I used to set up our unit 3448 so far:

  Enable
  Configure
  interface vlan 1
  IP address 192.168.0.250/24
  output
  Default IP gateway 192.168.0.1
  username admin password admin level 15
  database of VLAN
  VLAN 1000
  output
  interface vlan 1000
  private - vlan primary school
  private - vlan community add 10
  private - vlan isolated 20
  serial interface ethernet e2, e4
  e2-48 ethernet serial interface
  Switchport mode private - vlan community
  switchport private vlan community 10
  e1 ethernet interface
  switchport mode private vlan isolated
  switchport private - vlan isolated 1000
  g4 ethernet interface
  switchport mode private - vlan promiscuity
  switchport private - vlan 1000 promiscuity

  with this script, I can continue to ping from any port E2 by E48 and no port 1.  I am also unable to ping any other port than port E1 according to the needs.   but I still need to be able to access the web interface of * ANY * port.

  Yes, that sounds like a good plan to use teamviewer to access it remotely. On the other hand love IE, the switch was released in 2005.

• missing components of the web-based configuration

  Hi all

  I have two controllers cRIO-9074 on my network, both with the OR-RIO 4.0 software installed.  When I open a web browser to display utilities 'OR configuration & monitoring Web-based', a cRIO not show four of the eight tools on the left side of the interface of Silverlight.  Missing the Console Remote File Browser, Web Server Configuration and installed the Configuration Tools.

  I would like for the user of this system be able to download its data files, every day or so using the remote file browser, so this feature would be nice to have. Any ideas?

  Kind regards

  Marvin Perry, DRESSED

  
  

• Satellite M40 - speakers with web based streaming

  Recently bought a laptop Satellite M40. Last week, I started having a problem with the playback of certain audio stream on the internet. Basically, you hear the audio OK, only comments and sounds high through the speakers or the speaker I use via a USB connection. Does anyone have an idea what may be the problem? (Note: CD playback is fine, the problem is audio streaming web-based). Do I need to install an updated audio driver?

  Thank you

  Garret

  Hello

  On this path, it is not easy to tell exactly what is happening, but the fact is that web-based streaming audio quality depends on the connection itself (connection speed). I put t know what connection speed, you have, but I noticed that the internet radio works on my laptop fine but if I want to watch TV Online I have the same problem. The sound quality is very bad.

  My DSL speed is high but I think that the server is probably overloaded and data transfer is not fast enough.

  Good bye

• ReadyNAS Pro 6000, no web admin interface

  Hi, I can not access the web administration interface of my SIN, all I get is a broswermessage saying "unable to connect", tried different browsers and factory reset have the device, without change.

  Any ideas on how I can fix this?

  Just got home from work sin, then there is nothing about this, just put in some old drives to see if she would go.

  Ping device response and I can get to the telnet connection.

  See that there is no data on this subject, you can try this:

  1. turn off the SIN

  2. connect the drives to your PC and delete partitions off them

  3. replace discs in the NAS and try another factory default.

• Possible security for the Web-based Configuration

  My colleagues and I found something very interesting today... Despite having configured the FTP security settings (which have been confirmed to set up and in funcitoning. I can't open an FTP session to our remote target without specifying a username admin and the password) If you open the configuration tool based OR web in a browser, you can send via FTP to and from the target using the file remote browser without being connected to all! Everyone knows this?

  Apparently, these permissions are separate from FTP, but you can define these special permissions on the page of the security configuration for the web-based configuration utility.

• HP3050a - will not print on the Internet Explore or any email is web-based.

  Here's the thing! My 3050 has is set up for the wireless. works great for any microsoft office program. Impressions like a dream. Works on all software for Iphone and Ipad. Wireless analysis. All fab. BUT it will not print through messaging on the computer web-based.

  It is now a network computer - one that is. I have a PC that has a HP1050 via USB which works a treat in all programs.

  I've updated the last IE web browser a few weeks ago, everything seemed fine then, but last week arrested two printers scan (rather the sweep feature missing from the pc). Charge both pilots as of the 1050's worked almost immediately. The 3050 took some back reset on the wireless - had evntually but every time now trying to print through the web-based e-mail I get a pop up that States:

  Error running scripts

  line 2072

  invalid error or agruement procedure call

  Code 0

  URL: res:/IEframe.dll/preview.js

  Regardless, if you choose to continue or cancell, that nothing happens - rebooted, reloaded, etc etc, but can't get the blooming thing to print from web-based e-mail. It used to work very happily but now... Help me please get really rather jolly cross!

  I bet that this is due to a conflict between IE 9 and your printer driver. The only real solutions must use another browser, or use a different print driver. I'll link the steps to assign another driver print below in case this is the solution you want to go with. I hope this helps.

  How to assign other drivers to print in different Versions of Windows

• 122 SPA - I can't config utility Web-based

  Hi, I am trying configure SPA 122. I already get IP using IVR and try to run the Web based configuration utility. But it does not work. Nothing happens if I type the IP in the web browser window and press ENTER. What you suggest to do? How to check if this phone adapter worksl?

  You want to in this web site from a computer connected to the local network (labeled Ethernet) or WAN (labelled Internet)?  You can only web inside from a computer connected to the LAN port.

  Via the WAN connectivity must be enabled everything first before it will work.

  If you connect your computer to the "Ethernet" port on the anti-terrorism Act and set it up to automatically obtain an IP address, it should get an IP of the ATA in the 192.168.15.x subnet and you should be able to the web in the device to 192.168.15.1 (NOTE - no 191.168.15.1 that you listed above).

  -Adam

• Web-Based Administration Tool

  HI - y at - a web tool for the 11g version of OBIEE to create a repository - if so, how can I access that he or... is the only option to install client side Admin Tool, as described in various documents.

  Thank you

  Hi user4044866 (time to put a real nickname),.

  As said Ebin is not an alternative to the heavy client Admintool or just move everything to the cloud as BIC is 100% browser based (but is not a true Admintool, this is a light version of it if you want...).

  Depending on what find you there are alternatives (and Christian Berg is the best placed to talk about when he introduced these functions at numerous events of the last year): via a TNA function call you can change DR., if it comes to an update with something, it's possible. I say, you can probably create things but honestly don't even try: 99.99999% of the time you will crash your RPD.

  If not, there is no Admintool web-based...

• How can synchronize photos lightroom lightroom office web-based?

  I wonder if I'll be able to sync pictures of light room based on the web for lightroom Office?  I'm new and thought that the web based one was the only one and has spent hours editing it... Now I need to burn the disc and can not understand!

  Hi carlyjophoto,

  Once you edit and save the Image on the web in Lightroom, it syncs the changes to the collection of funds as well.

  This process works based on real time

  Kind regards

  ~ Mohit

• Web-based data store

  Web-based browser data store and object managed by the Vmware ESXi host and vSphere with vCenter are not disabled, but according to the VM security consideration. This should be disabled\... ?

  Do you think all the risks inherent in it? given that we have implemented restrictions on user level...
  

  Hello

  If you plan to perform hardening of security based on the VMware Security Hardening Guide | United States

  There are 3 on the first sheet risk profiles:

  Risk profile 1: guidelines which will be implemented in high security environments, for example classified government or military, extremely sensitive, data etc.

  Risk profile 2: guidelines should be implemented for the most sensitive environments, for example those who handle sensitive data, those subjected to stricter rules of respect, etc..

  Risk profile 3: guidelines which should be implemented in all environments

  On the vCenter sheet, there are 2 hardening related to the data store:

  1. limit the data browser (risk profile 2 and 3) store

  2 disable the Web browser data store (see the risk profile 1)

  That which you ask here is number 2 Disable datastore Web browser that must be implemented for the risk profile 1.

  If your environment is under 2 and 3 then limiting risk profile permissions of browser data by user or group store should be enough, I don't think you want to turn it off.

  But if your environment or the company is a top secret government and military, of the extremely sensitive data, etc. then you can disable the web browser of data store

• Download VMDK files from the browser to the Web-based data store

  Hello

  I want to download the virtual computer VMDK file using the browser of the Web-based data store. I know how to do, but there is something I don't understand.

  I have configured my VM with a provisioning. From the VI client, I see that the size of the vm.vmdk is 4 GB.  The size of proviosned is 20 GB.

  Technically speaking, if I download the VMDK file, it should be 4 GB, however, from the browser on the vm - flat hard size Web-based data store is 20 GB... What is the standard behavior? Is there a way to download only the actually used 4 GB?

  Hello.

  This is the expected behavior, and as much as I know there is no work around if you use the browser to store data.

  Good luck!

• WRT54G V8 cannot connect to the web-based configuration page?

  Earlier, I reset my router and was able to use 192.168.1.1 to visit the configuration page based on the web while trying to restore a home network, now that I have a new computer using Windows 7 that can not use the easylink advisor. I was able to get on the page update my SSID and WEP key. But when my wireless devices were still having problems to you connect to the internet, I tried to go back to the page and found that I can't seem to connect, even if my office is able to connect to other websites very well.

  Anyone know what I can do wrong? I use Verizon DSL. I was able to ping to the router and all tests have shown that it was connected fine, but I still can't get on the configuration page and my laptop can't connect to the network. I tried to reset the router again and still nothing. And Yes, I went through several cycles of power. I have also tried to move if the network card on my computer, but the computer said it was impossible to create a card for him, although at the time I had listed as a home network.

  Wireless on 192.168.1.1 connections often fail.  Using the router configuration pages, always use a computer that is connected to the WRT54G.

  If the above does not solve your problem, so here are my other tips to see the router configuration pages:

  You don't need an Internet connection. 'web Pages' of the router are integrated into the router.
  Use Internet Explorer, it usually works.
  JavaScript must be enabled.
  Use a computer that is connected to the router.
  In the non-working computer, temporarily disable your firewall software.

  Point your browser to 192.168.1.1, and then connect to your router. Your username must be left blank. Your password is "admin" (without the quotes), unless you changed it.

  If you use Zone Alarm, do a right-click on the ZA icon in the taskbar (bottom right of screen) then click on "Shutdown ZoneAlarm" and see if that solves your problem. If this does not work, try the following with Zone Alarm: open the control center ZAISS, go to privacy, then temporarily disable Ad Blocking and Cookie Control and see if it solves your problem.

  Some Zone Alarm users reported that the addition of 192.168.1.1 to their address list "of trust" solved the problem. This trick can also work with other firewalls.

  If you use Noton Internet Security with the add-on Pack, don't forget to disable the blocker and ad blocker. Some users have reported that they needed to uninstall all Norton Add-on Pack.

  If you can not get anything to 192.168.1.1 then perhaps this is not the address of the router. Go to 'Start' > all programs > Accessories > command prompt.
  A black DOS window will appear. Type "ipconfig" (with no quotes), and press the Enter key. Look at the "default gateway". It is 192.168.1.1? Point your browser to the 'default gateway', can connect you to your router.

  If the above fails, unplug your modem router, then try again. If it solves your problem, then you probably a "modem-router" rather than a regular modem. A report with this problem and also specify the brand and exact model of your modem (not router) number.

  If all above fails them, turn off your entire system, unplug it from the wall, wait a minute, then lights up, then try again.

  If all the above tips fail, then reset the default router: power down the router and unplug all the wires. Wait a minute. Switch on the router, let it fully boot (1-2 minutes), then press and hold the reset for 30 seconds button, then release the button and allow the router to reset and restart (2-3 minutes). Turn off the router. Wait a minute. To connect to a computer, cable, a router's LAN port. Initialize the system.  The router should work, but you will need to configure your router again from scratch.  If you have saved a router configuration file, DO NOT use it.

  If you still have problems, then you must download and install (or reinstall) the latest firmware for your router. After the update of the firmware, you must reset the default router, and then configure the router again from scratch. If you have saved a router configuration file, DO NOT use it.

• WRT54G V3.0 Web Interface broken after FW update

  I meet the same web interface problem after I updated the firmware, like in the case below, but with my v3.0 WRT54G. The firmware file I upgraded to was WRT54GV4.0_4.21.1_US_code.bin. Will provide you with instructions and decommissioning file name so that I can use the web interface again? I did the steps of resetting, tried a different PC, but get the same problem of web interface. Thanks in advance.

  WRT160nV2 Web Interface broken after FW update. Registration date: 21/05/2009

  Yoohoo!

  Now I know why you have this nickname. Thanks for your help. Problem solved. Web interface works again.

  Must have been the tftp download from the link you provided because I used the same firmware upgrade (WRT54GV4.0_4.21.1_US_code.bin) file I downloaded and tried to install previously.