Unable to connect to View deal

Similar Questions

• Unable to connect to view Security Server 5.0

  Use vmware view client build horizon 2.1.0 1213173 (ubuntu 12.04 64-bit), when I tried to login (local network), I got timeout message

  I can connect if server connection hollow instead of security server connection

  one mistake that I find on security server is 33, SideBySide error

  no errors not found on the page of the web interface of the login server events

  Here is the output of scan nmap from client to server security

  from Nmap 5.21 ( http://nmap.org ) 2013-11-06 15:13 MYT

  Scan nmap for view.cnc.net.my (10.1.1.20) report

  Host is (0.00017 s latency).

  Not shown: 988 closed ports

  SERVICE OF THE PORT STATE

  53/tcp open domain

  80/tcp open http

  135/tcp open msrpc

  139/tcp open netbios-ssn

  443/tcp open https

  445/tcp open microsoft-ds

  3389/tcp open ms-word-serv

  49152/tcp open unknown

  49153/tcp open unknown

  49154/tcp open unknown

  49155/tcp open unknown

  49167/tcp open unknown

  MAC address: 00:50:56:87:35:FF (VMware)

  Do not check everything again: you cannot log in because you can't solve. It can be solved, either replace the connection URL in the configuration of the IP address instead of FULL domain name, which I do not recommend since the certificate cannot be based on IP addresses...

  When you receive a message "Server (null)", it is because the server name cannot be resolved by the client. The reason why you configure server security <->Server with IP addresses tunnel connection is because they may not be able to resolve the FULL of the other domain name.

  The PCoIP gateway feature is enabled on the servers of your connection? It may be useful if you send us pictures of your configuration (security servers and connection)

• Unable to connect to Adobe Content Viewer

  I'm unable to connect to Adobe Content Viewer to watch some InDesign templates. What should I use for my username? I tried my Adobe ID and also my name of the account holder. Not good. Whenever it comes up with 'authentication failed.

  Adobe Content Viewer is for the former work of Digital Publishing Suite.

  If you actually try to watch a folio, you must visit digiitalpublishing.acrobat.com, log in here and accept the conditions for use.

• View is not to connect to the event db and error unable to connect to the db

  Hello

  while trying to connect the event dB view, I encounter a weird problem where, by getting "unable to connect" error message.

  in the error log I get below error also can you pls help.

  TP-Processor1 > code [ConfigurationManagerBean] ADAM Error: 2 128 com.vmware.vdi.admin.ui.ConfigurationManagerBean.updateDatabaseConfiguration(SourceFile:181)

  com.vmware.vdi.adamwrapper.exceptions.ADAMServerException: database initialization failed, SQL exception when connecting to the database: TCP/IP connection to host failed. java.net.ConnectException: connection refused: connect

  at com.vmware.vdi.admin.be.ConfigurationManager.a(SourceFile:1703)

  at com.vmware.vdi.admin.be.ConfigurationManager.updateDatabaseConfiguration(SourceFile:1580)

  at com.vmware.vdi.admin.ui.ConfigurationManagerBean.updateDatabaseConfiguration(SourceFile:177)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:606)

  to com.vmware.vdi.admin.ui.common.ViewFlexFactory$ ViewProxy.invoke (SourceFile:113)

  to com.sun.proxy. $Proxy56.updateDatabaseConfiguration (unknown Source)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:606)

  at flex.messaging.services.remoting.adapters.JavaAdapter.invoke(JavaAdapter.java:418)

  at flex.messaging.services.RemotingService.serviceMessage(RemotingService.java:183)

  at flex.messaging.MessageBroker.routeMessageToService(MessageBroker.java:1400)

  at flex.messaging.endpoints.AbstractEndpoint.serviceMessage(AbstractEndpoint.java:1011)

  at flex.messaging.endpoints.amf.MessageBrokerFilter.invoke(MessageBrokerFilter.java:103)

  at flex.messaging.endpoints.amf.LegacyFilter.invoke(LegacyFilter.java:158)

  at flex.messaging.endpoints.amf.SessionFilter.invoke(SessionFilter.java:44)

  at flex.messaging.endpoints.amf.BatchProcessFilter.invoke(BatchProcessFilter.java:67)

  at flex.messaging.endpoints.amf.SerializationFilter.invoke(SerializationFilter.java:166)

  at flex.messaging.endpoints.BaseHTTPEndpoint.service(BaseHTTPEndpoint.java:291)

  at flex.messaging.MessageBrokerServlet.service(MessageBrokerServlet.java:353)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:723)

  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)

  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)

  at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:646)

  at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:436)

  at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:374)

  at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:302)

  at com.vmware.vdi.admin.ui.servlet.AMFProxyServlet.a(SourceFile:90)

  at com.vmware.vdi.admin.ui.servlet.AMFProxyServlet.doPost(SourceFile:57)

  Hi James,

  It's a SQL API based in the event database connection, it does not need an ODBC connection, see will do for you.

  I just wanted to know what operating system you are using to connect to the server and did you do Windows Update on this machine? If not done it please do.

  restart the machine try connecting the event database. It does not work please check the things mentioned in the KB below

  http://KB.VMware.com/kb/1029537

  You can do one more thing before checking the KB, if the connection to the server OS is windows 2012 and the SQL Windows 2012, take a snapshot of the VM Server conection and proceed to

  under location

  C:\Program Files\VMware\VMware View\Server\broker\shared\lib\sqljdbc-1.2.jar

  Stop all the service view in the connection to the server.

  sqljdbc - 1.2.jar and rename sqljdbc - 1.2.jar.backup.

  Download SQL JDBC 3.0 driver http://www.microsoft.com/en-us/download/details.aspx?id=21599

  extract the downloaded file and copy the sqljdbc4.jar to location (C:\Program Files\VMware\VMware View\Server\broker\shared\lib\)

  also copy same file once more and rename the file to sqljdbc-1.2.jar

  Restart all services server connection and wait 10 minutes, then check the admin page.

• Unable to connect to server to connect to view error

  I get the following error...  "Unable to connect to the view connection server. The server provided a certificate that is not valid. "See below for more details:"-l' certificate authority is invalid or incorrect.

  I got this when the broker IP or DNS has changed and that the certificate has already been installed on the host computer. Suggest you try to re - install the certificate.

  concerning

  Paul

• Unable to connect any user id of first time in content viewer Adobe (R25)

  Hello

  I use R25 Adobe content viewer. The problem is that I am unable to connect any user first time id. when I 2nd time with the same id, then do it successfully. Kindly suggest.

  Pub in DC
  

  It is a known issue with the content viewer Adobe v25. It is fixed with version v26, which is currently awaiting approval from Apple. If you have a subscription or company DPS Pro, you can create a custom Adobe viewer.

• Windows XP SP3 with view Client 5.1: unable to connect: discovers the connection connection to the server has failed

  Hi guys,.

  I need help.  I have a problem with my opinion of Client on a Windows XP SP3 computer.  When I click on connect, I get the following message immediately:

  "Failed to connect to the view connection server. Verify that the server connection mode address and network settings are correct. »

  A few details:

  My client's IP address is on the same subnet as the view connection server

  There is no firewall and DNS solves the login server see very well.  Here is the output of my customer's orders

  C:\ > nslookup X.X.X.172

  < resolves very well >

  C:\ > nslookup dd - view.viewdomain.com

  < resolves very well >

  C:\ > nslookup dd-notice

  < resolves very well >

  C:\ > tracert X.X.X.172

  < works great >

  If I open a browser on the XP workstation which is a failure, I can go to https://dd-view.viewdomain.com.  It displays the page that I need to connect with View Client. What do I think, so this should check the connectivity between the two.

  I've seen customer 5.1.0 build-704644 installed on my Windows XP SP3 client computer

  My connection to the server is running 5.1.1 build-799444 and is configured with a pool of offices 25 clone related with SSL active

  LAST IMPORTANT NOTE: I have the same version of the Client view (5.1.0 build-704644) installed on another Windows 7 workstation on the same subnet and it connects to my view connection server office pool very well.

  I tried to install the three versions of the customer view of this system of XP SP3 including the latest version, when the connection after installation, they all fail the same way. My body needs to function. The client machines can not move to something more recent to Windows XP SP3 because I am not the administrator for them.

  Any ideas?  Is this a bug or is Windows XP SP3 just not supported with view 5.1?

  VR,

  Brian Whyte

  Political of McAffee HBSS blocked 443 attempts out of the customer to view.

  The difference is that the Windows 7 machine that worked was becoming another policy HBSS applied to what was not blocking attempts.

• Unable to connect to the server with Smart View essbase

  Hello
  
  I'm having trobules connection Smart View to make ad hoc analyses, but perfectly I could establish a connection with planning and navigate web forms in Excel.
  
  The address that I use to connect to Essbase is: http:// < server >: 19000/aps/SmartView and planning url is http:// < server >: 19000/HyperionPlanning/SmartView
  
  I have already used these URLS in another server with the version 11.1.2 but now that I'm trying to connect to a server with v11.1.1.3 I can't. Whenever I connect to planning to see forms a prompt appears with the message saying that "I connect to a server with an earlier version" but I could work perfectly with the forms. When I connect to essbase, I can see the apps but I can't just do any analysis adhoc.
  
  Could someone has an idea of what could happen?
  
  Thanks in advance
  
  Published by: user9143843 on January 13, 2011 04:58

  SmartView 11.1.2 is not compatible with Essbase 11.1.1.3.

  Reference - http://www.oracle.com/technology/software/products/ias/files/fusion_certification.html

  HTH-
  Jasmine.

• Unable to connect to the software update server (127.0.0.1)

  I'm under El Capitan 10.14.4

  I'm unable to view or download from the App store apple updates. Everything else in the app store works fine except the updates and the updates, I get 3rd party updates, but nothing from apple. If I click on updates at the top of the app store icon I get the following error

  

  Troubleshooting steps I went through far

  • I restarted my mac a few times
  • I did some research on Google and messages more speak of iworm, fortunately I could find no trace of an infection by the worm, I scanned my machine using Sphos and ClamXav and haven't found anything relating to iWorm. I am also unable to find all the files, he leaves behind him, so I think I'm safe in this regard.
  • I checked the hosts file and there are no entries that should not be there, hosts file is copied below.

  # Database host

  #

  localhost # is used to configure the loopback interface

  # When the system boots.  Do not change this entry.

  ##

  127.0.0.1 localhost

  255.255.255.255 broadcasthost

  : 1 localhost

  • The /var/log/install.log which appear relevant lines are;

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: Scan for pid 435 client (/ System/Library/CoreServices/Software Update.app/Contents/Resources/softwareupdated)

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: out of time scan = 0.2

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: error in scan: error Domain = NSURLErrorDomain Code =-1004 'unable to connect to the software update server (127.0.0.1)." UserInfo = {NSErrorFailingURLKey =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, SUCatalogFetchOverrideURLString =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, NSLocalizedRecoverySuggestion = check that your network connection is working normally.} {If there is no problems with your connection, contact your network administrator for assistance., NSLocalizedDescription = can connect to the software update server (127.0.0.1)., SUErrorRelatedCode = SUErrorCodeScanCatalogNotFound, SUErrorUpdateServerName = 127.0.0.1, NSErrorFailingURLStringKey =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, _kCFStreamErrorDomainKey = 1, _kCFStreamErrorCodeKey = 61}

  May 26 09:44:02 macbook-pro softwareupdated [435]: Scan received the error unable to connect to the software update server (127.0.0.1).

  May 26 09:44:02 macbook-pro softwareupdated [435]: updates marked ramps

  • I can ping swscan.apple.com and she is resolved to 17.164.1.22 which is the same IP that also resolves the mac next to me (which gets the update)
  • I cannot telnet on port 443 to swscan.apple.com and it connects.
  • I have a mac in yosemite next to me who can see the updates so I suspect that doesn't pose any problems with the service itself rather something on why machine.
  • I started in safe mode, and while in safe mode, I get the same error.

  I am at a complete loss what to do next short of wiping and restore from a time machine backup, can anyone help please

  You can try to disable the Sophos websheild and ClamXav if she has one. Even better would be to uninstall both and test.

  FWIW, it is never a good idea to have 2 av programs installed.

• At the opening of some Web pages I get a msg 'unable to connect to the server', but it works very well in startup

  The last few days during the use of the internet, some Web pages will not be not open. I get a msg of error saying 'unable to connect to the server', but it works very well with other sites such as Facebook and YouTube.  This happens when I use Safari, Firefox and Chrome.  Yet if I'm in Safe Boot mode it works fine.  I exaggerate the App installed VPN and when I am in normal mode and connect to the VPN exaggeration, all Web pages work correctly. I searched the net for days trying to find a solution but nothing I tried worked.  I'm not very computer savvy either so don't know much of what I do with this technical stuff.  I emptied the caches, but that did not work.  Following the advice of an answer to another question on this forum that was similar to mine, I went into the Terminal and performed a diagnostic test.  I don't understand all the information in this essay so hope someone here can decipher. The report is quite long, but this is the beginning of the pasted below.  Help, please!

  The system version: OS X 10.11.1 (B 15, 42)

  Kernel version: Darwin 15.0.0

  Boot Mode: Normal

  Model: MacBookPro11, 1

  FileVault: on

  The System Diagnostics

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  Diagnosis of the user

  2016-04-12 AssetCacheLocatorService crash

  Accident of GarageBand 2016-04-12

  Kernel messages

  Apr 12 15:34:15 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 15:34:15 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 15:34:18 NTFS-fs warning (device/dev/disk0s4, pid 165): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 15:35:41 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 520; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45019

  Apr 12 16:45:59, launchd process [1]-l' system of limitation of disabling i/o level

  Apr 12 16:45:59, launchd process [1] disable the CPU - the system-wide limit

  Apr 12 16:46:31 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 16:46:31 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 16:46:33 NTFS-fs warning (device/dev/disk0s4, pid 155): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 16:47:52 iCoreService process [94] taken causing excessive Awakenings. Awakenings (per second) rate: 557; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45052

  12 apr 17:20:51 0xe00002db questioned the file opening error

  -the last message repeated 1 time.

  Apr 12 19:39:26 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 19:39:26 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 19:39:28 NTFS-fs warning (device/dev/disk0s4, pid 158): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 19:40:49 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45066

  Apr 12 20:46:58 launchd process [1]-l' system of limitation of disabling i/o level

  Apr 12 20:46:58 launchd process [1] disable the CPU - the system-wide limit

  Apr 12 20:47:21 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 20:47:21 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 20:47:23 NTFS-fs warning (device/dev/disk0s4, pid 157): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 20:48:44 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45476

  Apr 12 21:54:58 opening error 0xe00002db questioned the file

  -the last message repeated 3 times.

  Apr 13 01:42:49 deal with com.apple.WebKit [12265] wire 546051 caught fire CPU! He used more than 50% of the CPU (actual recent use: 93%) more than 180 seconds. Screw using the processor to life 90,030145 seconds, (89.468979, System 0.561166 user) information book: balance: 90000757669 credit: debit 90000757669: limit 0: 90000000000 period (50%): 180000000000 time since last filling (ns): 96164617988

  Hi AussieEgypt,

  Thank you for using communities Support from Apple.

  If a problem does not occur when it is started in safe mode, then you have already determined that the problem was isolated to a few 3rd party software running on your Mac.  Take a look at the information below to start with the removal of some elements of start-up and connection and see if the problem persists:

  Test your login items

  1. Choose the Apple menu > System Preferences, and then click users and groups.

  2. Click on your account under the current user name, and then click connection points.

     Make a list of the login items, you will need to remember later.

  3. Select all the elements of connection, and then click the button Delete .

  4. Choose the Apple menu > restart.

  5. If this solves the problem, reopen the preferences users and groups, add the elements of connection one at a time and restart your Mac after the addition of each of them.

     If the problem persists, follow the steps above to remove only the last element of connection that you added.

  OS X El Capitan: If you think you have incompatible connection points

  See you soon.

• Satellite A500 - 03P: unable to connect to the WLan using Win 7 + event message

  Hi all

  I recently bought the Satellite A500 with the offer included Windows7 while he was available late October 09.

  So I had the Toshibe DVD for the upgrade and followed the steps and Visa home premium upgrade to Windows 7. Now I have two questions.

  (1) I get a system event Notification after start, talk to me about the system event log. The full message is below.

  Unable to connect to a windows service
  Windows could not connect to the System Event Notification service. This problem prevents limited users to logon to the system. As an administrator, you can view the system event log to see why the service failed

  (2) I was able to use this laptop for the internet before the upgrade, both via a USB wireless drive as well to the office via a DSL modem.
  Now I can't access the internet after the upgarde of Windows 7!

  For example the Optus dial-up box pop up appears commandeLorsque I click on 'connect', it does not connect.

  Can anyone help please?

  Thank you
  C I

  Hey Buddy,

  (1) did you check the Configuration of the Service for this service? The Boot System Event Notification Service type must always be set to automatic. This service is absolutely necessary for Windows and shouldn't t be disabled or set to manual startup type.
  Check it!

  (2) to be honest I never heard on the internet BEFORE, but normally, it should also be possible to access the Internet with Windows 7.
  Make sure that the WLAN or LAN card is installed properly and check the TCP/IP settings. If you are missing some driver you can get on the page of Toshiba.

• Unable to connect to the internet via 3G or WiFi on Satellite A110-178

  I am not able to connect to internet with my 3G modem or wireless.
  Error messages said I should check the settings or that it is impossible to find connections.

  When I turn on the computer, I noticed that it takes longer than usual and there is an error message that says this:

  + "Unable to connect to a windows service windows is not able to connect to the System Event Notification Service service." +
  + This problem prevents limited users to logon to the system. As an administrator, you can view the system event log to see why the service did not respond. » +

  I would like more ideas on how to solve this problem. I tried to disable my antivirus program and firewall and all the things that my 3 G support
  told me to do.

  Thank you very much!
  / Lena

  Hey, Lena,.

  Have you already consulted suggests the system as event log error message? It is always an interesting thing, where you can try to find that more information on this error please check this first!

  I m not a Windows expert but check Services (start > run > services.msc). Make sure that the System Event Notification Service is run or try to restart this service.

  By the way: you can also tell us what OS you're using now?
  The driver for the wireless network adapter is updated?

• Unable to connect mifi 4510 hotspot for PC. Wireless see peripheral but does not connect... is to expire.

  mifi4510L

  Unable to connect mifi 4510 hotspot for PC. Meet operational requirements throughout the system. Using XP SP3. Wireless see peripheral but does not connect... is to expire. No msg error in Event Viewer.

  THX

  Hello

  I suggest you to try the steps below and check if it helps.

  Method 1: Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2: Try also to update the latest drivers for your device wireless using the link below.

  How to manage devices in Windows XP:

  http://support.Microsoft.com/kb/283658

  Hope this information is useful.

• After a virus, I am unable to connect to the internet. Event log messages: the NetBios over TCP/IP service failed to start due to the following error...

  original title: NETBios TCPIP of missing in Device Manager

  I recently had to run two antivirus programs on an infected computer and am now unable to connect to the internet. When I went to the event viewer, I noticed the following error messages:

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7000

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The NetBios over TCP/IP service failed to start due to the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The helpdesk TCP/IP NetBIOS depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  When I look in the Drivers folder, I see netbt, but devices & Non Plug and Play Devices, of TCPIP NETBios is not listed in Manager.

  Hi Diddy Dell,

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Unable to connect XP laptop to my wireless network. Diagnotics says 'error trying to validate the Winsock base providers' couldn't get cable or Internet.

  Unable to connect XP laptop to my wireless network. Diagnotics says 'error trying to validate the Winsock base providers' couldn't get cable or Internet.

  Hello

  Try the methods below to solve the problem.

  Method 1:

  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Method 2:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista

  http://support.Microsoft.com/kb/811259

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756